Why do I get downloads installed with two types, Ex. photoshop CC as well as photoshop CC (2014)

why do I get downloads installed with two types, Ex. photoshop CC as well as photoshop CC (2014)

http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
This messages says (at least some) CC 2014 programs use NEW plugins https://forums.adobe.com/thread/1499663
-so do not uninstall the older CC programs if you use plugins in your programs until you are sure you have plugins that work in CC2014
If you are sure you don't need the old CC programs
-http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
-read reply #3 about the ORDER of uninstalling & installing https://forums.adobe.com/thread/1242671

Similar Messages

Why do I get a folder with a question mark on bootup

why do I get a folder with a question mark on bootup
my daughters Mac and she doesn't remember which osX version she had.
can't seem to get past that flashing folder with a ? in it

A flashing question mark at boot means no start up drive can be found. Solutions vary based on what OS is installed.
Try the command and r keys held down at restart to see if it enters "recovery" mode. Use the Disk Utility to find out more about the drive.

Why do I get pdf files with an underscore in the extension ( ._pdf)

Why do I get pdf files with an underscore in the extension ( ._pdf) and how do I open them when they are email attachemnts, becuase it wont let me rename it or save it as any other version.

Not sure. What email are you using? Gmail (or web based email) by chance?
Definitely not a Reader issue if you can see the underscore in your email.
You can try saving it as is then try renaming it using Windows Explorer to see if that works.

Why can't i download yosemite with 10.6.8 osx

my late 2009 imac will not let me download yosemite with 10.6.8 osx... any suggestions?

Why? Do you meet all the requirements:
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite - System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

Why do I get parsing errors with my WSDL URL for Web Services usage

Hi,
I am puzzled with the errors I get when I want to create a Web Service datastore.
Scenario: I have created a SAP Web Service from CRM using SOAMANAGER. The WSDL URL produced by SOAMANAGER is accessibile when pasting the URL directly in Internet Explorer. WSDL URL [http://UXCIQ0M.WDF.SAP.CORP:50076/sap/bc/srt/wsdl/srvc_CBDCB34C89C29304E10000000A4282C0/wsdl11/allinone/ws_policy/document?sap-client=504]
When using the WSDL URL in the Web Service datastore URL field, I get the error An error occurred while importing metadata: WSDLException; faultcode=PARSER_ERROR: Problem parsing: The element type "br" must be terminated by matching tag "/br". (BODI-1111469) (BODI-1112446)
When I save the WSDL defintion in a local file and use a local file path, I get the errors An error occurred while importing metadata: WSDLException (at /wsdl:definitions/wsdl:portype/wsp:Policy): faultcode=INVALID_WSDL: Encountered unexpected element 'Policy. (BODI-1111469) (BODI-1112446)
My questions:
- Why do I get different parsing errors despite the fact that the XML is the same?
- The WSDL is generated by SOAMANAGER. Shouldn't it work directly when integrating with Web Services generated from an SAP environment?
- Is this related to confiurgation issue? I have set the Job Manager to Support adapter, message broker and SNMP communication
- What is the difference between the datastore of type Adapter and the datastore Web Service? In the white paper [http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/20bd5e60-11f9-2b10-2bbb-b5109cceff08?quicklink=index&overridelayout=true] it is mentioned to use the Adapter type to consume a Web Service. It is not clear to me why we have those 2 types.
Thanks & Best Regards
Isabelle

Some updates on this issue, which might help others in the community.
- Data Service doesn't support ws_policy.
- SAP NetWeaver 7.0 SOAMANAGER generate WDSL with ws_policy. In future releases, it is possible to specify not to use ws_policy
- In most cases, replacing ws_policy with standard in the URL directly, works. It doesn't work with Data Services :(.
- Replacing ALL ws_policy in the XML directly is currently the only way to have the WSDL definition being parsed properly by Data Services.

Why did I get 72 dpi solutions in AI CS5 instead of 300 dpi in Photoshop CS5!

Dear all!
I have done my file in Photoshop with 300 dpi. I have finished it and then saved it as EPS because I would like to open it in my AI CS5.
So I go to File>Open the EPS File in AI CS5. I get it with 72 dpi file in AI CS5 when I check the resolution in Effect>Documents Raster Effects Settings. Why did I get 72 dpi file in AI CS5 instead of the original file which is really 300 dpi in Photoshop?
Will it change the quality if I change from 72 dpi to 300 dpi as I wish to in the Documents Raster Effects Settings?
Please help to explain in details if possible.
Thanks a lot and best wishes.
I am looking forward to hearing from you.
My best regards,
LUCK

Luck,
To see the use the raster image in its right size along with other objects, scale it (down) to match. To go from 72 to 300 PPI you need a factor of 0.24 (proportionally), you may use multiplication by 0.24 in the Transform panel or Object>Transform>Scale with 24% .
It means I must change resolutions in Document Raster Effects Settings if I have effects raster effects created within Illustrator. Is it right?
If (and only) if you wish to have the effects at the same resolution as (one of) the raster image(s). This will depend of the actual effect, but for many effects, yes (you will have to choose one resolution if the document contains more than one).
Illy always sees raster images at 72 PPI, unless she is told otherwise.

Fgv with two types of variables

it goes something like this
i want the FGV to have a cluster of two 1D arrays of double (that will be the FGV variable). and the data that i'm "adding" is a double number/constant (whatever), this will be the added variable.
the main idea is that i want to be able to select to which one of the two i'm adding the additional number and i think it's pretty easy to accomplish with case structure and a simple boolean control (reference), that is what i've done.
the problem is that if i don't connect anything to the shift register of the FGV labview doesn't recognize it as the FGV variable i've described and if i do, it's an additional input which i don't want to use later.
in theory, i can make my additional variable to also be a cluster with two 1D arrays of type double within, however, since my input consists of only one number, i'm not sure how to accomplish it.
thanks in advance.
it would be good to know if something like this is even possible. (first option)
Solved!
Go to Solution.

I'm not sure what you are looking for. Something like this?
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Two Array FGV.png ‏15 KB

Why do i get an "open with" box when i try to start screen saver?

I have an Hp a6120n PC. When I try to install a screen saver, I get a dialog box that says open with and gives a series of suggested programs to use to open the screen saver. The same thing happens when I try to download a program from the internet. What can I do? Also, I would like to wipe my hard drive and start over. Is there some way I can do that? I am not ver computer literate so please try to explain so I can understand. This is my first computer and I bought it from my Daughter so I want to take all her information off of it.

Hi
Please find the link given below might help you to do a recovery please note all the data on the unit will be lost hence back up data before performing a recovery.
Performing an HP System Recovery
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Why is the instance not installed with AWS in my region (US instead of Europe)

Yesterday I installed the 'SAP NetWeaver Application Server ABAP & SAP Business Warehouse 7.4 SP8 on SAP HANA 1.0 SP8 [Developer Edition]' over through CAL ( caltdc.netweaver.ondemand.com ) and ended up with an instance in AWS running in region US (Virginia) instead of Europe (Ireland) where I am based.
Previously I installed 'SAP NetWeaver Application Server ABAP & SAP Business Warehouse 7.4 SP5 on SAP HANA 1.0 SP7 [Developer Edition]' which I could select in the AWS Marketplace and thereby selecting machine size and location myself.
I intended to do the same today, but could not find the current dev edition above for selection in the AWS Marketplace.
Why not?
Running both instance in parallell today I noticed a clear difference in service level between the AWS instance running in Ireland and the new one running in the US.

Thanx for this update! I have gone ahead and installed in Frankfurt and the installtion went really smooth so far so good
The only thing that is not working as I expect is the ODBC-connectivity. Maybe you can tell me what I am doing wrong.
I have added port 30015 to one of the predelivered security groups (sg-ab53b4c2).
In the 'ODBC Datasource Admin (64-bit)' I entered for server:port
ec2-XX-XX-XX-XX.eu-central-1.compute.amazonaws.com:30015
Then I have tried the following credentials:
user SYSTEM and the master password (with which I am successfully connecting in HANA Studio)
user SYSTEM and 'manager'
but get
You got any idea?

Why do I get download connection failed error message on my iPAD?

My iMAC is dead. Wanted to try to work with images stored in Creative Cloud and Dropbox. Can't download Cloud images. Keep getting the message "Download Connection Failed." Why?

PDF -> PSD

Why am I getting "download error, tap to retry" when I try to get music on my ipod?

I tried to download a few albums from itunes through my ipod and it downloaded a few song but now all I get is the message "download error, tap to retry." How do I get the download to continue since it has already taken the money out of my account?

Hello HONEYBUN8679,
Thanks for visiting Apple Support Communities.
It sounds like you see the error message "unsupported colorspace" when trying to print with your Epson Stylus DX8400. It can be hard to say why this error has occured, and there are some troubleshooting steps that can help resolve it.
First, make sure you've used Software Update to download the latest printer drivers, as mentioned here:
OS X: Printer and scanner software available for download - Apple Support
Use Software Update before connecting your printer or scanner. This updates the list of the latest supported printer and scanner models on your Mac. If you don't use Software Update before trying to connect a new printer, you might not see available software when you connect your device. If you're using a Wi-Fi printer, be sure to connect your printer to your Wi-Fi network before adding it to your Mac.
Next, remove the printer from the Printers & Scanners section of System Preferences, restart your Mac, and re-add the printer. See this troubleshooting guide for detailed help with this step:
Troubleshooting printer issues in OS X - Apple Support
Delete the affected printer, then add the printer again.
If you still see the error message, you may want to check with the manufacturer for additional printer software downloads and more help:
Contact the printer vendor or visit their website for further assistance.
EPSON
Company website
All the best,
Jeremy

Start up times vary - why? (MBP 10.8.3 with two drives)

I have a new MBP with 10.8.3 and two drives, an SSD and an internal.
Just curious as to why I get two varied startup times.
1. press startup button and within 3 seconds I hear the chime and the screen lights up.
2. press startup button and within about 12 seconds I hear the chime and the screen lights up.
Any thoughts as to why?

1 and 2 are both the same. I'm assuming I am starting up from the SSD drive because that is where all my applications are. The internal drive is just for storage.

Why am I getting eval controls with licensed version of Measurement Studio?

I attempted to use the datasocket 4.0 and UI 7.0 control in Visual Basic 6. Both controls are labeled "Eval", and after 30 days, I got the "controls will work for 5 minutes" message. I have a licensed version of Measurement Studio and cannot understand why the contols are evaluation. I tried the ActiveX License Fixer Utility and no controls show up in ANY pane of the utility.
I have done the following:
1) Uninstalled Measurement Studio
2) unregistered the controls and nids.dll
3) Reinstalled Measurement Studio
4) Installed Measurement Studio on a new PC with no previuos NI software. The same issue occurs

kwd,
The reason that you are still seeing the evaluation message is that you have not yet installed licensed controls. You have Measurement Studio 7.0, which is for .NET and includes assemblies with UI controls and analysis functions for use with C# and VB.NET. However, since you have the enterprise edition, you should also have a second CD that says "Measurement Studio Enterprise Support for Visual Studio 6.0" and this is the CD that will install the ActiveX controls for use with VB6. Once you run through the install of this CD, you will then have a license copy of the Measurement Studio controls and if you still get the message, then run the license fixer one more time and you will see the appropriate controls. Please repost if you have any questions. Thanks and have a good one.
Adam B.
Applications Engineer
National Instruments

Why do I get"cannot install" Flash 26 as I may have another Adobe Flash Player installed ?

I'm trying to upload to the latest AFP 26 but after it installs it says " failed because you may be running AFB or part thereof in your machine" or some what phrased like that. Can anyone tell me why - after I've scrubbed all add-ons and extensions and programmes of AFP etc.- I can't get the new download to take? I've tried over and over and no luck...Help...I'm miserable.

What is your operating system & version?
What is your web browser & version?
What is the exact message you are getting (a screenshot would be helpful)? (I have no idea what "AFB" is.)

Why am I getting an install error when I try to update my Acrobat XI Pro?

I keep getting these errors after I install Acrobat XI Pro

uninstall, clean and then reinstall.
if that's a stand-alone installation, Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs

Why do I get downloads installed with two types, Ex. photoshop CC as well as photoshop CC (2014)

Similar Messages

Maybe you are looking for