Why do I get the message "there was a problem backing up to iCloud, try again later"??

I keep getting a "Try again later" message when I try to back up with iCloud. Can someone tell me why??

exactly the same problem, and so far no solution, this after two weeks of senior advisors at Apple messing with my icloud account...

Similar Messages

  • I get the message "There was an error saving your prefs, please try again." When adding to my Stock Watch

    I get the error message:
    "There was an error saving your prefs, please try again."
    When I add a stock symbol to my Stock Watch. The entry is temporarily added to my list and the message issued. However, on refresh the update has NOT been recorded. This is happening since I updated to Firefox 4.0.1

    Delete all content from following location on your machine and try updating again.
    Win 7 and higher: <os-drive>:\Users\AppData\Local\Adobe\AAMUpdater\1.0\
    Mac OS (User Library): ~/Library/Application Support/Adobe/AAMUpdater/1.0/
    Please refer:
    Access hidden user library files | Mac OS 10.7 and later
    Let me know if it works for you.
    Regards,
    Ashutosh

  • I've just downloaded facetime and every tie I attempt to open it I get the message"there was a problem with facetime you need to quit and reopen facetime" I've tried this but  I just get the same message again and again

    i've just downloaded facetime and every tie I attempt to open it I get the message"there was a problem with facetime you need to quit and reopen facetime" I've tried this but  I just get the same message again and again

    Hello tadom,
    Thanks for the question. The following article outlines the exact error message you described, and a potential resolution:
    OS X: "An internal FaceTime error occurred" alert after clicking Facetime icon in the Dock
    http://support.apple.com/kb/TS4457
    Thanks,
    Matt M

  • Is it possible to run BBC iPlayer from an iPhone4 through AirPlay to Apple TV2 please? I keep getting the message "An error occured loading this content. Please try again later"

    Is it possible to run BBC iPlayer from an iPhone4 through AirPlay to Apple TV2 please? I keep getting the message "An error occured loading this content. Please try again later"

    First, try a system reset on the iPod.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If that doesn't work, reset the Apple TV.  I'm not at mine right now and I'm talking from memory but the reset is somewhere in the Settings menu.

  • Why do I get error message "There was a problem uploading a presentation"

    I've tried to upload a Keynote presentation to iCloud by dragging it from my Mac and dropping it into Keynote on iCloud. It begins to upload but within 10 seconds I get an error message:
    There was a problem uploading a presentation
    Try again later
    I've tried half a dozen times.

    exactly the same problem, and so far no solution, this after two weeks of senior advisors at Apple messing with my icloud account...

  • When I try to save a PDF, I get the message "There was a problem reading this document (14)."

    When I try to save a PDF, I get the message "The document could not be saved. There was a problem reading this document (14)."
    I receive no other information that helps me debug what the problem is.  The PDF is filled with editing comments.

    MobileMe was terminated on that date and you cannot access your iDisk using the Finder. You should sign out in System Preferences>MobileMe to prevent error messages - it's best to turn of any iDisk or other syncing first.
    There is currently a 'limited' grace period during which you can download files from your iDisk and Gallery, and migrate to iCloud if you haven't already done so. Go to http://me.com and follow the links there. We do not know how long this facility will continue to be available.

  • When I control-click a hyperlink in a text document, I get the message "there was a problem sending the command to the program"

    In the last few days I've found that control-clicking a hyperlink in a document, or clicking a link in Thunderbird, does not bring up Firefox. This started I believe after I updated to Firefox 5.0. I'm running Windows 7 64-bit and Firefox has always performed perfectly until now.
    I had also updated Thunderbird which caused my ThunderBrowse extension to be disabled (not compatible) so I had assumed that was the problem in Thunderbird. But since it happens in a text document too, I'm no longer sure.

    Try here >  Mac App Store: "An unknown error occurred (100)" when purchasing

  • Since I downloaded Firefox 4 I now get the message: "There was a problem sending the command to the program." But it goes ahead and does it anyway. Is there anyway to get rid of this annoying message?

    see above

    My problem was resolved when I disabled the FoxyProxy add-on that I had installed. Someone mentioned this in another forum and it worked for me.

  • I own Photoshop CS5 and i get messages that there are updates available, but when I go to download and install them i  get the message "There was an error downloading this update. Please quit and try again later. "  What can I do to resolve this?

    I own Photoshop CS4 and get messages that updates are  available, but when I go to install them I get the following message,
    "There was an error downloading this update, please try again later." I have tried numerous times with no success.  What am I **** wrong?

    Delete all content from following location on your machine and try updating again.
    Win 7 and higher: <os-drive>:\Users\AppData\Local\Adobe\AAMUpdater\1.0\
    Mac OS (User Library): ~/Library/Application Support/Adobe/AAMUpdater/1.0/
    Please refer:
    Access hidden user library files | Mac OS 10.7 and later
    Let me know if it works for you.
    Regards,
    Ashutosh

  • Western Digital My Book World EditionI have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way i get the message 'There was a proble

    I have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way I get the message 'There was a problem connecting to the server "MybookWorld.local" The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem'
    It is a brand new iMac and running Lion OSX
    Any ideas on how to solve would be gratefully received?

    Followed the directions on this page and it worked!
    http://forums.macrumors.com/showthread.php?t=1102423
    Part One - Turn on SSH (in the admin panel)
    [1] Go to to http://mybookworld.local
    [2] login: username will be admin, password will be whatever you have setup. If you can't remember it should be in your Mac OS X keychain (Utilities > Keychain Access, search for "mybookworld"). If you have not changed if from the default the password will be admin as well.
    [3] Switch to advanced mode.
    [4] From the System tab, pick Advanced.
    [5] Enable SSH Access, and click submit.
    [6] Click on the network tab and then the LAN button
    [7] Make a note of the IP address
    Small, maybe obvious, but nevertheless important point: For the install to work, your NAS needs to be connected to a router with internet access.
    Part Two - Install netatalk2.2
    [8] Open Terminal.app (Utilities > Terminal)
    [9] Enter the following command (substitute in 127.0.0.1 for the actual IP address you noted down in step 7), then hit return:
    Code: 
    ssh [email protected]
    [10] When prompted, enter the ssh password (will be welc0me).
    [11] You are now going to download the installer. Enter the following command, then hit return:
    Code: 
    wget http://mybookworld.wikidot.com/local--files/netatalk2-2-on-whitelight/install_netatalk.sh -O install_netatalk.sh
    [12] Once completed, you will need to run the installer. Type:
    Code: 
    sh install_netatalk.sh
    [13] You will be asked a number of question during install, answer yes to all. When asked about the "DHX2 login process", I opted to install the modified version, so I can confirm it works.
    [14] Once the box has restarted, you should be able to connect to your afp shares and continue to use Time Machine.

  • TS4425 Why do I get the message "there's no photos in this album"

    Why do I get the message "there's no photos in this album"?

    hi
    i was wondering if you found a solution to this issue because im getting the same message
    thanks

  • When I attempt to open a PDF file I saved from a website, I get the message "There was an error opening this document. The file is damaged and could not be repaired." Is there any way to correct this problem?

    When I attempt to open a PDF file I saved from a website using Safari, I get the message "There was an error opening this document. The file is damaged and could not be repaired." When I save the same PDF file using FireFox it opens up immediately. Is there any way to correct this problem with Safari?

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • I get the message 'There was an error in the App Store. Please try again later. (100)', every time when try to buy a software, i changed my billing info but it didn't work, what can i do?

    I get the message 'There was an error in the App Store. Please try again later. (100)', every time when try to buy a software, i changed my billing info but it didn't work, what can i do?

    Try here >  Mac App Store: "An unknown error occurred (100)" when purchasing

  • Trying to open Aperture, but I get the message, "There was an error opening the database for the library "/Users/davewasson/Pictures/Aperture Library.aplibrary". - and it forces me to quit. What do I do?

    Trying to open Aperture, but I get the message, "There was an error opening the database for the library “/Users/davewasson/Pictures/Aperture Library.aplibrary”. - and it forces me to quit. What do I do?

    Dave-
    You can try opening the old (problem) library by launching Aperture into Library First Aid mode and choosing to Repair (first option) or Rebuild the library. Before doing this, make a backup copy of the old library, since both Repair or Rebuild will write changes to the library database.
    Repair is the faster and less drastic option, so try that first: After backing up your library, hold down both the Option and Command keys while dragging and dropping the problem library on the Aperture icon. The Photo Library First Aid window appears. Select Repair Database, then click Repair. After some time Aperture should open the library, if possible.
    If that fails launch Aperture back into Library First Aid and select Rebuild Database. Depending on the size of your library this operation could take some time, up to several hours for a very large library. When the main window appears you may have some extra Recovered folders/projects. This operation rebuilds the library from scratch and is usually successful at reviving problem libraries.

  • When I open Bridge Master Collection CS6, I get the message: There was a mistake in Bridge, therefor the cache cannot be read. Try to erase the central cache to solve the problem.

    When I open Bridge Master Collection CS6, I get the message: There was a mistake in Bridge, therefor the cache cannot be read. Try to erase the central cache to solve the problem. The solutions given by Adobe don't help me. Does anyone have another solution....????
    Als ik Bridge open krijg ik een venster te zien met de boodschap: Er is een fout opgetreden in Bridge waardoor de cache niet kan worden gelezen. Probeer de centrale cache te wissen in de cachevoorkeuren om de situatie op te lossen. De oplossingen van Adobe verhelpen het probleem niet, heeft iemand anders een oplossing .....????
    Alvast bedankt. Jaap Wals.

    When launching Bridge, press and hold down Command-Option (Mac) or Control-Alt (Win) + Shift to choose “Reset Preferences”, Purge Entire Thumbnail Cache”, and/or Reset Standard Workspaces”.

Maybe you are looking for