Why do i getThe following clip encountered an error during import and is still referencing media on the camera:

When importing in FCPX 10.1.3 I get: The following clip encountered an error during import and is still referencing media on the camera: ??? anyone

I get this sometimes too, when importing from P2 cards. Sometimes it takes me a few tries to get it imported. I have noticed that it seems to work better when I actually mark an IN and Out for the clip, but that's not totally a solution.

Similar Messages

Message: The following clip encountered an error during import and is still referencing media on the camera:

I am getting this message when I try to import files from Canon C100: The following clip encountered an error during import and is still referencing media on the camera:
These are AVCHD files and it seems to be happening randomly. With different clips as I try to import...happening both with regular importing and with Create Optimized Media...
It just started happening yesterday-never had this problem before and have uploaded countless times with this camera and system. THanks.

Update: OK, I just tried to import the footage into another hard drive (an internal hard drive) and it seems to be going fine now. Maybe something is corrupted on the external hard drive I was importing into...wierd.

Import failed the following clip encountered an error during import and is still referencing media on the camera

This is one of the many error windows I'm getting. This MVI_9935 is from 5DMIII. But I'm also getting the same errors for other files with the exact same error message for Panasonic AF100. All shot at 23.976fps.
* 5D is h.264. They're all about the maximum lengths (of ~30 minutes).
* Panasonic footage is AVCHD wrapped MTS files. Two clips of this kind are about 75 minutes long each.
I have dealt with this problem by doing ALL of the steps I've read so far for each shoot and it takes too long... I'm doing
1) making FCPX archives
2) copying the all of the contents from each card (with the file structure intact) and pasting them onto an external hard drive (eSATA with 3TB space... with a plenty of empty space ~ 1TB)
3) copying and pasting just the video files onto an internal hard drive (separate from the system drive but same as where the project files are)
And I click through each error window (which takes about a full working day or more) and then when I _still_ see missing footage indicated by
that little "video camera" icon on the bottom left (as you can see above). What I do at this point is to:
1) re-import from one of the FCPX Archives, and if this does not work, I
2) re-import from one of the directly copied files.
Sometimes, I need to create a new event and re-import if the clip is still **referencing** the media on the camera.
I did not have this problem **before** FCPX's import window combined both spanned clips and individual files (circa version 10.0.5 or 10.0.6).
Now I have an Evernote notebook dedicated this problem and just from Google Searching, I have gathered 7 notes from different discussion forums dealindg with the same issue.
Some things that are common to us who are having problems:
1) we deal with big files (for long shoots)
2) we either use Canon 5DMIII or mix and match different types of codecs / wrappers.
3) we end up wasting so much time because Apple support is not paying attention.
4) or maybe we don't know how to get support from Apple. I know this isn't a forum where an Apple employee checks. Where can we directly contact Apple about this?

For the 5D clips, copy ONLY the .mov files into a folder on your external drive or wherever else you want to put them and import from there. You can safely ignore the .thm files and other stuff. Pretty easy and you also will have an archive of your clips. For the Panasonic files, copy ALL the contents of the card and use import from camera.
If you want to import from the card to an event - with the 5D at least - you can use a card reader. Don't use the camera itself. It does work but it is slow and cumbersome and card readers are cheap.
Create an event, hit import from camera and the card should show up.
Sorry, not familiar with the Panasonics but some of the other guys at work use P2 cards and I have imported from them a couple of times with no problem using both a P2 card reader and importing directly from the camera via firewire.
I use the previously mentioned method with all my Canon files - 5D2, 5D3, 60D and 7D - and have never had a single problem.
Hope this helps.

Microsoft office 2013 encountered an error during setup in Window 8.1

Initially, I got microsoft office 2013 64bit standard version installed in window 8.1. However, it suddenly got errors when opening office, and closed the program automatically. Therefore, I uninstalled it, and tried to re-install office.
However, I got the error "microsoft office 2013 encountered an error during setup" everytime when I try to install it.
I tried 32-bit and 64 bit version, and tried to install in clean boot, deleted registry, and modified the folder name "Microsoft Help", but none of them works.

Make sure you completely uninstall previous versions of Office. There may be remnants left behind, even after you uninstall Office using the normal procedure. I recommend using the “Fix It” utility to uninstall Office 2013 completely. Please refer to this
article: http://support.microsoft.com/kb/2739501/en-us you might also follow the manual steps provided on the same page.
If you still having problems, re-registering the Windows Installer and checking permissions on the %TEMP% folder and the C:\Windows\Installer folder to make sure you have full-control. To re-register the Windows Installer run the following commands:
msiexec /unregister
msiexec /register

Microsoft sharepoint foundation 2010 encountered an error during setup. One or more required Office components failed to complete successfully

Dear
I need yourhelp, I am installing Sharepoint foundation 2010 prerequisites OK,
then to finish the installation get the following message"microsoft
sharepoint foundation 2010 Encountered an error during setup. One or more required components failed to Office complete successfully"
Operating System: Windows Server 2012R2
Prerequisites: OK
SharepointFoundation 2010sp2
Many thanksforyour help
part of LOG:
01/16/2015 00:37:11 1 INF Searching for registry key Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS\CentralAdministrationURL
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.RegistryHelper
01/16/2015 00:37:11 1 INF The RegistryHelper has the key name as Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS and the registry hive as LocalMachine
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.RegistryHelper
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.GetStringValue
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.GetValue
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.GetValue
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.GetStringValue
01/16/2015 00:37:11 1 INF The central admin registry name CentralAdministrationURL at HKEY_LOCAL_MACHINE\Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS could not be found. This means that either
the server is not joined to a farm or a central admin site has not been created in the farm yet.
01/16/2015 00:37:11 1 INF Entering function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Resource id to be retrieved is CantOpenCentralAdminSiteNotExists for language English (United States)
01/16/2015 00:37:11 1 INF Resource retrieved id CantOpenCentralAdminSiteNotExists is Cannot browse to the SharePoint Central Administration Web Application because a SharePoint Central Administration Web
Application has not been created yet. To create one, use the SharePoint Products Configuration Wizard. Do you want to launch the configuration wizard now?
01/16/2015 00:37:11 1 INF Leaving function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Entering function PsconfigMessageBox.ShowMessageBox
01/16/2015 00:37:11 1 INF Entering function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Resource id to be retrieved is Branding for language English (United States)
01/16/2015 00:37:11 1 INF Resource retrieved id Branding is SharePoint Products Configuration Wizard
01/16/2015 00:37:11 1 INF Leaving function StringResourceManager.GetResourceString
01/16/2015 00:37:23 1 INF Leaving function UserInterface.ShowCentralAdmin
01/16/2015 00:37:23 1 INF Leaving function UserInterface.WarmUp
01/16/2015 00:37:23 1 INF Entering function TaskDriver.Stop
01/16/2015 00:37:23 1 INF Entering function TaskDriver.OnTaskDriverStop
01/16/2015 00:37:23 1 INF Sending a task driver stop event: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType.stop,
01/16/2015 00:37:23 1 INF Entering function TaskDriverStateChange.Enter
01/16/2015 00:37:23 1 INF Acquiring the writer lock to change the state
01/16/2015 00:37:23 1 INF Current state of the task driver is neverrun. You want to change it to stoppedrunning
01/16/2015 00:37:23 1 INF Changed state of the task driver to neverrun
01/16/2015 00:37:23 1 INF Released the writer lock to change the state
01/16/2015 00:37:23 1 INF Leaving function TaskDriverStateChange.Enter
01/16/2015 00:37:23 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
01/16/2015 00:37:23 1 INF Entering function UserInterface.TaskDriverEventHandler
01/16/2015 00:37:23 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType stop, message
01/16/2015 00:37:23 1 INF There isn't a current visible user form or the current form is not handling events, so we will handle this task driver event
01/16/2015 00:37:23 1 INF Leaving function UserInterface.TaskDriverEventHandler
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.OnTaskDriverStop
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.Stop
01/16/2015 00:37:23 1 INF UnLocking the task driver for exclusive use while warming the driver up
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.WarmUp
01/16/2015 00:37:23 1 INF Entering function PsconfigApplicationContext.ClosePsconfigApplication
01/16/2015 00:37:23 1 INF The psconfig ui application is closing
01/16/2015 00:37:23 1 INF We have do not have a main form, thus the application has been told to close prior to showing the ui at all
01/16/2015 00:37:23 1 INF Leaving function PsconfigApplicationContext.ClosePsconfigApplication
01/16/2015 00:37:23 1 INF Return code indicates a success
01/16/2015 00:37:23 1 INF Leaving function PsconfigUserInterfaceMain.Main

Hi Jose,
When server 2012 will not allow pre-requisite to run, due to the ASP.NET 3.5 or 4.5, do this:
Run, from admin command prompt:
Dism /online /enable-feature /featurename:NetFx3 /All /Source:<drive>:\sources\sxs /LimitAccess
you can read more here:
http://www.sharepointpapa.com/blog/_layouts/15/start.aspx#/Lists/Posts/Post.aspx?ID=86
Stacy www.sharepointpapa.com

Microsoft SharePoint Server 2010 encountered an error during setup. One or more required office components failed to complete successfully.

Hi,
I got the below error while installing share point 2010 on Windows 7 OS.
Microsoft SharePoint Server 2010 encountered an error during setup. One or more required office components failed to complete successfully.
Trouble shooted by following link as below
http://christopherborman.blogspot.in/2013/01/installing-sharepoint-2010-on-windows-7.html
But still i am facing the same issue.Please share your inputs to cross this issue.
Regards,
Sudheer
Thanks & Regards, Sudheer

Hi,
I selected Server Farm Mode,stand alone.
Post that installation went fine.
Regards,
Sudheer
Thanks & Regards, Sudheer

"Microsoft Office Professional Plus 2013 encountered an error during setup."

"Microsoft Office Professional Plus 2013 encountered an error during setup."
Can anyone help me?

Hi,
Please first make sure you have completely uninstalled previous installed version of Office. We can use Fix it tool in the following KB article:
http://support.microsoft.com/kb/971179/en-us
http://support.microsoft.com/kb/2739501/en-us
Also try to disable all your security programs when you try installing Microsoft Office.
In addition, please check the following link and try the method descrbed to check if it helps:
http://www.rushinformation.com/microsoft-office-professional-plus-2013-encountered-an-error-during-setup-fixed/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

Microsoft office professional 2013 encountered an error during setup

Trying to install the 32 bit version of Office 2013. Planning to keep all my old versions. I have Access 2002 and 2003 that I need. Was not installing Outlook 2013 as Outlook 2010 is the only Office app that I care if I have issues with
and my IT dept controls a a bit more. Getting the error "microsoft office professional 2013 encountered an error during setup" with no other info. I have Windows 7, full admin rights, and closed all other Office apps. I Just did a restart
which also installed all current Windows patches. Got the same error.
Any ideas or where to look for the cause?

I am having the same problem and am dead in the water.
Just in case one of the suggestions might have worked, I went through all of those above with no luck. At first the issue was that the preview version of the OSE was left behind by the uninstall, but I replaced it with the 2010 version, no dice.
I then uninstalled all office products to get the OSE uninstalled, and setup now gets beyond that hangup, but still fails. Following is the section of the log with the errors (MS email me for the full log):
2012/11/07 15:38:25:897::[5980] MSI(ACTIONSTART): 'Action 15:38:25: PublishProduct. Publishing product information'
2012/11/07 15:38:25:897::[5980] MSI(INFO): 'Action start 15:38:25: PublishProduct.'
2012/11/07 15:38:25:901::[5980] MSI(INFO): 'Action ended 15:38:25: PublishProduct. Return value 1.'
2012/11/07 15:38:25:901::[5980] MSI(ACTIONSTART): 'Action 15:38:25: InstallExecute. '
2012/11/07 15:38:25:901::[5980] MSI(INFO): 'Action start 15:38:25: InstallExecute.'
2012/11/07 15:38:25:921::[5980] MSI(COMMONDATA): 'Message type: 0, Argument: 1033'
2012/11/07 15:38:25:921::[5980] MSI(COMMONDATA): 'Message type: 1, Argument: Microsoft Office Shared 64-bit MUI (English) 2013'
2012/11/07 15:38:25:922::[5980] MSI(ACTIONSTART): 'Action 15:38:25: AllocateRegistrySpace. Allocating registry space'
2012/11/07 15:38:25:923::[5980] MSI(ACTIONSTART): 'Action 15:38:25: ProcessComponents. Updating component registration'
2012/11/07 15:38:25:934::[5980] MSI(ACTIONSTART): 'Action 15:38:25: CAOSMRegisterLogonTaskRollback.x64.1033. '
2012/11/07 15:38:25:935::[5980] MSI(ACTIONSTART): 'Action 15:38:25: CAOSMRegisterFallBackTaskRollback.x64.1033. '
2012/11/07 15:38:25:937::[5980] MSI(ACTIONSTART): 'Action 15:38:25: RemoveODBC. Removing ODBC components'
2012/11/07 15:38:25:937::[5980] MSI(ACTIONSTART): 'Action 15:38:25: InstallFiles. Copying new files'
2012/11/07 15:38:26:142::[5980] MSI(ACTIONSTART): 'Action 15:38:26: CAOSMRegisterLogonTask.x64.1033. '
2012/11/07 15:38:26:247::[5980] MSI(INFO): 'CAQuietExec: ERROR: The system cannot find the file specified.'
2012/11/07 15:38:26:247::[5980] MSI(INFO): 'CAQuietExec: '
2012/11/07 15:38:26:248::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: Command line returned an error.'
2012/11/07 15:38:26:249::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: CAQuietExec Failed'
2012/11/07 15:38:26:250::[5980] MSI(INFO): 'CustomAction CAOSMRegisterLogonTask.x64.1033 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)'
2012/11/07 15:38:26:253::[5980] MSI(INFO): 'Action ended 15:38:26: InstallExecute. Return value 3.'
2012/11/07 15:38:26:322::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 0'
2012/11/07 15:38:26:323::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 0'
2012/11/07 15:38:26:324::[5980] MSI(COMMONDATA): 'Message type: 0, Argument: 1033'
2012/11/07 15:38:26:324::[5980] MSI(COMMONDATA): 'Message type: 1, Argument: Microsoft Office Shared 64-bit MUI (English) 2013'
2012/11/07 15:38:26:325::[5980] MSI(ACTIONSTART): 'Action 15:38:26: Rollback. Rolling back action:'
2012/11/07 15:38:26:325::[5980] Log level changed from: Standard to: Verbose
2012/11/07 15:38:26:465::[5980] MSI(INFO): 'CAQuietExec: ERROR: The system cannot find the file specified.'
2012/11/07 15:38:26:466::[5980] MSI(INFO): 'CAQuietExec: '
2012/11/07 15:38:26:467::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: Command line returned an error.'
2012/11/07 15:38:26:468::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: CAQuietExec Failed'
2012/11/07 15:38:26:469::[5980] MSI(INFO): 'CustomAction CAOSMRegisterFallBackTaskRollback.x64.1033 returned actual error code 1603 but will be translated to success due to continue marking'
2012/11/07 15:38:26:524::[5980] MSI(INFO): 'CAQuietExec: ERROR: The system cannot find the file specified.'
2012/11/07 15:38:26:525::[5980] MSI(INFO): 'CAQuietExec: '
2012/11/07 15:38:26:526::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: Command line returned an error.'
2012/11/07 15:38:26:527::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: CAQuietExec Failed'
2012/11/07 15:38:26:527::[5980] MSI(INFO): 'CustomAction CAOSMRegisterLogonTaskRollback.x64.1033 returned actual error code 1603 but will be translated to success due to continue marking'
2012/11/07 15:38:26:537::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 1'
2012/11/07 15:38:26:542::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 1'
2012/11/07 15:38:26:546::[5980] MSI(INFO): 'Action ended 15:38:26: INSTALL. Return value 3.'
-Ingram

Microsoft Office 2010 encountered an error during setup: With No error codes/

Hello Everybody.
I am trying to deploy Office 2010 on a windows 7 Machine.. This machine has more then what it needs for hardware to run the software so I know it is not hardware related. At the end of the Install the installers hestiates and begins rolling back and finally
providing "Microsoft Office 2010 encountered an error during setup:" but does not provide any error codes what so ever.
I have tried upgrading, Fresh installs, side by side installs, Safe mode, Clean boot, Local admin accounts and other domain accounts. I have also tried numerous so called "fixes" but still get nothing. Sadly after the 2010 install fails 2007 no longer works
so each attempt is abit time consuming. Any Ideas out there that might solve issue ?

Hi,
First try uninstalling all your Addins include connector to test the result.
If not help, try the following steps:
1) Create a new administrator account.
2) Log on and launch the installer.
If things don't quite work perfectly now:
3) If you receive errors accessing your ProgramData folder, use the TakeOwnership registry hack to take control of the entire ProgramData folder, and if needed, create a "Microsoft Office"
folder with "Microsoft Office 2010 Tools" inside it under %programdata%\Microsoft\Windows\Start Menu.
4) Your error may return at the end of the installation, but don't worry, it's finished and Office is now installed. Switch user (don't log off!) and go back to your own user. Double-check
that everything works. Now, to turn off your computer, press and hold the power button for five seconds. This will force the computer to shut down instantly, which will close the installer with the error without giving it the opportunity to roll back its changes.
Sincerely,
Harry

Why is it when i update my status on facebook from iohone it splits the updates into two differents boxes with some funky symbol. I have uninstall facebook and installed it over and it still does it. only the facebook IPHONE app.

why is it when i update my status on facebook from iphone it splits the updates into two differents boxes with some funky symbols at the beginning.. I have uninstall facebook and installed it over and it still does it. only the facebook IPHONE app where it says to update staus text to FBOOK i have already update my phone too.
if i go on the facebook site and update there through a brower on iphone it will work fine just cant us IPHONE mobile upload, . But its a pain of not using my IPHONE APP for facebook cause it does that.

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

When saving iDVD to disk image the following message appears: "Error during rendering/codification. There was an error during rendering/codification of menus/slide presentation. The recording process was canceled.

When saving iDVD to disk image the following message appears: "Error during rendering/codification. There was an error during rendering/codification of menus/slide presentation. The recording process was canceled.
What am I doing wrong?

Read and answer the questions posted by Bengt Wärleby in this thread: Cant burn my idvd project to...: Apple Support Communities
OT

Microsoft SharePoint Server 2013 encountered an error during setup

(the html editor over here is a pain you know where - not even bold text is working...)
Every time I try to install SP 2013 SP1 on my WS 2012 R2 Update virtual machine the installer dies.
NOTE: I can reproduce this any time. Both the SharePoint 2013 (including SP1) .iso as well as the WS 2012 R2 (including Update) .iso are fresh copies out of the MSDN library.
The installation fails where the installer tries to install the binaries. No configuration wizard yet. I made sure all the prerequisites are there. The PreRequisitesInstaller.exe reboots the virtual machine several times (twice) and then it is all set.
PS C:\Users\bsom> add-windowsfeature net-wcf-http-activation45, net-wcf-tcp-activation45,net-wcf-pipe-activation45
Success Restart Needed Exit Code Feature Result
True No NoChangeNeeded {}
PS C:\Users\rsom> Add-WindowsFeature Net-Framework-Features,Web-Server,Web-WebServer,Web-Common-Http,Web-Static-Content,
Web-Default-Doc,Web-Dir-Browsing,Web-Http-Errors,Web-App-Dev,Web-Asp-Net,Web-Net-Ext,Web-ISAPI-Ext,Web-ISAPI-Filter,Web-
Health,Web-Http-Logging,Web-Log-Libraries,Web-Request-Monitor,Web-Http-Tracing,Web-Security,Web-Basic-Auth,Web-Windows-A
uth,Web-Filtering,Web-Digest-Auth,Web-Performance,Web-Stat-Compression,Web-Dyn-Compression,Web-Mgmt-Tools,Web-Mgmt-Conso
le,Web-Mgmt-Compat,Web-Metabase,Application-Server,AS-Web-Support,AS-TCP-Port-Sharing,AS-WAS-Support, AS-HTTP-Activation
,AS-TCP-Activation,AS-Named-Pipes,AS-Net-Framework,WAS,WAS-Process-Model,WAS-NET-Environment,WAS-Config-APIs,Web-Lgcy-Sc
ripting,Windows-Identity-Foundation,Server-Media-Foundation,Xps-Viewer
Success Restart Needed Exit Code Feature Result
True No NoChangeNeeded {}
PS C:\Users\bsom>
UPDATE: I had a quick look at %Temp%\SharePoint Server Setup(20140513...).log
2014/05/13 20:30:40:858::[2344] Log level changed from: Verbose to: Standard
2014/05/13 20:30:40:858::[2344] Error: Failed to install product: D:\global\oserver.MSI ErrorCode: 1603(0x643).
2014/05/13 20:30:40:858::[2344] Log level changed from: Standard to: Verbose
2014/05/13 20:30:40:858::[2344] Rolling back chain
Any ideas?
UPDATE: Installing office prior to the sharepoint installation had no effect (solution was suggested here).
UPDATE: Installing all windows updates (for Windows Server and Office client applications) didn't help either... same error.
UPDATE: I made sure my windows server and sharepoint server images are exactly those you can currently find on MSDN. SHA1 hashes match.

I just did a Server 2012 R2 and SP 2013 w/ SP1 install the other night on Hyper-V running on 8.1 Pro without issues. ISO was from MSDN.
Have you run a crc (or md5, forget what is used) to validate the ISO matches what MSDN says it should be?
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Duet has encountered an error during Approve , Reject Reassign the workflow

Hi,
We have implemented DUET with two scenario (LEMA & WOMA) in our organization. When try Approve , Reject or Reassign the Duet work flow Item Duet has encountered an error . The scenario was working fine earlier. Suddenly the error has start coming. The error is coming in a pop up window. I am attaching the error details from event log.
Event Type:     Error
Event Source:     Duet Diagnostics
Event Category:     None
Event ID:     0
Date:          1/04/2010
Time:          10:49:37 AM
User:          N/A
Computer:     xxxxxxxxxxx001
Description:
Error in Approve/Reject from Approver Mail.
Exception message: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Method: Close
StackTrace:   at Microsoft.Office.Interop.Outlook._MailItem.Close(OlInspectorClose SaveMode)
   at SAP.Office.Apps.Leave.Outlook.LeaveApproverMailInspectorCodeBehind.AfterOnSelectControl(String name, String param)
     =====Additional Information=====
oba://oba.microsoft.com/outlook?boundItemId=
Bound Item ID:
Bound Item Type:
Correlation ID:
Process Name: C:\PROGRA1\MICROS3\Office12\OUTLOOK.EXE
User Name: xx\99901
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Thanks in advance,
Monirul Islam

HI Monirul,
You can get better advice and help in another forum dedicated to Duet only.
Regards,
Sangvir

Dynamiclinkmediaserver has encountered an error while importing video

I deinstalled everything adobe, ran the cleaner tool, cleaned the registry, trashed preferences... re-installed PhotoshopCC
Still this error pops up everytime I try to import a video, I found posts about it dating from LR4.1 with not a single thread leading to a solution.
SO, how do I fix this anoying issue that prevent me from doing with photoshop what I bought photoshop for (cinemagraph gif).
complete error text is:
dynamiclinkmediaserver has encountered an error
[..\..\Src\DirectoryRegistry.cpp-283]

silverboxmedia wrote:
ANYONE have any fracking suggestions??
I don't know how to fix the problem in a proper fashion, which probably involves tweaking the video subsystem of your computer, since Lr is essentially tapping it for all that is video (assuming the mov files really should be importable, but aren't).
That said, a possible work-around for the mean time is to use a a script called
'Import Any Video'
free by me downloadable here:
http://www.robcole.com/Rob/ProductsAndServices/MiscLrScripts
it transcodes mov files into mp4 format which Lr tends to be happier with - dunno if it'll work for you.
Good luck,
Rob

When signing into FaceTime on my laptop it says the receiver encountered an error during registration. help please

When i try to sign into my facetime on my macbook pro it always comes up with a little red message saying that the server encountered an error processing registration. please try again later. how can i fix this and use my facetime?

Hi,
As the Other threads suggests I would check the Date and Time settings on the Mac and compare that with the settings in the router.
Messages (and iChat before that) send Time stamped info to Login and to send IMs.
Obviously most people set their Macs to their Time Zone and nearest city/town.
What people sometimes forget is that their Router/Modem device(s) have to be set correctly as well.
EDIT
Also Add a Public DNS server to your System Preferences> Network > Advanced Button > DNS tab
A Google one such as 8.8.4.4 or 8.8.8.8 seem to work well for most people
10:15 PM Saturday; March 17, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously
Message was edited by: Ralph Johns (UK)

Why do i getThe following clip encountered an error during import and is still referencing media on the camera:

Similar Messages

Maybe you are looking for