Why do I have to use the tab key even more to tab between page elements.

Firefox versions prior to ver 4 I used the tab key to tab between page elements (form elements, buttons, etc). I upgraded to ver 4 and now when I tab from form element to form element I first see a gray line outlining the element area and then another press of the tab the element becomes active for me to use. I now have to use double the tab keys to move between form elements.

Hello new_mac_user, see if the next works
# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''', to continue to the about:config page.
# in search field type (or copy/paste from here) '''accessibility.tabfocus'''
# double-click on it and change the value to '''4''' (probably you have 1 the default on mac)
# click ok, exit firefox and restart it.
with the above you give focus to links (and linked images) only when you press the tab key.
see for more info : http://kb.mozillazine.org/Accessibility.tabfocus
https://developer.mozilla.org/en-US/docs/Mozilla/Preferences/Preference_reference/accessibility.tabfocus
thank you

Similar Messages

HT201250 Why do i have to use the password for time capsule every time i start my computer

Why do I have to use thr password for time capsuel every time I start my imac?

With hindsight, the previous response I got from Apple was just a way of shelving the problem.
Having just had to reset my password after another 3 months, I contacted Apple again, and it happened that the senior advisor whom the phone agent consulted had had exactly the same problem as me, and had found that iTunes could fix it. However when I spoke to iTunes they told me I needed to speak to Apple ID account security. The Apple ID account security representative spoke to a senior adviser, then told me that it would be fixed after I reset my password. However I am not convinced that anything was actually done, so I may be back here in another 3 months ...
To modify Roger's advice, the solution I was given is: go to https://expresslane.apple.com ; select 'All Products and Services' in the first column, 'iTunes' in the second column, 'iTunes Store' in the third column, then "Account Management" and "Apple ID account security", then "Talk to Apple support now". A complication is that the "Talk to Apple support now" option only appears when UK English is selected. So you either need to select UK at the top, or find another way of making phone contact (the email link just went back to the person in iTunes)!

Why do I have to use the mobile site to buy Skype ...

Viber, TextNow!, every messaging app lets you use in-app purchasing, WHY DOESN'T SKYPE???? it's LAZY and incomvenient that we're forced to use the website, log in and input all our info. I'm not buying a penny worth of credit until I can use the standard payment method every other app uses.
I feel insulted. It's like they intentionally made it more difficult for loyal Windows phone users.

Did you have an unlimtited data plan before you purchased your Pixi? Verizon told me two different times today that the free hotspot was no longer available unless you had an unlimited data plan BEFORE the July price change.

Why do we have to use the sales area?

Dear experts,
I was looking for SAP Documentation but couldn't find anything relevant.
I'm using CRM 5.0 and ERP 2005. I'd like to implement the following scenario:
- Create BP / BA / Technical Object and contract in CRM
- Replication in ISU
- In ISU, we are using the contract partner (role MKK) with a SD Customer.
Can I implement this scenario without using sales area in CRM?
From my understanding, we need to set up the sales area in CRM for 2 main reasons:
Reason 1) Supported scenarios for BP replication
          Option a) CRM sold to party without sales area <-> ISU contract partner without SD
          Option b) CRM sold to party with sales area <-> ISU contract partner with SD
          So SAP doesn't support the scenario: CRM sold to party without sales area <-> ISU contract partner with SD
Reason 2) We need the sales area to use sales transaction. For my scenario, i need to use service contract. so i need the sales area in CRM.
Could you please tell me if i am correct? I heard that some people manage to replicate the contract partner in ISU without using sales area in CRM. And the SD customer was correctly created. (Because the SD customer is automatically created when a contract partner is created in ISU).
Thanks in advance,
Best regards,
Stephanie

Dear Vikash and dear Javier,
Thanks for your help. I am still confused with these sales area. But what you say is:
- We can create a sold to party without sales area in CRM and it could be replicated into ISU as a contract partner with an SD customer.
- To replicate the service contract into ISU, I need to assign to this document a sales area. Is it necessary because it will be replicated in ISU as an utilities contract and it's not an SD document? If the sales area are required, i will have to set up these sales area in the organizational structure (PPOMA_CRM). In this case, when I will create the service contract, I will have to determine the correct organisational structure based to some custom/specific rules?
Sorry for these riddiculous questions but it's hard for me to understand this sales area concept.
Thanks again,
Stephanie

Whenever I type in a text box I cannot click somewhere else in that text box to edit a word instead I have to use the cursor keys to go back why would a new browser have this basic problem?

after clicking once in a text box I can not click anywhere else in said text box or i loose the ability to type/edit the text. This is a problem this browser has had since the beta is it specific to Mac's or what because I see this as a major problem. I've tried uninstalling it and reinstalling and everything. I now officially hate your browser. also whenever i go to start it a pop up comes up that says error.... and then i click ok and i can run the browser same thing happens whenever a pop-up comes up it does not block pop-ups and i have the pop-up blocker on i truly hate this browser! The pop-up that comes up says this "can't create mcafee plug-in object: TypeError: Components.classes[cid] is undefined" elaborate please!!!!!!!

I am not even a Mac user but a suggestion
#try disabling McAfee site advisor if you have it installed
#if that helps then try updating it to the very latest version
Also you mention Beta versions of Firefox. If there is any possibility that you have been using multiple versions of Firefox, then note it would be a good idea to ensure each is used in its own separate and unique [[profiles|profile]]

Why do i have to use the podcast app in iOS6 since it doesn't work correctly

I upgraded to iOS 6 and now you cant download podcasts through the itunes app... Now you have to download the podcast app and use that instead, but that wont work correctly for me... keeps hanging and not downloading the actual podcast. Does anyone know a way to get podcasts in iOS 6 without using this app?

Separating out a podcast app is a step backward. From a marketing perspective, podcasts are seen as something independent from music and television. But from a functionality POV, it just makes it harder to manage your audio on your iPhone.
Consumer Technology's objective has always been to make one device do more things, i.e. combine a phone into a music player. This step is akin to taking the ability to text and spinning it off onto a gadget you attach to your key-ring.
It's still there, but annoying to dig out when you want to use it.

Locked at load screen apple thingy twirls....had it on for over an hour, have tried using the Shift key....no luck...the grey screen of patience testing is winning

so i decided to use my old 15 inch macbook, circa 2008, (around christmas i got it) as my hard drive for my sonos system, ok, that's too much info. the nuts and bolts of it, is that my macbook is plugged in, and starts with the gray screen and the little twirly gadget, but hence it moves forward no more...i have tried the Safe start, although i'm not sure how long you have to hold the command button....just trying to get this baby back among the living i submit to you who have chosen to read this and am as pliable as warm play doh. i'm not sure i can find the boot up disks, as i moved recently...but other than those simingly insurmountable issues its just wonderful to be on the right side of the grass.....back to you community!

Well the next step, while it should not cause data loss, at least has the potential to lose your data. That would be reinstalling the OS. It is also possible that the data is already gone though I hope that is not so. If you decide you want to procede, boot again to the Snow Leopard (10.6) install DVD and work through the installer. Choose reinstall when asked what you want to do. Do NOT choose erase and install as that would definitely lose your data.
I'll keep my fingers crossed. Please in the future make sure your important data is backed up.

I do not see any icon for accessing groups next to my tabs as indicated in the help. I have to use the shortcut keys.

I am using Windows XP SP3. In the help for Firefox 5 it indicates icons on the screen to click like the one in far right of the tab bar for access the groups. I have never seen these so not sure if they don't load for my setup or whether I just need to switch them on somewhere (cannot find anything in the menus applicable).
Does Firefox 4 and 5 look different for some operating systems?

You can also find a link to open Tab Groups in the drop down list of the List all Tabs button at the right end of the tab bar (Shift+Ctrl+E).

Why do I have to use the File menu to exit LR 4.1?

My LR 4.1 opens without the normal Windows 7 header information. I do not see the application name, and can not minimize the window, adjust its size or exit the program by simply clicking on the usual 3 boxes at the top right corner of the application window. They are absent.
I also have LR 3, on my machine. That still opens normally with all the usual "windows" items above the application window.
I'm not sure exactly when the problem started. I've been ignoring it for at least a couple of weeks.
Today I tried looking for a solution in the various pull down menus without success.
Anyone have an idea what might be going on? Thanks.
Jerry

Thank you, Simon!
Keying F made the problem go away.
I've been using LR for almost a year, and do not recall coming across that "F" function before.
Jerry

Why do I have to use the drop down "Get Messages" option each time; msgs don't download automatically.

I have checked with my Internet provider; all settings are set to 'download' at opening & every 5 minutes after that.

Have you considered using either a jump drive or a portable hard-drive to back up your iTunes files?
In the beginning, I was using a 8GB jump drive to back up my iTunes music folder. I ran out of space on that, so I purchased a 250GB portable hard drive and have been backing up my iTunes music folder on that. Very easy.....you just put the USB port of the hard-drive into your computer...COPY your iTunes music folder from the computer and PASTE it to the portable hard-drive.
Message was edited by: journalist3072

Properties problem.Why do I have to use the absolute value for the loadfile

My class is in the default package, location = D:\Java\MyClass.class
try{
p.load(new FileInputStream(new File( "Properties.txt" )));
//This fails
try{
p.load(new FileInputStream(new File( "D:\\Java\\Properties.txt" )));
//This worksIf I want my app to be deployed in any folder then having the path hardcoded in the app is not an option

try using getClass().getResourceAsStream instead of FileInputStream ...

I use a French bluetooth keyboard how do i lock the numbers for doing calculations? Does anybody know? i.e. the numbers are above the top row of keys and you have to use the shift key to access them. You can't use the cap lock key to lock the numbers.

How do I lock the numbers on a French keyboard if I'm using a small blue tooth keyboard with no number pad?

How do I lock the numbers on a French keyboard if I'm using a small blue tooth keyboard with no number pad?

When I use the Alt key and the clone tool, I get a message that I did not use the Alt key to define

Whe I use the Alt key with the clone tool, I get a message that I have to use the Alt key to define the area to be copied. What am I doing wrong?

I tried to check the alined box, but it would not work. I was able to check
the Sample box, but they they give you about 5 choices to check and I have
no idea what they are all about. I appreciate your help.
Dino
In a message dated 9/18/2012 11:09:06 A.M. Eastern Daylight Time,
[email protected] writes:
Re: When I use the Alt key and the clone tool, I get a message that I did
not use the Alt key to define
created by hatstead (http://forums.adobe.com/people/hatstead) in
Photoshop Elements - View the full discussion
(http://forums.adobe.com/message/4707426#4707426)

I have been using the Firefox feature in which I could have multiple sets of tabs open but see only the set I was working with. I updated and now feature is gon

I have been using the Firefox feature in which I could have multiple sets of tabs open but see only the set I was working with. I updated and now feature is gone. I had a small icon on the upper right side of my toolbar. I used it all the time to keep separate windows for news, financial items, travel plans, etc. Has this been removed from Firefox?

Hi,
The [https://support.mozilla.org/en-US/kb/tab-groups-organize-tabs Tab Groups] feature is still present. You can try to right-click the + after the last tab and [https://support.mozilla.org/en-US/kb/how-do-i-customize-toolbars Customize]. If the icon is hidden behind another, or if it's available inside the Customize mini window, you can place it back. If the problem persists, you can also try to '''Reset toolbars and controls:''' and '''Make Changes and Restart''' [https://support.mozilla.org/en-US/kb/Safe%20Mode Safe Mode] start screen.

I don't have a computer on which to convert a digital booklet in iTunes to a useable form for iBooks. Why won't it download using the cloud like all the other media I purchase on my ipad?

I don't have a computer on which to convert a digital booklet in iTunes to a useable form for iBooks. Why won't it download using the cloud like all the other media I purchase on my ipad?

LP content can only be downloaded on a computer's iTunes (or 1st gen Apple TV), you can't download them on an iOS device - and I haven't seen anything that say it will change in iOS 8. If you don't have a computer then at the moment you won't be able to download/view LP content
About LP : http://support.apple.com/kb/HT3823
After you buy an album with iTunes LP on an iPhone, iPad, or iPod touch, the album's songs will download directly to the device. The iTunes LP will download to iTunes on your computer when you choose Store > Check for Available Downloads.

Why do I have to use the tab key even more to tab between page elements.

Similar Messages

Maybe you are looking for