Why do I get "RUNDLL Error Loading" C:\documentsandsettings\owner\local\applicationdata\adobe\abbyy\

Upon starting up the computer I keep receiving the below error message:
“RUNDLL Error Loading”
C:\documentsandsettings\owner\local\applicationdata\adobe\abbyy\fewsacqr.dll
The specified mode could not be found”
I found the file and deleted it but still get the mesage.
Thanks

You also need to delete it from your Startup list.

Similar Messages

  • Why do i get an error 16 when i try to open adobe photoshop cs6 on my mac?? plz and thank you

    when i try to open adobe photoshop cs6 on my mac an error 16 pops up. can anynone tell me the solution??plz

    When it happened to me, it turned out that my permissions to the Application Support folder was unintentionally changed during an update, causing the problem.
    A Terminal command fixed it.  Copy and paste into Terminal. You need to be allowed to administer this computer from your account.
    If you are asked to enter a password, enter it blindly, because usually there are no dots and cursor movement when you do.
    sudo chmod -R 777 /Library/Application\ Support/Adobe

  • Why do I get an error message in safari 5.1 telling me to restart in 32 bit mode in order to "view the movie" when I first start safari on opening page?

    why do I get an error message when I start safari 5.1 telling me I need to open browser in 32 bit mode in order to "view movie" ? This occurs when I start safari on the opening page (the page with all the boxes for most viewed web sites). This had never occurred with safari up until the latest updates to safari & OSX [Version 5.1 (6534.50)] and OSX 10.6.8.
    also, I'm not trying to view a movie - this occurs for the page previews that load when safari opens.
    thanks.

    go here:
    http://get.adobe.com/shockwave/otherversions/
    choose "different version">full 64 bit and download - seems to have solved probem...let you know if it happens again

  • Why am I getting an error when I place two OAM files one after the other in different pages?

    Why am I getting an error when I place two OAM files one after the other in different pages? They do not load or play correctly.  They are both configured to play automatically with a .125 second delay and both have a white rectangle "poster" over for a hidden effect.

    Thanks for the idea, Scott! I initially tried your idea, but my OAM files were still not loading correctly.  I tried other combinations of OAM files, and it seems to work fine.
    Back to my original OAM files: I made sure that my elements in my Edge Animate project had different names. I originally copied parts of some elements from one to another, and I think it was confusing to DPS to read it. 

  • Why do I get the error message "iTunes Match could not download because disconnected from network?  I'm connected to the internet during that time with Safari so am I not connected to the network?

    Why do I get the error message "iTunes Match could not be updated because you were disconnected from the network during processing."  I'm on the internet during all of this.  What disconnect is the message referring to?  Itunes is frozen now.  I keep clicking OK but it just comes back with no action.

    Hello FredJay,
    Thank you for contacting Apple Support Communities.
    iTunes Match needs a network connection to work, either Wi-Fi, cellular or wired. See the following:
    Make sure you have an active Internet connection
    Be sure your computer or device has an active Internet connection by loading a webpage using Safari or another web browser.
    On an iOS device with cellular support, if you are not on a Wi-Fi network, try enabling 3G cellular data1 for iTunes Match.
    For iOS 6, tap Settings > iTunes & App Stores > Use Cellular Data > On
    For iOS 5.1.1 or earlier, tap Settings > iTunes & App Store > Use Cellular Data > On
    1Fees may be associated with downloading over cellular networks; contact your wireless carrier for details.
    From:
    iTunes Store: Troubleshooting iTunes Match
    http://support.apple.com/kb/TS4054
    Regards,
    Jeff D.

  • RUNDLL, error loading c:\documents the specified module could not be found

    Hi! I am new here and really need your help. We have a few Lenovo T400 notebooks. If I want to install Windows XP Prof with SP3 I always get this error dialog during GUI mode setup 9 Min. before finishing.
    RUNDLL, error loading c:\documents the specified module could not be found 
    We install this version of Windows on other notebooks without error. The logs show nothing special.
    Nothing really happens but it's looks bad for our customers. I think I am not alone because there are more
    entries in different forums with same problem without solution.
    Every help is appreciated. Thanks!

    Thanks for your reply! But the list of hotfixes on Microsoft Knowledge Base includes this hotfix?
    List of fixes that are included in Windows XP Service Pack 3
    888111  (http://support.microsoft.com/kb/888111/ ) Universal Audio Architecture (UAA) High Definition Audio class driver version 1.0a available for Windows XP, Windows Server 2003, and Windows 2000 Hotfix
    http://support.microsoft.com/kb/946480/en-us
    Sorry, we use Windows XP SP3 with this hotfix included. All of our other hardware which needs this hotfix too works fine with SP3.

  • RUNDLL  Error Loading c:WINDOWS\adobefagufagelew.dll

    When I boot up my computer I get this error box
    RUNDLL
    Error Loading
    c:\WINDOWS\adobefagufagelew.dll
    The specified module could not be found
    After this window appears then the system32 window opens
    Can anyone help?  I've already uninstalled and reinstalled Adobe 8 and done a Windows search for lost files with no success.

    Bill,  You have all been very helpful.  On a separate note, do you have any
    recommendations for removing all the porn from a computer.  I have a
    separate computer I got from a former collegue that I use to run a piece of
    equipment.  It has XP on it as well but I'd like to scrub the stuff from it
    so I don't get implicated if my Co take a look.
    Sincerely,
    Dan Haines
    Lab Director - S.E. Construction Lab
    P.T. Hutchins Co. LTD.
    40 Chamisa Rd. Suite E
    Covington, GA 30016
    [email protected]
    ph - (770)408-8557
    fx - (678)212-9043

  • Why am I getting an error message when trying to use a template?

    Why am I getting an error message when trying to use a Pages template?

    You are getting an error message because there is an error.
    Knowing wht version of Pages you are using, what template you are attempting to open, and what error message Pages is sending you might help determine why you are getting that specific rror message. Without those, the first sentence above i pretty much all that can be said with any assurance.
    Regards,
    Barry

  • Why do I get "generic error" message when trying to upload a self-created, 1hr .wmv file?

    I went through the forums and made sure that any blocks or copywrites weren't triggered by the file, it's clean and can be opened using a media player and other video editing software like windows MovieMaker. I keep getting "The importer reported a generic error" message and have no idea how to proceed. Can someone please help?

    Re: Why do I get "generic error" message when trying to upload a self-created, 1hr .wmv  file?
    This ARTICLE starts with a checklist on setting up a computer to run PrE best, then goes into a series of links for tuning up one's computer and OS, and then links on troubleshooting.
    There is also a link on posting all necessary info, to help others help you.
    Without knowing much more about your system, it is impossible to say much beyond that WMV's are tough assests to work with, requiring a lot of CPU horsepower.
    Good luck,
    Hunt

  • Why am i getting an error message that says "an unknown error has occured" when i try to update my apps in the app store

    Can someone please offer some suggestions why I am getting an error message that says "an unknown error has occured" when I try to download or update my apps in the app store?
    Thanks!
    disregard! i noticed someone else's post about signing out of the app store and signing in again and it worked.....

    Hi ...
    Try here > Mac App Store: "An unknown error occurred (100)" when purchasing
    If that doesn't help, drag the App Store icon straight up off your Dock so it goes, "poof".
    Now drag the App Store icon from your Applications folder to the Dock. Try updating your apps.

  • Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.

    Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.

    AMDS for Windows
    http://support.apple.com/kb/TS1567

  • I get missing plug-in error when opening my online bill which is in PDF format. I am using a 2010 Macbook with the latest version of Safari and Adobe suite installed in my computer. Why do I get this error? What should I do?

    I get missing plug-in error when opening my online bill which is in PDF format. I am using a 2010 Macbook with the latest version of Safari and Adobe suite installed in my computer. Why do I get this error? What should I do?

    In relation to my previous inquiry regarding inability to view a pdf file using Safari...
    Is it possible that I can view other online bills from other website but not this particular bill from one specific website?
    Sorry if I missed any important point in this article -->Apple Safari 5.1 and Adobe Reader/Acrobat Advisory
    Thanks again!

  • Why do I get this error message when I open Organizer in Photoshop Elements 11 "Elements Organizer has stopped working"? My only option is to Close Program so I am effectively locked out of my photo catalogue.  I have reinstalled the program to no avail.

    Why do I get this error message when I open Organizer in Photoshop Elements 11 "Elements Organizer has stopped working"? My only option is to Close Program so I am effectively locked out of my photo catalogue. I have tried reinstalling the program but it made no difference to the error message.
    Could someone help please?  Steph

    Hi,
    Please give a try to Photoshop Elements (PSE) knowledge base. steps mentioned on this and see if it works.
    Regards
    Kishan

  • Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

    Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

    I may have already resolved this issue buy removing the device from my computer and re-pairing it. It is currently working just fine.

  • More than maximum 5 filtered album lists trying to register. This will fail,Why i am getting this error when i pick video from Photo library.

    I am able to pick 4 videos from the Photo library in my iPhoneAPP but when i try to pick 5th one it throws an error:
    "More than maximum 5 filtered album lists trying to register. This will fail,Why i am getting this error when i pick video from Photo library."

    Hello Tate r Bulic
    I don't have any idea how to remove this error,can i pick more than 5 videos from the photo library...
    If it's then please help me and gimme idea..Thanks

Maybe you are looking for

  • How can i See NBA on my Apple tv in Germany?

    How can i See NBA on my Apple tv in Germany?

  • Video Podcasts not being saved.

    With a fresh install of Windows XP and iTunes, Video Podcasts were not be saved after download and processing.  Discovered that Quicktime must be installed separately for Video Podcasts to work correctly with iTunes. There was a "warning" with iTunes

  • Using Variable in ODI

    Hi, I need to use a ODI varible in procedure. That is, when i execute a procedure the data from a oracle table should be stored in the ODI variable. Later i need to use the same variable in another procedure. But now how can i use the ODI variable in

  • Printing size question

    I have three slides which when I print them out onto an 8 1/2" x 11" paper, each slide prints as a really small slide and not full page. Is there a simple fix for this? The slide setting is 1024 x 768 but I assumed that is for screen size only. Thank

  • Document Outline Not Converting As Expected

    I have a word document with two levels of headings. The Flashpaper options "Include Outline" is checked. The problem is, Flashpaper is only including the first level heading, not the second one. Also, when you click on one of the headings in the flas