Why do I have black flashes in some crossover fade transitions

I made a video using a song and beat markers and photographs. There are about 30 photographs in 14 seconds of song. I used crossover fade transitions between every pair of photographs (replacing fade to black transitions) and when I play the video there are black flashes of very short duration between some of the photographs (four of them I think). Why would that happen and what can I do to get rid of them?

If you are ripping "standard" format content (4x3 ratio) then it will just appear like that on a widescreen TV. You shouldn't have that problem if you're ripping widescreen content (16x9 ratio).

Similar Messages

HT1351 Why do I have ! next to some of my songs and they dont sync?

Why do I have ! next to some of my songs and they dont sync?

I am not an expert but here's my two cents:
The exclamation point means itunes cannot find the music file in order to play it. There are several possible reasons for this, including but not limited to changing the name or location of your music library/songs, or storing them on an external hard drive or device that is not currently attached. The solutions for these are different so let me know if any of these apply and we can troubleshoot.

Why do I have a flashing white line of pixels across the middle of my screen?

My Ipod Touch 4 Gen has a small line of off coulour pixels mid way down the screen and after a while this line stretches across the screen and the whole screen flickers.
Is this a hardware issue or is it part of the notorious graphical glitches present in IOS 4, so to solve this I tried upgrading to IOS 5 this did not help.
Hopefully you can help me.
Thanks.

Since iOS 5 did not solve the problem I conclude it is a hardware problem. I would make an appointment at the Genius Bar of an Apple store.

Why do you use Adobe Flash?

I really just don't know a whole lot about Flash and so I'm curious why you each individually chose Flash over some other program. What kinds of things do you use it for?

I've been using since September 2004 and I've been happy with it most of the time. Mostly because of the reason given above: fast package manager, stays out of my face, lets me handle stuff myself, easy to make your own packages, ...
But lately my wishes / demands regarding a distro have changed: I don't have time anymore to do everything myself, nor to fix a borked system after a pacman -Syu. That's why I switched to Ubuntu on my company's laptop: stuff just has to work, I don't need the bleeding edge anymore. Mind you I didn't install vanilla Ubuntu: I used the alternate install CD and installed a "CLI system". This is very much like Arch: you end up with a minimal base system and you can decide for yourself where to go from there. So far I've been very pleased about Ubuntu.
I still use Arch on my desktop and router. Although maybe I've become more of a Frugalware stable type of user, I can't let go of Arch as it's tought me a lot about Linux.

Black background in some dialog boxes

I have Windows XP SP3 on my MacBook Pro.
One Program shows up with some dialogboxes
that have black backgound and some white text,
but not all text is white some text stays black.
And black text on blach ground is not good to read
Already tried the latest nvidia driver from nvidia,
but the dialog stays black.
Is there a solution for this problem somewhere?

The black background just appears on the MacBook dialog-boxes
of this program, under bootcamp or under parallels.
Here is a demo of this program:
<http://www.orca-software.com/content/orca/index-dateien/data/Projekt1/Item830/F orm1321.htm>
On several other PCs it works fine.
Is there somebody who also had black backgrounds in dialog-boxes?

Why do I have to click on all of my flash components before I can navigate?

Without modification to the code...the component is there but
it needs to be clicked on before I can navigate the site. Should
Dreaweaver not know how to properly insert the code necessary allow
the flash component to view properly? What am I missing? I know
this is a Deramweaver forum....but the problem does not not seem to
be with Flash, it seems to be in the code that Dreamweaver creates
when the Flash component is inserted.
I have been able to find a work around to my problem but
surely it is not what everyone out there is doing. If
so...Dreamweaver or Flash has a serious bug!
I created a site a while back and everthing worked fine. So I
copied some code from that site to fix the new one. However even
after copying the code I still have to modify it to make it
work..(the modifcations are obvious.) This is suely not the way it
is done all the time.
I have three questions:
1. Why did everything work fine with the first site with no
modifications?
2. Why do I have to copy the code to the other site after
inserting the Flash component?
3. Why does dreamweaver not do it for me? (it did everything
right the other time, but now it doen't even work in the previous
site)
I feel like I must have changed a setting somewwhere that I
did not realize would effect this...Perhaps it is a Dreamwweaver
thing.
PLEASE HELP!

It's IE-only behaviour as a result of changes Microsoft made
several
years ago to their browser, regarding how Active Content
(Flash, Quicktime
etc)
is handled, after losing a high profile court case.
http://blog.deconcept.com/2005/12/15/internet-explorer-eolas-changes-and-the-flash-plugin/
Background:
http://en.wikipedia.org/wiki/Eolas
See also
http://www.adobe.com/devnet/activecontent/
If you're running Dreamweaver 8.0.2/CS3, the fix is already
built into DW's
interface.
If not, try
http://blog.deconcept.com/swfobject/
If you want to use Flash for navigation, consider this -
1. Some people don't have Flash installed - what do they do?
2. Search engines don't parse Flash links - your site will
not be spidered
3. Screen assistive devices don't parse Flash links - what
will those users
do?
4. DW cannot maintain links within a Flash movie, so if you
move or rename
a linked file, your navigation will break - what will you do?
It's usually a very bad idea for these reasons...
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"South Beach" <[email protected]> wrote in
message
news:[email protected]...
> Without modification to the code...the component is
there but it needs to
> be
> clicked on before I can navigate the site. Should
Dreaweaver not know how
> to
> properly insert the code necessary allow the flash
component to view
> properly?
> What am I missing?
>
> I have been able to find a work around to my problem but
surely it is not
> what
> everyone out there is doing. If so...Dreamweaver or
Flash has a serious
> bug!
>
> I created a site a while back and everthing worked fine.
So I copied some
> code from that site to fix the new one. However even
after copying the
> code I
> still have to modify it to make it work..(the
modifcations are obvious.)
> This
> is suely not the way it is done all the time.
>
> I have three questions:
> 1. Why did everything work fine with the first site with
no
> modifications?
> 2. Why do I have to copy the code to the other site
after inserting the
> Flash
> component?
> 3. Why does dreamweaver not do it for me? (it did
everything right the
> other
> time, but now it doen't even work in the previous site)
>
> I feel like I must have changed a setting somewwhere
that I did not
> realize
> would effect this...Perhaps it is a Dreamwweaver thing.
>
> PLEASE HELP!
>

Why my notebook sometimes blacks out, in Windows 7, when I watch video online or just browse some web pages which contains quite a lot pictures?

Why my notebook sometimes blacks out, in windows 7, when I watch video online or just browse some web pages which contains quite a lot pictures?
1. I am not sure whether it is the problem of the graphic hardware, relevant softwares or the system itself.
2. I am not sure whether browsing a webpage with a lot pictures would make the graphic hardware, or other hardwares if possible, massively burdened and then just crash.
3. Or if possible, is the reason that the heat dissipation doesn't work well?
I am looking forward to any replies that might be helpful. Really appreciated.

it could be heat, not enough RAM, but you don't tell us enough.
There is no reason to assume this is anything other than running Windows natively btw.
Browser of course matters probably the most.
I like IE10 now, but use to use FF until recently. I'd like Chrome except for a few concerns I have over using it, it can eat up a lot of RAM and it builds up HUGE disk cache if you don't clear history and cache on exit and run CCleaner regularly ( good for all browsers )
So assuming 64-bit and 4GB or more and core i5 or better...
Also make sure Wiindow has 10GB of free space or more.
Biggest concern is what happens afterwards and whether you have run a check of your hard drive (chkdsk on startup) or if the problem cascades and gets progressively worse on top of the first - like do you have to do hard restart or able to bring up Task Mgr and kill or better yet, Resource Mgr and see if you have any thread locks.
Safari is not well versed in multithreading and handling what you want to do and are doing. IE9 isi usually good but I found it could not handle a lot of tumblr photo streams and sites. Try Chrome. With Firefox, use noscript, blashblock and see how it goes.

Why does mac have to download adobe flash player to view videos

why does mac have to download adobe flash player to view video clips?

If you have a new-ish Mac or one you just upgraded to Mac OS X Lion, Adobe Flash Player is not installed by default. Since some web content is created specifically to be seen only with Adobe Flash Player, if you want to see that content, you need to install it.
It's trivial to do so. Start here:
http://get.adobe.com/flashplayer/

I have an iphone 4s why does it have a black screen instead of my background picture when I get a text message?

I have an iphone 4S why does it have a black screen instead of my background picture when I get a text message?

When you see the old number come up in the suggested choices look for a blue arrow to the right of the Contact. Tap the blue arrow and then tap Remove from Recents.

I have a iMac version 10.6.8 and used to have adobe flash player my laptop requires me to download the latest version of the player but warns me that there is a "risk" downloading from the internet. Anyone else experienced this and may have some solutions

I have a iMac version 10.6.8 and used to have adobe flash player my laptop requires me to download the latest version of the player but warns me that there is a "risk" downloading from the internet. Anyone else experienced this and may have some solutions

Install it directly from Adobe. Ensure that you use the uninstaller before installing.

What is flash player and why do i have to download it ?

My computer won't show any videos on safari because it says I need to update flash player. What is flash player and why do i have to download it? I thought flash player comes with your computer.

1. A browser plugin for Flash content.
2. Apple no longer bundles it with Mac OS X.
(119030)

Why does my Apple TV have to frequently reactivate some channels

Why does my Apple TV have to frequently reactivate some channels, such as HBO Go and PBS and several others that I know were already activated.

Maybe a software update reset something, maybe the broadcasters require this at intervals, could someone have logged/signed out? Sorry don't get those channels in UK, but once Netflix made me log in again, others seem ok.
You could send some feedback if this happens very often:
Apple - Apple TV - Feedback

Why do I have to download flash player, 3-4 times a week?

Why do I have to download flash player, 3-4 times a week to play my games?

Flash Player Help | Installation problems | Mac OS
Flash Player Help | Installation problems | Windows
Mylenium

Okay so i have been trying to contact apple for days now but i was just thinking why do we have to only choose between white or black for the digitizer? would i be able to send my ipod into apple to get it customized to a different color besides that?

okay so i have been trying to contact apple for days now but i was just thinking why do we have to only choose between white or black for the digitizer? would i be able to send my ipod into apple to get it customized to a different color besides that?

Apple does not offer custom colors. I'd suggest you get a skin for your iPod. Those are available in hundreds of colors and patterns and since they're not permanent, they don't affect the iPod's warranty and you can change if you ever get tired of the skin you chose.
Regards.

Why do I have to keep installing adobe flash on my mac

why do I have to keep installing adobe flash on my mac?

You can check here what version of Flash player you actually have installed: http://kb2.adobe.com/cps/155/tn_15507.html
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser, but check this also:
http://support.apple.com/kb/HT5655?viewlocale=en_US&locale=en_US which also covers ‘blocked plug-in’.

Why do I have black flashes in some crossover fade transitions

Similar Messages

Maybe you are looking for