Why do I get the message "no SIM card installed"?????

Why do I get the message "no SIM card installed"?????

That will generally mean that your sim card is damaged and/or corrupted, or it may mean it is inserted improperly, may need to take it out and reenter, or maybe its gone for some reason, lol
Probably the first one. Hit up a Verizon corporate store and have them give you a free fresh one.

Similar Messages

  • I keep getting the message :No SIM card installed   Insert a valid SIM with no PIN lock to activate iPhone - there is a sim in the tray in the phone...how do I fix this?

    I have recently upgraded from the iPhone 3g to an iPhone 4, and I was going to give my 3g to a friend, but it comes up with the message as above, whenever the phone is turned on...
    There is a sim card installed...
    My carrier (virgin) say that they have unlocked the phone from optus.
    How do I fix this?
    thanks
    Anushka

    Virgin use the Optus network here in Australia - which is why, the 3G phones showed you connected to the Optus network, and not to the Virgin network...They don't have their own network, they piggyback on Optus - which is why it would show that it is locked to Optus!
    They also said they would unlock my iPhone 4 - which has been done!  So there's obviously something wrong with the phone...

  • Hi.. I keep getting error message " No sim card installed " .. Can somebody help me out in this issue ? please

    This message keeps coming almost now regularly too often .. Please somebody help me how to solve this .. I have tried removing the sim card but it is of no use ..

    Hello henry lfrommiami,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where your iPhone gives you the message "No SIM Card installed" please follow the steps below.
    Update your iPhone to the latest version of iOS.
    Turn airplane mode on and then off again.
    Restart your iPhone.
    Check for a carrier settings update. Go to Settings > General > About. Install any available update.
    Remove the SIM card and make sure that it's a valid SIM that your carrier provided. Also make sure that it's not damaged, worn, or modified. Then reinsert it.
    A SIM tray that comes with one iPhone model won't necessarily work with a different iPhone model. When you insert the correct SIM tray, the SIM tray should be flush with the device.
    If you have another SIM card, insert it. You can use a SIM card from any phone with the same format as your iPhone SIM card. If your iPhone works with that SIM card, contact the carrier that issued your original SIM card.
    Restore the iPhone.
    If you still see the issue, contact Apple support.
    If you see 'No SIM' alert on iPhone
    Cheers,
    Alex H.

  • Why am I getting the message "project could not be prepared because an error occurred. (File already open with write permission)" when trying to share my imovie to media browser?

    Why am I getting the message "Project could not be prepared because an error occurred. (File already open with write permission.) when trying to
    share to the media browser?   I have done this many times before and never got this message.  This is very frustrating.  Can anyone help me?

    Hi
    Error -49 opWrErr  File already open with write permission
    Trash the preference files while application is NOT Running.
    Easiest way to find out if this is the problem is by:
    • Create a new User-Account
    • Log out of Your old one and into this
    • Re-try iMovie
    If it now works OK - then 99.9% the problem is iMovie pref. file that needs to be trashed.
    from Karsten Schlüter
    Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
    This issue occurs only on MacOs machines using 10.7x
    try switching-off the Local Mobile Backup
    in Terminal copy/paste
    sudo tmutil disablelocal
    Re-launch Mac
    Yours Bengt W

  • Why do I get the message that my operating system is not supported?

    My computer is running Windows 7 - 64-bit. I have the latest softwear on both my iPhone and my iPad. I have installed Edge Inspect on these devices and have the Google Chrome edge inspect extension installed. I have been able to enter my passcodes for both devices in the Chrome extension. Why do I get the message that my operating system is not supported just yet?

    This is VERY interesting ... even though I got that strange message, once I linked my iPhone and my iPad to the Google extension, it worked! Whatever I display in Google Chrome automatically displays in the Edge Inspect app on the small devices. This is neat! The only problem that I can see is that Adobe needs to replace the error message with information about how to use the application.

  • Hi why do i getting the message like "Your payment method was declined"

    hi why do i get the message like "Your payment method was declined"

    What are you trying to use as your payment method, credit card, debit card ... ? If it's a debit card then I don't think that they are still accepted as a valid payment method in all countries - from this page :
    You may be able to use other payment types in your country, like debit and Maestro cards.
    which implies that they are not accepted in all countries, and there have been a number of posts about them being declined.
    For a card to have a chance of being accepted it needs to be registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, and have been issued by a bank in the country where you and your iTunes account are. If it is then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes Support (these are user-to-user forums) and see if they know why it's being declined (but you might not be able to use a debit card) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management

  • TS4425 Why do I get the message "there's no photos in this album"

    Why do I get the message "there's no photos in this album"?

    hi
    i was wondering if you found a solution to this issue because im getting the same message
    thanks

  • TA48312 Why am I getting the message that I have timed out every time I go to check my purchase history in ITunes

    Why am I getting the message that I have timed out every time I go to check my purchase history in ITunes

    Reset IE to defaults.
    Tools > Internet Options > Advanced > Reset

  • HT201328 why do I get the message to enter passcode? what is this?

    Why am I getting the message to enter passcode when I first turn on my phone? What is a passcode? Never had to do this before.

    If you created a passcode during the setup after updating to iOS 7, that could be why you are seeing the passcode request. Do you recall creating a passcode after updating to iOS 7?

  • If I tunes indicates that I have 4.29GB free on my 4S, then why do i get the message that it cannot complete the sync because of inadequate available space?

    If I tunes indicates that I have 4.29GB free on my 4S, then why do i get the message that it cannot complete the sync because of inadequate available space?

    Not the case.  There is a sync issue.  I tried to un-sync all your music to remove it from the device, then restart (hold down the home button along with the sleep/wake button until you see the apple, then let go). as suggested in another thread, but cannot remove the music from my phone (in an attempt to free up space as you intimated.)

  • Why do i get the message that says i have used the maximum number of free accounts on my iphone 4  and how do l fix this

    Why do I get the message that the number of free accounts  has been activated my iphone  and how do I inactivated them ?

    See the "more like this" section on the right side of this page, as your question has already been asked and answered many times.

  • My iPhone occasionally starts with the message no sim card, how do I get it recognize the sim?

    My iPhone occasionally starts with the message no sim card, how do I get it recognize the sim?

    My iPhone occasionally starts with the message no sim card, how do I get it recognize the sim?

  • TS3354 I have an Nvidia GTX 580 and a Dell U2711, which has HDCP support.  Why do I get the message in itunes that my hardware does not support it?

    I have an Nvidia GTX 580 and a Dell U2711, which has HDCP support.  Why do I get the message in itunes that my hardware does not support it?
    I downloaded 1080p content, not sure why this would not work with the hardware I have.
    Bryan

    Updated first post with dmesg output. I added all of it, but here's a quick snippet of the tail (which is right after booting up and attempting to autostart SLiM)
    [ 13.426857] NVRM: API mismatch: the client has the version 310.19, but
    NVRM: this kernel module has the version 304.60. Please
    NVRM: make sure that this kernel module and all NVIDIA driver
    NVRM: components have the same version.
    Why is the kernel getting 304.60 ? That's got to be the issue, but I don't why the kernel is getting 304.60 ...
    Output of pacman -Qs nvidia:
    local/conky-nvidia 1.9.0-2
    An advanced, highly configurable system monitor for X based on torsmo
    local/lib32-nvidia-utils 310.19-1
    NVIDIA drivers utilities and libraries. (32-bit)
    local/libvdpau-git-flashpatch 20120825-1
    Nvidia VDPAU library from git with patch to fix flash blue tint and bleed through
    local/libxnvctrl 304.51-1
    NVIDIA X Ctrl library
    local/nvidia 310.19-2
    NVIDIA drivers for linux.
    local/nvidia-utils 310.19-1
    NVIDIA drivers utilities and libraries.

  • Why i always get the message "Oops! Something just went wrong on our server! We've logged the prbl"

    why i always get the message "Oops! Something just went wrong on our server! We've logged the problem and will fix it as soon as possible. Sorry for the inconvenience." everytime i added new apps on eprintcenter.

    I will need a little more information in order to help out. What model of printer is it that you own? Are you able to ePrint with the machine when you send emails to it? Have you every been able to successfully download apps to the machine without getting the error message? Do the apps that you download successfully download at any time after that error and later work?
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • Why do I get the message "error connecting to acrobat"?

    Why am I getting the message "error connecting to the acrobat..." when I try to open a pdf file from the internet? I have the adobe reader installed on my tablet. This is something that just started happening. I did not have this problem before. I hope that someone can help.

    Hi,
    Thanks for writing to us. Are you able to view the file after this message? Is this message coming every time when you are trying to open a file from internet? If possible please share the file or link from where you are trying to open this file with us on  [email protected]  so that we can resolve the issue you are facing.
    Thanks,
    Shefali

Maybe you are looking for

  • How do I change the apple ID associated with my dev account to a different, already existing apple ID/account

    Hi, I currently have an iPhone Dev account, which is associated with a certain apple account.  I also have a different apple account, that I have already created.  I wish to change the dev account to use this other account.  I know you can change you

  • Po requisition workflow at distribution level

    Hi All, I am having issue with customization standard po requistion workflow. In this i have to get the approvals to be done at distribution level w.r.t project ,task,award.There are list of approvers described within a approval matrix to whom the ap

  • Parallel approval  nest sequent approval for SC

    Dear All      I am using SRM7.02. I can realize parallel approval for SC  as following.      only after A1 and B1 approved. the process will end or enter next level.    But , the customer gave me a new challege,  as the following. The work item is se

  • 2 Trees on the same Page

    Hi! I'm using Apex Version: 4.2.1.00.08 I created a page with 2 tree regions. Both trees use different items and different queries. The first tree is displayed correctly. But the second one just contains the first item, if I don't display the first o

  • How to eject disk image without needing it to run a program

    When ever i install a program from the internet such as Skype an image appears on my desktop...when i eject it and open Skype it says i cannot use it because i need it.how do i get rid of the image and still be able to use the program? Thanks-