Why do I keep getting authentication errors when trying to get the channels?
HI! The only tv channel I've been able to get is HBOgo.... But there are more channels that use my cable provider, and none of them are authenticating.
Hello Clkeck,
The article linked below details how to go about contacting the providers involved with the channels available on your Apple TV.
Contact Apple TV content providers
http://support.apple.com/kb/HT4799
Cheers,
Allen
Similar Messages
-
I keep getting an error when trying to receive the new update iOS7 on iPhone5. Any suggestions?
Do the update using iTunes on your computer.
Plug your iPhone into iTunes (current version), let it sync, then click "Check for Updates" on the iPhone's summary page in iTunes. -
I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before
Solution:
Open Disk Utility.
Select your external hard disk and run a “verify” on it. After a few minutes (depending on the size of your drive), you should be good to go. You don’t need to run a “repair” on it... (at least I didn’t have to). See photo for reference.
This should fix the permissions issue, because on my Mac running Mountain Lion I was unable to edit the permissions in the get info dialog window even after "unlocking" the drive. -
I get an error when trying to open "The application Creative Cloud can't be opened. -1712
I get an error when trying to open "The application Creative Cloud can't be opened. -1712
The application Install.app can't be opened. -1712
-
Getting an error when trying to Publish the Schedule back to ERP in PS
Hi,
I am trying to release the Approved schedule back to ERP(“Release Schedule” option) from PS workbench but getting error messages like:
Error 1: PS\messageDictionary.txt doesnot exist
Error 2: An error occurred when trying to execute script:
c:\scp\8.12.1\ps\bin\..\..\commom\start\FileUploader_ps.bat C:\scp\8.12.1\ps\bin\..\..\..\data_stpre\5 5-gzip
Please advice
regards,
PraveenaCheck the installation. Go to start --> All programs. verify that the folder avaialble is 'Oracle Supply Chain Planner'.
If you have JD Edward supply chain planner then you will not be able to publish back the schedule. There are 2 installers involved. In case of Oracle installer, it is silent installation and the instllation path is picked up from the profile option 'MSC:PS/SNO Installation path'.
In case of JD Edward installer, the PS installation wizard will open and you need provide the path. Remove PS from you client machine, clear java cache and try to download any model. If you have Oracle installer then model will open directly. If you get JD Edward installer, it will pen the wizard and you need to carry out installation steps manually. If you get JD Edward installers, you will not be able to publish back the schedule. -
Getting wierd error when trying to getting phone IP address using AXL
I am current trying to use the AXL serviceability API to get phone IP
address information. I looked the developers guide and used the Java example to create a
SSL Socket connection to send the SOAP message to. The message I send is as follows:
POST: 8443/axl/ HTTP/1.0
Accept: application/soap+xml, application/dime, multipart/related, text/*
Host:localhost:8443
Authorization: Basic **************
Content-type: text/xml
SOAPAction: "http://schemas.cisco.com/ast/soap/action/#RisPort#SelectCmDevice"
Content-length: 610
<?xml version="1.0" encoding="utf-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding">
<SOAP-ENV:Header/>
<SOAP-ENV:Body>
<SelectCmDevice sequence="123456">
<CmSelectionCriteria>
<Class>Phone</Class>
<Model>255</Model>
<NodeName>10.248.140.11></NodeName>
<SelectBy>Name</SelectBy>
<MaxReturnedDevices>10</MaxReturnedDevices>
<SelectItems soapenc:arrayType="SelectItems[1]">
<Item>SEP001E4A3FAAAA</Item>
</SelectItems>
</CmSelectionCriteria>
</SelectCmDevice>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
The response I get back after about 30 seconds is as follows:
HTTP/1.1 400 Invalid URI
Content-Length: 0
Date: Wed, 12 Mar 2008 19:28:43 GMT
Server: Apache-Coyote/1.1
Connection: close
Could someone point me in the right direction as to what is going wrong?
Thanks
Mitchwell, getting closer. Of course you were correct. After changing it, I now get an http 500 error after a lenghty timeout.
POST /axl/ HTTP/1.0
Accept: application/soap+xml, application/dime, multipart/related, text/*
Host:localhost:8443
Authorization: Basic ***********
Content-type: text/xml
SOAPAction: "http://schemas.cisco.com/ast/soap/action/#RisPort#SelectCmDevice"
Content-length: 610
<?xml version="1.0" encoding="utf-8"?>
http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding">
Phone
255
10.248.140.11>
Name
10
SEP001E4A3FAAAA
HTTP/1.1 500 Internal Server Error
Content-Type: text/html;charset=utf-8
Content-Length: 4566
Date: Thu, 13 Mar 2008 02:15:53 GMT
Server: Apache-Coyote/1.1
Connection: close -
I am getting below error when trying to set the peer top peer replication
TITLE: New Publication Wizard
SQL Server could not create publication 'pub_default'.
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
Could not find stored procedure ''.
Changed database context to 'AdventureWorks2008R2'.
Warning: The "immediate_sync" property for publication "pub_default" has been changed to "true" because it is required by Peer-To-Peer.
Warning: The "allow_initialize_from_backup" property for publication "pub_default" has been changed to "true" because it is required by Peer-To-Peer. (Microsoft SQL Server, Error: 2812)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=11.00.2100&EvtSrc=MSSQLServer&EvtID=2812&LinkId=20476
BUTTONS:
OK
ThanksHi Ajay.G,
I’m writing to follow up with you on this post. Was the problem resolved? According to your description, the error 2812 usually occurs in the following situations.
1. The stored procedure which you executed does not exist.
2. If it does exist, it may occur that you do not fully qualify the procedure name. Or the procedure is not owned by the user attempting to execute it.
For more information, see:
How to: Configure Peer-to-Peer Transactional Replication (SQL Server Management Studio).
There is a similar issue about error 2812, you can try to clean up the database from any replication settings on the publisher and distributor, then recreate publication and check if it can succeed, You can review the following post.
http://www.sqlservercentral.com/Forums/Topic613590-291-1.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
Now getting runtime error when trying to get on usairways site. Help
This is a new occurrence in last week. Syncs iPad with no help error message still remains. No issue with other sites.
What part or function of the site is failing for you? I have no problems connecting via Safari to the main site nor in searching for flights. If you can be more specific about where things are breaking down for you, we may be able to offer suggestions. Knowing what version of iOS is running on your iPad will also help.
Regards. -
Any advice for not being able to download the creative cloud installer?
Lisalynn33 please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for information on how to resolve download errors.
-
cant complete your itunes request unknown error occurred (0x80092013)
cant complete your itunes request unknown error occurred (0x80092013)
-
I am getting an error when trying to install the current updates.
Why don't you try telling us what the error is...
Check this document for troubleshooting information: http://support.apple.com/kb/ts3694 -
Error when trying to access the RBAC User editor and Message tracking
Hi,
I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue.
https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
I then checked the event logs on the server and saw the below error logged;
Current user: 'Domain/Server Services Accounts/administrator'
Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
--- End of inner exception stack trace ---
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.default_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
Any ideas as to what the above event log is specifically referring to?Hi,
From your description, I would like to clarify the following thing:
If you want to search message tracking logs, the account you use should be a member of the role groups below:
Organization Management role group, Records Management role group, Recipient Management role group.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
I keep getting unknown error when trying to download apps
Does anyone know why I keep getting unknown error when trying to download apps?
does it says anything else than unknow error?
try going to settings>store, click on apple id and then sign out. Restart iphone and sign back in and try downloading again -
Keep getting 5002 Error when trying to Sign In
Hello,
I created a new @me.com address today for a seperate Apple ID account. I am needing to sign into the iTunes Store, but I keep getting a response that says:
"We could not complete your iTunes Store request. An unknown error occurred (5002)."
Any ideas as to what's going on here?
I also took a screen cap of the issue:
Thank you for the help!
MarcusThank you for your response Carolyn; however, that article does not fix my problem. I am getting this error when trying to sign into the iTunes Store on my Mac.
I get the same problem when signing into the Store on the iPad or iPhone. I simply can't log in, but when I go to iCloud.com or the Apple ID login on Apple.com, it works.
Marcus -
I keep getting an error when trying to update an app- cannot connect to store. I logged out from my account and tried to log back in and got the same error. I am doing all this from my phone since I no longer own a personal computer (only work) since I use iCloud and I tunes match
YAY!!! Saved it in my Mac's Firefox Bookmarks for easy future access!
Hope you are having a lovely afternoon today! I'm about ready to go bobo....I have an early meeting, and I don't want to oversleep! The nice part is that I work remotely, so I only have to wake up 15 minutes or so before the meeting.... I don't even use an alarm clock anymore (really, my iPhone alarm, which is much more pleasant), unless I have to get up at 6:30 or something....
TMI?
GB
Maybe you are looking for
-
trying to register my new macbook pro ... purchased 3/9/2013 ... registration web-app renders an error claiming the date I've entered is not correct for the serial number I've provided ... bought it new ... paid large some o'cash ... want to register
-
Hey there, For some reason on my blog in BC I can't bold or italicize text; it shows up in the bold module but upon preview on the actual site they do not show up. Any idea what is happening? Underlining however does work. Thanks!
-
Simuntaneous arming of counters
Hey guys, I am trying to configure seven counters on a PCI6602 to simulate a quadrature encoder signal(Channels A,A',B,B',Z,Z') and a regular encoder signal(Channel X). The quad encoder signal works fine and was done by setting up Pulse Train Generat
-
Is there some kind of issue with these as I receive several errors during import? Also I can not open any D800 NEF-files in Photoshop Elements 9 and as I googled this, I received answers about some Camera Raw version which is not compatible with Niko
-
Bless You, Camera Raw Engineers
Sometimes it's the little things that count - really. I have a favorite lens - a Canon 28-135 zoom - which I've used forever and simply love. It's an extraordinarily good copy and even though it's a zoom it produces images that would be good even fr