Why do I get "error on page" when I try to contact anyone at apple anywhere?

Why do I get "error on page" when I try to contact itunes billing support?

Yes, I have NI-Watchdog  2.1.5 installed on my FP.
In fact, I figured out what the Error-22011 problem was all about and I'm almost too embarrassed to say. I had Watchdog Configure.vi inside a while loop... so only the first iteration would be error free and for every iteration after that, the hardware would be "already in use". Hence, Error-22011.
I've made it over that hurdle, but I'm still having problems.
Now,I have both Watchdog Configure.vi and Watchdog Clear.vi outside the while loop and I put Watchdog Whack.vi inside the while loop (mainly to monitor the watchdog status output). I also wired the occurrence output of Watchdog Configure.vi to a second while loop in which there is a wait for occurrence.vi wired to a boolean indicator.
If I disconnect the ethernet cable while this vi is running, the program pauses and I get a Labview generated message informing me of a lost connection however, there is no occurrence generated and the watchdog stays in "running" status.
Apparently, I've misunderstood how to implement the watchdog vi's and I'll need someone to set me straight.
Is there anyone who can help?
Thanks,
pmac

Similar Messages

  • TS3694 Why am I getting error code 3194 when i try to restore my ipod?

    Why am I getting error code 3194 when I try to restore my ipod touch 4th generation

    This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect.  For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
    Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
    http://support.apple.com/kb/TS3694#error3194
    Also see:
    iPhone Error 3194 - How to Fix iTunes Error 3194?

  • Why do I get error 150:30 when I try and send a photo to Elements 8?

    Why do I  get error 150:30 when I try and send a photo to Elements 8 from a PC with windows8?

    My wife had this problem for the past few days for a specific phone number. These instructions fixed it -- without having to restore from backup or contact the carrier.
    http://www.timothydeblock.com/blog/2014/5/12/fix-message-sent-using-invalid-numb er-of-digits-msg-2114
    Open Contacts -> select the contact -> select edit -> scroll all the way to the bottom and delete contact (delete multiple entries of the same phone number, my wife had five).
    Open the Messages app -> select Edit -> select the red circle and then select delete. Do this for both the person and the messages you received.
    Open the Settings app -> scroll down and select Messages -> turn off messages, by selecting the switch, and any other options turned on.
    Turn off your phone and then turn it back on.
    Go straight to messages and compose a new message and put in the phone number of the person you're trying to text. Send and that person should receive the text message. Add the person to your contacts and go back into message settings to turn on any other options you want on that you turned off.
    John

  • Why do I get error message 1712 when I try to open my iDVD files

    I am really new to this, so forgive a stupid question...but why do I get an error 1712 message when I try to open my iDVD files in My Documents? What have I done wrong? Also, I was told that it is impossible to completely delete an iDVD project in iDVD06 accidentallly, but I think I proved it can be done. How do I go about finding it again? Thank you from an old grammy.

    OK, I`m a PC user, not MAC (but I have an IPhone 5 and Ipod Touch). I am using a Hewlett Packard HP Z 800 Professional workstation with 32 GB of RAM. My graphic card is NVIDIA GTX 670, the "monitor"" is a brand new SONY Bravia Full HD Televison set, connected by HDMI cable, 1.4  HDMI standard. Because the Iphone is new, I happened to browse the Itunes Shop and purchased the first episodes of the NIKKITA series. Runs perfectly. Yesterday I therefore invested into a larger bibliotheque of movies and single episodes of series.  Not ONE single item is running on any of my 5 computers. (All run Windows 7 64 Bit and the newest Itunes version is installed).
    Because I always was a PC User, in principal pay for downloads but also in principle boycot DRM disabled items for the very same reason I experience now (DRM is blocking the legal use, not the illegally downloaded and  cracked  versions), I might have misunderstood the message circulating some time ago, APPLE aborting the "DRM abuse". Legally the situation is an "inverse ripping" situation. Not the mean illegal downloader of copyrighted material damages the poor starving author or movie industry, but the industry is damaging (or preventing) the use of perfectly legal purchased materials and sold non funtional material, which is against all laws in the world. I`ll  remember it when they againn complain of decreasing sales and the end of the world. For myself the solution is not to purchase ANY of those bogus video, music or software files until any disabling software codes or hardware features are removed. If APPLE wants to do me a favor they could indicate if video files are HDCP -impaired or not or contain any other uninvited "user" of my property. (Of course my equipment would be HDCP ready. However I am not.)

  • Why do I get error message HDCP when I try to stream?

    when try to stream a rented movie from iTunes I get error message with HDCP?

    OK, I`m a PC user, not MAC (but I have an IPhone 5 and Ipod Touch). I am using a Hewlett Packard HP Z 800 Professional workstation with 32 GB of RAM. My graphic card is NVIDIA GTX 670, the "monitor"" is a brand new SONY Bravia Full HD Televison set, connected by HDMI cable, 1.4  HDMI standard. Because the Iphone is new, I happened to browse the Itunes Shop and purchased the first episodes of the NIKKITA series. Runs perfectly. Yesterday I therefore invested into a larger bibliotheque of movies and single episodes of series.  Not ONE single item is running on any of my 5 computers. (All run Windows 7 64 Bit and the newest Itunes version is installed).
    Because I always was a PC User, in principal pay for downloads but also in principle boycot DRM disabled items for the very same reason I experience now (DRM is blocking the legal use, not the illegally downloaded and  cracked  versions), I might have misunderstood the message circulating some time ago, APPLE aborting the "DRM abuse". Legally the situation is an "inverse ripping" situation. Not the mean illegal downloader of copyrighted material damages the poor starving author or movie industry, but the industry is damaging (or preventing) the use of perfectly legal purchased materials and sold non funtional material, which is against all laws in the world. I`ll  remember it when they againn complain of decreasing sales and the end of the world. For myself the solution is not to purchase ANY of those bogus video, music or software files until any disabling software codes or hardware features are removed. If APPLE wants to do me a favor they could indicate if video files are HDCP -impaired or not or contain any other uninvited "user" of my property. (Of course my equipment would be HDCP ready. However I am not.)

  • Why do I get Error-2201​1 when I try to run a HW Watchdog Timer vi?

    I am trying to use the HW watchdog timer vi's on the RT functions palette (Watchdog Configure.vi and Watchdog Clear.vi). Error-22011 is generated when Watchdog Open.vi is called (a subvi to Watchdog Configure.vi).
    "Explain Error" gives this result:
    "NI-Watchdog: The watchdog hardware you requested is already in use, or has been permanently locked."
    I get this error every time I execute Watchdog Configure.vi even if the host computer and network controller have just been rebooted. There is no place to specify or lock/unlock the hardware (that I can find). I'm using Windows XP, LV8.5, and the FP2010 controller.
    Thanks in advance for any help.
    pmac

    Yes, I have NI-Watchdog  2.1.5 installed on my FP.
    In fact, I figured out what the Error-22011 problem was all about and I'm almost too embarrassed to say. I had Watchdog Configure.vi inside a while loop... so only the first iteration would be error free and for every iteration after that, the hardware would be "already in use". Hence, Error-22011.
    I've made it over that hurdle, but I'm still having problems.
    Now,I have both Watchdog Configure.vi and Watchdog Clear.vi outside the while loop and I put Watchdog Whack.vi inside the while loop (mainly to monitor the watchdog status output). I also wired the occurrence output of Watchdog Configure.vi to a second while loop in which there is a wait for occurrence.vi wired to a boolean indicator.
    If I disconnect the ethernet cable while this vi is running, the program pauses and I get a Labview generated message informing me of a lost connection however, there is no occurrence generated and the watchdog stays in "running" status.
    Apparently, I've misunderstood how to implement the watchdog vi's and I'll need someone to set me straight.
    Is there anyone who can help?
    Thanks,
    pmac

  • Why do I get Error invalid number when I try to send a text to my husband?

    I tried to send my husband a text this afternoon from my phone. I keep getting a message from +1 (1) (216) 116-11. It says the following:
    7657905 Error Invalid Number
    Please resend using a valid 10 digit mobile number or valid short code.  HELP!

    My wife had this problem for the past few days for a specific phone number. These instructions fixed it -- without having to restore from backup or contact the carrier.
    http://www.timothydeblock.com/blog/2014/5/12/fix-message-sent-using-invalid-numb er-of-digits-msg-2114
    Open Contacts -> select the contact -> select edit -> scroll all the way to the bottom and delete contact (delete multiple entries of the same phone number, my wife had five).
    Open the Messages app -> select Edit -> select the red circle and then select delete. Do this for both the person and the messages you received.
    Open the Settings app -> scroll down and select Messages -> turn off messages, by selecting the switch, and any other options turned on.
    Turn off your phone and then turn it back on.
    Go straight to messages and compose a new message and put in the phone number of the person you're trying to text. Send and that person should receive the text message. Add the person to your contacts and go back into message settings to turn on any other options you want on that you turned off.
    John

  • Why am I getting error code 62 when I try to download the Creative Cloud Set up?

    Error Code 62

    Ty to perform the steps mentioned on below link
    https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html

  • Why am I getting error code 1402 when trying to update adobe reader 10?

    Why am I getting error code 1402 when trying to update adobe reader 10?

    Impossible to guess the "why" with so little information, but this may be helpful if you want to solve the problem: Error 1402 | Error 1406 | Acrobat, Reader

  • Why do i get error code 0x80020063 when burning pics to CD in Finder? Burns from iTunes fine

    Why do i get error code 0x80020063 when burning pics to CD in Finder? Burns from iTunes fine

    Hey Ken 17,
    Thanks for the question. I understand that you are experiencing issues burning a disc in Finder. The following resource may provide a solution:
    OS X Mavericks: If you have trouble burning discs
    http://support.apple.com/kb/PH13990
    Thanks,
    Matt M.

  • I have a 5th generation Nano. I am using a new PC with the latest Itunes.  I am getting error coe 13019 when I try to sync. I have tried the recommended fixes from diagnostics. Any ideas?                                     .

    I have a 5th generation Nano. I am using a New PC and latest Itunes. I am getting error code 13019 when I try to sync. I have no problem syncing with an Iphone 4S or an Ipad2. I have tried the procedures described in diagnostics, but without success. Any ideas?
    Thank you,
    Derek

    I have tried the procedures described in diagnostics, but without success.
    Quickly doublechecking ... that's the procedures from the following document?
    iTunes: Error 13019 during sync

  • Get error code 0x80070643 when I try to install Sql Server 2008 R2 Service Pack 1 (KB2528583)

    I keep getting error code 0x80070643 when I try to install Sql Server 2008 R2 Service Pack 1 (KB2528583)
    Operating System is Windows 2008 R2 64 bit

    Hi JamesRead,
    According to your description, when you install SQL Server 2008 R2 service pack 1, we need to verify if
    you must have administrative rights on the computer.
    There are multiple files available for the download, you will be prompted to select the files you need. We need to verify if you run the SQLServer2008R2SP1-KB2528583-x64-ENU.exe. Or you can install SQL server updates from the command
    prompt and check if it can install successfully.
    You can prepare an installation of database engine instance to include product update:
    setup.exe /q /IAcceptSQLServerLicenseTerms /ACTION=PrepareImage /UpdateEnabled=True /UpdateEnabled=True /UpdateSource=<path where the update is downloaded> /INSTANCEID=<Instance ID> /FEATURES=SQLEngine
    For more information, you can review the following article about installing Updates from the Command Prompt.
    http://technet.microsoft.com/en-us/library/dd638066.aspx
    Thanks,
    Sofiya Li
    If you have any feedback on our support, please click here.
    Sofiya Li
    TechNet Community Support

  • HT201413 I keep getting error message (26) when I try to restore my iPod touch 3G

    I keep getting error message (26) when I try to restore my iPod touch 3G

    Try:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

  • TS3694 I am getting error code 3194 when i try to update my iphone 4S to IOS 6.1.3. How can i resolve this

    I am getting error code 3194 when i try to update my iphone 4S to IOS 6.1.3. How can i resolve this?

    Here you go:  http://lmgtfy.com/?q=iphone+error+3194

  • I get error code 6 when i try to reinstall cs4design premium back onto my laptop

    i get error code 6 when i try to reinstall cs4design premium back onto my laptop
    anyone know what i should do? i need this for work

    seen mant treads on error code 6
    https://forums.adobe.com/search.jspa?sort=updatedDesc&q=Error+%22code+6%22&place=%2Fplaces %2F1413024

Maybe you are looking for

  • Select for update query

    with : resultset = stmt.executeQuery("select nxtid from mytable .. for update"); I have the ora-1002 Erreur. Could you help me. null

  • Enable E-mail functionality for RFQ/PO.

    Hi All, I have a requirement to enable E-mail functionality to send the PO/RFQ output to the Vendor. Whenever we go to the messages in the PO ME22N or ME23N & click on the out message, we should get a pop up asking to enter the E-mail address. Please

  • ESXi 4 Solaris 10 Install Internet problems

    Hi, I am fairly new to solaris. I am looking into ZFS and decided to bring up a machine on my ESXi box to test. The install goes great, as do the vmware tools. I am able to ping dns and IP internal and external. However when i attempt to browse to a

  • I want to pencil in unconfirmed dates. Can I do this?

    In ical is it possible to pencil in unconfirmed dates?

  • Font Licensing for Band Merch

    so im only a student and i dont really know about this kind of stuff! i was asked to create a band logo, and in it i used a Didot medium typeface, and Futura medium. These are going to be used a number of times by the band for example on CDs/t shirts