Why do I have multiple SG24 modules which have lost their ability to supply an excitation voltage?

I have a number of systems using the SC-2345 Carrier and measuring load
cells (full bridge) using the SG24 module. I have had these fail
to supply a voltage after operation for a short (1-3 months, not
continuous use) period, replacing the module seems to fix the
problem. This problem has been recurring, is there an issue with
these modules. I am using these with various daq boards including
PCI-16XE and similar boards (dependent on calibration cycles).
Thanks for any insight or experiences others have had.

Hey icebar,
Thanks for contacting National Instruments. We are not aware of any quality issues with the SCC-SG24. The input range on these devices is -100mV to 100mV, with an overvoltage protection of 28VDC. Problems like yours are usually associated with large spikes that can damage the module, caused by ground loops and so on. More information about your setup would be helpful.
Let us know if you have further questions.
Regards,
Kenn North
Senior Product Manager - Search, Product Data
http://ni.com/search

Similar Messages

Why the images have missed their frame stroke, once online?

I am working on my new website on iweb 09, and published a test, it looks very nice.
The only thing I don´t understand is why the images have missed their frame stroke, once online.
What´s wrong, any idea?
On iWeb, Inspector/Graphic/Stroke/Picture Frame

It appears that the Scrips folder for you site has not been uploaded or not uploaded fully. There are two files, iWebImage.js and iWebSite.js. Try the following:
1 - do a File->Publish Entire Site and see if the site works as intended. You may have to do a refresh on the pages a couple of times.
2 - next, in needed, publish your site to a folder on your hard drive. Mount your iDisk and go to the iDisk/Web/Sites/arkimo folder. Drag the two files above from the Scripts folder on your computer into the Scripts folder on the iDisk Then try the site again.
Part of the problem is the server, some files not loading the first time, and part is the missing js files in the Scripts folder.

I have lost the ability to log into find my iPhone using my daughters iTunes login to track her while she's driving

I have lost the ability to track my daughters phone using her log in for find my iPhone since updat

Does she have her own iCloud account? You can have more than one iCloud account installed on a device, and some users install a secondary iCloud account which is common to others in the family to allow "Find My iPhone" to be used from one account while keeping separate iCloud contacts, mail, etc.
But with iOS 7 although you can still have multiple iCloud accounts installed, only the "primary" iCloud account supports "Find my iPhone". So if her iCloud account is the primary, you can no longer track her from your iCloud account. Is that what happened in your case?

Since updating to version 8.0.1 many websites have lost their identity icon.

In the address bar and Bookmarks a lot of web sites have lost their identity icon in Firefox 8.0.1 (which were there before). Holding the cursor over the icon area brings up a message saying 'this site does not supply identity information'. But this message also comes up when putting the cursor over one ''with'' an icon. Some sites have the icon in Bookmarks but it doesn't show in the address bar. I have found it does not happen on Vista laptop, only on Windows 7 desktop.

Hi. I think there are two different things going on here. The "identify information" message relates to something unrelated to the webicon. From what I can tell it has to do with digital signing. I had to do some browsing before I found a site that actually ''was'' signed: Google. When you go to Google you'll see the site name to the right of the webicon with the url afterward. Holding cursor over it shows google.com's signed by Thawte Consulting. Oddly enough, VeriSign is not...um...verified. The story on this one will be interesting.
As far as the webicon goes, if you provide links to a few sites that don't work I'd be glad to take a look. I haven't had the problem yet on Lion or Win 7 Pro, but that doesn't mean anything. It could be the way the icon is identified or its filetype: .ico and .png files can be used (maybe others) and there are different ways to identify them: link rel="shortcut icon" or "icon" and type="image/x-icon" or "image/png" if a png file's used. Could be 8.01 no longer recognizes one of these or incorrectly stated ones it was OK with in the earlier release. All guesses of course w/o having something to look into.

Folders in Business Area have lost their Owner

I have several Business Areas that have folders which have lost their Owner. I need to update the Owner to APPS in the business areas where the current owner is NULL. Can someone confirm that the only place I need to update the Owner for Discoverer Folders is eul4_ojbs.obj_ext_owner. Here is the SQL that I use to search for missing owners for folders from database tables:
SELECT
obj_id,
obj_type,
notm,
obj_name,
obj_ext_owner
FROM
eul_us.eul4_objs
WHERE
obj_id in (SELECT bol_obj_id
FROM eul_us.eul4_ba_obj_links
WHERE bol_ba_id IN
(SELECT ba_id
FROM eul_us.eul4_bas
WHERE ba_name LIKE '%Budget%') )
AND obj_type = 'SOBJ'
AND obj_ext_owner IS NULL

I opened a SR (5389569.992). The short answer to the cause of the problem is the EEX files provided as the Discoverer Upgrade file were all missing the Owner. In all the files that created folders there is an entry, ExternalObjectOwner="". This sets the owner in the folder to "". The fix is to create a script that replaces this string with ExternalObjectOwner="APPS" in all the EEX files in the folder. We had to hire a consultant to find this out.
Grant

I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan

Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

TS4268 Help! Probably you have never experienced this, but I have lost the ability to iMessage. When I try to turn on iMessage, it tells me that "an error occurred while trying to turn on iMessage." It's not a huge deal, but people with iPhones can't t

Help!
Probably you have never experienced this, but I have lost the ability to iMessage.
When I try to turn on iMessage, it tells me that "an error occurred while trying to turn on iMessage."
It's not a huge deal, but people with iPhones can't text me back unless they try to re-send after finding out that their message wasn't delivered.
Help!
I think I have gone through every support option available, short of
Scheduling an appointment at the Genius Bar. But I have been to the store three times in the last three weeks.
To solve a different problem, the folks at the store replaced my iPhone 4S.
I came home and loaded my backup onto the new phone. Everything EXCEPT iMessage seems to be working great.
I would really appreciate any feedback...

Help!
Probably you have never experienced this, but I have lost the ability to iMessage.
When I try to turn on iMessage, it tells me that "an error occurred while trying to turn on iMessage."
It's not a huge deal, but people with iPhones can't text me back unless they try to re-send after finding out that their message wasn't delivered.
Help!
I think I have gone through every support option available, short of
Scheduling an appointment at the Genius Bar. But I have been to the store three times in the last three weeks.
To solve a different problem, the folks at the store replaced my iPhone 4S.
I came home and loaded my backup onto the new phone. Everything EXCEPT iMessage seems to be working great.
I would really appreciate any feedback...

I seem to have lost the ability to close windows at the top of the screen. What do I click on to change the look of the tool bar.

I seem to have lost the ability to close a window at the top of the screen. I must have changed the tool bar in some way and I have no idea how to change it back. Any guidance?

Settings-general-show scrollbars-always.

I upgraded to v3.6.22 today and have lost the ability to ctrl-click a link to open the link in a new tab; how do I get this back?

I upgraded to v3.6.22 today and have lost the ability to ctrl-click a link to open the link in a new tab; how do I get this back?

Strangely enough, putting my laptop into Hibernate mode solved the problem. It didn't even take a reboot.
Running Windows Vista Enterprise SP2.

My iPhone 4S LCD screen is too bright,playing with brightness feature doesn't help.The colors have lost their vividness

My iPhone 4S LCD screen is too bright,playing with brightness feature doesn't help.The colors have lost their vividness

Definitly sounds like a physical issue with the phone. I suggest you go to your local Apple Store or Apple Authorized Service Provider for help.

Mp4 files have lost their quicktime icons!!

just noticed this and not sure when it happened
all my .mp4 files on all hard drives connected to my 10.4.9 G5 have lost their quicktime icons. they all open in quicktime just fine, but they do not automatically have the proper quicktime icons anymore. .mov files still have their icons
it's not an operational problem but I'd still like to solve it
only thing I can think of is that I upgraded my quicktime and itunes to the latest versions within the past couple of days.
I've repaired permissions and rebooted to no avail
has anyone seen this and know how to fix it?

Hi David,
Get Info on one of the affected files with the blank icon. Click on the icon in the Get Info window and press the Delete key. (not the Backspace key)
Provided that the default application to open .mp4 files is QuickTime player, the icon should change to the standard QT icon.
If this works, change all files of that type to open with the QuickTime Player by default. (unfortunately I'm at work, on a PC, and can't give you the button detail verbatim - working from memory now) That should reassociate the QT player with all .mp4 files, and thus assign the correct icon.
Hope this helps,
Steve

HT204291 I updated my apple tv to the latest firmware. I seem to have lost the ability to mirror my ipad 3rd gen. Can anybody help

I bought an apple tv for its ability to mirror any of the content on my new ipad 3rd gen. Now after updating my apple tv i seem to have lost the ability to mirror my tablet onto the screen. Can somebody help with this. I have tried to do everything. I made sure both my apple tv and my ipad are connected to the same network. I also made shure my bluetooth was off. I can still airplay with my brothers iphone 4s. ( ios5.1) but i cannot do the same with my tablet.

To U2SockMonkey,
You must be a newbie, because otherwise you would have fixed it. I don't have that mirroring problem and it must be because you are not looking around and inform yourself thoroughly. It took me also 2 days of grief before I found out how to do it. Not even to mention that the Apple Engineer that I called did not have a solution either and just suggested that I should send my Apple TV back or go to a Apple Store nearby.
I was pretty annoyed about that such a little black box was giving me grief. I have been working in the IT industry for over 30 years and I know quite a bit inside out about many hardware's. But my opinion is that sending out Version 6.0 Aka 5.1 as you rightfully say is not on with me.
This is the same behaviour that Apple now does as Microsoft forever is doing. Not finishing the products and putting it on the market or release it before it is finished and has bugs in it.
Personally this irks me and annoys me. Because I am in that field for many years and have seen what grief it causes. I have noticed that an Administrator has removed another post that I made about other matters concerning iPads and especially with iPad 3 and 4 now and that there are also other people who make inflamatory remarks to people ( Julian Wright for e.g.) about how they have to spend their money for the latest stuff of Apple and come over very aggressive, selfish, if not evil.
For your information, I used to work for Apple, I know Apple inside and how they work and what they used to do ? They were really nice for their employees and customers. But I think that has changed now for whatever reason they have. Very disappointing. It's up to Apple not to listen, I have no control of that, but it will cost them at some point.
Besides that point, I feel that some people are been taken for a ride and when I am expressing that this is not OK I should be rewarded for that instead of being rejected.

I just downloaded Photos and I have lost the ability to easily send photos by email via Outlook. Any suggestions?

I just downloaded Photos and I have lost the ability to easily send photos by email via Outlook. Any suggestions?

If you use Mac Mail and Microsoft Outlook mail like I do, you could switch from one to the other mail program for send photos.
iPhoto >> Preferences >> General tab >> E-mail foto's via >> select Microsoft Outlook.
Click a photo in iPhoto >> Share >> select E-mail … >> Microsoft Outlook will be launch.

I seem to have lost the ability to directly upload a song from Garageband to facebook or e-mail on both my iMac and Macbook. Any suggestions.

I seem to have lost the ability to directly upload a song from Garageband to facebook or e-mail on both my iMac and Macbook. Any suggestions?

Have you repaired permissions and restarted your computer after installing ML? Checked your printer settings in System Preferences?
If Software Update does not list any updated drivers for your model printer, you should go to the printer's manufacturer website and download the drivers from there and/or contact their tech support to determine if your printer is compatible w/ML.
Read the various Knowledge Base ML printing articles. Here are a few to get you started:
OS X Mountain Lion: If the software for your printer can’t be found
OS X Mountain Lion: Troubleshoot a USB printer
OS X Mountain Lion: Troubleshoot an AirPort printer
If none of the above work, post back w/the model of your printer and how it's connected to your computer. USB? Wireless?

Recently I Have lost the ability to hear the sound in some news, youtube, videos. THE Sound works on my IPAD, but not for some videos. Why is this?

I Recently lost the ability to hear the audio in some news, facebook and youtube videos. The sound/audio works fine on my iPad. Why is this? Is there some way to change or reset settings? Cookies?

iOS 8.2 has since fixed this bug. YAY!

Why do I have multiple SG24 modules which have lost their ability to supply an excitation voltage?

Similar Messages

Maybe you are looking for