Why do I get the message "Insufficient Permissions" when trying to download updated iTunes software

Why do I get "Insufficient Permissions" message?

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Similar Messages

  • Why do i get the message server error when trying to restore my icloud backup i dont know if my backup was completed

    hi can anyone tell me why the message server error shows
    i did a icloud backup and have not been able to see if it was completed
    i now have a replacement iphone and want to know how i get the files back
    please help

    Hi there n@nnydee!
    I have an article for you that will give you some steps to go through in order to troubleshoot this issue with restoring from your iCloud back ups. The article can be found right here:
    iCloud: Troubleshooting restore issues with iCloud Backup
    http://support.apple.com/kb/ts4036
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Why do I keep getting the message "invalid image" when trying to download an item?

    Most of the time I am unable to download a document or an attachment from an email.

    There has been an outage for both iMessage and FaceTime today.  Started at around Noon time, PDT.
    There is nothing you can do from your end, this problem is on Apple's servers.
    Click below for Apple's System Status:
    http://www.apple.com/support/systemstatus/

  • Why do I get a message 'connection failed' when trying to download an app?

    Connection failed. when trying to download an app

    I downloaded Maverick. I have no idea I need an APP.

  • Why am I getting an app store error when trying to download Lion?

    Why am I getting an app store error when trying to download Lion? Any ideas?

    I would complain really bad and get them to give you a Flash card that they just came out with because they've inconvenienced you so much and  you don't have hours to spend at the apple store waiting for the whole thing to load.
    The only thing about the flash cards is that it will change your whole motherboard so it won't allow you to install snow leopard or anything less, ever again. (as what the apple specialist told me over the phone).
    I would also suggest waiting. It really isn't worth the hastle and you may not benefit from installing it on your old computer... just a thought.

  • I am getting an error when trying to download new iTunes software to new Windows 7 computer.

    I am getting an error when trying to download iTunes to a new Lenovo laptop with Windows 7.  Says... An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="win32",version="8.0.50727.6195",publicKeyToken="1fc8b 3b9a1e18e3b",processorArchitecture="86".  HRESULT:0x80070BC9
    Please help if anyone knows how to fix or bypass this problem.

    These ones are tricky. But the following instructions are worth a try.
    First do a complete uninstall of iTunes and related components (but don't reinstall just yet), as per the following document:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    a. Launch regedit (Start >> Search Programs and Files >> type Regedit and open the regedit that comes up.)
    b. Access the following Location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData \S-1-5-18\Components
    c. Perform the following actions
    i. Right Click on Components Folder
    ii. Select Permissions
    iii. Select Full Control and Read Permissions options
    iv. Select Advanced Button
    v. Select Owner Tab
    vi. Select to Change Owner to the Administrators
    vii. Check the option “Replace owner on subcontainers and objects”
    viii. Select OK when prompted that it may not change all.
    ix. Select Apply
    x. Select Apply again
    xi. Exit the Registry Editor
    Now try reinstalling iTunes again. Does it go in properly this time?

  • Why do I get the message "an error has occured while downloading the updates (102)" and what do I do now?

    What can I do to get around the problem regarding the downloading of the upgrade to iTunes?  I get a message "an error has occured........."

    Try installing the standalone version from Apple's website. What happens?
    Apple - Support - iTunes - Install & Update

  • Why do I get the 'PowerPC code' error when trying to launch an Intel-based app from a CD?

    When trying to launch a Flash-based app from a CD on my Mac Book Pro, I get the "PowerPC apps are no longer supported" error. Yet the app is not built with PowerPC code.
    This also happened with Microsoft Office programs soon after I upgraded to OSX Lion, but someone was able to solve that for me.

    It's just a free disc from a photo magazine, but the app runs fine on a Mac Pro running 10.7.3. Could it be hardware related?
    I have actually asked this on behalf of a reader (I work for the company that makes the magazine) who is experiencing this problem, I just can't find any reason why the error would display in these circumstances. I apologise if this is against the community's usual practise - I just want to sort this guy out!
    The app on the disc is compiled using MDM Zinc, but like I said it runs a-OK on Lion everywhere else.
    Any help would be gratefully received and appreciated!

  • HT201272 Why do I get the error code 5105 when trying to redownload a tv episode?

    I have lost a tv episode that I had already downloaded to iTunes. I went to download it again and I got the error code 5105. what does this mean and what an I do to get the episode back? I have done everything that the support website said to do but nothing works. I am starting to really think that Apple is going rotten and I need to switch to Samsung. I am running a windows computer with Windows 7.

    restart pc, "RunAs Administrator" iTunes

  • Getting error message "Invalid COD" when trying to download bible software..​..

    Anyone know why I can't download youverse bible software to my bb curve 8330, getting the "Invalid COD" message?

    I had no idea where you were downloading it from, I just went off what you called it, youverse.
    Keep trying later, perhaps they are having server issues.
    YouVersion is a great application, had it loaded for a while and use it often.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I am  getting the message E_adept_xml syntax when trying to activate my Nook

    i have previously activated a nook on adobe digital editions but due to my stupidity I broke it, I now have a replacement but i can get it to activate help!

    ps  it wasnt about the above issue it was about just the 1 i stated. your guess isnt educated at all tho re it, u should research it b4 u try to answer.  theres no reason 1 3g works fine to post to fb but another wont

  • Why do I get "missing plug-in"notice when trying to download a document requiring acrobat reader?

    I cannot download a prospectus that requires acrobat reader.  There is a message on the site that states I am "missing plug-in".  I have contacted the issuer of the prospectus and they say the path is correct.  I have even downloaded the acrobat reader software that they suggested.  I uninstalled this because it didn't work either.  What would the missing plug-in be and where can I get it?  Thank you for any help.

    I really appreciate the help.  I always have had my Preview  selected as the default.  I went through all the steps again just to make sure I hadn't inadvertently changed something.  I still cannot open this link.  You and WZZZ have made me realize I may not have explained my problem well enough.
    I actually don't have an attached PDF in my email.  What they sent me was a link to a website that was to open my prospectus within the browser.  The senders of the email also stated that I would need the Adobe Reader to open it.  I downloaded their version of Adobe Reader, but that didn't work either, so I uninstalled it.  I deleted the Adobe Reader Plug-in from HDD - Library - Internet Plug-ins.  That didn't work either.  I have updated the Adobe Acrobat Pro 9 (I'm not even sure this is connected to Adobe Reader but it seems to be since the AdobePDFViewer.plugin was reinserted).  None of these things has worked for opening this file. 
    I am willing to download another browser. Would you recommend Opera or Firefox?

  • Why do I get an error code 5002 when trying to redeem an iTunes gift card?

    I have an iTunes gift card and everytime I enter the redemption code I get an error code 5002.  Sure would like to be able to redeem my card.

    This alert is often the result of an issue with verifying your billing.
    Quit iTunes.
    Open iTunes.
    Test the issue.
    If it persists, sign in to store.apple.com using your iTunes account
    Click on Change account information
    Modify or remove your credit card information.
    Click Continue.
    Test the issue.

  • I hve an error message R6034 when trying to download latest iTunes software?

    When I try to download the latest version of iTunes, I get an error message R6034...please help?

    What is your operating system & version?
    Was there any other information beside that 13050 error?

  • When trying to download from iTunes, I keep getting the "error 8003" message, while trying to download. What does it mean? What should I do? Help!

    I keep getting the message "error 8003", while trying to download a pre-purshased TV show from iTunes. What does it mean? What should I do?
    Help!

    Have you tried exiting iTunes and restarting? The times I've seen this error this has worked. After restarting iTunes the program asks me to sign into my account and then the downloads begin.

Maybe you are looking for