Why do i have ringing when using logic express

new to logic express...when i hit the 'i' or 'r' to try to get sound, i have an awful ringing sound, like feedback.  first time that i'm trying to lay down some tracks, dont know what to do....any help out there?

think i understand some of what 's going on...the mac mic is on.  not sure how to turn it off so that i can run through the interface. 

Similar Messages

  • Why won't cells autopopulate when using numbers on the ipad? Anyone have a fix? Have also created a dropdown menu, but that does not translate from excel to numbers either.

    Why won't cells autopopulate when using numbers on the ipad as they will in excel? Anyone have a fix? I have also created a dropdown menu in excel, but that does not translate from excel to numbers either.

    Glad you got it sorted out.
    Diane123456 wrote:
    > Thanks Vix, Joe, and Mad Dog for responding, the site is
    in
    > development so it's behind a password, which I probably
    could share
    > but MD is right, it was a margin issue. I didn't think I
    needed to
    > set a margin but I had to put a left margin of 2em on it
    for the
    > numbers to display on IE7 or IE6
    >
    > This is actually a rather common issue with CSS layouts
    (it is not an
    > issue with designs using tables) - there are several
    posts for ULs
    > which you may be interested in - see
    >
    >
    http://www.adobe.com/cfusion/communityengine/index.cfm?event=showdetails&postId=
    > 1981&productId=1&loc=en_US
    >
    > -- and once I got the numbers to show I ran into the
    same problem as
    > the commenters on the above thread, which noticed that
    the vertical
    > alignment doesn't work well with IE, and which noted
    that apparently
    > IE has a stutter because it just kept repeating "1" "1"
    "1" -- so I
    > finally went with a hanging indent and just put the
    numbers in there
    > manually - fortunately it's not a long list.... if you
    have a fix
    > for the stutter, or know of another place to get help
    with CSS layout
    > browser quirks please share -- if I find another one
    I'll share also
    >
    > thanks again, Diane

  • Why does iMovie abruptly abort when using record voice over?

    Why does iMovie abruptly abort when using record voice over?

    Hey PTD1,
    Thanks for the question. If I understand correctly, iMovie unexpectedly quits when using record voiceover. I would recommend that you read this article, it may be able to help the issue.
    iMovie: How to troubleshoot "Application Unexpectedly Quit" messages - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4) A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

    I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4)
    A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

    Sounds kind of stupid, but check to make sure that your iphone case cover is not blocking the edge of the camera lens.  I had a silicone case on my 3S and when it got older, it started tot slip and the edges of my pictures were blurred.

  • Does 2012 mac mini get very hot when using logic pro

    does 2012 mac mini get very hot when using logic pro

    Are you saying that your machine does or is it an enquiry before buying ? I use a 2011 server model - well, it does get hot over a period of time, but I've very rarely heard the fan kick in, its a surprise when it does. As far as I know the casing has been specifically designed to conduct heat, rather than having any fancy grilles and so on, being so small in size. I haven't found it to be cause for concern, if that's any help.
    Slidersson is in need of more cold showers.

  • HT3310 Why can't I hear when using my ear plugs on my I-pad

    WHy can't I hear when using my apple ear phones on my I-pad?

    Make sure that they are inserted all the way into the jack. It takes a firm push to insert them all the way.

  • Can you use logic express on a mac mini for recording

    Can i use logic exprees on a mac mini for recording? Ive seen alot of 8,12, and 16 track recorders with a cd burner and it seems like a logical and more productive gues for me to buy a macmini for the same thing of recording and then I can uses logic express, a far better program for recording. can the mac mini handle the load of processing tracks and how much ram should I uses? thanks tim

    sorry, I'd like to butt in here:
    I would like to do the same thing, so I am curious about this forum and rather than starting a new one, can I get some advice on this possibility:
    Mac Mini
    1.83GHz Intel Core Duo
    2GB 667 DDR2 SDRAM - 2x1GB
    80GB Serial ATA drive
    Glyph External HD 250 Gig
    Mackie Onyx 1620 w/Firewire
    Logic Pro 7.2
    thoughts?
    The most number of tracks I could see at once would be 16.
    Here is something I am most curious about...
    Firewire Hard drive
    Firewire Interface/mixer
    Firewire camera for FCP
    to much firewire?
    Please let me know if you have other thoughts aswell...
    Shuke
    thanks guys, this forum is fantastic!

  • How do you use Logical Expressions in the RTF?

    How do you use logical expressions such as "and", "or" when you want to do conditional printing of XML data in the RTF?
    For example:
    if (conditionA and conditionB) then...
    Regards,
    Smita

    Thank you Sir! - I had something else wrong in the expression, but the error message I was getting was a bit misleading and sent me down the wrong path.
    Thanks again, and best regards:)

  • Can I use logic express with my Macbook

    I just got a macbook and i was wondering if I can use Logic express or pro on it??

    yes!
    it of coourse depends what you want to do with it - but yes!
    by all acounts logic express and pro will run very well on the new macbooks.
    I'm using pro on my old powerbook - just about manage to use it live and it's slow but useable to get ideas down onto and am using an intel imac as my main studio computer with logic pro 7.2.3 - it's essentially the same as a macbook except it doesn't have integrated graphics and it has a faster hard disk which does make a difference. Apart from that i'm sure your new macbook would toast my powerbook in terms of performance.
    Be sure to get the intel version of logic (7.2 and above) as an older "ppc" version may run but is not supported and would probably run very slowly.
    Enjoy!
    Rounik

  • Can i use any wireless printer when using air express

    can i use any wireless printer when using air express

    If you are looking for a new printer, any wireless model will work with the AirPort Express.
    But, since you indicate that you have an iPad, you would want to make sure that the printer you choose is AirPrint compatible. This way, you will be able to print from your iPad....if you need that function.
    See this Apple support document for info on AirPrint and compatible models.
    http://support.apple.com/kb/HT4356

  • Midi connecting problems: using Logic Express 9 with MBox 2 interface and a Mac OSX 10.6.8

    I have a Mac OSX and I use Logic Express 9 on it. I also use an MBox 2 digidesign. Im having trouble connecting midi and getting it to work from my Roland Keyboard Midi, to the back of my Mbox 2 Midi. Its just not working at all. Does anyone know how to make Midi work with the Mbox 2 using Logic Express 9 on my OSX 10.6.8

    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Also try turning off Bluetooth

  • Is there any way to stop the delay between different sets of speakers when using airport express?

    Is there any way to stop the delay between different sets of speakers when using airport express?

    Unfortunately, I don't have either a Slingbox or iHome speakers so I won't be able to reproduce any of the issues you are having. With the fact that you live in large apartment complex would still lead me to believe that Wi-Fi interference may be the reason that you are having streaming issues.
    I suggest you perform a simple site survey, using utilities like iStumbler, or AirRadar to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible.

  • Black splash screen when launching Logic Express 7.2.1

    hello, i recently installed final cut express hd (universal) and a recent pro app update. ever since then, i get a black splash screen when launching Logic Express 7.2.1. i've tried reinstalling logic, but nothing changes. how do i uninstall the pro app update, will this fix the problem? should i uninstall final cut?
    thanks.

    Hi M,
    did you tryed this?
    http://www.apple.com/support/downloads/proapplicationsupport31macosx104.html
    Best regards,
    Jorge

  • Why do I have lines when I use the pattern tool ? is it an illustrator bug ? When I register it in .pdf or .jpg the line disappear ?

    Hello,
    When I use the pattern tool via the window which is here : object / patter / create --> and I choose in the mosaic style by brick columns I have this result : http://bit.ly/1nozEl3
    I don't understand why do I have those lines ? thanks for helping.

    Hello Jacob,
    Thanks for responding.
    Yes, it's seems to be a screen artifact, when I zoom they seem to move or disappear but they're still here.
    With SVG, it's the same.
    When I untick Anti-aliased Artwork, the artifact disappear, but my designs change, no more precision ! Have a look here :  http://bit.ly/UyGoVe
    Any other solution ?
    Thanks

  • Primary Archivelog Management When Using Logical Standby

    I was wondering if anyone has seen or created a script to do archivelog management when using standby databases. We recently had an experience where our standby database and primary database got out of sync and we had to recreate the standby....I had hope to advoid this but it was easier than trying to recall tapes to retrieve the backups of the archivelogs from the primary.
    Management on the logical side is fine. I know of the ability to delete log files on the logcial standby after they have been applied to the database. However, this does not address the issue of the management of archivelogs on the primary site. Does anyone have a script that only deletes the archivelogs from the primary site after they have been applied to the logical standby? Now this is a LOGICAL standby not a physical standby....RMAN has the capability of doing this for a physical standby but I don't know of any commands ro setup to allow it to do it for a logical standby.
    Regards
    Tim

    Even with 1 TB of space I only have room enough for about 3 days worth of archivelogs. Working in the environment that I do, there is another group in charge of the ESAN which serves many different systems. They were wanting detail reasoning and justification why I needed 3 days worth of space when I requested it.
    It is not truly a problem, there are always work arounds. I can restore from the backups, I can put in scripts to send out email notification when the standby falls to far behind the OE. However even with all that, I wanted to write a script that someone could run without having to check the system to delete the archivelogs if space becomes an issue on the production side.
    I was just hoping to see if anyone had a script to do it already.
    Thanks for all the input.
    Regards
    Tim

Maybe you are looking for