Why do I get the wrong date on my photos and emails?

All my photos in iphoto and emails are coming up with the wrong date. Why is this and how can I correct it?
I have made sure that the computer's date and time are ok.

You may want to re-post in the iPhoto forum if it only happens in iPhoto.

Similar Messages

Why am I getting the wrong version of my photos in photo stream?

I am using iphoto '11 v. 9.2.1. Basically I have gone around in circles but firstly should say I have reset photo stream in icloud.com and on all devices including my Mac. I have iphoto on the Mac and have uploaded some photos from the camera from a recent trip. This is all as I would normally do. After a couple of edits I now have two versions of the photo in the event album - the edited and unedited both with the same name. I am guessing this is like the old iphoto's two libraries?? Anyway that's not really the problem I don't think but when I drag the edited version of the image to my photo stream (I have automatic turned off at the moment) it is the unedited version that shows up there.
Am I missing something obvious here? All I really want to do is use the photo stream to allow me to then save the images in a new folder on the ipad so I can bore some friends with our photos of the trip and of course I want to show them the beautiful edited versions not the unedited?
Thanks

Hi - thanks for the reply. I have tried your suggested test and it is the same
I also tried changing the name of the edited version and also deleted the original versions. My event folder was just left with all the edited versions but still when I dragged them over the the photo stream it showed the unedited.
Stuck - I am assuming that if when I save the file after editing I save as and create a completely different version then this would overcome the issue - I'm just not sure I should have to do that??
Thanks

TS4425 Why do I get the message "there's no photos in this album"

Why do I get the message "there's no photos in this album"?

hi
i was wondering if you found a solution to this issue because im getting the same message
thanks

In iMovie, why do I get the msg "high resolution video thumbnails and then it immediately starts with "now" and it's hung up for a long time

In iMovie, why do I get the msg "high resolution video thumbnails" and it automatically goes to Now and the laptop is hung up for a very long time and I have to shut down to get out of it?

Hi,
Welcome to the  Discussions
So we have DSL Modem <-> Base Station <-> Computer connected by Ethernet.
Is the Modem Routing ?
Is the Base Station set to "Share An IP" ?
(i.e are there two DHCP servers on your LAN ?)
Is Internet Sharing On in th G5s System Preferences > Sharing pane ?
In the Base Station is Port Mapping Protocol Enabled if it is doing routing ?
It is in the NAT tab of the Internet Pane.
Is the G5 also doing WiFi to the Base Station ?
Also check the Modem is not Blocking PINGS as this log shows no PING (But I am not sure it even got that far)
7:45 PM Thursday; February 18, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Why do I get "The form data has expired." every time with Flash formatted CFFORM moved to CF 9.1?

We are moving a ColdFusion site from CF8 to CF9.1 and have discovered that any CFForm that was uses Flash as it's format keeps giving us the "The form data has expired." error almost every time we visit the page containing the form. We have fiddled with the timeout settings and even tried to add the various "cfheader" workarounds that some people have mentioned when getting this error, but to no avail. To be clear this works perfectly on CF8 *and* it works on our CF 9.1 QA server, but for some reason fails on the Live Server. Supposedly the Live server completely matches the QA server, but the behavior is sure different in this instance.
What could be the issues? What Apache or CF settings might I look into? Could there be some weird permissions error on the generated swf form file or some other obscure reason? I am totally in the dark and can't figure out why ColdFusion keeps thinking the form data has expired.
Please, any ideas would be welcome.
Thanks!

Make sure the web server settings between the QA and the Production servers are also compatible.
I suspect your suspecion about permissions is the closest to the answer. But this is a little out of my depth of expertise.
Realize that ColdFusion default behavior is to NOT generate and actual swf FILE. Rather what it does is generate the swf content in memory and directly deliver it to the client. But if the web server is configured to look for an actual file system file you may have a clash going on

Why do i get the wrong Y co-ordinate from a Jbutton?

i have a jbutton
within a jpanel
this jpanel and some other are within a jtabbedpane
the jtabbedpane is inside a jframe
(between the jframe and the jtabbedpane there's also a bar tho i think it doesnt mattter)
when i get the jbutton coordinates with .getX(); and .getY();
i get the correct X coordinate
but i get the wrong Y coordinate (the Y coordinate i get is at the top of my jframe window)
why?
how can i get the real Y coordinate of the jbutton?

askrym wrote:
i'm calling
<obj of jbutton>.getX();
........... .getY();That should give the same results as getLocation. See the two posts above your last for your solution.

IPhoto gets the wrong date/time when importing photos

I just imported a bunch of photos from a Canon Digital Rebel XT. I took the photos today, 10/22/05, but iPhoto has them labelled with yesterday's date. Furthermore, the times are incorrect, with AM and PM apparently switched.
Looking back now, it seems that there's the same problem with all of the photos I've imported with this camera (which I got last month). I don't know if iPhoto has been screwing these things up the whole time, or if this is something that just happened.
I've just triple checked the date/time setting on the camera and confirmed that it is correct. I've confirmed that my computer's date & time are correct also. The other data imported with each photo appears to be correct (e.g. camera make & modal, focal length, ISO speed, etc.).
Anyone have any idea what's going on and how I can fix it?

Jason,
Which date are you referring to? The EXIF date that is in the Get info window, or the date that is listed in the left info window. If it is the date that is in the info window on the left it is easy enough to fix. Just highlight and put in the correct date. If you need to do this to a lot of images then use the batch change function.
If the EXIF data is wrong, I recommend using the software from canon to get the best EXIF data added to your pics. I realize this adds an additional step, but it will fix your problem. The other thing is that if you start to shoot in RAW, your camera is not supported by iPhoto. So if you attempt to import RAW files from the XT directly into iPhoto it will not import them. I have this camera and it is one of the reasons I have stopped using iPhoto for most things.
You can get the latest versions of the canon software from Canon.com I recommend using these as they are much better than what was in the box that came with my XT. If you plan on working with RAW get the Digital Photo Professional (DDP) Along with the Canons image browser. Both work well on my powerbook and should be great on a Powermac.
Hope this helps.
Matt

Why do I get the symbol data link in the query_name of the data model

If I use an inline subquery within the SELECT of a data model query, the symbol data link appears in the query_name of the data model.
This causes the data link between two queries not to be used even if there is an existing link between the two. The trace file doesn't
have that join condition and so the child query in which the inline subquery was added fetches many redundant data.
Any idea what that symbol represents and how to get rid of it. It also appears during other times, not only when we use inline subquery
within a SELECT. Not sure if it can cause any harm to the report.
The problem is seen in Report Builder 6.0.8.19.0. Not sure if the problem is with other releases also.
Any suggestions are welcome.

I am living with the symbol in the query box as well, because my report only has a single query. My query also has several inline subqueries. I had never seen this before last week, spent a day re-reading the manuals and couldn't figure it out.
My post is not a solution, but a "me too" echo that could use an answer.
Troy Tremble
If I use an inline subquery within the SELECT of a data model query, the symbol data link appears in the query_name of the data model.
This causes the data link between two queries not to be used even if there is an existing link between the two. The trace file doesn't
have that join condition and so the child query in which the inline subquery was added fetches many redundant data.
Any idea what that symbol represents and how to get rid of it. It also appears during other times, not only when we use inline subquery
within a SELECT. Not sure if it can cause any harm to the report.
The problem is seen in Report Builder 6.0.8.19.0. Not sure if the problem is with other releases also.
Any suggestions are welcome.

Getting the exact date of current week and current month

I would like to know is there any methods to know the exact date of the current week and current month?

//use this function like this
//String date = getNow();
public static String getNow()
     Calendar cal = new GregorianCalendar();
     // Get the components of the time
     int hour24 = cal.get(Calendar.HOUR_OF_DAY); // 0..23
     int min = cal.get(Calendar.MINUTE); // 0..59
     int sec = cal.get(Calendar.SECOND); // 0..59
     // Get the components of the date
     int year = cal.get(Calendar.YEAR); // 2002
     int month = 1 + cal.get(Calendar.MONTH); // 0=Jan, 1=Feb, ...
     int day = cal.get(Calendar.DAY_OF_MONTH); // 1...
     String timeStamp = String.valueOf(year) + "-" + addZero(month)+ "-" + addZero(day)
          + " " + addZero(hour24)+ ":" + addZero(min) + ":"+ addZero(sec) + ".0";
     return timeStamp;
public static String addZero(int num)//this function works with the getNow() function
//all it does is adds a zero to an int if its less then ten
     String val = "";
     if(num < 10)
     val +="0"+num;
     }else{
     val = String.valueOf(num);
     return val;
}

Why do i get the alert window when i try to email photos from iphoto?

Each time i try to email photos from iphoto i get a window with an exclamation mark over the iphoto logo. I'm guessing that the email has not been sent but why?

Go to the photo that you're trying to email and double click on it. If the resulting window has the exclamation mark that means that iPhoto has broken the file path/link to the original file.
Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
iPhoto 8 (09) and earlier- run the options indicated
iPhoto 9 (11) and later- run Option #4 to rebuild the database
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager (iPhoto 8 or earlier or IPhoto 11 and later) and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the
File ➙ Rebuild Library (iPhoto 8 or earlier)
or
Library ➙ Rebuild Library (iPhoto 9 or later)
menu option to rebuild the library.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Why do I get the 'Firefox is not responding' message and the screen hangs when I am in Facebook Farmville?

This happens MANY times when I am in Farmville. I also get the box in the center of the screen about running scripts. It all started about 1-2 weeks ago.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

How to get the PDF data which i have send to Spool

Dear Freinds,
               My requirement is to display the output which iam getting from a custom report(ZSALARY) in the form of PDF . So now i wanted to display the ALV output on to my desktop (as of now) in PDF format.
i have done the below coding please correct me why iam not getting the same data which is coming out of my report in the PDF, iam passing the same internal table.
IF NOT it_final[] IS INITIAL.       -
>IT_FINAL is my main internal table in the report ZSALARY
      DATA : count TYPE syprcop,
         days TYPE sypexpi,
         params TYPE pri_params,
         valid TYPE c,
      pdf_table TYPE rcl_bag_tline,
      spoolid TYPE rspoid,
      pdf_fsize TYPE i.
        CALL FUNCTION 'GET_PRINT_PARAMETERS'
          EXPORTING
            destination    = 'LP01'
            copies         = count
            list_name      = 'ZSALARY'   -
tHIS IS MY REPORT NAME
            list_text      = 'ZSSPOOL'
            immediately    = ' '
            release        = 'X'
            new_list_id    = 'X'
            expiration     = days
            line_size      = 90
            line_count     = 65
            layout         = 'X_PAPER'
            sap_cover_page = 'X'
            receiver       = 'SAP*'
            department     = 'System'
            no_dialog      = 'X'
          IMPORTING
            out_parameters = params
            valid          = valid.
        NEW-PAGE PRINT ON PARAMETERS params NO DIALOG.
        WRITE : 'hi this is the test for spool'.
        NEW-PAGE PRINT OFF.
        COMMIT WORK.
        WRITE : / 'The Spool no is ', sy-spono. "system variable for spool no
        spoolid = sy-spono   .       -
At this point i can see the spool no.
        CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
          EXPORTING
            src_spoolid   = spoolid
            no_dialog     = 'X'
          IMPORTING
            pdf_bytecount = pdf_fsize
          TABLES
            pdf           = pdf_table
          EXCEPTIONS
            OTHERS        = 0.
        CHECK sy-subrc = 0.
        CALL FUNCTION 'GUI_DOWNLOAD'
          EXPORTING
            bin_filesize = pdf_fsize
            filename                = 'C:\Documents and Settings\Administrator\Desktop\test.pdf'
            filetype                = 'BIN'
          TABLES
            data_tab                = it_final
          EXCEPTIONS
            file_write_error        = 1
            no_batch                = 2
            gui_refuse_filetransfer = 3
            invalid_type            = 4
            OTHERS                  = 5.
      ENDIF.
if i go and on my desktop it is saying the below error "ADOBE READER COUDNT OPEN 'test.pdf'
because it is either not supported file type or because the file has been damaged.
my aim is to get the data which is there in IT_final in the PDF .....please correct me the parameters which i have given wrong. my doubt is in GUI_download fM in the tables should i pass it_final or
the pdf_table coming from'CONVERT_ABAPSPOOLJOB_2_PDF'...... i tried this option iam able to open and it is just giving message which i kept before this FM i.e WRITE : 'hi this is the test for spool'.
what i should to get my internal table data.
Pls help.
regards
srinivas.

Dear Karthik,
          Thank you for giving me the link there by iam able to get the ouput download int he pdf
as below code , but now a small problem for me .......i have 10 fileds in the Report ouput ....but however in the pdf output i can see only 8 fields and the two fields got truncated . Could you please tell me what
i have to change in my below code so that i can get all the values
IF NOT it_final[] IS INITIAL.
data : it_tsp01 type standard table of tsp01,
       l_wa_tsp01 type tsp01.
        CALL FUNCTION 'GET_PRINT_PARAMETERS'
          EXPORTING
            destination    = 'LP01'
            copies         = count
            list_name      = 'ZHR_BON'
            list_text      = 'ZSSPOOL'
            immediately    = ' '
            release        = 'X'
            new_list_id    = 'X'
            expiration     = days
            line_size      = 90
            line_count     = 65
            layout         = 'X_PAPER'
            sap_cover_page = 'X'
            receiver       = 'SAP*'
            department     = 'System'
            no_dialog      = 'X'
          IMPORTING
            out_parameters = params
            valid          = valid.
SUBMIT (sy-repid) TO SAP-SPOOL
                 SPOOL PARAMETERS mstr_print_parms
                 WITHOUT SPOOL DYNPRO
                WITH pnppernr = p0001-pernr
                 AND RETURN.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
          EXPORTING
            src_spoolid   = spoolid
             no_dialog     = 'X'
             DST_DEVICE = params-PDEST
           IMPORTING
           pdf_bytecount = pdf_fsize
          TABLES
            pdf           = pdf_table
          EXCEPTIONS
            OTHERS        = 0.
        CHECK sy-subrc = 0.
        CALL FUNCTION 'GUI_DOWNLOAD'
          EXPORTING
            bin_filesize            = pdf_fsize
            filename                = 'C:\Documents and Settings\Administrator\Desktop\test.pdf'
            filetype                = 'BIN'
          TABLES
            data_tab                = pdf_table    "it_final
          EXCEPTIONS
            file_write_error        = 1
            no_batch                = 2
            gui_refuse_filetransfer = 3
            invalid_type            = 4
            OTHERS                  = 5.
      ENDIF.
Please tell me how i can get the all the fields which are there in my normal alv output ......
Case 1) .i wanted all the 10 fields in PDF to be displayed without truncated , I have checked in Spool ........ i found all the fields are there .....but however when i check the downloaed PDF i can see some fields are getting truncated.
Case 2) However if on the ALV output if the user hides 2 fields out of 10 fields then only 8 feilds which are appearing on the output before sending the Spool should only be displayed in PDF as well -
> for this scenario what i have to do.
Thanks Once again.
regars
srini.

How to get the pixel data so as to work on it?

Hi all,
I am trying to write a plug-in that will crop and scale the image, edit the selection in the image document based on image data. For this purpose I need the pixel data of the image. How to get the image data as different pixels and what is the data structure used to store this data?
Assumption: No layers i.e., only background
Thanks in advance,
Sailu

Hi Ilya,
Thank you for your post. In the plugin architecture you propose (automation + filter), do you have an idea about how to share the pixel data between the two plugins? I have found a post that gives details about how to get pixel data and show it using ADM components
Matthew Hollingworth, "ADM Color Managed Preview?" #1, 22 Oct 2007 11:53 pm but it supposes that you have a filter plug-in.
Again, does anyone knows how to preview the current image in a AUTOMATION plug in? This seems impossible.
Thank you all for your help
Cheers,
Chaker

Why do we get the data from a view to a report.

hi
why do we get the data from a view to a report. is it possible to get the data from a view in all the cases?

hi Jyotssna,
Suppose you are planning to get the data from multiple tables then you got to specify seveal condtions and make use of joins which results in poor performance in fetching the data . In order to improve the performance we make use of views where the conditions of different tables are defined and the data is fetched accordingly.
Regards,
Santosh

Why i always get the message "Oops! Something just went wrong on our server! We've logged the prbl"

why i always get the message "Oops! Something just went wrong on our server! We've logged the problem and will fix it as soon as possible. Sorry for the inconvenience." everytime i added new apps on eprintcenter.

I will need a little more information in order to help out. What model of printer is it that you own? Are you able to ePrint with the machine when you send emails to it? Have you every been able to successfully download apps to the machine without getting the error message? Do the apps that you download successfully download at any time after that error and later work?
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Why do I get the wrong date on my photos and emails?

Similar Messages

Maybe you are looking for