Why do i have to turn on my cellular data to send my photo or video over text ( otherwise it wont send at all) when my home wifi is on
every time i try to send a photo or video over text it try and send for like 5 seconds and then not deliver.
Your Welcome.. and on your questions I'm going to have to put a pot of coffee on and put my thinker into action see what I can come up with with sending pictures messages The Link I included explains the why and the How..
On your second Question how to take a picture that is in the folder you mention try long pressing on the picture and see if brings up a small list of options if does see if shows your Gallery as an option if so press it see then see if any happens hopefully it move to the Gallery.. hit your home button then hit your apps button go to Gallery and see if the picture is in there and it may already be in there under a certain label but give that a try and let me know what ya came up with.. b
http://en.wikipedia.org/wiki/Multimedia_Messaging_Service
Similar Messages
-
Do i have to turn off the cellular data when wi-fi is connected?
i have problems with wifi and 3g/edge connection. even if it says that wi-fi is connected, the one downloading my data is 3g/edge. when i turn it off the phone says internet is not connected.
There's no reason to disable cell data when connected to WiFi. How did you determine that cell data network was downloading when a WiFi connecton showed?
Note that when the phone is sleeping, The WiFI connection drops and cell data is reconnected. Any background data transfer while the phone sleeps may be using the cell data network. If you absolutely don't want any cell data network usage, disable it. -
Why do I have to turn on my wi-fi manually every time I log into my computer? Can't it just log in when I do?
Test after taking each of the following steps. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved.
2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
6. Repair permissions on the startup volume.
7. Turn off Bluetooth and test.
8. Reset the System Management Controller.
9. Reset the PRAM.
10. Reinstall OS X. -
iphone 6 always hangs/stops working when i turn on my cellular data. i have already switched my sim card. It works perfectly on wifi
Which of the basic troubleshooting steps described in the User Guide - restart, reset, restore - did you try before posting?
-
hello dear frends. Why firefox not have azerbaijani language localised version? on this language speaks 60 million people over the world...
Translations are done by volunteers. There has been a volunteer working on a translation but it is not yet complete. No time scale as to when there will be an azerbaijani version.
-
Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2? My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old. It;s been working perfectly up until now. I have no problem on my home WIFI, or through personal hotspot working through my iPhone 5.
I have worked with AT&T, replaced the SIM card with a new one, and done a backup/restore to factory settings, all with the same result that when I turn Cellular
Data on, with or without Enable LTE, it goes into "searching" mode, or reports "no service". My iPhone 5 works perfectly on iOS 8.1.2, on Cellular. I've browsed the blogs and have tried Apple's suggested fix, all to no result.
Oddly enough, every once in a while I do get connected to the network for a short ime (minutes), but it always returns to "searching".
I've filed a report with Apple, along with a request that they contact me, but no results yet.
Help? (and thank you).Hello razmee209. Thank you for your response. I spent the better part of yesterday working with Apple Support. They tried their best, to include backing up photos to my HP laptop, backing up the iPad to iCloud, then resetting the iPad in total. Same problem. I restored from the cloud to recover my apps, same problem.
AT&T installed a new sim card - same problem. I spent time with AT&T Support yesterday, too. In both cases, (Apple and AT&T) the support techs who worked with me were extremely polite, courteous and helpful to the best of their abilities, but I think the problem lies deeper, and nobody at Apple is admitting they have a problem with iOS 8, that I'm aware of.
I didn't have this issue before I upgraded to iOS 8.1.2.
Everything else with the iPad works fine: WIFI, Personal Hotspot, email, all my apps, etc.
In browsing the web for this issue I see that many other folks have the same problem. I filed a report with Apple this morning, requesting that they contact me, but no word yet. I was going to go to iPhone 6, and had been considering the iPad Air 2, but I see reports of this problem with those units as well.
At this point I don't think I'll be spending any more money with Apple, at least not till this issue is resolved.
Thanks again for your response and suggestions. -
Why has my 3G stopped working on my iphone? It is enabled, and I never had problems with it before, but for about 2 months now it has refused to work and as a result I can't send any attachments such as photos or videos via text.
Cellular data is a feature from your phone carrier. Have you contacted them to resolve your issue.
-
I have problem c connecting to cellular data network. There is massage "couldn't activate cellular data network, PDP authentication failure". What is it and how I solve this problem?
If you have a data only plan for the iPad with your carrier, if no change after powering your iPad off and on you will need to contact your carrier.
-
i updated my iphone to ios5 and but i forget to turn on my cellular data andi cannot use my phone cause its not activated and no service en i connect to itunes no sim card
Did you try to reset your iPod by holding the sleep an home button until the Apple logo comes back again?
Did you try to set it up as new device? How to back up your data and set up as a new device -
I cant get call when i turn on my cellular data on iPhone5
I cant get call when i turn on my cellular data on iphone5. My carrier provides only 2G data. Can someone please help me?
Try resetting the iPod by holding the Menu and Center button for about 10 seconds. You should see the screen shut off and come back on with the Apple logo. If that doesn't work you'll want to try to restore the iPod through iTunes.
-
I can't turn off my cellular data for facebook
I tried to turn off my cellular data for Facebook, but it is on when I check it immediately...
I tried...
Settings >> Cellular >> Faceboook
and
Settings >> Facebook >> Settings >> User Cellular Data
both doesn't work. I also tried Settings >> General >> Reset >> Reset Network Settings. then try again. But it doesn't work.
Any idea or solution?
It is the same for the F#$% Facebook Messangergo to setting---->general----->accesories----->turn of accesotive touch and then
-
I feel like I should be able to sit at home and send a picture without turning on my cellular data.
If you are connected to a wi-fi network, you can send an iMessage with a photo or video without having to use cellular data.
Regular text messages (SMS) are exchanged via your carrier's cellular network - the same network as calls. Data is not required.
Picture messages (MMS) are exchanged via your carrier's cellular data or internet network.
This will not be fixed since there is nothing to fix. -
TS2972 why do I have to turn sharing off and back on each time i use my apple tv?
Whenever I switch to apple tv and try to access my files, I get the instruction to turn sharing on. When I check, the sharing is already on. I have to turn it off and then turn it back on for the apple tv to detect it.
There is somewhere on here a thread where some folks have done some in depth technical digging into the problem.
It seems that in those cases there are multiple 100+ TCP ports being held open between itunes/mac and the atv. I see this x3 with all my atv's when they were connected via ethernet cable. Home sharing is running out of ports to use in simple terms.
What on earth port forwarding can do for the problem i do not know, you can only forward to 1 device, how would this fix the probelm for subsequent atv's on the network?? It would be madness to do this anyway why would you open a secure port to the internet just to get a media player working
There are so many reports of this problem manifesting itself in various ways it is hard to give a simple answer
Some of the solutions just do not make any sense, solutions that work for some are opposite for others wifi <-> ethernet <-> wifi
I am convinced this is an internal networking issue at a base level, nothing to do with IP6,DHCP/Static/PortForwarding etc. Sleeping atv's may exagerate the problem
It will end up being a . or a , in the complied code somewhere in the last update of either itunes or ios
Someone on that thread has written some slick code to check for this problem and restart itunes if it finds it which may be a solution if it cant be solved other ways
My problem went away when I moved my atvs to wifi connection only, but then I know my network is otherwise good -
Since going up to Lion I am having problems with my HP Officejet 7500A printer. It is on the network wirrelessly. After every page I have to turn the printer off and back on again because my mac cant find the printer on the network. The windows mechines here can still find it, but not my Mac Pro. What is going on?
Obviously I have it set up right because I can print to it. problem is my mac thinks it goes off line every time I tell it to print another document.
Anyone know of a fix?
Thanks!Lion may have replaced files that partially made up your printer drivers. Either way, HP saw fit to make a new set of drivers specifically for 10.7 so you may want to use it simply to avoid any bugs tehy found.
Get it here:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-98095-2 &cc=us&dlc=en&lc=en&os=219&product=4083652&sw_lang=
Hope I helped -
Can not use all apps with cellular data
In Settings/General/Restrictions if you tap on Cellular Data Use there should be 2 options: Allow Changes or Don't Allow Changes. If you don't see these options is that where you see "Cellular data is turned off for 'Setting'?
Do you have a corporate MS Exchange email account on your phone? If so your administrator may have added an override on this setting.
Maybe you are looking for
-
File permission in unix - file is created by File Adapter
I've created a composite that creates an output file in unix server. Problem that I have is the file permission. When file is created it has a permission like below even though this directory is widely open - chmod 777. -rw-r----- 1 oracle dba 1123 M
-
Financial reporting client for version 11.1.1.2
Hi all, A customer of mine would like financial reporting client. I can't find 11.1.1.2 on edelivery. I downloaded the one for 11.1.1.3 and I also have to include the installer for the assembly files to work. This is sure to beef up the file size! So
-
RE: memory utilization : more info
Jeanne, Here is some stuff from experience and also (very importantly) the Advanced Application Dev course : 1. Sometimes with large objects particularly arrays within arrays, BLOBS and large windows the garbage collector can get inself into a knot.
-
Best Final Cut Studio tutorial?
Hi, I would like to know where to find the best tutorial for Final Cut Studio. I have found some free downloads on the internet, but I would like the best DVD on the market to learn about final cut pro, soundtrack and all the other programs in the Fi
-
Pls906 compiler error for on_logon trigger
Hello, I wrote a PL/SQL program for on_logon trigger. But it has compiler error(no message file, ora-06540 error and pls906 error). The program is as follow: DECLARE un VARCHAR2(80); pw VARCHAR2(80); cn VARCHAR2(80); BEGIN /* ** Bring up the logon sc