Why do i get vertical streaks on the page when i print with my laserjet 1536?

i have hp paper, replaced the cartridge, replaced the printer, cleaned the paper path, and still have the problem

the glass strip on the left of the glass might need cleaning.

Similar Messages

My report is printing half of the page when I print the report Hp psc 1315

My report is printing half of the page when I print the report in this printer
Hp psc 1315 all in-one and when the operating system is windows xp , but when
I run the same report in windows me , and the same printer it is running well
And my report version is :
Report Builder 6.0.8.23.0
ORACLE Server Release 8.0.6.0.0
Oracle Procedure Builder 6.0.8.20.0
waiting for your valuable answer .
Best regards
Jamil alshaibani

i would like to now if there is any additional software required for the windows xp and oracle report to solve this problem
please help
betst regards
jamil alshaibani

I am doing a book. Can I select the option of 13 photos on a page, put only one photo on the page in the middle box and expect the page to be printed with only that picture surrounded by white?

I am doing a book. Can I select the option of 13 photos on a page, put only one photo in the middle box and expect the rest of the page to be printed with only white aroind that photo in the middle?

No
All photos frames must contain photos or you can not order the book
LN

I get vertical lines below the text when I type

After upgrading to Firefox 4 in Windows 7 I get vertical line that appear below what I type. This is not happening with other browsers. Anybody else experiencing this or have a solution?

This problem should not be because of hardware acceleration and I think I found the answer. I was getting odd graphical iisues in Firefox 4. Not just with the strange vertical lines. By disabling hardware accelration it did indeed fix the issue with the lines underneath where I typed in boxes. But the other problems were still an issue. I tried to fix the other issue by disabling all my addons and it did not make any difference. BUT when I restarted Firefox 4 in safe mode it did. Which led me to believe something else was at play here.
I remembered the UserChrome.css I had in my Firefox profile folder. I renamed that file and restarted Firefox. All my graphical bugs vanished. Out of curiousity I also enabled hardware acceleration. Voila! No more vertical lines either!
Now I did a reinstall of Firefox 4 just to check if it created a UserChrome.cc file but it did not. So I can only assume that there is something in that old file that others have when upgrading from Firefox 3 that causes this issue and other graphic probs.
I advise anyone who noticed this issue to try renaming UserChrome.css if it exists and see if it resolves the issue or not.

Will the web address show up on the bottom of the page when I print my forms?

I am still in preview mode, and am not ready to go live yet with my forms, but will be soon. But when I am testing the forms and I print them, the web address prints on the bottom of the page. Will this continue to happen when my forms are live and found on my website, or will a web address always show up on the bottom of the form when it is being printed? We keep a lot of our forms in paper copy for records and it looks sloppy with that on the printed version.

The browser puts that there, not us. Check your print setup options.
You can also save out the form as PDF and print that.
Randy

Why do I get redirected to a blank page when I try to download .dmg files?

I have been having real difficulties for about the last 2 months downloading .dmg files. Instead, I have often been redirected to a blank page, which takes a while to load and the downloads window in my Safari browser does not recognize the download at all. If I try to "save target as" I simply get a useless HTML file. Anyone else have the same problem?

Make sure your software is up to date. Click your Apple menu / Software Update...

When I print a picture and send it to my HP e-mail address I get vertical lines in the picture?

I would like to know how to get rid of the vertical lines in the pictures when I send a picture to my HP e-mail address that came with my new printer also I seen in the HP E printer settings that there is no 4/6 option to select
the 5510 Smart printer that I have I was disappointed to find out that the fandango app is not compatible with this printer
and I was wondering when it would be available for my printer.
how to fix that problem with the E print feature on my printer.
thank you for any assistance that you could give me
This question was solved.
View Solution.

Hi Shiba,
I understand that your printer is not printing picures as expected. I know you stated that you had tried troubleshooting steps above. Where you able to take a look at this document? Are you printing from a mobile device or computer?
Hope this helps.
**If you find this helpful or want to say thanks make sure to click the white star under my name to give me Kudos. **

Why am I getting messages such as "The command "Image Size" is not currently available" when trying to run an Action that has always worked in the past and when the particular Commands do work if used by themselves?

Why am I getting messages such as "The command Image Size is not currently available whenever I try to run an Action that uses the particular command (and which has always worked fine previously) and when the particular command works fine when used on its own?

I would think that image size would always be available when there is an active document in Photoshop. The only time I remember seeing messages like that where they should work was during the five month period when Adobe released CS6 with so many bugs which took Adobe five months to fix. During those five month messages like that that should not have happen were common when action switch between documents. Adobe would start processing the next Action step before the document switch completed, Any step that required an active document could fail with a mess stating the command is not available.
Are you by some chance using CS6 version 13.0 CS6 without any updates. Use Photoshop menu Help>About Photoshop. If it shows CS6 version 13.0 you need to update CS6. .

Why do i get a window in the lower right corner of the screen that says "high memory usage"

why do I get a window in the lower right corner of the screen that says "high memory usage" on my compaq presario using windows xp home edition?

Hi,
No just turn the monitor off, not the product off. Which version of NIS are you using ? Please see the following screen:
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Why do I get a norwegian version of MUSE when all the other Adobe programs are in english version? I have setup the installer to English.

Why do I get a norwegian version of MUSE when all the other Adobe programs are in english version? I have setup the installer to English.

Muse uses AIR and if that is installed in Norwegian, so Muse will show stuff in that language. You may simply need to reinstall Adobe AIR in English.
Mylenium

HT1918 why am i getting 'your purchase cannot be completed' when gifting apps. worked first 3 times then this.

why am i getting 'your purchase cannot be completed' when gifting apps. It worked for 3 purchases then stopped

Pete, you have found like many before you, that eventually software becomes out of date, where software developers at different points no longer support old versions of their product, which eventually fossilizes your computer. It is inevitable.
You have heard of dog years, well computer years are even shorter, which makes your seven year old laptop certainly middle aged. It is still useful, running the applications it always has, so keep it. But online its years will show.
With the internet, new software developments affect browsers, and plugins, with java, flash etc.
Software development is often in step with hardware innovation, and most Apple hardware is not very upgradable and Apple don't support things for very long.
This leaves you with a an old PowerBook that will still be good for the things it does, though it will have increasing limitations with some modern internet media sites.
Mozilla no longer support 10.4 Tiger but fortunately there is a group who have kept it alive with their version of Firefox,
http://www.floodgap.com/software/tenfourfox/
Check it out, it may be just what your need.

Why does my image not reach the edges of the page when printed, but appears fine as pdf?

Why does my image not reach the edges of the page when printed, but appears fine as pdf?

Check a printable area of your printer.
Make a (grey) rectangle that is larger than the paper size. Print it,
you'll get a message that some cropping will occur, that's okay. Then take a
ruler and measure the dimensions of the rectangle printed on the paper or
the white borders around the printed rectangle.

Why are my images scrolling from outside the Page width?

Why are my images scrolling from outside the Page width? I am positive i has all the settings correct, to have an image parallax scroll from the edge of the page into the page and out again. But the images are flying in from the browser width - not the page width. This is not the effect I am after.
Any suggestions on how to fix this? Given the key position is only linked to the height, I can't for the life of me work out how to ensure the images start moving from a certain position onthe left and right of the page.
Thanks

I think the effect you are seeing is a result of how the lineHeight is set up. By default, the lineHeight will be calculated as 120% of the size of the largest thing on the line -- in your case, this is the inline graphic. This is designed to leave space between the line before and the line with the graphic. So it is taking the height of the graphic, multiplying by 120%, and making this the distance between the previous line and the line with the graphic. So the bigger the graphic, the bigger the space above the graphic. Normally this works well with text, but in this case you may want to get closer to "set solid". You can do this by setting the lineHeight to 100%. Or you may wish to leave a couple of percent for the descenders of the previous line. Or, another alternative that may work well for you if you really know exactly where you want the line set, you could measure the graphic, add on the number of extra pixels to leave for the descenders, and make the lineHeight a constant. So you could do something like this:
<img lineHeight="104%" height="411"/>
or this:
<img lineHeight="423" height="411"/>
Obviously you would still need to specify the source and any other parameters you want on the image.
Note that if you are trying to fit a 200 pixel high graphic into a 200 pixel high container, you will hit the same problem -- in order to fit the graphic, the container will have to be slightly bigger than the graphic in order to fit the descenders on the last line. This is true even if the last line contains only the graphic, and no descenders (or text) at all.
Hope this helps,
- robin

Why do we get a load of rubbish software when we perform a Flash Update?

Why do we get a load of rubbish software when we perform a Flash Update?

HKHash wrote:
All I know is that after I inocently updated my Adobe Flash I gained three programs (I did not ask for or want) - one was backup, another offered to make my PC run faster and the last was mysearchdial Search which managed to update my default web page. (What right have you got to allow this?). To remove these programs took me 20+ minutes as each required me to reboot. I've lost my trust in Adobe
Those DID NOT come from an Adobe update.
Note: the ONLY software that is bundled with Adobe "freeware" is:
McAfee Security Scan
Norton Security Scan
Google Chrome and Toolbar
Lightroom (trial - Mac ONLY)
Whatever you downloaded and installed was from a third party site and more than likely WAS NOT a legitimate download of Flash Player, if it was Flash Player at all.

Why do I get a conversion failure every time when I try to merge documents together???

Why do I get a conversion failure every time when I try to merge documents together???

Hi mdrhine,
I'm sorry that you've been unable to merge files. Let's see what we can figure out.
Are you unable to merge any files? How large are the files that you're trying to merge, and how many are you trying to merge at once?
If you're merging more than a few files, or those files are particularly large, ttry merging those files in smaller batches. If one or more files is causing the conversion failure, merging in smaller batches should help you isolate the problematic file or files.
I look forward to hearing back from you with some details about the files that you're trying to merge.
Best,
Sara

Why do i get vertical streaks on the page when i print with my laserjet 1536?

Similar Messages

Maybe you are looking for