Why do I get iMessage failed update date and time in settings

My iphone5 keeps changing it time zone on it's own and I keep getting a notification in messages saying iMessage failed update your date and time in settings.  I have update it several times and it's keep doing it.  Now it's just frustrating.  How can I take care of this problem for good. 

I have also been getting the message ever since I got my iPhone 5 on September 12.  I have to reboot the phone to fix the problem or turn the "Set Automatically" off and then back on. This is a glitch likely with Apple's iOS software, but my Verizon store said that have received numerous complaints on this issue, but no patch has been released for it as of yet.

Similar Messages

  • "imessage failed" your date and time settings need to be updated

    Getting this error on my VZW iPhone 5. Had it set to automatically get the time from the network so I changed it and set the time manually and it is still happening. The messages appear to go thru even though I get the error. Any ideas? Also...the *228 that you used to dial from a VZW phone to update the network settings appears to be blocked from an iPhone 5.

    Me to I'm getting this

  • How can I get rid of the dates and time on my Notes

    How do I get rid of the dates and times on my Notes that appeared when I updated to 8?

    Yes, it's seems like a poor design decision.
    By putting the date on the line below the Note title in the Notes Index, the app shows half the number of notes per page AND if you have a large number of notes, it takes twice as long to stroll down.
    I doubt the designer actually uses the app. 
    TSAW

  • HT202157 Apple TV says it is updating date and time after a power outage here.  But nothing happens.  The wheel just keeps spinning.  What do I do to be able to use my apple tv?

    Apple TV says it is updating date and time after a power outage. But the wheel just spins and nothing happens..  The software is updated and my wifi router is on and working fine and recognized by the Apple TV.  How do I get Apple TV to work again?

    Thanks for the tip.  Unfortunately "Restart" did not change the situation.  I then used the "Restore" option.  After about 45 minutes of the unit going through the process, Apple TV was up and running again.

  • I need to get the Current System Date and time in the format

    I need to get the Current System Date and time in the format
    *6/24/2009 11:30:29 AM*
    How do i do it ?

    I seem to be saying this a lot lately.
    Google is your friend.
    I googled "java current date format" and SimpleDateFormat featured prominently in the results.

  • Can I get the Requisition Submitted Date and Time in Emails

    Can I get the Requisition Submitted Date and Time in Emails
    Hi,
    Is there a way to get Requisition submitted Date and Time in Service Initiation Emails.

    Unfotunately, there is not a namespace that will return Submitted Date for a requisition or service. You can, however, get the start date:
    #Requisition.StartedDate# or #Service.Requisition.StartedDate#

  • Continuous updating date and time

    trying to login to appletv but screen stay on Updating Date and Time.  I have confirmed WiFi is connected and have reset per instruction.

    Hello
    I wrote upon Automator for those using 10.5 which gives the ability to record the user's actions in a process file which may be replaid later.
    With 10.4.x this feature doesn't exists.
    This is a very good reason to switch to 10.5
    You are lucky, insomniae strikes again so here is the announced brute force script.
    Copy the script in the clipboard
    Paste in a blank window of Script Editor
    Save it as an application
    Move the newly created application into the folder:
    <startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Pages:
    Now, enter your Pages document.
    Click in the header.
    Go to
    menu Scripts > saveWithCurrentDateInHeader
    The contents of the header will be replaced by the current date/time
    and the document will be saved exactly as if you pressed cmd + s
    Yvan KOENIG
    26 janvier 2008
    --(SCRIPT saveWithCurrentDateInHeader.app]
    property theApp : "Pages"
    tell application theApp
    activate
    tell application "System Events" to tell application process theApp
    keystroke "a" using {command down} (* print *)
    set cd to current date
    set the clipboard to (cd as text)
    keystroke "v" using {command down}
    keystroke "s" using {command down}
    end tell -- System Events …
    end tell --theApp
    -- [/SCRIPT]
    As you may read, there are more lines to explain the use of the beast than for the code itself
    As I am unable to activate the dialog allowing us to adjust the date whe it is inserted the official way, I simply paste the current date-time into the header.
    Just click tnto the header of the current page. It will be automatically reported into other pages's header.
    Yvan KOENIG (from FRANCE samedi 26 janvier 2008 4:48:47)

  • HT202157 I am in the process of updating my apple tv and it seems to be stuck on updating date and time.

    I am in the process of updating my apple tv and it seems to be stuck on updating date and time.

    Is your Apple TV connected to a Wi-Fi network and does it have a valid IP address?
    You can find some general info about connecting it to the Internet here -> Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections

  • How to automatically update date and time on Numbers spreadsheet

    Would like to have printed version of Numbers spreadsheet reflect present date and time.  I know how to do this in Excel, but can't figure out how to get there in Numbers.

    Add the date and time to the Header or Footer in the Print Dialog via the Insert menu.
    It is only semi-automatic, in that to update the date and time, you must either delete and reinsert the date and time, or you must open the token and update by clicking the Set to Today button.
    Jerry

  • How to get the latest Change date and time of a M.O. from View VIAUFKST

    Hi All,
    I want to get the latest date and time of a M.O. from view
    VIAUFKST. I have written the query like this...
      SELECT AUFNR
             AEDAT  " Changed Date
             AEZEIT " Changed Time
        FROM VIAUFKST
        INTO TABLE I_VIAUFKST
       WHERE AEDAT >= W_LASTRUN_DATE
       ORDER BY AEDAT DESCENDING.
    but its not giving me right results... Pls help me out on this or suggest me the right approach to achieve the same...As this is very critical issue...
    Advance Thanks and Points Gauranteed...
    Suresh

    > SELECT AUFNR
    >          AEDAT
    >          AEZEIT
    >     FROM VIAUFKST
    >     INTO TABLE I_VIAUFKST
    >    WHERE AEDAT >= W_LASTRUN_DATE.  
    >
    >   IF NOT I_VIAUFKST[] IS INITIAL.
    >    SORT I_VIAUFKST BY AEDAT AEZEIT DESCENDING.
    >    READ TABLE I_VIAUFKST INDEX 1.
    >   ENDIF.
    >
    > The above statement is giving me different results...
    > such as...
    >
    >  1. 30/11/2005 19:20:11
    >  2. 29/11/2005 22:10:09
    >  3. 30/11/2005 20:56:09
    >  4. 28/11/2005 23:10:09
    >
    > by using the above SORT statement i am getting the
    > fourth record as the latest, where as it should give
    > me the third record....
    >
    > Please advise,
    > Suresh.
    Hi Suresh,
    The reason why you are getting this result is because the system is interpreting the DESCENDING only for AEZEIT not for both. Change it to
    SORT I_VIAUFKST BY AEDAT DESCENDING AEZEIT DESCENDING

  • Ftp get file with original date and time on one server to another server

    Dear All,
    I have successfully file copied from ftp server1 to ftp server2 but i cant get original file date and time.If anyone knows please help me...
    i have using the package is sun.net.ftp.FtpClient .
    Thanks
    Andavar.P

    Use the Apache commons-net library which has an excellent and easy to use FTP API, properly documented too.

  • Create/update date and time for any object

    Hi All,
    How to find that at what date and time at which perticular object is created or updated.
    Thanks,
    Nitesh

    Example below:
    [email protected]> alter session set nls_date_format='dd-mm-yyyy hh24:mi:ss'
    2 /
    Session altered.
    [email protected]> select owner, object_name, last_ddl_time
    2 from dba_objects
    3 where owner = 'MOB' and object_name = 'T';
    no rows selected
    [email protected]> create table t(id int);
    Table created.
    [email protected]> select owner, object_name, last_ddl_time
    2 from dba_objects
    3 where owner = 'MOB' and object_name = 'T';
    OWNER OBJECT_NAME
    LAST_DDL_TIME
    MOB T
    30-08-2006 14:15:58
    [email protected]> column object_name format a30
    [email protected]> /
    OWNER OBJECT_NAME LAST_DDL_TIME
    MOB T 30-08-2006 14:15:58
    [email protected]> alter table t add x int;
    Table altered.
    [email protected]> select owner, object_name, last_ddl_time
    2 from dba_objects
    3 where owner = 'MOB' and object_name = 'T';
    OWNER OBJECT_NAME LAST_DDL_TIME
    MOB T 30-08-2006 14:16:25
    Best Regards
    Krystian Zieja / mob

  • Mail App not updating date and time

    Hey guys,
    Has anyone else has this problem: My Mail app isn't updating the date and time at the bottom of my screen. (In between, the refresh button on the left and the new draft button on the right) Not sure how to fix it...
    Thanks in advance!

    Click on View on the top menu, click on Columns, and then click on "Date Received" to select it. Once it is checked, the Date and Time will display.
    Cheers,
    GB

  • Updating Date and Time at Save

    I have inserted a 'Date and Time' field in the header of a Pages document. I would like it to update each time the document is saved. I cannot seem to find how to do this. Can anybody help please?
    Thanks
    Tim

    Hello
    I wrote upon Automator for those using 10.5 which gives the ability to record the user's actions in a process file which may be replaid later.
    With 10.4.x this feature doesn't exists.
    This is a very good reason to switch to 10.5
    You are lucky, insomniae strikes again so here is the announced brute force script.
    Copy the script in the clipboard
    Paste in a blank window of Script Editor
    Save it as an application
    Move the newly created application into the folder:
    <startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Pages:
    Now, enter your Pages document.
    Click in the header.
    Go to
    menu Scripts > saveWithCurrentDateInHeader
    The contents of the header will be replaced by the current date/time
    and the document will be saved exactly as if you pressed cmd + s
    Yvan KOENIG
    26 janvier 2008
    --(SCRIPT saveWithCurrentDateInHeader.app]
    property theApp : "Pages"
    tell application theApp
    activate
    tell application "System Events" to tell application process theApp
    keystroke "a" using {command down} (* print *)
    set cd to current date
    set the clipboard to (cd as text)
    keystroke "v" using {command down}
    keystroke "s" using {command down}
    end tell -- System Events …
    end tell --theApp
    -- [/SCRIPT]
    As you may read, there are more lines to explain the use of the beast than for the code itself
    As I am unable to activate the dialog allowing us to adjust the date whe it is inserted the official way, I simply paste the current date-time into the header.
    Just click tnto the header of the current page. It will be automatically reported into other pages's header.
    Yvan KOENIG (from FRANCE samedi 26 janvier 2008 4:48:47)

  • Cannot get pass the "Setting date and time" screen

    Hi, I am faced with a very serious problem... someone please help!
    I bought home an Apple TV (2nd generation) for my parent overseas, but when I switched on - it got stuck on "Setting date and time" screen and cannot continue. Pressing "menu" button (or hold on for many seconds) does not work at all! I am stuck in that screen. Restart the Apple TV does not helped.
    I thought it is the issue of the remote control (maybe "menu" key has failed), so I bought another one (the aluminum model) and the same issue persists! I tested the remote control on Mac (boot up and press menu key, using Better Touch Tool... both shows the menu key is working).
    What shall I do? Thanks!

    is it connected to the internet either wired or wirelessly

Maybe you are looking for