Why do I keep losing the signal for my phone

ive been having problems recently getting a signal on my phone.Ive not had a signal at my home in the last 18 hours and its a pain .CAN ANYONE HELP ????

You may have a problem with the file that stores toolbar customizations. For details on how to fix that see https://support.mozilla.com/kb/Toolbar+keeps+resetting

Similar Messages

How can I get my Mountain Lion more stable on the internet? It keeps losing the signal. Lion is solid as a rock on my other Macbook using the same router.

I downloaded Mountain Lion on my Macbook Air, and it works without a hitch except for internet connectivity. It keeps losing the signal. My Macbook using the same connection is solid as a rock and never loses the connection. Is there something I can do? Since my Macbook works weell under exactly the same conditions and if memory serves so did my Macbook Air with Lion before I downloaded Mountain Lion, none of the usual fixes seem to apply.
Applehank

I have the same problem, I think. I dont lose wifi signal, the mba stays connected to the router the whole time. Pings also seem unaffected by this problem. The problem is that web pages seem to load intermittently, in other words, it loads a page in 2 minutes. It loads:
the first 25% in the first 5 seconds
the next 25% in the next 50 seconds
the next 25% in the next 5 seconds
the last 25% in the last 50 seconds
Its quite annoying considering this can be as simple a page as goolge search results or even google.com.
I thought it was my ISP and i even made a big racket about it, switched ISPs and I have the same problem.
With the previous ISP I had a cisco router. This new ISP supplied their own modem/wifi. That doesnt seem to be the problem.
Im thinking its a config issue on my mba. I have the latest updates to ML.
Any ideas?

Keep losing the signal while call is running

Dears,
my problem is in my new phone Z3 Dual, every thing in the phone is good and running properly but i noticed one problem recently.
when i receive calls or starting calls, some time the signal is suddenly lost and call broke and i lose the phone call then it works again.
my sim is nano sim and works just fine.
kindly advise

This is what I would do @samer711
1. contact your carrier/network and ask for any network coverage issues
2. get a brand new NANO SIM card, don't get a regular SIM card and cut it
3. repair the phone with PCC or Bridge
4. DO NOT install any antivirus or taskillers or battery apps, sweepers etc.
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Why do I keep losing the icons in my navigation tool bar?

I don't know that more details are necessary. I looked up a moment ago to click on my Add Bookmark icon and it was gone, along with all the rest. This happens frequently. Why won't they stay in place?

You may have a problem with the file that stores toolbar customizations. For details on how to fix that see https://support.mozilla.com/kb/Toolbar+keeps+resetting

Help needed!! Why do I keep losing the connection to my cRIO?

Hi All,
I've got a real time system with the following setup.
I have got a cRIO out in the field running a real time application that accquires data from various thermocouples and sends the data to the my host computer over a wireless radio link. I am using a wireless ethernet modem with a data transfer rate of 100 kb/sec. The modem is being shared by 12 other radios also transmitting data to the host PC.
So, basically, I've got the host PC on one end and 13 field computers (one of which is my cRIO running a real-time application) on the other end. The 13 field computers are sending data to the host PC over wireless radio links utilizing a single wireless ethernet modem. The data from the 13 radios is placed on a que and the modem cycles through the que enabling the data from each radio to pass through one at a time.
My real time application is sampling the thermocouple data every 1 sec and sending it across to the host application via a shared variable
The host PC is also running an application that acts as the user interface.
My problem is this:
My system runs OK for a couple of minutes and then suddenly I lose the conection to the cRIO. Once this happens, I have to manually reset the cRIO (i.e. cycle the power back on) to re-establish the connection. This is both tiresome and inconvenient as the system needs to be able to run continuously for several hrs.
What could be the possible causes for this loss in connection? Is it possible that a clash between signals causes the modem to drop the connection to the cRIO? If so, is there a way to monitor the connection between the host and cRIO and automatically reset the cRIO in the event of a lost connection?
Any help would be highly appreciated.
Thanks,
Taizoon

Thanks for the suggestions. I think I was overflowing my FIFO so it may be a memory issue. However, it dies hard when I place a probe on my FIFO read data. Since this seems to be repeatable, NI may be able to look into it.
Anyways, I'll try some of my own troubleshooting and your suggestions then if I'm still having problems I'll be sure to check back.
CLA, LabVIEW Versions 2010-2013

Why do I keep losing the Apps Store icon from my Home Screen?

It seems that after almost every sync I lose the Apps Store icon. I have to set up as a new iPhone then load all my data again.
Why would the Apps Store icon just disappear? It's not like I deleted it as I would with an unused/unwanted app.
Running all the latest updates. Not jailbroken and never has been.
Puzzling . . .
Ian

Has it simply been moved to another home screen? Flick across the home screen to cycle through them. The only other way for it to disappear is if you have toggled off in Restrictions (Settings > General > Restrictions). If it's not turned off in Restrictions, it must be on one of the home screens, there's no way to remove any of the Apple-provided apps. To get it back to the front home screen, tap-and-hold on any icon, then when they all start to wiggle, drag it where you want it.
Hope this helps...

Why does Itunes keep losing the location of music files?

Itunes will lose the location of the music files. they clearly listed under the right album and proper order but when you select a song a exclamation mark shows up and a window pops up asking me where it can be located. I don't know, Itunes lost it, I haven't done any maintenance work to the hard drive that I know of other than clean the registry on my firefox search engine.

The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, one of its parent folders, or the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place. In the case of a library moved from one system to another there are also potential permissions issues. See Repair security permissions for iTunes for Windows.
Select a track with an exclamation mark, use Ctrl-I to Get Info, then click No when asked to try to locate the track. (Due to a bug in iTunes 12 you currently have to say No twice!) Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, a folder renamed, or a drive letter has changed, it should be possible to reverse the actions. If the difference between the two paths is an additional Music folder in one path then this is a layout issue. I can explain further if that is the case.
In some cases iTunes may be able to repair itself if you go through the same steps with Get Info but this time click Locate and browse to the lost track. It may then offer to attempt to automatically fix other broken links.
If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
i may be able to give some more focused advice once there is a clearer picture of where things are.
tt2

Why do i keep losing service, why do i keep losing service

Why do i keep losing service on my i phone 4

Not sure. What did your carrier say when you contacted them?
Also, update your iOS: Settings > General > Software Update

My iMac keeps losing the connection to my chosen Airport Wi-Fi network. Anyone know why this happens?

My iMac keeps losing the connection to my chosen Airport Wi-Fi network. Anyone know why this happens?

Close all Apps and see if Activity Monitor shows any processes runnung.
Not that I think this is the cure but have you tried these resets:
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset.
PRAM RESET
Zap the PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

When exporting files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might do 524 images but not the full 600. I've tried resetting Aperture, it's the latest version etc etc. Help please!

If anyone can help me with this I would be seriously grateful.
When exporting mutliple files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might make 524 pages but not the full 600. I've tried resetting Aperture and its persmission and am using the latest version of 3.
I have 3600 images which I need to upload as sublfolders, each with their own URL and at the moment Aperture is dropping of anything from 1 to 90 images.
This is critical as people need to see each and every on of these images online. So if a file has 600 photos in it, Aperture should make a URL with 600 full image pages. And this is what it's not doing. On small files, say 30 or so it seems to work well, it's when it gets to more than that the problem starts.
I've used Aperture in the past under previous versions and not had this problem.
Any help would be great.
Thanks.
Bob.

Hi Jack,
Thanks for responding (as it seems as though no one else has been able to provide any insight as of yet)! Not sure if you saw my recent post, but the version of Aperture on the 2008 MacBook has been upgraded to 3.1.2 (not sure how; I bought it in 2009, but only have OS X 10.5.8... which apparently can't house 3.1.2 of Aperture, but hey, like many other anomalies i'm encountering, I'm no longer surprised!). I am unable to upgrade it any further, as it warns me that my OS X does not fit the requirements. I exported the projects as libraries; however, like I posted before, apparently these are from too old of a version for the new Aperture (3.3.1) to handle and import.
It's getting to the point where I'd almost pay to upgrade the OS X on my previous MacBook (10.5.8) to something newer in order to THEN update Aperture to a newer version; however, my previous MacBook simply cannot handle this (the specs are awful -- hence my decision to save up and upgrade to the newest MBP with Retina).
I've spent hours upon hours transferring files, libraries as projects, previews, versions, even masters (though, apparently some of them aren't accessible?) with no luck. I've rebuilt the library and reprocessed everything. And this is all after having to return one MBP already since Aperture 3.3.1 is glitch-y as it is, and froze everything for having a "managed library". So, now that I know that I have to deal with a referenced library in Aperture... I just need to actually transfer my previous library to my new one (hopefully WITH adjustments since these are years worth of photos and work).
Again, any help is appreciated. I've lost enough sleep, time, and vision health over this at this point.
Also, I know Migration Assistant is an option, I was told that it wouldn't work properly anyway because of the different operating systems, and the potential for problems.

Why does my iPad keep losing the wifi every few minutes?

Why does my iPad keep losing the wireless connection every few minutes?

Could be
1 the routers firmware require an Update
2 the iPad is defect

Why do I keep getting the message "key not valid for use in specified state"?

why do I keep getting the message "key not valid for use in specified state"?

You need to deal with Adobe Customer support. This is a Photoshop User forum the is also one for LR may be some on over there has encountered you problem Photoshop Lightroom

HT1657 My download keeps freezing, and I have to buy it over and over again and it wastes money. I have now rented my movie 4 times and it still won't finish downloading. Why can't I get the rental for free if it keeps doing this?

MY DOWNLOAD KEEPS FREEZING AND I HAVE TO KEEP BUYING IT OVER AND OVER AGAIN. IT'S WASTING MY MONEY. I HAVE NOW RENTED MY MOVIE 4 TIMES AND IT STILL WON'T FINISH DOWNLOADING. WHY CAN'T I GET THE RENTAL FOR FREE IF IT KEEPS DOING THIS? CAN YOU PLEASE HELP? THANK YOU.

Please turn off your caps lock. All caps indicates shouting, is considered rude and is difficult to read. Many will not read such posts.
If it doesn't finish downloading then just click Store>Check For Available Downloads
There is no need to keep re-buying it.

Why do I keep losing my "notes"?

Why do I keep losing my "notes"?

I have been losing notes off and on for almost 2 years now. Contract is almost up--will probably switch over to a Galaxy next time.
Notes are extremely important to me. I have NO idea why they disappear. Here is what I learned.
Originally the notes were backed up to my Yahoo account as many of you found out. When you lose one, you will find it in your Notes folder in your Yahoo email account. Similar backup with Gmail.
I started using iCloud for notes a month ago. The huge advantage is that you can compose or paste in large amounts of text from your desktop device, and they are pushed immediately to the iPhone. Editing is a breeze now.
But wait—what happens if you lose a note? I lost my main shopping list this morning while at Home Depot. iCloud is immediately updated, and the note is erased! No backup. So I have resorted to drafting emails of each note which are then saved in iCloud email Draft folder. Works for now, but a horrible workaround for what should be a robust app. Shame on you Apple.

Why do I keep losing signatures in Apple Mail after I select a signature in Preferences?

Why do I keep losing signatures in Apple Mail after I select a signature in Preferences?

When you connect your Mac back up to the Exchange server, it will “sync” what is on the server to your Mac, losing all those older emails. Don’t reconnect until you have moved them.
To move them, Drag them from the Exchange folders on Mail and into an iCloud folder. The emails will then be stored on iCloud instead of on the exchange server.
You could also just create mailboxes on your Mac and drag them into that. They wouldn’t be accessible to other devices, but you’d have them on your Mac.
To create new Mailboxes, Click the Add ( + ) button at the bottom of the Mailbox list and choose New Mailbox…
You can choose where that folder is stored, either under On My Mac for a local mailbox, or in your iCloud account which will make a folder on the iCloud server.
In the future, you need to start moving your emails to those independent mailboxes as you file them, and set up a rule that will move anything older than 50 days into a “catch-all” Mailbox you create on that same location (either On My Mac or iCloud). Mail Preferences, Rules.

Why do I keep losing the signal for my phone

Similar Messages

Maybe you are looking for