Why do I get items at top level in Import Manager?

Hello all:
When trying to import from XML file using XML Schema, from IDoc type /AFS/MATMAS04, I get items that should appear as a table, as fiels of structure E1MARAM instead of as a separated table.
I've already reviewed the XML Schema file XSD, and the maxOccurs parameter is properly set.
Can anyone please tell me a list of possible reasons for this to happen or provide any other helpful hints?
Thanks in advance!

hello bigfootjim159, please try to remove the complitly extension in firefox/tools > addons > extensions - it's adware. also have a look in the windows control panel and uninstall any toolbars or unwanted entries there.
[[Troubleshoot Firefox issues caused by malware]]

Similar Messages

  • Getting at a top-level XML attribute

    It's Friday afternoon... I'm fried and can't seem to figure
    out how to get at a top-level XML attribute.
    Some specifics...
    My XML doc has a single attribute in the top node followed by
    several "version" nodes
    <projData projectName="Spry Project">
    <version>
    I successfully load and create an xml data set from said XML
    file. Later on, I use the getDocument() method to refer to the XML
    DOM doc used by the original xml data set. I need to extract the
    value of the attribute "projectName" into a javascript variable.
    The xpath query should be "projData/@projectName" but all I
    get returned is an undefined value.
    Any ideas? I'm sure it's something simple that I'm
    overlooking.

    > can you please helo.
    This is impossible.
    Obviously your ABAP mapping is wrong. Fix it.

  • Why do I get This message when trying yo import my pictures?

    Why do I get This message when trying yo import my pictures?
    The operation couldn’t be completed. (com.apple.ImageCaptureCore error -9912.)
    Please help, Thanks

    What version of iPhoto are you using and from where (and how) are you trying to import the photos? 
    As a first fix attempt try this:  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and  see if you get the same message.  If you don't then the problem lies with your current library.
    OT

  • HT201408 My iPad version 6.1.3 will not import Nikon RAW (.NEF) files. Can anyone tell me why I just get red exclamation points and no imports? Discussion areas indicate that RAW files can be imported.

    I am unable to import RAW Nikon (.NEF) files into my iPad version 6.1.3. Can anyone explain to me how to import RAW files? I continually get a red exclamation point with RAW files while jpegs have no problem. Other discussions indicate that RAW files can be imported. Many thanks for yur help.

    D40X support should be available in ACR 4.1. Availability should be by the end of the week, according to dpreview. See
    http://www.dpreview.com/news/0705/07052901adobecameraraw41.asp
    John

  • Why am i getting this warning? iPhoto cannot import your photos because there is not enough free space on the volume containing your iPhoto library.

    I can no longer import photos from my PC because I get this message:  iPhoto cannot import your photos because there is not enough free space on the volume containing your iPhoto library.  How can I fix this problem?

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • How do I use CreateBookmarksFromGroupTree and NOT get a "temp_" for my top level?

    I have a report that I have created that uses uses groups and I wanted export a PDF using the CreateBookmarksFromGroupTree option. While that works, I get an ugly top level bookmark name that starts with "temp_" then followed by two GUIDs "temp_13fef8e3-30ec-4bc5-ba77-b55d23c95e8f {87823BCB-7789-407C-8A7F-5096BE07A83E}".
    So, how do I:
    1) Get rid of this top level so it matches the Crystal Viewer (which has multiple top level bookmarks)
    2) Put in a name of my own choosing as the top-level bookmark.
    <!break>
    Any help or suggestions would be appricated.
    Thanks,
    Jim

    I would very much like to know how to avoid this also!!!

  • Why do the LabVIEW examples that use the queue design have one loop in the top level and all the others as subvis?

    Specifically the Weather Monitor example under connectivity/Web Services and the FPGA design examples.
    There are several parallel loops. One of the parallel loops will be in the top level VI. The others are all in sub-VIs. After the third example I was looking at it seemed obvious this was being done as a standard, but I don't know why it matters.
    Why not all of them as SubVIs? Why not all of them as top level loops? (Well OK maybe not that one.)

    For me, it depends on what is happening in the parallel loops.  When I have modules that just need to run in parallel with the main loop, it helps reusability to have it a a subVI call.  I can then just copy that library to another project and use it.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • How do I use CreateBookmarksFromGroupTree and NOT guid in the name for my top level?

    Post Author: Barbdcg
    CA Forum: Deployment
    I have a report that I have created that uses uses groups and I wanted export a PDF using the CreateBookmarksFromGroupTree option. While that works, I get an ugly top level bookmark name that starts with the name of my report, then followed by a GUID;
    Report {49E72CC5-7FFD-44F8-831B-EA8F543F7D82}.rpt
    So, how do I Put in a name of my own choosing as the top-level bookmark or at least get rid of the guid?
    Any help or suggestions would be appricated.
    Thanks,
    Barb

    Post Author: Barbdcg
    CA Forum: Deployment
    Still no answer??? I can not figure this one out!!  HELP!!!

  • How to enable "top level navigation " in portal

    Hi all,
    I am unable to see the "top level Navigation" once I logged on to portal
    Previously I was able to see that
    I performed the following steps thats the reason why I am unable to see "top level navigation"
    1 Logged on to portal
    2 Content administration
    3 Expanded Poratl Content
    4 Expanded Content Provided by SAP
    5 Expanded End User Content
    6 Expanded Standard Poratl Users
    7 Selected "Default Frame work Page"
    8 In that selected Top Level navigation Iview and the iveiw properties I changed the property "Number of Display Levels " to "0" and choose save
    As I have set "Number of Display Levels" to "0" I am unable to see "top level Navigation" Now,I want to change it to 2 for that I need to see the Content Administration role in the "Top Level navigation" Can anyone help me out how to enable "Top level Navigation"
    Thanks in advance

    undo the changes what you have done.
    after you logon to the portal try the url below...this should take you to content admin directly from there modify the framework page and reset the property of TLN
    http://yourserver:port/irj/servlet/prt/portal/prtroot/com.sap.portal.pagebuilder.IviewModeProxy?iview_id=pcd%3Aportal_content%2Fadministrator%2Fsuper_admin%2Fsuper_admin_role%2Fcom.sap.portal.content_administration%2Fcom.sap.portal.content_admin_ws%2Fcom.sap.portal.portal_content&iview_mode=default
    Thanks
    GLM

  • Duplicating files on Top "Level" of HD in Yosemite stuck with PENDING and "X"

    Duplicating files on Top "Level" of HD in Yosemite stuck with PENDING and "X"-- which is incredible as it is happening on both my 2010 MBP-13" and my daughter's brand new MacBook Space gray:
    Go to the highest level on your hard drive --- where the SYSTEM and APPLICATIONS and USERS folders are located.  Now take any file or folder that is there (small or big) and click on it, the either choose "duplicate" or do cmd-d to make a duplicate of that file.  WHAT HAPPENS?
    For me-- the file duplicates but the icon has a progress bar image  along the

    I HOPE THIS HELPS people to see what I'm getting on the top level only:  Here are 2 images -- a before and after:  I have a very plain empty folder called "Test Folder 1 May 2015" in the first one (along with some other folders) and then in the second one you can see I duplicated that folder -- but it now has a progress bar and and "x" showing!  (Just the "duplicated" file - the one with copy in the name).  This is a screen shot (using "Totalfinder" if anyone is wondering).  Same with my daughter's new MacBook (and she has essentially nothing on it, is not using TotalFinder - but the same problem.  Hey, maybe it's not a problem, maybe it's a "feature" of Yosemite or just the way it treats root level folders now--- but I sure would like to get rid of this weirdness if possible without breaking the system!

  • Numbered folders appearing on top level of HD

    Past few days these folders keep reappearing. They are completely empty, I dump them, and then they show up again. I've been looking through the forums and haven't found any reference. Did the basic troubleshooting/permissions routines and ran Onyx. No dice they keep coming back. Any ideas on what they are or if they are signs of a problem?
    the folders look like this:
    9ffffff8200
    and contain folders like this:
    -05fffffff8ffffff-0000000000
    -05fffffff8ffffff-0000000004
    -05fffffff8ffffff-59e5700100
    -05fffffff8ffffff-0014043c0a
    -05fffffff8ffffff-028802cccc
    etc....

    I HOPE THIS HELPS people to see what I'm getting on the top level only:  Here are 2 images -- a before and after:  I have a very plain empty folder called "Test Folder 1 May 2015" in the first one (along with some other folders) and then in the second one you can see I duplicated that folder -- but it now has a progress bar and and "x" showing!  (Just the "duplicated" file - the one with copy in the name).  This is a screen shot (using "Totalfinder" if anyone is wondering).  Same with my daughter's new MacBook (and she has essentially nothing on it, is not using TotalFinder - but the same problem.  Hey, maybe it's not a problem, maybe it's a "feature" of Yosemite or just the way it treats root level folders now--- but I sure would like to get rid of this weirdness if possible without breaking the system!

  • Why do I get an error msg : file import failure?

    Why do I get this error message? File import failure? I am using video clip from Iphone 4S.

    Have you tried trashing your Final Cut Pro preferences? It is usually the first step when FCP begins to act in unexpected ways.
    Download Preference Manager (free) from Digital Rebellion
    http://www.digitalrebellion.com/prefman/
    and use it to trash your preferences - they will be set to default the next time you open FCP.
    If that does not remedy the problem, do you have any still images in your timeline that are not RGB, or are greater than 4000 pixels in the widest dimension?
    Is your source material in an FCP7 edit friendly codec?
    MtD

  • When importing photos on I-Movie why do I get a green screen on some pictures

    why do I get a green screen when I import some photos in I movie

    131 views. No replies. Why can't someone from Apple not just give an answer to this query?
    Waiting 6 weeks for a reply is just RUBBISH. 
    Silence speaks volumes.  Come on Apple get a grip!

  • In List View, how can I move an item from within a subfolder up to the top level of the window's parent folder?

    Up 'til now, from System 7.1 to Tiger—I skipped Leopard—you simply dragged the item onto the folder window's titlebar (since that folder's icon was, naturally, not in its own window) and BINGO! there it was, at the top level. Nothing I can think to do in Snow Leopard seems to work.

    Thanks. Most definitely does, although when experimenting I found the left window edge was closer, and 'scrubbing' the item just out of the window and back in seemed to fit the underlying file and folder metaphor better to my mind than just dropping it any old where in the window.
    And 'any old where', at any old speed doesn't always bring up the oh-so-subtle blue border that says, "I get it, you wanna add something to this window, hit me." That's The Clue. There seems to be an invisible line you hafta cross, and some kind of deliberate pace you hafta hit. Too fast and SL doesn't seem to always take it seriously. But that left edge scrub can be quite fast.
    Sorry about the over hasty denial, I was checking my facts and editting to say you were right when the board was shut for some sort of maintenance, and my bad became permanent. Please forgive.

  • How to have some top level menu items not be hyperlinks

    I have a navigation band where 5 of the 6 top level items need to NOT be hyperlinks but simply "category titles" that you mouseover to display the submenu - which are the links to web pages.
    An example of this is on the Amazon.com home page - the items under "Shop All Departments" has categories that are not clickable, but when you mouseover display the clickable submenu.
    Is it possible to customize some but not all of the top menu items and how?
    What do I need to modify in the CSS so that the top "category title" looks/behave the submenu (same font color/bgcolor changes) but no active hyperlink?

    Here is a link to my pagewhere I am testing the navigation. Currently there is only this one page and I have <a href="#"> for the links.
    The only menu item that should be clickable in the top level is "Contact"
    Everything in the second and third level (Events > Research >...) needs to be clickable
    Everything is working as I want except that "Research" needs to be clickable
    - and I would like to have the clickable item text be underline when in the hover state but I want to get the base navigation working first
    The closest matching code I found in the CSS is:
    #MenuBar1 li .MenuBarItemSubmenu,
    #MenuBar1 li ul li .MenuBarItemSubmenu {
        cursor: default;
    If I remove this, all the top level items become clickable. Let me know if there is other information you need. I super appreciate your help with this!

Maybe you are looking for