Why do I get error message 1712 when I try to open my iDVD files
I am really new to this, so forgive a stupid question...but why do I get an error 1712 message when I try to open my iDVD files in My Documents? What have I done wrong? Also, I was told that it is impossible to completely delete an iDVD project in iDVD06 accidentallly, but I think I proved it can be done. How do I go about finding it again? Thank you from an old grammy.
OK, I`m a PC user, not MAC (but I have an IPhone 5 and Ipod Touch). I am using a Hewlett Packard HP Z 800 Professional workstation with 32 GB of RAM. My graphic card is NVIDIA GTX 670, the "monitor"" is a brand new SONY Bravia Full HD Televison set, connected by HDMI cable, 1.4 HDMI standard. Because the Iphone is new, I happened to browse the Itunes Shop and purchased the first episodes of the NIKKITA series. Runs perfectly. Yesterday I therefore invested into a larger bibliotheque of movies and single episodes of series. Not ONE single item is running on any of my 5 computers. (All run Windows 7 64 Bit and the newest Itunes version is installed).
Because I always was a PC User, in principal pay for downloads but also in principle boycot DRM disabled items for the very same reason I experience now (DRM is blocking the legal use, not the illegally downloaded and cracked versions), I might have misunderstood the message circulating some time ago, APPLE aborting the "DRM abuse". Legally the situation is an "inverse ripping" situation. Not the mean illegal downloader of copyrighted material damages the poor starving author or movie industry, but the industry is damaging (or preventing) the use of perfectly legal purchased materials and sold non funtional material, which is against all laws in the world. I`ll remember it when they againn complain of decreasing sales and the end of the world. For myself the solution is not to purchase ANY of those bogus video, music or software files until any disabling software codes or hardware features are removed. If APPLE wants to do me a favor they could indicate if video files are HDCP -impaired or not or contain any other uninvited "user" of my property. (Of course my equipment would be HDCP ready. However I am not.)
Similar Messages
-
Why do I get error message HDCP when I try to stream?
when try to stream a rented movie from iTunes I get error message with HDCP?
OK, I`m a PC user, not MAC (but I have an IPhone 5 and Ipod Touch). I am using a Hewlett Packard HP Z 800 Professional workstation with 32 GB of RAM. My graphic card is NVIDIA GTX 670, the "monitor"" is a brand new SONY Bravia Full HD Televison set, connected by HDMI cable, 1.4 HDMI standard. Because the Iphone is new, I happened to browse the Itunes Shop and purchased the first episodes of the NIKKITA series. Runs perfectly. Yesterday I therefore invested into a larger bibliotheque of movies and single episodes of series. Not ONE single item is running on any of my 5 computers. (All run Windows 7 64 Bit and the newest Itunes version is installed).
Because I always was a PC User, in principal pay for downloads but also in principle boycot DRM disabled items for the very same reason I experience now (DRM is blocking the legal use, not the illegally downloaded and cracked versions), I might have misunderstood the message circulating some time ago, APPLE aborting the "DRM abuse". Legally the situation is an "inverse ripping" situation. Not the mean illegal downloader of copyrighted material damages the poor starving author or movie industry, but the industry is damaging (or preventing) the use of perfectly legal purchased materials and sold non funtional material, which is against all laws in the world. I`ll remember it when they againn complain of decreasing sales and the end of the world. For myself the solution is not to purchase ANY of those bogus video, music or software files until any disabling software codes or hardware features are removed. If APPLE wants to do me a favor they could indicate if video files are HDCP -impaired or not or contain any other uninvited "user" of my property. (Of course my equipment would be HDCP ready. However I am not.) -
Why do I get error 150:30 when I try and send a photo to Elements 8?
Why do I get error 150:30 when I try and send a photo to Elements 8 from a PC with windows8?
My wife had this problem for the past few days for a specific phone number. These instructions fixed it -- without having to restore from backup or contact the carrier.
http://www.timothydeblock.com/blog/2014/5/12/fix-message-sent-using-invalid-numb er-of-digits-msg-2114
Open Contacts -> select the contact -> select edit -> scroll all the way to the bottom and delete contact (delete multiple entries of the same phone number, my wife had five).
Open the Messages app -> select Edit -> select the red circle and then select delete. Do this for both the person and the messages you received.
Open the Settings app -> scroll down and select Messages -> turn off messages, by selecting the switch, and any other options turned on.
Turn off your phone and then turn it back on.
Go straight to messages and compose a new message and put in the phone number of the person you're trying to text. Send and that person should receive the text message. Add the person to your contacts and go back into message settings to turn on any other options you want on that you turned off.
John -
Why do I get "error on page" when I try to contact anyone at apple anywhere?
Why do I get "error on page" when I try to contact itunes billing support?
Yes, I have NI-Watchdog 2.1.5 installed on my FP.
In fact, I figured out what the Error-22011 problem was all about and I'm almost too embarrassed to say. I had Watchdog Configure.vi inside a while loop... so only the first iteration would be error free and for every iteration after that, the hardware would be "already in use". Hence, Error-22011.
I've made it over that hurdle, but I'm still having problems.
Now,I have both Watchdog Configure.vi and Watchdog Clear.vi outside the while loop and I put Watchdog Whack.vi inside the while loop (mainly to monitor the watchdog status output). I also wired the occurrence output of Watchdog Configure.vi to a second while loop in which there is a wait for occurrence.vi wired to a boolean indicator.
If I disconnect the ethernet cable while this vi is running, the program pauses and I get a Labview generated message informing me of a lost connection however, there is no occurrence generated and the watchdog stays in "running" status.
Apparently, I've misunderstood how to implement the watchdog vi's and I'll need someone to set me straight.
Is there anyone who can help?
Thanks,
pmac -
HT201413 I keep getting error message (26) when I try to restore my iPod touch 3G
I keep getting error message (26) when I try to restore my iPod touch 3G
Try:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server -
TS3694 Why am I getting error code 3194 when i try to restore my ipod?
Why am I getting error code 3194 when I try to restore my ipod touch 4th generation
This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
http://support.apple.com/kb/TS3694#error3194
Also see:
iPhone Error 3194 - How to Fix iTunes Error 3194? -
After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes". So, now after the upgrade, I cannot access iTunes. How do I resolve this??
Thankszepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
missing files.. ( pictures) why am i getting this message every time i try to open a pic.. JUST downloaded PSE12@
Hi,
When you are looking at the small pictures in the organizer, you are seeing the thumbnails that were stored within the organizer catalog when you first imported them into the organizer. When you first imported the files, the organizer saved the location of that file and the pointer to the thumbnail. When you try to edit or print the image, the organizer can no longer find the image at the stored location - the file is missing.
You might like to read through this to see if it helps explain things to you
Photoshop Elements (PSE) knowledge base.
The changing drive letter is the most common cause when images are stored on an external drive.
I'm not sure what you mean about when you say "did not go back into categories like I had them on version 7".
If you updated to version 12 from version 7 on the same PC, there was no need to move any of the images so they should be in the same folders as before. The catalog should have been converted for you (if you allowed it) and so all your albums and tags should have been preserved.
Brian -
Error(not code #) when I try to open a JPG file in PhotoshopCS3
I get a program error(not code #) when I try to open a JPG file in PhotoshopCS3 containing smart objects.
I am running OS 10.5 on Intel Mac.
Appreciate any feedbackIs it really a JPG file if it has a smart object within?
-
Keep getting error code 10657 when I try to open certain applications?
Hi! I keep getting an error code when I try to open certain applications, such as iTunes or Adobe PhotoShop... it reads error 10657?
See this archived discussion: https://discussions.apple.com/message/7005768?messageID=7005768
Bob -
Why am I getting error message R6034 when I update iTunes on my PC?
When trying to load iTunes update 11.1.4 on my Windows XP workstation, the installer generated an error message:
Runtime Error
Program:C:\Program Files\Common Fil....
R6034
An application mad an attempt to load the C runtime library incorrectly.
Please contact the application support team for more information
ITunes is now disabled on the workstation. I have tried downloading the update frorm the website with the same resulting error message
ITunes is disabled and will not function on my workstation...this is frustrating as a long time iTunes client.goddesslileth,
Could you provide the specific model you are referring to with this question?
Typically, a low memory message is given when applications running have used up all the available memory that is installed in the system. There are a couple ways around this:
Add additional memory to your system to the maximum amount it will support (if possible).
Ensure that all other applications or installed programs you are not using are not running in the background. Background applications or installed programs tend to continue to use memory to keep themselves up to date, for example, a web browser constantly updating it's page(s) for the most up to date information. -
I Get error message -3221 when I try to connect to iTunes store and can not connect
I had just updated iTunes when I started getting -3221 message and unable to connect. I show my firewall allows iTunes but Can not figure out why it is not working.
have a look at:
Possible iTunes Store errors
iTunes: Advanced iTunes Store troubleshooting -
I get error message '-108' when I try to finalise my project
I get this error message when I tried to finalise my project. I can export it to quicktime, but this doesn't put it into my itunes library etc. Any ideas?
-108 basically means "out of memory (RAM)".
Try a restart of the Mac just before finalizing to release RAM. -
Getting error message 0x00000bbb when I try to print
Printer has stopped printing. Getting subject error message 0x00000bbb
argraffydd wrote:
I have this problem and I can't print. I've uninstalled and reinstalled and the problem persists so that although I'm told installation is completed, when it attempts to print a test page, the error message comes up saying:
'operation could not be completed (error 0x00000bbb). Unable to create a print job.
Please help, I urgently need pages printed. Thanks
Can you let me know what specific model printer you are using?
Thanks
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
Why do I get Error invalid number when I try to send a text to my husband?
I tried to send my husband a text this afternoon from my phone. I keep getting a message from +1 (1) (216) 116-11. It says the following:
7657905 Error Invalid Number
Please resend using a valid 10 digit mobile number or valid short code. HELP!My wife had this problem for the past few days for a specific phone number. These instructions fixed it -- without having to restore from backup or contact the carrier.
http://www.timothydeblock.com/blog/2014/5/12/fix-message-sent-using-invalid-numb er-of-digits-msg-2114
Open Contacts -> select the contact -> select edit -> scroll all the way to the bottom and delete contact (delete multiple entries of the same phone number, my wife had five).
Open the Messages app -> select Edit -> select the red circle and then select delete. Do this for both the person and the messages you received.
Open the Settings app -> scroll down and select Messages -> turn off messages, by selecting the switch, and any other options turned on.
Turn off your phone and then turn it back on.
Go straight to messages and compose a new message and put in the phone number of the person you're trying to text. Send and that person should receive the text message. Add the person to your contacts and go back into message settings to turn on any other options you want on that you turned off.
John
Maybe you are looking for
-
IPhone 4 - iPod app plays music/podcasts with reverb - How do I make it stop?
Hello! Recently, when I play music or podcasts from my iPhone 4, whether into headphones, from the phone itself, or connected to speakers, it plays it with a sort of echo or reverb. It does not do this when I am on speaker phone. I can't think of w
-
I recently updated iTunes to version 10.3.1.55. Since then when I try to sync my IPod classic it says on the top of iTunes (where the barbers pole is) "Step 1of1 Determining Tracks to Sync". This stays like that for about 15 minutes before a message
-
Directory change - files need to be located
hi, i recently disconnected by external drives containing all my media and then re-connected them, but the drive identifications changed (changed from f: to g: etc). So now all of my music files in iTunes need to be located. Is there a way iTunes can
-
Changes made in iWeb aren't registering!
I've been using iWeb since the week it was released, but i'm experiencing a new problem while using my Core Duo iMac: any changes made on any page aren't registering. that is, i can change content on a page and the 'publish' icon stays unusable, and
-
Smart Collection Criteria (keywords)
I'm just starting to create some Smart Collections, which is a nice feature that I'm trying to understand. I've read some of the tips and tricks, but I'm trying to figure out something: I want to create a smart collection that has a particular keywo