Why do i have more than one "Sites" cert after updateing and expired cert.Can i delete the expired cert?????

Hi After getting the below message i updated my cert but now have 3 of the same certs? Can i delete the expired cert?????
There is no valid SMTP Transport Layer Security (TLS) certificate for the FQDN of SERVER.domainname.local. The existing certificate for that FQDN has expired. The continued use of that FQDN will cause mail flow problems. A new certificate that contains the
FQDN of SERVER.domainname.local should be installed on this server as soon as possible. You can create a new certificate by using the New-ExchangeCertificate task.
I used "Get-ExchangeCertificate | Select CertificateDomains,Thumbprint,Status,Services | fl"
to see which cert was expired
I used "Get-ExchangeCertificate –Thumbprint 91D4C277BE4DF5FA15FC76D936375B7766ABCC23 | New-ExchangeCertificate" to replace the expired cert
I re-ran "Get-ExchangeCertificate | Select CertificateDomains,Thumbprint,Status,Services | fl"
to see if it had worked
but now i have two certs one expired the other not. Can i delete the expired cert?????

Hi 
Yes you can delete the expired certificate which are showing  as it is not functional anymore and they remain as stale entries 
You can use  below command
Remove-ExchangeCertificate -Thumbprint "specify the value "
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Similar Messages

  • I want to run a streaming quotes program on Scottrade. They tell me that their product does not work if I have more than one Java application on my Mac. How do I delete the older versions? Thanks

    I want to run a streaming quotes program on Scottrade. They tell me that their product does not work if I have more than one Java application on my Mac. How do I delete the older versions? Thanks

    I have the same problem, they never told me that, just that the newest version of Java "locks" up streaming quotes.

  • Why cant i have more than one movie at a time

    why cant i have more than one movie at one time

    It may be how much space is available on your iPad. The average movie is around 2.5 gigabytes. If you reach your space limit then you can't download anything until you clear space.

  • Can I have more than one home page so that both would open upon connecting to the internet?

    On my desktop I can have more than one home page so that they all load when I connect to the internet.
    On my laptop, I cannot figure out if or how I can add a second home page. Is it possible to have more than one home page on my laptop?

    Firefox can have more than one homepage. Multiple homepages are separated by the keyboard character "|".
    *See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • Can single site have more than one site navigation???? In WPC

    Hi,
    I am new to WPC, my doubt is can a single site contain more than one site navigation ( navigation.wpc) ??
    let me bit more clear....
    I created a site, created navigation nodes, created web pages and then published site navigation, copied the path from navigation.wpc, used that path in a worksets "external connections".
    Up to here every thing is clear and i did what I wanted.
    NOW,
    I want to create a new web page which will be part of above navigation path ( navigation.wpc).
    I create a web page under same site and used that navigation, and when i used this path in new workset, its again showing me previous content added new web page in detailed navigation of portal.
    I want this web page should be part of second level navigation which will not connect to previous one any where.
    at last my question is.... can I have more than one navigation paths under single site?
    Is it possible? if yes, How? give me steps...
    Thanks in Advance...
    PradeeP

    Hi there,
    I had the same problem and I THINK I found a way to fix it, try creating a Site inside another Site, this way:
    1. Create a New site in the "Sites" folder, let's call it "MyMainSite" (Web Content / Sites / MyMainSite).
    2. Open that new site "MyMainSite", there you will find 4 folders, right? Entry Points, Site Content, Site Navigation and Web Pages.
    3. Then click at "New" and choose "Site". Here you're creating a Sub-site inside your MainSite, got it? Name this site as "MySubSite"
    4. You'll find a 5th folder called "MySubSite", open it.
    5. So, you have again the same structure with the 4 folders (Entry Points, Site Content, Site Navigation and Web Pages) and when you create your nodes in the Site Navigation structure you will have a new "navigation.wpc" file, but with a different path.
    Technicly it's not very nice, but it works, right?
    I hope this helps
    Demis Estabridis

  • How do I create forms that people can complete in more than one sitting i.e. save and submit?

    Hi,
    I have just bought formscentral and need advice to achieve my objectives:
    Required:
    Customer can part fill form, save and complete later on and submit for us to capture the data.
    Customer can save or can access their completed form, as we need them to print it out, and physically sign a version for us for legal reasons
    Several different people within the customer's business need to fill out different areas of the form, so they may need to e-mail the form bwtween each other or each logon and complete their section.
    Are the above achievable? If so can I do as a web form or pdf? Are there any settings I need to apply to the form before or during creation? Are there only certain methods of distribution that will work?
    Other concerns:
    Our end customers are small traders that are not that computer literate and I worry that they won't have the latest adobe reader or the form won't be compatible with their Mac or firewalls etc and will struggle to be able to fill out, save and submit the forms for technical reasons. Are these concerns justified? If so, are there ways to minimise these issues?
    Any guidance is much appreciated. The package also mentions it includes one to one support from Adobe - how do I access this support?
    Thank you,
    Rob

    If a requirement is that the form be passed around to several users, I think that the PDF option is your only hope. It will indeed be a problem if users don't have Reader or some other forms-capable PDF viewer. You don't have to do anything special apart from enabling it with FormsCentral. This allows users with Reader versions prior to 11 to save the filled-in form. You'll just have to try to educate the users to use Reader (and NOT to use Preview on a Mac).

  • Can you use the same Apple ID on more than one MacBook Pro for updates and applications?

    We just got a few new MacBook Pro's and when I went to install updates it said I need to make an Apple ID.  Can you use the same Apple ID and email address for that Apple ID on multiple machines, or do I need them both to be unique per machine?  I'm not sure how that works when you have multiple machines.

    An Apple ID is a user name you use for everything you do with Apple. Creating an account for an Apple service, such as the iTunes Store or the App Store, creates an Apple ID. Apple ID allows you to access other Apple services.   So you can use the same Apple ID for up to 10 Macs associated with it.
    To create an Apple ID you need to enter  your full name and your primary email address as your Apple ID. This will be used as the contact email address for your account.

  • Why do I have more than one copy of a TV show on my Mac?

    +Hi everyone, this is my first ever post so go easy on me!+
    I bought an HD TV series via Apple TV. I noticed files were downloading to both Apple TV and my Mac as well - I expect this is normal. I started a sync to clear all but the 5 least recent unwatched HD episodes off the AppleTV as the whole series would not have fit on there. I left the files processing overnight but iTunes crashed at some point so I had to start the sync again. The second sync has now completed and I've got my 5 least recent unwatched episodes on AppleTV (episodes 3-7). So far so good...
    *Now, in iTunes I see that I have two copies of the HD versions of episodes 1,5,6,7,8,9 and 10.*
    *Will it be OK to delete these extra copies from my iTunes library?*
    *Did I do something daft getting it to Sync before all downloads were finished - if so, is there anything I could/should do differently?*
    Any guidance would be much appreciated.

    Welcome to the  Discussion Forums
    It won't be a problem if you delete your extra copies.
    I don't download very much to my tv, I do sometimes if I'm in bed but usually I do it from itunes. However if you have not fully downloaded something to the tv it is possible to start the download from itunes as well, you have likely activated 'check for downloads fin itunes in some way, could be by opening itunes, selecting 'check or downloads' from the advanced menu or that you simply have automatically check for downloads set in your prefs and it has checked coincidentally.

  • It is necessary for me to have more than one window open in Firefox, and the command (New Window) no longer works. How do I have two different websites open at the same time on separate displays?

    I used to be able to open two Firefox windows at a time, with one website on one display and another website on another display. Now when I select New Window, nothing happens.

    You can tear off a tab (right-click: Move to New Window) to open it in another window and resize both windows so you see them at the same time.
    *Fox Splitter: https://addons.mozilla.org/firefox/addon/fox-splitter/
    *Split Pannel: https://addons.mozilla.org/firefox/addon/split-pannel

  • Why does Boot Camp Assistant already think I have more than one partition on my hard drive?

    Greetings...
    I'm surprised I've found no remedy for this problem in my searches so far. My symptom is that when I run the Boot Camp Assistant app, I get the following error message:
    "The startup disk cannot be partitioned or restored to a single partition." The instructions that are provided along with the error message are: "Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
    When I try to follow the instructions, I see that Disk Utility shows my drive as having a single partition. Nevertheless, I've backed up my Macintosh HD volume, re-artitioned the drive into a single Mac OS Extended (Journaled) volume (once using the Snow Leopard Installation disk and once using Drive Genius 3), and restored my Macintosh HD volume. After all that, I still get the same error message. I even defragged my hard drive, which seems to have helped some users I've read about, but it hasn't helped me.
    Something worth noting is that I recently upgraded to a bigger internal hard drive, and before doing so, I deleted the Boot Camp volume. I innocently thought I'd just do a fresh install sometime after replacing the hard drive, but hindsight tells me that I might have fallen victim to my own ignorance.
    Is there a value stored in a register somewhere that's telling my OS that I have more than one partition when I really don't? Can someone out there help me do battle against my ignorance?
    I'd be grateful for any help that can be sent my way...

    I used DG3 to initialize the HD, which essentially erases the disk if I understand correctly. I haven't used Superduper before, so perhaps that's worth looking into.
    I did mentioned the use of DG3 to ensure that I had a single disk partition. I guess the restore from a clone or Time Machine was implied...
    ;o)
    Thanks for putting some effort into helping me. I'll look at Superduper and let you know if that gets me anywhere...

  • Why does Boot Camp think I have more than one partition on my hard drive?

    I'm surprised I'm finding no remedy for this problem in my searches so far. My symptom is that when I run the Boot Camp Assistant app, I get the following error message:
    "The startup disk cannot be partitioned or restored to a single partition." The instructions that are provided along with the error message are: "Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
    When I try to follow the instructions, I see that Disk Utility shows my drive as having a single partition. Nevertheless, I've backed up my Macintosh HD volume, re-artitioned the drive into a single Mac OS Extended (Journaled) volume (once using the Snow Leopard Installation disk and once using Drive Genius 3), and restored my Macintosh HD volume. After all that, I still get the same error message. I even defragged my hard drive, which seems to have helped some users I've read about, but it hasn't helped me.
    Something worth noting is that I recently upgraded to a bigger internal hard drive, and before doing so, I deleted the Boot Camp volume. I innocently thought I'd just do a fresh install sometime after replacing the hard drive, but hindsight tells me that I might have fallen victim to my own ignorance.
    Is there a value stored in a register somewhere that's telling my OS that I have more than one partition when I really don't? Can someone out there help me do battle against my ignorance?
    I'd be grateful for any help that can be sent my way...

    Your welcome and good luck finding the solution. BTW as a newbie you benefit from:
    Switch 101 & Mac 101.
    Also you may want to reassess to see if you really need Windows on your computer. Remember if you install it you have all the issues every Windows users has to deal with. When I switched almost 4  years ago I installed Windows too but now I only turn it on to see if it still works. Of course your situation is different you may have proprietary software only designed for Windows and have to have it installed.

  • Can we have more than one trusted system in Oracle Identity Manager?

    Can we have more than one trusted system in Oracle Identity Manager?

    Can we pull employee from one trusted system and in the same way can we pull some contractors from other trusted system simultaniously?
    yes you can. In the schedule task you'll have to put your query in such a way that it brings both data.
    Can both trusted systems can be active at the same time pulling two types of users from two trusted systems?
    You have to run both recon in sequential manner so that it can pull correct data for OIM
    Some where i read in doc that only one target system can be designated as trusted system if it as has more than one the recons will not work properly...
    I don't think that it results into issue. But we have to see the sequence mainly. Otherwise it will results into wrong data

  • Can we have more than one primary key constraint to a Oracle Table?

    Hi,
    Can we have more than one primary keys to a single table in oracle? ( Not the composite key)
    Please somebody answer..
    Regards,
    Alaka

    811935 wrote:
    Can we have more than one primary keys to a single table in oracle? ( Not the composite key)
    In principle a table can have multiple keys if you need them. It is a very strong convention that just one of those keys is designated to be "primary" but that's just a convention and it doesn't stop you implementing other keys as well.
    Oracle provides two uniqueness constraints for creating keys: the PRIMARY KEY constraint and the UNIQUE constraint. The PRIMARY KEY constraint can only be used once per table whereas the UNIQUE constraint can be used multiple times. Other than that the PRIMARY KEY and UNIQUE constraints serve the same function (always assuming the column(s) they are applied to are NOT NULL).

  • Why can´t i have more than one initiator task on my bpm process

    Hi All.
    I am working with BPM 11g and would like to know:
    Why can´t i have more than one initiator task on my bpm process
    In this case, i will have two separeted process where each has its initiator task?
    Regards,
    Diovani

    Hi Diovani
    Two different processes can have different task initiators...task initiator means creation of a process instance which can happen only once

  • Profiles - I have an iPad 1st gen, run iOS5 have have a Profile set up with Lotus Notes to get work email. I want to get a VPN so i can access blocked sites as I travel around the world. The VPN will install a new profile. Can I have more than one

    I have an iPad 1 and have a profile set up with Lotus Notes for work email.  As I travel around the world I want to install a VPN ( my companies uses a VPN but it is only for work)  so I can visit blocked sites.  When I install the VPN it want to change the profile.  Can I have more than one profile on the iPad or will the VPN overwrite the Lotus Notes profile?
    max

    Yes, you can have more than one profile installed.

Maybe you are looking for