Why do i keep getting "an error occurred while preparing the installation of Mavericks?

Greetings all,
I've been trying to install Mavericks on my mid-2007 24 in iMac. I have plenty of hard drive space and I've downloaded Mavericks several times. Every time I try to install it, I keep getting the 'An error occurred while preparing the installation. Try running this application again.' message. I've run disk utility several times and verified the disk; repartitioned the drive and created a clean partition and tried to install on the new partition- same result. And I've even tried installing on an external drive- again no luck. I've been running Mountain Lion since it came out without a problem, so anyone have any ideas?
Thanks in advance.

Try booting into the Safe Mode and installing Yosemite there.
Safe Mode - About
Safe Mode

Similar Messages

  • Getting "an error occurred while preparing the installation" when trying to install Yosemite

    I have verified i meet all the requirements to upgrade my imac from snow leopard to yosemite. i have verified date is correct, and reset the NVRAM by holding Command+Option+P+R while rebooting. Keep getting same error "An error occurred while preparing the installation. Try running this application again." Any other suggestions would be greatly appreciated.
    Hardware Overview:
    Model Name: iMac
      Model Identifier: iMac8,1
      Processor Name: Intel Core 2 Duo
      Processor Speed: 2.66 GHz
      Number Of Processors: 1
      Total Number Of Cores: 2
      L2 Cache: 6 MB
      Memory: 4 GB
      Bus Speed: 1.07 GHz
      Boot ROM Version: IM81.00C1.B00
      SMC Version (system): 1.29f1

    Try booting into the Safe Mode and installing Yosemite there.
    Safe Mode - About
    Safe Mode

  • An error occurred while preparing the installation. Try running the application again

    I Have erased the hard drive of my MBP in order to perform a clean reinstall of OS X Mavericks, according to these instructions.
    When I tried to reinstall, my internet connection stopped (was broadcasting via another MBP and the cable from that one got disconnected), so I restarted the erased MBP to try again. Holding command+R, it booted in internet recovery (as the recovery partition was erased along with the rest of the hard drive), but could not connect over the broadcasted WiFi, so I created a bootable USB flash drive according to these instructions on the other MBP.
    This installation went smooth without any hiccups, but due to an oversight I had to do it again the next day.
    I took the same steps, with the same bootable drive (I did not create a new one the first time) but this time I couldn’t get through the prepare to install phase. At the end, where the “about a second remaining” message stays for about 20 minutes, I get the “An error occurred while preparing the installation. Try running the application again” message. When I quit the installer (only option at that stage) and return to Disk Utility, the internal drive on which I tried to do the installation is not visible anymore.
    I tried this (after a reboot every time) with a new bootable usb drive with the same download of the OS X Mavericks installer and with a new one, each ending with the same error. The installer was downloaded on an MBP on which Mavericks is also installed, with the same Apple ID. The App Store did not allow me to change Apple ID for the Mavericks download. Can this pose a problem? It did work the first time, though.
    Note that this error occurs at a different stage than the one with the same message due to the wrong date (this discussion amongst others). I also checked the date in terminal and this appears to be correct, when I consider the timezone.
    Here are a few lines from the installer log (omitted similar lines and lines that could contain personal information). The most important line is the last one, indicating the error.
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: @(#)PROGRAM:Install  PROJECT:Install-846
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: @(#)PROGRAM:IA  PROJECT:InstallAssistant-476.8
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Hardware: MacBookPro9,2 @ 2.50 GHz (x 4), 4096 MB RAM
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Running OS Build: Mac OS X 10.9.3 (13D65)
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: DYLD_NO_FIX_PREBINDING=1
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: __CF_USER_TEXT_ENCODING=0x0:0:0
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: PWD=/
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: SHLVL=1
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: __OSINSTALL_ENVIRONMENT=1
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: CI_DEFAULT_OPENCL_USAGE=0
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: OS_INSTALL=1
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: _=/System/Library/CoreServices/Language Chooser.app/Contents/MacOS/Language Chooser
    Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using distribution archive from /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/OSInstall.mpkg
    Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Configuring products from SharedSupport folder
    Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Install is double-dmg. Not adding chunklist to download list.
    Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using product <OSInstallDVDProduct> based on media at /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport at distance 5
    Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using product <OSInstallESDProduct> based on distribution at /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/OSInstall.mpkg at distance 5
    Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Checking Software Update catalog URL https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: JS: installCheckScript threw exception TypeError: 'null' is not an object (evaluating 'my.target.systemVersion')
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Could not load Software Update catalog: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fedd960ccc0 {NSUnderlyingError=0x7feddc866ef0 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog, NSErrorFailingURLKey=https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog, NSLocalizedDescription=The Internet connection appears to be offline.}
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Could not fetch SWU catalog to create SWU product
    Jun 22 02:14:49 localhost Install OS X Mavericks[423]: LSExceptions [0x7fedd9446e50] unloaded
    Jun 22 02:15:12 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
    Jun 22 02:15:12 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
    Jun 22 02:15:12 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
    Jun 22 02:20:55 localhost Install OS X Mavericks[423]: Created IATool object:dbe23a50
    Jun 22 02:20:56 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
    —a lot of similar messages, but for other packages —
    Jun 22 02:20:56 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
    Jun 22 02:21:09 localhost Install OS X Mavericks[423]: Preventing machine sleep.
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using product IA_PKSecureNetEnabledProduct <file:///Volumes/schijf/OS%20X%20Install%20Data/> at distance 5
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using existing boot files dir at /Volumes/Install OS X Mavericks/.IABootFiles
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using mutable product path: /Volumes/schijf/OS X Install Data
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using boot files path: /Volumes/Install OS X Mavericks/.IABootFiles
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
    —a lot of similar messages, but for other packages —
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.OSInstall
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
    —a lot of similar messages, but for other packages —
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.OSInstall
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Retrieving 0 packages (0.000 GB)
    *****This is where the timer starts saying “”About a minute remaining”*****
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Verifying InstallMacOSX.pkg/InstallESD.dmg
    Jun 22 02:42:36 localhost Install OS X Mavericks[423]: Finished operation queue
    Jun 22 02:42:36 localhost Install OS X Mavericks[423]: Opening /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/InstallESD.dmg
    Jun 22 02:42:38 localhost Install OS X Mavericks[423]: Extracting boot files from /Volumes/OS X Install ESD/BaseSystem.dmg
    Jun 22 02:42:39 localhost Install OS X Mavericks[423]: Extracting Boot Bits from Inner DMG:
    Jun 22 02:42:41 localhost Install OS X Mavericks[423]: Copied kernelcache
    Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Copied Boot.efi
    Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Copied PlatformSupport.plist
    Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Ejecting disk images
    Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Generating the com.apple.Boot.plist file
    Jun 22 02:42:42 localhost Install OS X Mavericks[423]: com.apple.Boot.plist: {
          "Kernel Cache" = "/.IABootFiles/kernelcache";
          "Kernel Flags" = "container-dmg=file:///Install%20OS%20X%20Mavericks.app/Contents/SharedSupport/ InstallESD.dmg root-dmg=file:///BaseSystem.dmg";
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Done generating the com.apple.Boot.plist file
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Blessing /Volumes/Install OS X Mavericks -- /Volumes/Install OS X Mavericks/.IABootFiles
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Blessing Mount Point:/Volumes/Install OS X Mavericks Folder:/Volumes/Install OS X Mavericks/.IABootFiles plist:com.apple.Boot.plist
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ***************************** Setting Startup Disk *****************************
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ******           Path: /Volumes/Install OS X Mavericks
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ******     Boot Plist: /Volumes/Install OS X Mavericks/.IABootFiles/com.apple.Boot.plist
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: /usr/sbin/bless -setBoot -folder /Volumes/Install OS X Mavericks/.IABootFiles -bootefi /Volumes/Install OS X Mavericks/.IABootFiles/boot.efi -options config="\.IABootFiles\com.apple.Boot" -label OS X Installer
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Bless on /Volumes/Install OS X Mavericks succeeded
    Jun 22 02:45:55 localhost Install OS X Mavericks[423]: Got error in writing to /Volumes/schijf/OS X Install Data/minstallconfig.xml
    That last line indicates the error that occurred. (The internal drive on which I try to install Mavericks is called “schijf”, it also already has been called Macintosh HD, with no effect. This time I tried another name during the reformat to see if and when the installer renames the disk. Does it do this, or should I call the disk “Macintosh HD” myself?)
    By now I also got past the internet recovery issues, being able to get the progress bar under the spinning globe and the option to install Lion (not Mavericks, but I suppose that’s because the MBP shipped with Lion). When I choose this option, the installer first spends a few hours downloading additional components. This eventually took less time than first indicated, but still about 4-5 hours. After this, the installation of about 24 minutes starts, but this takes much longer than the indicated 24 minutes, each minute taking about 15 minutes. When it was less than a minute, the internet connection got disconnected (but I don’t suppose it still needed an internet connection at this stage, having downloaded all additional components) and now the “Less than a minute” message has been there the whole night (about 9,5 hours), the last 9 hours with a spinning beachball on the screen after I accidentally clicked somewhere on the screen (nowhere in particular, he shouldn’t do something because of the click. After unplugging the power adapter, the battery icon on the screen wasn’t updated, and the WiFi icon simply disappeared, instead of showing no bars like it should when there’s no connection).
    Does Anyone know how I can fix the error, because I would prefer installing with a bootable drive. Is it worth it to continue waiting on the current, apparently stuck Lion installer to finish or should I force a reboot?
    Can I try using the Recovery Disk assistant (OS X Recovery Disk Assistant v1.0) to create a recovery disk with the other MBP? I think not, as this might cause trouble with 2 different MBP's using the same license.
    Thanks in advance!

    Since this thread seems to be gaining more speed than the other one i'm working on, i figured i'd add these images to help you all out detailing the exact problem.
    I'm having the same issue and I wanted to provide some info specific to my mac, and some info in general to help with diganosis.
    First, my specs
    Secondly, I am running an aftermarket 500 GB drive.
    Third, not sure if this is realated, but this screen suggests the proress will take 3 minutes, then it abruptly umps to the restart phase after about 1.5 - 2.5 minutes.
    And finally, here is the seeminly unavoidable error message.
    Also, other things I've tried now are
    installing it from the "show package contents area",
    mounting said DMG and trying to install from there.
    installing a package file called "upgradeos.pkg"
    no luck.

  • My MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."

    My MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."
    Checking in the log revealed the following error:
    Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
    Error!! Error Domain=NSURLErrorDomain Code=-1202 "UNTRUSTED_CERT_TITLE" UserInfo=0x1086bec80 {NSLocalizedDescription=UNTRUSTED_CERT_TITLE, NSLocalizedFailureReason=UNTRUSTED
    The rest of the line is cutted off. Does anyone know what went wrong and how to fix it ?

A: my MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."

I encountered the same exact problem when I attempted to re-installed OSX Lion on an old laptop. The date was set back in 2000, which rendered the certificate obsolete. Here's how I fixed it:
From the recovery menu, select the Terminal application. Run the 'date' command to confirm the date is wrong, then set the correct date using this command: date {month}{day}{hour}{minute}{year}
e.g. date 1219195613
Exit terminal (type exit). Retry the installation.

I encountered the same exact problem when I attempted to re-installed OSX Lion on an old laptop. The date was set back in 2000, which rendered the certificate obsolete. Here's how I fixed it:
From the recovery menu, select the Terminal application. Run the 'date' command to confirm the date is wrong, then set the correct date using this command: date {month}{day}{hour}{minute}{year}
e.g. date 1219195613
Exit terminal (type exit). Retry the installation.

  • An error occurred while preparing the installation try running this application again mountain lion

    I have Macbook Pro. Previous OS was Mountain Lion 10.8.5. It was running smoothly. When I have tried to clean install the NEW Maverick 10.9 it didnt work. I erase the drive then restart for boot. nad my usb boot disk was connected. When the window came for reinstall the OS. I click. click to "continue" but then it says....there has a problem with boot. But six months ago I installed it in the same way without any error or any hamper. after that i tried many times to boot and install but i failed. i tried to recover it by internet recovery. it takes few hours. after completation the recovery the reinstall window again came. i click to reinstall then it says "an error occurred while preparing the installation try running this application again mountain lion"

    i tried several times but it doesn't work. now i am downloading again osx 10.8.5 dmg to try again.

  • The App Store will not update my apps. I keep getting An error occurred while downloading the updates.(102) What could resolve this issue?

    My App Store is no longer updating my apps or my OS. I keep getting this message: An error occurred while downloading the updates.(102) What could be the reason for this issue and what will resolve it?

    I believe its an auth error. If you tried signing in and out of the app store and downloading a free app (typical fixes) and it persists, try downloading the updates manually. If youre trying to get the Mountain Lion updates the link for 10.8.1 is here http://support.apple.com/kb/DL1571   and if you already have 10.8.1 and youre trying to update to 10.8.2 the link is here http://support.apple.com/kb/DL1580 a supplemental update came for the 10.8.2 which can be found here http://support.apple.com/kb/DL1600
    Like I said before, the error isnt that your software or hard drive is corrupt, it has to do with your AppleID authenticating the download, especially because OS updates are part of the Mac App Store. If you know your way around your system libraries or root libraries you can possibly fix it by deleting specific files that may be corrupted, otherwise you're going to want to back up your data and reinstall the OS.
    Good luck!

  • An error occured while preparing the installation.Can anyone experience the same thing?Help please.. :(

    Can anyone help me about this problem..?i tried installing it using safemode, i also tried to verify my disk in disk utility before installing it but still error...please help me.!

    Can anyone help me about this problem..?i tried installing it using safemode, i also tried to verify my disk in disk utility before installing it but still error...please help me.!

  • When I try to install yosemite, it says "an error has occurred while preparing the installation. Please open the application again."

    I currently have Mavericks Version 10.9.5. I have a 1.8 GHz Intel Core i5. My total storage is 250.14. I have an 8 gigabyte memory. I have done everything
    When I try to use the Install OSX Yosemite, it says, "an error occurred while preparing the installation. Please open the application again."
    I have gone to many websites, and have reset the PRAM, tried to change the date, but it was correct.

    ov 22 10:38:30 Anonymous InstallAssistant[1800]: Linking self-contained dmg into mutable product
    Nov 22 10:38:30 Anonymous InstallAssistant[1800]: link failed: 13 (Permission denied)
    Nov 22 10:38:30 Anonymous InstallAssistant[1800]: Opening /Applications/Install OS X Yosemite.app/Contents/SharedSupport/InstallESD.dmg
    Nov 22 10:38:32 Anonymous InstallAssistant[1800]: Extracting boot files from /Volumes/OS X Install ESD/BaseSystem.dmg
    Nov 22 10:38:33 Anonymous InstallAssistant[1800]: Extracting Boot Bits from Inner DMG:
    Nov 22 10:38:33 Anonymous InstallAssistant[1800]: Failed to delete existing kernelcache: Error Domain=NSCocoaErrorDomain Code=513 "“kernelcache” couldn’t be removed because you don’t have permission to access it." UserInfo=0x608000671280 {NSFilePath=/OS X Install Data/kernelcache, NSUserStringVariant=(
         Remove
      ), NSUnderlyingError=0x60800004a110 "The operation couldn’t be completed. Permission denied"}
    Nov 22 10:38:33 Anonymous InstallAssistant[1800]: Ejecting disk images
    Nov 22 10:38:41 Anonymous InstallAssistant[1800]: Failed to remove mutable product /OS X Install Data
    Nov 22 10:41:37 Anonymous InstallAssistant[2252]: @(#)PROGRAM:Install  PROJECT:Install-846
    Nov 22 10:41:37 Anonymous InstallAssistant[2252]: @(#)PROGRAM:IA  PROJECT:InstallAssistant-532
    Nov 22 10:41:37 Anonymous InstallAssistant[2252]: Hardware: MacBookAir5,2 @ 1.80 GHz (x 4), 8192 MB RAM
    Nov 22 10:41:37 Anonymous InstallAssistant[2252]: Running OS Build: Mac OS X 10.9.5 (13F34)
    Nov 22 10:41:37 Anonymous InstallAssistant[2252]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
    Nov 22 10:41:37 Anonymous InstallAssistant[2252]: Env: TMPDIR=/var/folders/h5/fj7f4yjd2vbbz2qdf_3v1pcc0000gp/T/
    Nov 22 10:41:37 Anonymous InstallAssistant[2252]: Env: SHELL=/bin/bash
    Nov 22 10:41:37 Anonymous InstallAssistant[2252]: Env: HOME=/Users/s210095
    Nov 22 10:41:37 Anonymous InstallAssistant[2252]: Env: USER=s210095
    Nov 22 10:41:37 Anonymous InstallAssistant[2252]: Env: LOGNAME=s210095
    Nov 22 10:41:37 Anonymous InstallAssistant[2252]: Env: SSH_AUTH_SOCK=/tmp/launch-Yb3V5E/Listeners
    Nov 22 10:41:37 Anonymous InstallAssistant[2252]: Env: Apple_PubSub_Socket_Render=/tmp/launch-sqyXdH/Render
    Nov 22 10:41:37 Anonymous InstallAssistant[2252]: Env: __CF_USER_TEXT_ENCODING=0x1F6:0:0
    Nov 22 10:41:37 Anonymous InstallAssistant[2252]: Env: __CHECKFIX1436934=1
    Nov 22 10:41:38 Anonymous InstallAssistant[2252]: Using distribution archive from /Applications/Install OS X Yosemite.app/Contents/SharedSupport/OSInstall.mpkg
    Nov 22 10:41:40 Anonymous InstallAssistant[2252]: Configuring products from SharedSupport folder
    Nov 22 10:41:40 Anonymous InstallAssistant[2252]: Install is double-dmg. Not adding chunklist to download list.
    Nov 22 10:41:40 Anonymous InstallAssistant[2252]: Using product <OSInstallDVDProduct> based on media at /Applications/Install OS X Yosemite.app/Contents/SharedSupport at distance 5
    Nov 22 10:41:40 Anonymous InstallAssistant[2252]: Using product <OSInstallESDProduct> based on distribution at /Applications/Install OS X Yosemite.app/Contents/SharedSupport/OSInstall.mpkg at distance 5
    Nov 22 10:41:40 Anonymous InstallAssistant[2252]: Checking Software Update catalog URL http://swscan.apple.com:80/content/catalogs/others/index-10.9-mountainlion-lion- snowleopard-leopard.merged-1.sucatalog
    Nov 22 10:41:40 Anonymous InstallAssistant[2252]: No available package ref for compatibility update. Ignoring.
    Nov 22 10:41:44 Anonymous InstallAssistant[2252]: Using product <OSSoftwareUpdateCatalogProduct> from product keys (null) at distance 25
    Nov 22 10:41:48 Anonymous InstallAssistant[2252]: LSExceptions [0x6080000a6120] unloaded
    Nov 22 10:41:54 Anonymous InstallAssistant[2252]: IATool launched
    Nov 22 10:41:54 Anonymous InstallAssistant[2252]: Connected to IATool 274900
    Nov 22 10:41:55 Anonymous InstallAssistant[2252]: No available package ref for compatibility update. Ignoring.
    Nov 22 10:41:55 Anonymous InstallAssistantTool[2282]: GetModel: model = MacBookAir; major rev = 5; minor rev = 2
    Nov 22 10:41:55 Anonymous InstallAssistantTool[2282]: Machine appears to be AR capable
    Nov 22 10:41:55 Anonymous InstallAssistantTool[2282]: Not an FDE volume, won't stash FDE
    Nov 22 10:41:56 Anonymous InstallAssistantTool[2282]: Staged principal user cookie to /var/db
    Nov 22 10:41:56 Anonymous InstallAssistant[2252]: Preventing machine sleep.
    Nov 22 10:41:56 Anonymous InstallAssistant[2252]: Using product IA_PKSecureNetEnabledProduct <file:///OS%20X%20Install%20Data/> at distance 5
    Nov 22 10:41:56 Anonymous InstallAssistant[2252]: Using mutable product path: /OS X Install Data
    Nov 22 10:41:56 Anonymous InstallAssistant[2252]: No available package ref for compatibility update. Ignoring.
    Nov 22 10:41:56 --- last message repeated 2 times ---
    Nov 22 10:41:56 Anonymous InstallAssistant[2252]: Retrieving 0 packages (0.000 GB)
    Nov 22 10:41:56 Anonymous InstallAssistant[2252]: Verifying InstallMacOSX.pkg/InstallESD.dmg
    Nov 22 10:42:14 Anonymous InstallAssistant[2252]: Finished operation queue

  • Trying to convert a word file to pdf and keep getting "An error occured while signing in"?

    Trying to convert a word file to pdf and keep getting "An error occured while signing in"?

    Or contact Adobe Customer Service via http://helpx.adobe.com/contact.html?product=export-pdf

  • Error: An error occurred while preparing the query in openquery on ServiceNow ODBC Link Server

    Hi Team,
    Greetings of the Day!!!!!
    I have a created a link server on SQL Server 2008 R2 databse of Service Now ODBC driver. And written a stored procedure using openquery to get the data from link server.
    Now problem is that, when i have scheduled that stored procedure in sql jobs. When this job runs automatically then we are getting below error while when i start the job mannually then it's not giving error.
    An error occurred while preparing the query "..........."
    Please help me to resolve this issue.
    Regards,
    Brijendra Pandey

    Hi Fanny,
    I had reviewed the job history. I am getting below message where as table is exist in the database.
    Message
    Executed as user: NT AUTHORITY\SYSTEM. OLE DB provider "MSDASQL" for linked server "SNOWDSN" returned message "[DataDirect][ODBC OpenAccess SDK driver][OpenAccess SDK SQL Engine]Base table:incident not found.[10129]". [SQLSTATE 01000] (Message 7412)  OLE
    DB provider "MSDASQL" for linked server "SNOWDSN" returned message "[DataDirect][ODBC OpenAccess SDK driver][OpenAccess SDK SQL Engine]Base table:sysapproval_approver not found.[10129]". [SQLSTATE 01000] (Message 7412)  OLE DB provider "MSDASQL" for linked
    server "SNOWDSN" returned message "[DataDirect][ODBC OpenAccess SDK driver][OpenAccess SDK SQL Engine]Base table:problem not found.[10129]". [SQLSTATE 01000] (Message 7412).  The step succeeded.
    Regards,
    Brijendra Pandey

  • Why do I keep getting an error message that reads "The URL is not valid and cannot be loaded."

    Whenever I click on a link that opens a new tab using "about:tab", an error pops up. The error box is titled "Alert" and the message reads "The URL is not valid and cannot be loaded."
    However, once I click OK, the page loads just fine. At first, I thought it might be one of my add-ons (Iuse a bunch), but it still occurs after restarting in Safe Mode. Any thoughts?
    I can even create the problem without clicking on a link inside a page if I simply type about:tab in the address bar.
    I am using Firefox 12.0

    Wow! I actually solved this on my own. I didn't find any thread that helped, but after reading a few, I figured poking around in about.config would help... and it did!
    Here is how I solved the problem:
    # Typed '''about:config''' in address bar.
    # When I got to the warning about voiding the warranty, clicked '''I'll be careful, I promise!'''
    # I found the setting entitled '''browser.newtabl.url''' (use the '''Search:''' box).
    # I double-clicked on the entry entitled '''browser.newtabl.url''' and deleted the info in the value portion.
    # Clicked '''OK'''.
    # Closed the tab.
    # Restarted Firefox and problem was solved.

  • Trying to update ariport express firmware to version 7.6.3 from 7.6.2 and keep getting "an error occurred when downloading the firmware"

    Multiple tries and it will not update

    airport utility showed me these screens. this time able to post figs. but was able to update the software after couple of resets
    Fig. 1
    Fig. 2
    Fig. 3
    Fig. 4
    Fig. 5

  • I keep getting an error message while installing the new itunes, I keep getting an error message while installing the new itunes

    I'm using windows and each time i try updating itunes, it downloads then starts installing and an error message comes up
    My OS is windows 7 home premium

    Hi!
    The sync infrastructure is having some issues and we are working to fix them as soon as possible.
    Check this site for the latest updates: https://services.mozilla.com/status

  • Why do I keep getting an "error 5002" when trying to purchase my wish list?

    Why do I keep getting a "error 5002" while attempting to purchase my iTunes wishlist?

    I've been trying to figure this out for the past four days myself. I tried everything I could to reset my account information since most of the forums indicated the problem was with my payment information. That didn't ring true for me because I regularly make purchases with no problem. In my case, the problem was that one of the songs I was trying to purchase had been purchased previously. I found this out when I went to each song in my wish list individually and hit the buy button. Surprisingly, each song was purchased and downloaded successfully. When I got to the sixth song or so in my wishlist, iTunes told me that I had already purchased that song and asked if I wanted to download it again. I said yes. I then hit the buy all button for the remaining songs (the behavior that had not worked previously and generated the 5002 error) and the download happened properly.
    I realize that the 5002 error seems to be generated by multiple issues, but that is what worked for me. Perhaps you could try the same approach and see what happens if you haven't already resolved your issue. Good luck.

  • TS2800 why do I get "an error occurred while backing up this iPod (-5000)"?

    I am trying to update my daughter's iPod to the latest OS, and I keep getting "An error occurred while backing up this iPod (-5000). Would you like to continue to update this iPod? Continuing will result in the loss of all contents on this iPod."
    Any suggestions to fix?

    Try looking at the previous posts on the right of this page with your same error.  They are under the heading "More Like This" The ones with the green checkmark are solved.
    Message was edited by: lllaass to refer to previous posts.

  • Maybe you are looking for

    • Urgent !!! csv to File function for international characters

      Hi , We are using fileToBinary() function provided by the samples of Weblogic Integration Server to read one csv file. It works absolutely fine when all characters in the csv file are english. But when we have some japanese characters , they are goin

    • Load special character £ in node name

      Hi, I am importing the hierarchies with special character £ and once imported it shows as following before the node name: small square box in place of £ with UTF8 as character encoding while importing and ? mark in place of £ with ASCII or ANSI as ch

    • LR positioning / workflow integration schemes for presentation

      Do a couple of talks/year at conferences re front-end and workflow.  On the video/broadcast side of things, the subject of LR rarely surfaces.  We integrate LR into the workflow as a front-end pre-process prior to absorption by asset management. Thin

    • Can't install OS X 10.8.2

      Ok. So I open up the AppStore and I'm greeted with the availability of OS X.8.2 and an update to iPhoto. I click "Update All," and AppStore tells me that fails because the updated iPhoto can't be downloaded until I have 10.8.2. Ok, so I click "Update

    • How to change the log file path in BEA tuxedo 6.5 client in Windows xp

      Hi, I am using BEA Tuxedo 6.5 client in windows xp. The log files are created in C: Kindly help me in changing the log file path and also i want to know where these configurations are set. Advance thanks !!! Regards Bunsim