Why do I get the following message when I try to print something off the internet:printer is off linr" when it is connected and I can print anything that comes like letters etc.
ever since I installed "Fire Fox" I have not been able to print anything off the internet, although I can print item that come such as letters etc.
I keep getting the message that my printer is off line when it is on. I am able to type and print o.k. but not able to print anything that I search on the internet.
Is this a silver AppleTV 1? If so coudl be these are 1080p trailers - it only supports up to 720p.
Similar Messages
-
I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video. I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video. Do you have any suggestions? I researched codec, but do not understand them at all.
gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR -
When trying to pay for an app, i get the following message: "your purchase could not be completed. For assistance contact itunes support at .." However i cant find tbe remedy at that address. Any ideas ?
You will need to do as the message says and contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
I have created an Apple ID and password but keep getting the following message when I try to buy something through the itunes store "Enter another Apple ID"
I had been buying things ealier with another Apple ID that I set up for my husband. The first time I ran into this I went ahead and set up another account for my self but am still getting the same message. What do I need to do?you need to review the account and verify it, including payment method. If there's no option that states 'none' next to the creditcard options, you'll need to use a creditcard for this.
-
I get the following message whenever I try to open FireFox
"microsoft (C) Register Server has stopped working"
Hi there.
Out of nothing I get the following message whenever I try to open FireFox :
"'''microsoft (C) Register Server has stopped working'''"
Internet Explorer won't open either, but it doesn't give a pop-up or anything, it just pretends I didn't open it.
The only way I can open a browser now is by running it as 'administrator'
I've taken the following steps, none of which have had any effect
- tried the DEP on trick in windows system
- Fully updated win 7
- Re-installed Firefox
- reboot, reboot, reboot
- searched online for solutions
but..... :(ooh my G#D !!! Norton is Best ! thank all you guys ! ;) im install norton anti virus and my fire fox is workin after scan!!! :))) huuuuurrrrrrraaaaaaaaaaaaaaa
-
I am trying to purchase mountain lion but I get the following message:
"We could not complete your purchase. The product distribution file could not be verified. It may bedamaged or was not signed." Any help?Installing the appropriate combo update may help...
If you are running v10..7 Lion, install the OS X Lion Update 10.7.4 (Client Combo)
For 10.6 Snow Leopard > Mac OS X 10.6.8 Update Combo
Then restart your Mac. Try the App Store.
If that doesn't help, try the following..
Quit the App Store if it's open.
Open the Finder. From the Finder menu bar top of your screen click Go > Go to Folder
Type this exactly as you see it here:
/Library/Preferences/SystemConfiguration
Click Go
Move the NetworkInterfaces.plist file from the SystemConfiguration folder to the Trash.
Relaunch the App Store and try downloading Mountain Lion.
You may also need to disable anti virus software and turn off the Firewall in System Preferences > Security (or Security & Privacy) > Firewall -
Hello,
When I connect my iPhone 4S to my MacBook Pro (through the USB port), the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started".
What does that mean?
Thanks in advance for fixing my problem.I think I remember hearing that if you quit iTunes with your device still connected, then open iTunes up again, it should work.
EDIT: Here, this might help: http://support.apple.com/kb/ts1567 -
I tried to sync my iphone4 to my pc (not mac) and the following message went out: I tunescould not back up the iphone because an error occurred I restore my phone but nothing happened. What shall I do? (my ipad is working perfectly when i sync it)
I dont know why this happens.Unfortunately, "because and error occured" doesn't give you much to go on. Some general things I would try if you haven't already:
Use Disk Utility on your mac to repair disk permissions, then reboot and try backing up again.
Use Finder to go to ~/Library/Application Support/MobileSync/, then control-click on the Backup folder and select Get Info, then check Sharing & Permissions at the bottom and make sure your username has read & write priviledges
Try closing all apps, then reset your phone: double-tap the home button, tap and hold the apps at the bottom until they wiggle, tap the minus sign on all apps to close them. Then reset your phone: hold the on/off and home buttons until you see the Apple logo (ignore the off slider that appears first), and release
Try a different usb to dock connector cable; ensure that your case isn't interfering with a good connection to the dock connector at the bottom of your phone; clean the dock connector at the bottom of your phone (e.g., with a dry toothbrush); troubleshoot your usb connection (http://support.apple.com/kb/TS1286)
I know this looks like a laundry list, but unfortunately it's hard to isolate the problem without a clear error message. If the problem persists, you might try posting in the iMac or iTunes forums for other ideas. -
I have downloaded icloud to my pc, however when i go to sign in to Apple through icloud, i get an error message saying my apple ID is valid but is not an icloud account. What does this mean and how can i update my account so i can access icloud?!
To use iCloud, you must first set it up with your Apple ID on a device with iOS 5 or a Mac with OS X Lion.
-
i can't send an e-mail from thunderbird, it was working well though , suddenly it says the following message:An error occurred while sending mail. The mail server responded An error occurred while sending mail. The mail server responded: (Alis-MacBook-Air.local) [46.138.187.135]:51054 is currently not permitted
OR
i have changed the port from 587 to 465 but still cannot send e-mail, it keep sending and sending for 5 minutes and respond is time out?Can you post your Troubleshooting Information?
Help (Alt-H) - Troubleshooting Information -
why do i get this this message whenever i try to purchase or update i get a message saying contact itunes support
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
When i try to download ios 5.1.1 on itunes it says to check my connection and try again.
When i try to download ios 5.1.1 on itunes it says to check my connection and try again. How can i fix this ??!?!?!
Usually temporarily disabling any AntiVirus/Security software on your system resolves this issue. See here for other possible solutions.
iTunes: Advanced iTunes Store troubleshooting
B-rock -
What does it mean when I keep getting the following message on my IPad2:
Usually it's because you are not making internet connection via wifi.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
Why do I get the following message whenever I try to launch Premiere Elements 11??
Hi, hoping someone can help me out here. I am new to Adobe Premiere Elements 11 and whenever I try to launch it, I get the following message:
Before this message appears, while Premiere is loading it allways gets hung-up while trying to load the SmartSound Adobe Plugin:
I tried loading it from the Organizer and get the same result. I uninstalled and reloaded with no luck. I meet the system requirements for Mac and am at a total loss. ANY help would be GREATLY appreciated!!
MikeSteve,
I tried the suggestions contained in the link (even validating the fonts...), and still no luck. It get hung up on the following screen EVERY time:
Must be something with the SmartSound plugin I assume... Thanks in advance for your help!
Mike -
I'm the Adnin. just recently I tried to update system software (Lion OS). The following message was returned. None of the selected updates could be saved. A network error has occurred. Check your Internet connection, and then try again. but I have internet access )email, Safari, etc.). Any idea of what is happenening?
The error may be at Apple's end rather than yours. It could also be due to corrupted files on your computer. Try deleting the following:
/Home/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Caches/com.apple.SoftwareUpdate/
/Library/Preferences/com.apple.SoftwareUpdate.plist
Restart your computer.
Maybe you are looking for
-
Error message when trying to view/print Crystal reports in B1
I get the following Error message when trying to view/print crystal reports in SAP B1/Crystal Reports Integration Tool for SAP Business One: " Could not load file or assembly 'Crystal Decisions Windows Forms, version=12.0.2000.0, Culture=neutral,
-
my iphone 3gs stopped working and i tried to restore it on itunes but it said a file was corrupt any suggestions?
-
Many pages not displayed correctly in non-IE browsers
Some pages, especially those part of the PDK, are not displayed in non-IE browsers. An example is: http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/plsql/doc/sdk22pkg.htm Viewing the source shows a very badly formatted IMG SRC tag (al
-
How I could generate an XML file from a report in version 4.0B
Good morning, How could I generate an XML file from a report? Please note that I am using version 4.0B I don't have access to Billy Vital
-
Failed to get Column's data type in Oracle 11g
Hi, I made an ADO connection(Oracle provider) to Oracle 11g, and use ADO API: OpenSchema(adSchemaColumns) to fetch the columns' info. But I found I couldn't get the column's data type if it's type is timestamp or timestampwithtimezone in database. Wh