Why do I get this FaceTime message when I try to open it on my mac...?

When trying to operate FaceTime on my Mac I get a message "This beta version of Facetime has expired. you cant use this version." and that's it...nothing else...no help or ability to check how to update etc...I have checked out troubleshooting Facetime on my mac and nothing in there either...any ideas? Thanks.

Wuz
Yes, I am sure that must be very reassuring....I really only use it to communicate with my 9 year old neice, who happens to live in the same town! It's a bit of fun for her!
Once again, thank you for your help.
LaydeeP

Similar Messages

  • Why am I getting this error message when I try to open a photo in Preview?

    I am getting the following message when I try to open a photo in Preview. I have searched for possible solutions and nothing works for me. I have always used Preview to edit photos.

    Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Drag or copy — do not type — the following line into the Terminal window, then press return:
    chmod -R -N ~
    The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
    sudo !!
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
    Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
    In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens. You’re not going to reset the password.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select  ▹ Restart from the menu bar.

  • Can someone tell me why we are getting this error message when users try to open?

    It was created in LiveCycle and Reader Extensions were given before posting it to the website.  Normally if you open in Firefox or IE, it will work (sometimes).

    We would also really appreciate an answer to this question.  We are having the exact same issue with some new forms we have created.  They were created in Adobe LiveCycle Designer ES4, and then usage rights were extended in Adobe Acrobat XI Pro. 
    When this issue is encountered we send the old version of the form, it was created using the same process a number of years ago, so the only difference is that we were using older versions of both programs.  The same recipients who have an issue with the new form are always able to open the old forms.
    Help!  Does anyone have a solution. Thanks very much!

  • Error Message regarding Facetime: I am getting this error message when I try to open Facetime on my iMac desktop "This beta version of FaceTime has expired." What does it mean? How do I get it to work again?

    I am getting this error message when I try to open Facetime on my iMac desktop "This beta version of FaceTime has expired." What does it mean? How do I get it to work again?

    The Beta version of Facetime is a free test/trial version that Apple placed on some computers in the past.  It has expired -- to get a working Facetime version back you must go to the App store and purchase "Facetime for Mac" which will cost you 99 cents. 

  • Why am I getting this error message when I try to import? "The following files were not imported because they could not be read. (645)" I can see them :(

    Why am I getting this error message when I try to import? "The following files were not imported because they could not be read. (645)" I can see them
    Is was working this morning!

    Depends on your operating system
    Go to google, try typing in
    Change permissions Windows
    or
    Change permissions Mac

  • GetLastError: 1392 - why do I get this error message when I try to uninstall Acrobat XI Pro?

    GetLastError: 1392 - why do I get this error message when I try to uninstall Acrobat XI Pro?

    Hi uckldag,
    Please try uninstalling using Acrobat Cleaner tool ( Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs ) and check.
    Regards,
    Rave

  • I'M GETTING THIS ERROR MESSAGE WHEN I TRY TO OPEN THE ITUNES

    im getting this message when i try to open my itunes "the itune library. itl file it's locked, on a locked disk, or you do not have write permission for this file" it was was working fine but all of a sudden it this issue just happen, i have windows 7.

    I had the same problem as mentioned above. 2 Users, sharing the same iTunes account. Found following solution:
    Check sharing and permission for the shared iTunes folder. In my case under HD->Users->Shared->iTunes
    Also check all permissions of the underlying folders and especially *iTunes Library Database file*. In my case directly in the iTunes directory
    For whatever reason, that file had no sharing. I added my wife's user name with Read /Write permission and it works again.
    I guess a bug in the update. It worked fine for a long time before the update.
    Mark

  • I keep getting this error message when I try to open a project?

    Projects created with Adobe Premiere Pro and Adobe Premiere Elements are not compatibe. Please use the appropriate application to open this project.
    I have tryed to open old projects/start new and just keep getting this message.
    Thanks in advance for the help.

    Leha23
    Thanks for the follow up. Let us go through the usual drill for users of Premiere Elements 8 (not too old from my point of view).
    1. Are you working from the 8.0.1 Update of the program? That is very important for everyday performance of the version.
    2. Do you have the automatic features of Background Rendering and AutoAnalyzer turned off. Very important since they are major grabbers of computer resources. Both are in preferences, Background Rendering in the Premiere Elements workspace Edit Menu/Preferences/General and AutoAnalyzer in the Elements Organizer workspace Edit Menu/Preferences/AutoAnalzyer options.
    3. Let us try flushing the preferences...the path for Windows 8 64 bit would be
    Local Disk C
    Users
    Owner
    AppData
    Roaming
    Adobe
    Premiere Elements
    8.0
    and in the 8.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not do the job, the delete the whole 8.0 Folder in which the Adobe Premiere Elements Prefs exists.
    Make sure to be working from Folder Options Show Hidden Files, Folders, and Drives active so that you can see the complete path.
    I did not see anything in Hunt's link that cited your error message specifically. It appeared to be an overall troubleshooting article on damaged projects. I did not go down that path since you said that you are having the error message problem with new as well as old projects.
    About 3 years ago, I worked with another Premiere Elements 8 user with this same error message. In that case, it spontaneous disappeared. When you get this error message, does it present with an OK or Continue button? This problem has been reported before here and with Premiere Elements 8.0/8.0.1. In each case, the core of the problem was left undefined.
    Looking forward to your follow up.
    Thanks.
    ATR

  • I am getting this error message when i try to open FF "ug-in object: TypeError: Components.classes[cid] is undefined"

    This is the error message I get when i click to open FF after i downloaded the newest version: "ug-in object: TypeError: Components.classes[cid] is undefined" . The message is in the top left corner and not fully visible. i sent a message a few min ago so i am sending this b/c i copied the error message to help diagnose the problem.

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • I get this error message when I try to open my google calendar:

    We've detected a problem with your cookie settings.
    Enable cookies
    Make sure your cookies are enabled. To enable cookies, follow these browser-specific instructions.
    Clear cache and cookies
    If you have cookies enabled but are still having trouble, clear your browser's cache and cookies.
    Adjust your privacy settings
    If clearing your cache and cookies doesn't resolve the problem, try adjusting your browser's privacy settings. If your settings are on high, manually add www.google.com to your list of allowed sites.
    I did the first two...no luck. Not sure how to do the 3rd. I had no problems yesterday.
    thanks

    forget it....got it figured out.
    thanks!

  • Why do i get the following message when i attempt to open my backup file for lightroom cc?  "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened".  This message just started coming  up after downloadi

    why do i get the following message when i attempt to open my backup file for lightroom cc?  "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened".  This message just started coming  up after downloading lightroom cc (previously using lightroom 5)...am i backing up properly or not???

    Open Pictures folder and move the files named lrcat-journal and lrcat.lock to Desktop.
    Make sure that , they are not inside Pictures folder any more and try to open backup from Lighrtroom and check..
    Any LRcat file with .lock extension , move it to Desktop.

  • Why do I get this error message when I open Organizer in Photoshop Elements 11 "Elements Organizer has stopped working"? My only option is to Close Program so I am effectively locked out of my photo catalogue.  I have reinstalled the program to no avail.

    Why do I get this error message when I open Organizer in Photoshop Elements 11 "Elements Organizer has stopped working"? My only option is to Close Program so I am effectively locked out of my photo catalogue. I have tried reinstalling the program but it made no difference to the error message.
    Could someone help please?  Steph

    Hi,
    Please give a try to Photoshop Elements (PSE) knowledge base. steps mentioned on this and see if it works.
    Regards
    Kishan

  • I get this error message when I try to back up my laptop:  Time machine could not complete the backup.  The backup disc image "/Volumes/Data/Lou Ann Buesing's Mac Book Pro. sparse bundle is already in use.  Anyone know how to fix it?

    I get this error message when I try to back up my laptop:
    ' Time machine could not complete the backup.  The backup disc image "/Volumes/Data/Lou Ann Buesing's Mac Book Pro. sparse bundle' is already in use. "
    Anyone know how to fix it?

    Reboot the TC.. Sometimes you need to reboot the whole network.
    This is what comes of Lion and then made worse in Mountain Lion of Apple not spending enough time to fix the bugs.
    Read C12 in pondini.
    http://pondini.org/TM/Troubleshooting.html
    C17 can be related I think.

  • Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.

    Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.

    AMDS for Windows
    http://support.apple.com/kb/TS1567

  • I get this error message when I try to email photos using iPhoto: Your email did not go through because the server did not reply.

    I get this error message when I try to email photos using iPhoto: Your email did not go through because the server did not reply. How can I get this to work when my internet is connected?

    Are you able to email from Mail with those two accounts?  If so:
    1 - go to iPhoto's Accounts preference pane and delete both accounts. Now add them back and try again.
    2 - a better solution IMO is to set Mail as the email client for iPhoto is iPhoto's General preference pane.  This gives you better access to your contacts, a sent copy of all emails and, if you want a layout similar to iPhoto's, photo layouts located in Mail's stationary.

Maybe you are looking for

  • Error in writing to file - Oracle

    Dear All, We have to upgrade Oracle from 10.2.0.2 to 11.2.0.2. For this we are applying patches till 10.2.0.4. OS is AIX 6.1. Before proceeding I have stopped SAP, DB, Listerner and emctl also. But after starting the patches we found the msg that, Er

  • I can not install iTunes on my Win 64 OS; it keeps getting an error

    Hello, I just got my new laptop and was trying to install iTunes 10.x (the newest version). I keep getting error any suggestions?

  • How do I Turn off my Optical Disc Drive - Satellite: P745-S4217

    I would like to turn off the Optical Disk Drive because the ODD checks for a disc every now and then, very randomly (I can hear and feel the laser tray move around looking for a disc, I can't imagine that it is very good for it to do this so often) a

  • Tecra M3 - how do I make it quieter?

    It seems that the fan turns itself on even when i am not doing anything with the laptop and there are only a few essential background processes running. I have tried setting the cooling performance to 'Performance' instead of 'Max. performance', but

  • Org.apache.soap.rpc.Call is hanging on invoke()...

    Hi. What do you do when you're making a call to a webservice with org.apache.soap.rpc.Calland it just plain hangs on the Call.Invoke() method? -pfv