Why do I get Colored bands on some images in LR4 and LR5, but not in Aperture?

On some images -- both RAW and JPG -- when opened in LR4 or LR5, there will be one or two "curved" color abberation lines across the entire image. This doesn't occur when I open the images in Aperture. Any idea why? Thanks

>Is it possible that Aperture is showing you the camera-embedded JPG by default? What happens if you actually produce a JPG from the raw file in Aperture?
Aperture works the same way as Lightroom in this respect. It will first show you the embedded jpeg and will render a new conversion from the raw data as soon as it can. So it is possible the OP saw the embedded jpeg, but that should not last long and certainly by now should have been replaced with a newly rendered preview. Either Aperture is more forgiving of a small defect in the raw file or Lightroom import is somehow getting corrupt files of the sd card and Aperture not (would be weird). Another option is that the camera raw cache is corrupt. This can be checked by emptying the cache (Preferences->File Handling->Purge Cache). Lastly, this might be a corrupt preview in Lightroom. Check this by zooming 1:1 on an offending area in the Develop module and seeing if it goes away.
>I suspect that the curvature is in fact due to lens corrections, and that these lens corrections are always on
I believe you are right. I remember vaguely that there is some default lens correction with some cameras like this that is independent of the lens correction module. No clue whether the LX7 is one.

Similar Messages

Keep getting message that I have a valid id and password but not a valid account

keep getting message that I have a valid id and password but not a valid account

You waited 10 minutes for an answer and then decided to go away?
Good luck with your Galaxy.

Why did I get a free numbers app on my mac book air but not on my imac?

I got a free download of numbers on my mac book air but not on my imac. Why is this?

Hi Pamela,
If it was free on your Air it should be free on your iMac too. Perhaps you should doublecheck that:
Your iMac is running Mavericks (the version of Numbers available for download from the App Store requires Mavericks)
Your iMac is signed into the same App Store ID (usually, but not always, the same as the Apple ID you use to connect to iCloud) as your Air.
SG

Started getting repeat copies of deleted emails on iPhone and iPad, but not iMac...any solutions?

I've started getting repeat copies of deleted emails, every time I turn on my iPhone or iPad...but not my Mac...any solutions?
Thanks

The inkjet spam email is the same one that is causing my iPad's issue! I'm having the exact same problem as you're having --touching the email or having the email at the top of the screen freezes/shuts down ipad. I've been to two Apple stores and no one seems to know what's going on, plus, they claim they haven't heard of this problem i suggested they go to the Apple Commnity to get a feel for what's going on.
No, the issue has never been resolved!!

Printing is not correct. I can print to either my HP Photosmart printer or a pdf printer and I get the same thing. Strange looking letters and spacing but not normal reading print. Is there a way to set up my printing in version 4 beta?

Following is whart this page looks like when I print it. How do I fix this?
s k i p t o n a v i g a t i o n s w i t c h l a n g u a g e
F i r e f o x
v i s i t m o z i l l a . o r g
F e a t u r e s
F e a t u r e s
S e c u r i t y
P e r f o r m a n c e
C u s t o m i z a t i o n
V i d e o s
T o u r
M o b i l e
M o b i l e O v e r v i e w
D o w n l o a d
F e a t u r e s
C u s t o m i z e
S y n c
D e v e l o p
G e t I n v o l v e d
F A Q
B l o g
A d d - o n s
F i r e f o x A d d - o n s
F e a t u r e d A d d - o n s
E x t e n s i o n s
T h e m e s
P e r s o n a s
S e a r c h T o o l s
L a n g u a g e S u p p o r t
C o l l e c t i o n s
M o b i l e A d d - o n s
D e v e l o p e r H u b
S u p p o r t
F i r e f o x S u p p o r t
M o b i l e S u p p o r t
T h u n d e r b i r d S u p p o r t
A b o u t
A b o u t F i r e f o x
P a r t i c i p a t e
C o m m u n i c a t i o n s
C a r e e r s
P a r t n e r s h i p s
L e g a l
C o n t a c t U s
B l o g
F i r e f o x H e l p
A s k a Q u e s t i o n | F i r e f o x H e l p h t t p s : / / s u p p o r t . m o z i l l a . c o m / e n - . . .
1 o f 4 3 / 7 / 2 0 1 1 7 : 4 5 P M
W e l c o m e , D i c k S 5 7 .
P r o f i l e | S i g n O u t
1 . F i r e f o x H e l p
2 . F o r u m
3 . A s k a N e w Q u e s t i o n
A s k a N e w Q u e s t i o n
P r o d u c t : F i r e f o x 4 B e t a s c h a n g e
C a t e g o r y : I h a v e a n o t h e r k i n d o f p r o b l e m w i t h F i r e f o x
c h a n g e
F i l l i n t h e d e t a i l s o f y o u r q u e s t i o n .
T h e m o r e i n f o r m a t i o n y o u c a n p r o v i d e , t h e
b e t t e r t h e c h a n c e y o u r q u e s t i o n w i l l b e
a n s w e r e d .
Q u e s t i o n
P r i n t i n g i s n o t c o r r e c t . I c a n p r i n t t o e i t h e r m y H P
P h o t o s m a r t p r i n t e r o r a p d f p r i n t e r a n d I g e t t h e s a m e
t h i n g . S t r a n g e l o o k i n g l e t t e r s a n d s p a c i n g b u t n o t
n o r m a l r e a d i n g p r i n t . I s t h e r e a w a y t o s e t u p m y
p r i n t i n g i n v e r s i o n 4 b e t a ? e d i t
1 .
D e t a i l s
T h e m o r e i n f o r m a t i o n y o u c a n p r o v i d e t h e b e t t e r
c h a n c e y o u r q u e s t i o n w i l l b e a n s w e r e d .
2 .
3 . T h i s h a p p e n e d
4 . T h i s s t a r t e d w h e n . . .
5 . T r o u b l e s h o o t i n g I n f o r m a t i o n
A s k a Q u e s t i o n | F i r e f o x H e l p h t t p s : / / s u p p o r t . m o z i l l a . c o m / e n - . . .
2 o f 4 3 / 7 / 2 0 1 1 7 : 4 5 P M
C o p y a n d p a s t e t h e i n f o r m a t i o n f r o m H e l p >
T r o u b l e s h o o t i n g I n f o r m a t i o n .
W e ' v e m a d e s o m e e d u c a t e d g u e s s e s a b o u t y o u r
c u r r e n t b r o w s e r a n d o p e r a t i n g s y s t e m . S h o w d e t a i l s
» H i d e d e t a i l s »
6 .
7 . F i r e f o x v e r s i o n
8 . O p e r a t i n g s y s t e m
9 . I n s t a l l e d p l u g i n s
1 0 .
O t h e r L a n g u a g e s
F i r e f o x
F e a t u r e s
F e a t u r e s
S e c u r i t y
P e r f o r m a n c e
C u s t o m i z a t i o n
V i d e o s
T o u r
M o b i l e
M o b i l e O v e r v i e w
D o w n l o a d
F e a t u r e s
C u s t o m i z e
S y n c
D e v e l o p
G e t I n v o l v e d
F A Q
B l o g
A d d - o n s
F i r e f o x A d d - o n s
A s k a Q u e s t i o n | F i r e f o x H e l p h t t p s : / / s u p p o r t . m o z i l l a . c o m / e n - . . .
3 o f 4 3 / 7 / 2 0 1 1 7 : 4 5 P M
F e a t u r e d A d d - o n s
E x t e n s i o n s
T h e m e s
P e r s o n a s
S e a r c h T o o l s
L a n g u a g e S u p p o r t
C o l l e c t i o n s
M o b i l e A d d - o n s
D e v e l o p e r H u b
S u p p o r t
F i r e f o x S u p p o r t
M o b i l e S u p p o r t
T h u n d e r b i r d S u p p o r t
A b o u t
A b o u t F i r e f o x
P a r t i c i p a t e
C o m m u n i c a t i o n s
C a r e e r s
P a r t n e r s h i p s
L e g a l
C o n t a c t U s
B l o g
P r i v a c y P o l i c y | L e g a l N o t i c e s | R e p o r t T r a d e m a r k
A b u s e
E x c e p t w h e r e o t h e r w i s e n o t e d , c o n t e n t o n t h i s s i t e i s
l i c e n s e d u n d e r t h e
C r e a t i v e C o m m o n s A t t r i b u t i o n S h a r e - A l i k e L i c e n s e
v 3 . 0 o r a n y l a t e r v e r s i o n .
A s k a Q u e s t i o n | F i r e f o x H e l p h t t p s : / / s u p p o r t . m o z i l l a . c o m / e n - . . .
4 o f 4 3 / 7 / 2 0 1 1 7 : 4 5 P M

Hi , Welcome to the HP Forums! I understand that you cannot print wirelessly with your HP Photosmart Premium c310 on Mac OS X 10.9. I am happy to look into this connection issue for you! I am not sure which support pages you have been to, but here are some that I would suggest going through: 'Printer Offline' or 'Printer Not Responding' Message (OS X).Printer Does Not Maintain Wireless Connection. Tips for troubleshooting wireless connection issues
The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal. Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals. Are you able to print to the printer with any other wireless devices? Hope this information is helpful, and hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”

When I hook up to my DAQ system I don't get any valves back just 145 fluctuating up and down, but not an actual change in temp. Is something not configured right?

It's seems that the nothing on the system is giving my back accurate data, I must be missing, something in the setup. All that read is 145 when I go to test it, that's with it in a bottle of cold water. Any help would be appreciated. I'm using SCXI1102B MOD with a TBX 1314 Accessory..
Thanks In advance

nwilliams,
1. What DAQ device are you sending the conditioned data to?
2. I'm guessing you are using a thermocouple, what type of thermocouple is it?
3. I don't see the TBX 1314, did you mean a different TBX connector such as the 1303
http://sine.ni.com/nips/cds/view/p/lang/en/nid/10686
or did you mean the SCXI-1314?
http://sine.ni.com/nips/cds/view/p/lang/en/nid/3396
Regards,
Danny Funk
Danny Funk -- Staff Product Support Engineer -- InsightCM R&D -- National Instruments

Why can I get several HD channels in HD on my rooftop antenna, but the not on Fios?

Why can I get several HD channels in HD on my rooftop antenna, but not on Fios?
E.g. WABC, WNBC, WLIW and WNET come in at least 4 HD channels via my rooftop antenna but only one WLIW (non-HD) on Fios.
Bummer.
I can switch from the RF to HDMI sources but I thought with all of the channels I could at least get the ones I watch.
I'm located in Northern NJ USA, about 10 miles (line of sight) from NYC.

Rumplestiltskin wrote:
Why can I get several HD channels in HD on my rooftop antenna, but not on Fios?
E.g. WABC, WNBC, WLIW and WNET come in at least 4 HD channels via my rooftop antenna but only one WLIW (non-HD) on Fios.
Bummer.
I can switch from the RF to HDMI sources but I thought with all of the channels I could at least get the ones I watch.
I'm located in Northern NJ USA, about 10 miles (line of sight) from NYC.
I assume you get the NJ versions of those channels?
Networks pay for exclusive programming rights within specific markets. Cable operators are only allowed to offer a specific set of local channels within their designated media market (DMA). If you aren't considered to be in the NYC market, then you aren't supposed to receive those channels.
Like many in the DC area, I can pickup the Baltimore locals with an antenna, but I as I live in the DC DMA, those are the only channels I receive from Verizon, Comcast, DirecTV, etc. Note there are circumstances where a customer might fall between two markets, living in an area with overlapping DMAs; in that case, the provider can choose to offer two different sets of locals. Verizon FiOS does do that in some areas.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

Why can't i add playlists to my iPhone from my mac while they are connected? I keep getting the following message "some items (meaning all of them) were not transferred because iTunes match is enabled." This is incredibly frustrating.

I keep getting the following message "some items (meaning all of them) were not transferred because iTunes match is enabled." when I try to drag and drop a playlist, song, or album to my iPhone. This was NEVER a problem before iTunes match or the last iOS update. So what is the deal? Why can't i just add music to my phone from the mac? There is space on the phone. The only way I have found to get the music i want to the phone is to have it download from the phone. This is not something i want to have to do: go through and manually add every album and recreate a playlist on the phone when its there on the mac. And, even more irritating, since the new update, when the phone is plugged into the mac i can't actually view from the mac what music is on the phone. This is incredibly frustrating and any help would be much appreciated in managing my music libraries for each device.

Hi,
You cannot manually manage music with match turned on on your iOS device. If you want to manage music manually, you will need to turn off match on your iPhone.
Jim

, why do I get "Color Finesse requires a minimum screen size of 1024x768 yet I've got two full HD sc

Hello,
Once I try to open 'full interface' on color finesse 3 on After Effects CS5.5, why do I get: "Color Finesse requires a minimum screen size of 1024x768" yet I've got two full HD screens?
Thanks.

In addition to Dave's suggestions, if you haven't already done so, restart your computer. All we do is ask the OS for the screen size and check against 1024x768. We've seen on Windows that the OS gets confused sometimes and reports an incorrect size. Restarting fixes that.
When checking your screen size, be sure to subtract the size of the toolbar and any similar add-ons you might be running. Those all reduce the usable screen size, and we've seen cases (mostly laptops) where that reduces the height of the screen below 768.
Bob Currier
Synthetic Aperture

I cannot get GPS Only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX

It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi, it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)? Any ideas on how to get iPad working with GPS only??

Roger that. Thanks for your time.
System:
Windows 7 64bit
Processor: AMD phenom IIX4 965
RAM: Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
PSU: Kingwin 1000W laser gold (LZG-1000)
Yes. tried the one ram stick, no go. I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install. I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3. Yes I can see the Vertex 3 Drive as well as the WD drive at this point. some times I have to hit "scan" a couple of times.

HT201272 Hi guys...I have just got a new computer and want to get my library back up and running on it. However I seem to be missing some of my iTunes music purchases. Any ideas on how to get them back? They show up on my ipad but not my actual itunes acc

Hi guys...I have just got a new computer and want to get my library back up and running on it. However I seem to be missing some of my iTunes music purchases. Any ideas on how to get them back? They show up on my ipad but not my actual itunes account.

Hello there, Capricious13.
There are great pointers in the following Knowledge Base article. Depending on where you see the content and where you want to get it to, this should guide you to putting it in the right place:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

HT1491 I just purchased some songs on itunes and they are not in my library. How do I get them to my library?

I just purchased some songs on itunes and they are not in my library. How do I get them into my library? Thanks.

Hello Lori
If they are not in your iTunes library, I would check out the following article that will give steps on download the purchased song.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Thanks for using Apple Support Communities.
Regards,
-Norm G.

HT1351 Why do I have ! next to some of my songs and they dont sync?

Why do I have ! next to some of my songs and they dont sync?

I am not an expert but here's my two cents:
The exclamation point means itunes cannot find the music file in order to play it. There are several possible reasons for this, including but not limited to changing the name or location of your music library/songs, or storing them on an external hard drive or device that is not currently attached. The solutions for these are different so let me know if any of these apply and we can troubleshoot.

Why do I get a grid over my image when I first open it up?

Why do I get a grid over my image when I first open it up? I've looked in my preferences and can't find a way to have this issue stop.

Are you saying that if you turn off the Grid, it reappears the next time you open an image? That is obviously wrong, and tjhe setting is in Preferences as you surmised, so if that is what is happening, I'd try deleteing the preferences file to reset it. (Shift Alt Ctrl while you lauch Photoshop)

Some websites keep asking to enable cookies in my browser when they are and I can't get this sites to see that, they worked fine yesturday but not now, any help

Some websites keep asking to enable cookies in my browser when they are and I can't get this sites to see that, they worked fine yesterday but not now. I've restarted the browser, restarted the computer, disabled then enabled cookies in the privacy settings and still nothing. Any help?

Hi,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

Why do I get Colored bands on some images in LR4 and LR5, but not in Aperture?

Similar Messages

Maybe you are looking for