Why do I get the messagehis cowhy do I get the messageThis computer's local hostname "lenajs-imac.local" is alreamputer's local hostname "lenajs-imac.local" is already in use on this network. The name has been changed to "lenajs-imac-2.local".

why do I get the message "this computers local host name ______is already in use by the network

Usually this message means that you may have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. Disconnect the Ethernet cable or turn off Wi-Fi. If that's not the issue, shut down any virtual machines (Parallels, VMware, or VirtualBox) that are running. Rename the computer in the Sharing preference pane.

Similar Messages

Why would this appear on my screen? This computer's local hostname "Lloyds-iMac-4.local" is already in use on this network. The name has been changed to "Lloyds-iMac-5.local".

This popped up on my screen. No idea why. Have i been hacked?

There are several possible causes for this behavior.
1. Two (or more) computers on the local network have the same Bonjour name, such as "X's-MacBook-Pro.local". Resolve the name conflict by renaming one or more of them in the Sharing preference pane.
2. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
3. A Mac wakes from sleep due to network traffic. This is a bug in OS X that may only affect some models.
4. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
5. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
6. See also this support article.

This computer's local hostname is already in use on this network the name has been changed to

I've been getting this error after waking my computer from sleep. I think it has to do with my airport extreme. Does anyone have a fix?

Sometimes this message means that you have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. Disconnect the Ethernet cable or turn off Wi-Fi.
Sometimes it happens because a device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
Rename the computer in the Sharing preference pane.

This computer's local hostname is already in use on this network

has anyone else experienced this issue?
The iMac will display the following error message on the screen every day or so (with the host number incresing by 1 digit each time):
This computer's local hostname "MacName.local" is already in use on this network.The name has been changed to "MacName-1.local". This continues even after I've reset the name in the System Preferences panel/sharing settings, for example ("MacName-2.local, MacName-3.local, MacName-4.local" etc).
Please advise
Currently running an Apple iMac
OS 10.6.8
*please see attached screenshot for a reference

(1) Check names of all other devices on the network, including the router, any airport express, iphone, ipad, printers etc. Make sure these all have unique names.
(2) Do you have both wired ethernet as well as wireless active on any of these devices, including the Mac computer? This has been linked to such renaming behavior in the past, apparently the two methods of accessing the internet, if both are active at the same time, may switch off and on and conflict with one another (shouldn't happen, but apparently does sometimes). Solution is to switch one of them off.
(3) The following may be helpful:
In System Preferences > Network > Airport > Advanced > TCP/IP
Set "Configure iPv6" from "Automatically" to "Off".
If you do this, check to make sure that your email and other tools are still working properly. If something goes amiss, change the iPv6 back to what it was.
(4) Go to your router and reset power to it.
(5) Go to your router and check its LAN client table. Make sure that all entries should be there. Investigate any "extra" devices on the network. For instance, if it shows 4 devices, but you know you have only a computer and a printer, investigate what the other two are. Delete them from the list if they really seem to be "ghosts."

I recently got a message on my screen that says "the name of your computer is already in use on this network. The name has been changed to *

I recently got a message with an exclamation mark stating "your computer name is already in use on this network. The name has been changed to ______"
How did this happen, is it phishing, malware, or did someone hit some button on here to change it. I'm hoping that someone else doesn't have access to everything on my computer now. Help!

Hello RaptorTrish,
Interesting name! You don't say what computer you are using, the OS or the nature of the network, home, office etc. Could you fill in a few details.
You are right to be concerned but there is often a simple explanation.

HT5167 Error after 10.7.4 upgrade..."computer's local hostname ........is already in use on this network. The name has been changed to...... What to do now to get it back to status before 10.7.4 upgrade?

Error after 10.7.4 Lion Upgrade to iMac
Computer's local host name .......is already in use on this network. the name has been changed to........
and it keeps adding up the number each time I wake the iMac.
What to do to get it back before upgrade error?

Ok worth repeating, hope this works. Finally spoke to AppleCare Support and walked me thru following...restart computer holding down "command" and "option" keys at the same time with letters "P" and "R" when computer turns on. This is what he called a PR restart, clears out discrepancies in memory (if that is what the error message actually is). Then went to Systems Preferences/Network/Sharing and deleted the number that kept increasing every time MAC would wake up.
Even tho this was just done, I am hopeful that error pop-up won't happen again. Fingers crossed!

Every time i wake my mac i get This computer's local hostname "D-360.local" is already in use on this network. The name has been changed to "D-444.local".

error message that my local host name is in use and the system generates a new one every time I wake my mac the error mssg reads This computer’s local hostname “D-360.local” is already in use on this network. The name has been changed to “D-444.local”.

There are several possible causes for this behavior.
1. Two (or more) computers on the local network have the same Bonjour name, such as "X's-MacBook-Pro.local". Resolve the name conflict by renaming one or more of them in the Sharing preference pane.
2. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
3. A Mac wakes from sleep due to network traffic. This is a bug in OS X that may only affect some models.
4. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
5. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
6. See also this support article.

What does this mean? This computer's local hostname "Linda-Daviss-iMac-4.local" is already in use on this network. The name has been changed to "Linda-Daviss-iMac-5.local".

What does this mean: This computer’s local hostname “Linda-Daviss-iMac-4.local” is already in use on this network. The name has been changed to “Linda-Daviss-iMac-5.local”.
When I came back to my computer this message was on the screen. Should I be concerned ? or doing something?

Sometimes this message means that you have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. Disconnect the Ethernet cable or turn off Wi-Fi.
Sometimes it happens because a device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
Rename the computer in the Sharing preference pane.

Should I ok "this computer's local hostname Irma-Mac-mini-local" is already in use on this network. The name has been changed to Irma2 Mac-mini 2-local

Should I ok this message-this computer's local hostname Irma's Mac-mini-local is already in use on this network. The name has been changed to Irma's Mac-mini-2local

Don't think this is a conflict with IP Addresses or computer names
= DHCP hangover when computer renews DHCP lease
There is no actual other computer
It just appears that way when reconnects so creates new -2 computer name
What types of names do you use your computers ?
Whether you name them after quantum particles or the romantic poets...
They will each start to be appended with "-2" then "-3" etc if you auto configure network settings from Airport Router DHCP service and you have this Change computer name issue where pop up window states name is already being used on your LAN
As stated previous post you can reset the computer name in SysPrefs / Sharing / Edit button
And restart Router or renew all DHCP leases (if persists in not allowing original name)
Can now press Edit and reset name of choice
But for Fix see link above

I get this message:This computer's local hostname "x-8.local" is already in use on this network. The name has been changed to "x-9.local" I have turned off sharing and it continues to upgrade name. What is the fix?

I get this message: This computer’s local hostname “x-8.local” is already in use on this network. The name has been changed to “x-9.local” I have turned off sharing and it continues to upgrade name. What is the fix?

Hi, this is a common problem, mostly just irksome though.
It can have many cause, like using more than one Interface for connections, Router temporarily losing x.local & seeing a new connection with x.local already used, insists it must be x-1.local, x-2.local, etc..
What all Sharing do you have enabled?
Some possible fixes...
http://forums.macrumors.com/showthread.php?t=542899
https://discussions.apple.com/thread/3941367

Clicking on iTunes ikon and I get the message the item iTunes.exe that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly. What can I do, I can't open Itunes. I have over 4000 songs in iTunes that I had

When I click on the iTunes ikon I get a box pop up which reads Problem with shortcut. The item iTunes.exe that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly.
My computer which is a packard bell vista operating system, recently stopped working as the power supply overheated and blew up and it has recently been sent back to the Know How team at PC world and it seems to be since it came back I now cannot open iTunes. I have also tried to search for iTunes in the search bar, I can see several files, but can't seem to open any of these either. I think that quicktime isn't working, either.
I have over 4000 songs in iTunes that I had recorded from my collectiong of CD's am going to loose all these now? Can anyone help, with very easy instructions as I really don't know what I am doing??
Thanks

I would copy over the entire thing if you have room. With iTunes 10.4 though, you can download any previous iTunes purchases you have made in the past with your current iTunes account. While in iTunes, look at the left hand side of your screen and select "Purchases" and look at the bottom right corner of the screen and select "Download Previous Purchases". If you have an iPhone, iPod and/or iPad...you can do the same thing from each device. Nice new feature...just remember that those ripped CDs need a back-up!!! Enjoy...

I just downloaded the latest itunes update 11.1 and now I get an error messages saying "The item 'iTunes.exe' that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly."

I just downloaded the latest itunes update 11.1 for windows 7 and now when I try to open itunes with the shortcut on my desktop I get this error message: "The item 'itunes.exe' that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly." I can't open itunes at all. Is there anything I can do or is there a problem with the new update?

Start > Programs = Firefox
Does that shortcut work?
If so, delete the current shortcut that is in the Quick Start tray and drag the one that is in Start > Programs down there.

Can you track a form if the file name has been changed after distribution?

I created a form in Adobe Acrobat X Pro -- I then used the distribute feature and sent the form to myself using the internal server. After testing the form, and making sure all was good, I copied the attachment from the email I received when I distributed the form to myself, and sent it to my boss (via outlook). He then changed the file name, and sent the form out to our members. Our members are completing this newly-changed document instead of the original form. They are able to "Submit The Form", and it still looks as though its coming back to me via the dialogue box. However, I have no received any responses in my original document's tracking. When I tried submitting this new form myself to see what happened, I just received an message that says "Your response is being queued for submission", but it never tells you whether the form was actually submitted or not. Is there any way that you can track this form even though the file name has been changed? And if people are submitting their forms to me, where are they going?
Please help!
thanks,
desiree

I understand that you don't want to redo all the linking with the markers. You can try following (make a copy of your project first to be safe) :
- close your project and quit DVDSP
- move your old asset, and replace it with the new one
- reopen your project
A warning message should tell you that this asset has changed, but your marker will remain at old position. If the asset length are not the same, old length information will be used by DVDSP. To correct this, delete the asset from the timeline, and drop it back to the timeline.
Now you just have to move the marker to the right position.

BI Error Logical system name has been changed for this system

Hello All,
I have installed the BI system and did a client copy from 000 to 200 client with profile SAP_ALL.
Now I have loged into the system with client 200 and wen I run RSA1, I am getting the following error
message: "Logical system name has been changed for this system"
Thanks
Sekhar..

Hi,
Goto tcode SCC4.
Switch to change mode. (System will prompt that this table is cross client. Continue)
Select your client (in this case 200). Click on details button (next to change mode button)
Enter the proper logical system name in Logical system field.
Click on Save button.
Then try RSA1.
Hope it helps
regards,
Pruthvi R

BI:Logical system name has been changed for This System

Hi, Gurus,
I want to Use my IDES SAP ERP 7.0 as my BI system for training purposes,when iam executing the transaction RSA1 in the system it is giving message
"Logical system name has been changed for
system"
I Have changed the entries in table "RSADMINA" and maintained the Client no as 100 (My base client for BI) which i have copied from 001.
When iam executing the Transaction RSA1 in 100 it is giving above mentioned error ,whereas in 001 it is working fine.
Please Help . ..
I tried to change the system logical name by "bdls" but it doesnt worked........

Hi Deepak,
Check the entries in table RSLOGSYSMAP (this is meant for correct conversion of logical system names for tansports).
You can easily maintain the entries using tcode RSLGMP.
Hope it helps.
Grtx
Marco
PS I'm not a basis guy but do you have a correct BI installation yet?

Why do I get the messagehis cowhy do I get the messageThis computer's local hostname "lenajs-imac.local" is alreamputer's local hostname "lenajs-imac.local" is already in use on this network. The name has been changed to "lenajs-imac-2.local".

Similar Messages

Maybe you are looking for