Why do I loose my wireless connection​?

Can someone tell me why I loose my wireless connection from my laptop when I go to make a phone call with my phone?
Solved!
Go to Solution.

Your phone is probably on the 2.4Ghz frequency which is the same frequency wireless routers operate on. Try changing the channel on the router to one that is far enough away from the phone's frequency so they don't interfere with each other.
To change the channel on the router:
 In Internet Explorer, type 192.168.1.1 into the address bar
On the login page that comes up, type admin for the username and password1 for the password (ignore the dots)
Click Change Wireless Settings under Quick Links in the My Router column of the front page.
Under option 3. Channel, select a number from 1 - 11 then click Apply at the bottom of the page.
Click Apply again to save the changes if it asks.
 It is pretty much trial and error in determining which channel will be furthest from your phone's frequency, and you might even not find a channel that keeps your wireless connection up every time your on the phone. I had the same problem with my own cordless phone and a linksys router that I ended up having to purchase a new phone in the 5.8Ghz range to keep my connection. With that said, I hope you have better luck then me with this situation.
Brennoko
Verizon Telecom
Fiber Solutions Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Similar Messages

  • I have a dv8t-1000 and the wlan and treble keep going on and off. I loose the wireless connection.

    I need to know how to open the laptop to replace the card that controls the wlan and treble. I tried to find a manual to show how to get the laptop open and then be able to get the card number so I can order one. I have removed the screws but can't get it appart. Can you tell me the type of card that I would need to resolve the problem so I don't loose the wireless conection every 5 minutes.
    Thanks
    highdiver

    The Maintenance and Service guide, which you can find here, can show you how to replace your wlan card.
    I am an employee of Hewlett Packard.
    - - Please mark Accept As Solution if it solves your problem so others can more easily find the answer - -
    - - Please click the Kudos star if you would like to say thanks - -

  • Why my aptv3 loose all wifi connections?

    Since 2 weeks ago, my aptv3 loose wifi conection constantly. Also is unable to find any wifi (the signal drops from full to just one bar). It needs to reset and works again... just for 5/6 minutes, then again.
    Any solution?

    Ok read your post.  ATV is not "losing the connection" the signal is not getting to ATV.  Really the best thing to do would be to switch to a wired connection.  Streaming video over WiFi rarely works that well.  It will save you a lot of headache.  If you will not conceder that then you need to figure out why the WiFi signal is either dropping out, or being interfered with.

  • Every time the home telephone rings, I loose the wireless connection

    My airport express works perfectly, however when the telephone rings I loose connection. Does anyone know how to fix this?

    I learned recently that even some "5.8 GHz" phones actually use 2.4 GHz for some of their traffic, so make sure you study the specs if you want your 5.8 GHz to not interfere with your 2.4 GHz network.
    Just to be more clear:
    AirPort Express the old AirPort Extreme always use 2.4 GHz.
    The new AirPort Extreme uses 2.4 GHz when in b/g/n mode and 5 GHz when in a/n mode.

  • Why does my ipod lose wireless connection

    So I bought this iPOD touch 3g, 8GB that was recently "refreshed" from Best Buy (i bought it from a private party after he received it  back). After charging it up I downloaded an app that I use to control a sonos music player. Problem is that the iPOD will not stay connected to my network. My wireless is a month old Netgear 802.11a/b/g/n router and all of the laptops in the house connect perfectly. the iPOD touch cuts in and out every minute or two.I went into the settings/general folder and did a network settings reset, but that did not cure the problem.Any suggestions?

    this could have countless reasons but it might be your to far from router your router might be haveing electrical problems or your ipod is trying to join to many networks

  • My iMac and iPad keep loosing the wireless connection to Airport Extreme issue started after I installed Lion?

    Since installing Lion, I have been loosing my connection to airport Extreme after I have put my IMac in sleep mode.  My Ipad is also loosing the connection.  This issue started since the installation of Lion, is anyone else experiencing the same thing?

    I've had that problem on my macbook running 10.5.8 for a few years. Sometimes it's worse than others. No other computer in my house has this problem.

  • [SOLVED] Loosing Wireless Connection

    I am constantly loosing my wireless connection while I am trying to download something, usually I don't reach 60 MB and it's gone.
    I am also loosing my connection while browsing the internet for 2-3 hours.
    In both cases it reconnects after 2 minutes ,sometimes more.
    I still have my IP address during these 2 minutes.
    I tried different connection methods : wifi-menu, netctl, NetworkManager , manually with wpa_supplicant and dhcpcd(or dhclient) but they all lead to loosing my connection after a time.
    iwconfig
    enp11s0 no wireless extensions.
    wlp2s0 IEEE 802.11abgn ESSID:"FRITZ!Box Gastzugang"
    Mode:Managed Frequency:2.412 GHz Access Point: AccesPointX
    Bit Rate=52 Mb/s Tx-Power=19 dBm
    Retry long limit:7 RTS thr:off Fragment thr:off
    Power Management:off
    Link Quality=40/70 Signal level=-70 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:1698 Invalid misc:454 Missed beacon:0
    lo no wireless extensions.
    ip addr show
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    valid_lft forever preferred_lft forever
    2: enp11s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether XX:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff
    3: wlp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether XX:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff
    inet 192.168.179.32/24 brd 192.168.179.255 scope global wlp2s0
    valid_lft forever preferred_lft forever
    sudo journalctl -u NetworkManager.service
    -- Reboot --
    Mar 15 18:05:03 Alik NetworkManager[161]: <info> NetworkManager (version 0.9.8.8) is starting...
    Mar 15 18:05:03 Alik NetworkManager[161]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
    Mar 15 18:05:03 Alik NetworkManager[161]: <info> WEXT support is enabled
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
    Mar 15 18:05:09 Alik NetworkManager[161]: keyfile: parsing Auto FRITZ!Box Gastzugang ...
    Mar 15 18:05:09 Alik NetworkManager[161]: keyfile: read connection 'Auto FRITZ!Box Gastzugang'
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> monitoring kernel firmware directory '/lib/firmware'.
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> rfkill2: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy0/rfkill2) (dri
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> rfkill0: found WiFi radio killswitch (at /sys/devices/platform/dell-laptop/rfkill/rfkill0) (platform driver dell-laptop)
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> WiFi hardware radio set enabled
    Mar 15 18:05:09 Alik systemd[1]: Started Network Manager.
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> WiFi enabled by radio killswitch; enabled by state file
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> WWAN enabled by radio killswitch; enabled by state file
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> WiMAX enabled by radio killswitch; enabled by state file
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> Networking is enabled by state file
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): using nl80211 for WiFi device control
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): driver supports Access Point (AP) mode
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): new 802.11 WiFi device (driver: 'brcmsmac' ifindex: 3)
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): exported as /org/freedesktop/NetworkManager/Devices/0
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): bringing up device.
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): preparing device.
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): deactivating device (reason 'managed') [2]
    Mar 15 18:05:09 Alik NetworkManager[161]: <warn> failed to allocate link cache: (-26) Protocol mismatch
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): carrier is OFF
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): new Ethernet device (driver: 'tg3' ifindex: 2)
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): exported as /org/freedesktop/NetworkManager/Devices/1
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): bringing up device.
    Mar 15 18:05:10 Alik NetworkManager[161]: <info> (enp11s0): preparing device.
    Mar 15 18:05:10 Alik NetworkManager[161]: <info> (enp11s0): deactivating device (reason 'managed') [2]
    Mar 15 18:05:10 Alik NetworkManager[161]: <info> Added default wired connection 'Wired connection 1' for /sys/devices/pci0000:00/0000:00:1c.5/0000:0b:00.0/net/enp11s0
    Mar 15 18:05:10 Alik NetworkManager[161]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring...
    Mar 15 18:05:10 Alik NetworkManager[161]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring...
    Mar 15 18:05:11 Alik NetworkManager[161]: <warn> Couldn't acquire object manager proxy: Error calling StartServiceByName for org.bluez: GDBus.Error:org.freedesktop.systemd1.Loa
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> wpa_supplicant started
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0) supports 4 scan SSIDs
    Mar 15 18:05:11 Alik NetworkManager[161]: <warn> Trying to remove a non-existant call id.
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: starting -> ready
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: ready -> disconnected
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0) supports 4 scan SSIDs
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Auto-activating connection 'Auto FRITZ!Box Gastzugang'.
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) starting connection 'Auto FRITZ!Box Gastzugang'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> (wlp2s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> NetworkManager state is now CONNECTING
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) scheduled...
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) started...
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) scheduled...
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) complete.
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) starting...
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> (wlp2s0): device state change: prepare -> config (reason 'none') [40 50 0]
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0/wireless): connection 'Auto FRITZ!Box Gastzugang' has security, and secrets exist. No new secrets needed.
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Config: added 'ssid' value 'FRITZ!Box Gastzugang'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Config: added 'scan_ssid' value '1'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Config: added 'psk' value '<omitted>'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) complete.
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Config: set interface ap_scan to 1
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: disconnected -> inactive
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: inactive -> associating
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: associating -> associated
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: associated -> 4-way handshake
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: 4-way handshake -> completed
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'FRITZ!Box Gastzugang'.
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) scheduled.
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) started...
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): device state change: config -> ip-config (reason 'none') [50 70 0]
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> dhclient started with pid 321
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Beginning IP6 addrconf.
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) complete.
    Mar 15 18:05:15 Alik dhclient[321]: Internet Systems Consortium DHCP Client 4.3.0
    Mar 15 18:05:15 Alik dhclient[321]: Copyright 2004-2014 Internet Systems Consortium.
    Mar 15 18:05:15 Alik dhclient[321]: All rights reserved.
    Mar 15 18:05:15 Alik dhclient[321]: For info, please visit https://www.isc.org/software/dhcp/
    Mar 15 18:05:15 Alik dhclient[321]:
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): DHCPv4 state changed nbi -> preinit
    Mar 15 18:05:15 Alik dhclient[321]: Listening on LPF/wlp2s0/XX:XX:XX:XX:XX
    Mar 15 18:05:15 Alik dhclient[321]: Sending on LPF/wlp2s0/XX:XX:XX:XX:XX
    Mar 15 18:05:15 Alik dhclient[321]: Sending on Socket/fallback
    Mar 15 18:05:15 Alik dhclient[321]: DHCPDISCOVER on wlp2s0 to 255.255.255.255 port 67 interval 6
    Mar 15 18:05:16 Alik dhclient[321]: DHCPREQUEST on wlp2s0 to 255.255.255.255 port 67
    Mar 15 18:05:16 Alik dhclient[321]: DHCPOFFER from 192.168.179.1
    Mar 15 18:05:16 Alik dhclient[321]: DHCPACK from 192.168.179.1
    Mar 15 18:05:16 Alik dhclient[321]: bound to 192.168.179.32 -- renewal in 415231 seconds.
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> (wlp2s0): DHCPv4 state changed preinit -> bound
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> address 192.168.179.32
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> prefix 24 (255.255.255.0)
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> gateway 192.168.179.1
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> nameserver '192.168.179.1'
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> domain name 'fritz.box'
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Commit) started...
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> (wlp2s0): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Commit) complete.
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> (wlp2s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> NetworkManager state is now CONNECTED_GLOBAL
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> Policy set 'Auto FRITZ!Box Gastzugang' (wlp2s0) as default for IPv4 routing and DNS.
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> Writing DNS information to /usr/bin/resolvconf
    Mar 15 18:05:18 Alik NetworkManager[161]: <info> Activation (wlp2s0) successful, device activated.
    Mar 15 18:05:18 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) starting DHCPv6 as requested by IPv6 router...
    Mar 15 18:05:18 Alik NetworkManager[161]: <info> Activation (wlp2s0) Beginning DHCPv6 transaction (timeout in 45 seconds)
    Mar 15 18:05:18 Alik NetworkManager[161]: <info> dhclient started with pid 380
    Mar 15 18:05:18 Alik dhclient[380]: Internet Systems Consortium DHCP Client 4.3.0
    Mar 15 18:05:18 Alik dhclient[380]: Copyright 2004-2014 Internet Systems Consortium.
    Mar 15 18:05:18 Alik dhclient[380]: All rights reserved.
    Mar 15 18:05:18 Alik dhclient[380]: For info, please visit https://www.isc.org/software/dhcp/
    Mar 15 18:05:18 Alik dhclient[380]:
    Mar 15 18:05:18 Alik dhclient[380]: Listening on Socket/wlp2s0
    Mar 15 18:05:18 Alik dhclient[380]: Sending on Socket/wlp2s0
    Mar 15 18:05:19 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 1060ms.
    Mar 15 18:05:20 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 2120ms.
    Mar 15 18:05:22 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 4380ms.
    Mar 15 18:05:26 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 9150ms.
    Mar 15 18:05:35 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 18730ms.
    Mar 15 18:05:54 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 36040ms.
    Mar 15 18:06:03 Alik NetworkManager[161]: <warn> (wlp2s0): DHCPv6 request timed out.
    Mar 15 18:06:03 Alik NetworkManager[161]: <info> (wlp2s0): canceled DHCP transaction, DHCP client pid 380
    Mar 15 18:06:03 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
    Mar 15 18:06:03 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 4 of 5 (IPv6 Configure Timeout) started...
    Mar 15 18:06:03 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
    Mar 15 18:11:47 Alik NetworkManager[161]: <warn> Connection disconnected (reason 2)
    Mar 15 18:11:47 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: completed -> disconnected
    Mar 15 18:11:47 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: disconnected -> scanning
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: scanning -> authenticating
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: authenticating -> associating
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: associating -> associated
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: associated -> 4-way handshake
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: 4-way handshake -> completed
    Not surprisingly , everything works fine on Windows.
    Thanks for the help
    Last edited by ollen (2014-03-16 00:25:44)

    first of all I stopped my NetworkManager.service and then :
    sudo wpa_supplicant -Dnl80211 -iwlp2s0 -c/etc/wpa_supplicant/wpa_supplicant.conf &
    Successfully initialized wpa_supplicant
    wlp2s0: CTRL-EVENT-SCAN-STARTED
    wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    wlp2s0: Trying to associate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    wlp2s0: Associated with XX:XX:XX:XX:XX
    wlp2s0: WPA: Key negotiation completed with XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP]
    wlp2s0: CTRL-EVENT-CONNECTED - Connection to XX:XX:XX:XX:XX completed [id=0 id_str=]
    and then I run
    dhclient wlp2s0
    but no output after this command but I get my IP address
    I also ran this command
    dhcpcd wlp2s0
    and the output is
    dhcpcd[2163]: version 6.3.1 starting
    dhcpcd[2163]: DUID XX:
    dhcpcd[2163]: wlp2s0: IAID XXX
    dhcpcd[2163]: wlp2s0: soliciting an IPv6 router
    dhcpcd[2163]: wlp2s0: rebinding lease of 192.168.179.32
    dhcpcd[2163]: wlp2s0: leased 192.168.179.32 for 864000 seconds
    dhcpcd[2163]: wlp2s0: adding route to 192.168.179.0/24
    dhcpcd[2163]: wlp2s0: adding default route via 192.168.179.1
    dhcpcd[2163]: forked to background, child pid 2558
    a little bit of
    journalctl -u wpa_supplicant.service
    -- Reboot --
    Mar 15 18:05:09 Alik systemd[1]: Starting WPA supplicant...
    Mar 15 18:05:11 Alik systemd[1]: Started WPA supplicant.
    Mar 15 19:53:19 Alik wpa_supplicant[289]: Successfully initialized wpa_supplicant
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Reject scan trigger since one is already pending
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Trying to associate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Associated with XX:XX:XX:XX:XX
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Key negotiation completed with XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-CONNECTED - Connection to XX:XX:XX:XX:XX completed [id=0 id_str=]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=2
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Trying to associate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Associated with XX:XX:XX:XX:XX
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Key negotiation completed with XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-CONNECTED - Connection to XX:XX:XX:XX:XX completed [id=0 id_str=]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: rfkill: WLAN hard blocked
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=3 locally_generated=1
    Mar 15 19:53:19 Alik wpa_supplicant[289]: rfkill: WLAN hard blocked
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Reject scan trigger since one is already pending
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: SME: Authentication request to the driver failed
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: No network configuration found for the current AP
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=3 locally_generated=1
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: Trying to associate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: Associated with XX:XX:XX:XX:XX
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: WPA: Invalid EAPOL-Key MIC when using TPTK - ignoring TPTK
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: WPA: Could not verify EAPOL-Key MIC - dropping packet
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: Authentication with XX:XX:XX:XX:XX timed out.
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=3 locally_generated=1
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: WPA: 4-Way Handshake failed - pre-shared key may be incorrect
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="FRITZ!Box Gastzugang" auth_failures=1 duration=10
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="FRITZ!Box Gastzugang" auth_failures=2 duration=20
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: Reject scan trigger since one is already pending
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: No network configuration found for the current AP
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=3 locally_generated=1
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Last edited by ollen (2014-03-16 00:17:44)

  • Ever since I installed Norton 2008, I loose my wireless c...

    Ever since I installed Norton 2008, I loose my wireless connection every night.  I have to take my internet cable out the router and plug it into my desktop.  Once the desktop reads the internet address, I then plug it back into the router and go through easy link advisor to set it up.  Can anybody tell me why this is happening and what I can do to prevent this from happening.
    Thanks

    Might be possible that Antivirus is blocking the wizard to scan the network ......
    Disable the firewall & see if it is working ....

  • Sure way to kill Wireless Connection

    Hello,
    while debugging my problems with loosing my wireless connection I found out a sure way to kill it: Just start a program like ethereal for the ethernet in promiscuous mode. Kills my wireless connection for sure and only a reboot helps.
    Has anyone seen this problem as well?
    -b

    You are talking nonsense
    http://en.wikipedia.org/wiki/WPS

  • WVC54GCA Wireless connection drops off everyday.

    I have to restart the camera everyday beacuse it looses it wireless connection. I don't have a lenght of time it stays connected. I'm using a Linksys WAP54G connected to a RVS4000 router.  I see others are haveing the same problem.  My laptop stays comnnected so I don't think it is the WAP. 

    You shouldn't have to do this, if you give each camera a fixed IP.
    I have 4 cameras, I'm using one on a cable and the other 3 wirelessly.
    The wireless ones  all drop off and fall asleep at anytime during the day/night, but the one on thr cable doesn't.
    I think, it's a communications/handshaking problem within the wireless network. When the wireless signal fluctuates too much, the cameras don't come back.
    I solve this with a ping to the cameras. The first ping usually comes back dead with 100 % packet loss.
    The second ping may take 3000 ms.
    The third ping usually gets them back to normal, around 2-3 ms.
    All is good after that (for a while).
    I don't seem to have that problem, when the cameras are streaming. Sometimes I get a short break in the stream after a while. I've put this down to heat developing in the camera, but I'm not sure.
    Anyway, Ithink, a static IP is a must for these cameras, if you use them wirelessly.
    Cheers

  • Why can't I use two 8500 wireless printers on one router? The 8500 A910 looses it's connection.

    Why can't I use two 8500 wireless printers on one router?  The 8500 A910 looses it's connection after awhile.

    What router?  What operating system?  Are they both A910s?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Why does everyone at my work loose their internet connection when I update Adobe Cloud Products?

    Why does everyone at my work loose their internet connection when I update Adobe Cloud Products? We are on a 20mb broadband connection and there is around 20 people using computers at my work but when I start my Adobe Cloud Product update or when I try and download my Adobe Cloud Product everyone at my work looses their internet connection and so do I. But the update keeps downloading and installing.

    I am sorry FooWingLi but the difficulties you are describing sounds more like a local network configuration issue.  I would recommend working with your I.T. department to investigate this matter.

  • Wireless users are loosing the internet connection....

    Dear All, My wireless users are loosing the internet(http and https) connection many times per day. I just check the ports configuration in the switch, but The problem persist. The device is a Cisco Aironet 1130 AG. Someone have some idea???
    Sent from Cisco Technical Support iPhone App

    Dear All, My wireless users are loosing the internet(http and https) connection many times per day. I just check the ports configuration in the switch, but The problem persist. The device is a Cisco Aironet 1130 AG.
    You are barking the wrong tree.
    Can you please elaborate further?
    I need to determine whether the clients are loosing WIRELESS connection or loosing WAN connection.  Two different things, two different directions to choose from.  
    The easiest way to determine is this:
    Presume you have 10 clients and half the clients are associated to one WAP and the other to the other WAP.  Your description states that all 10 clients would loose internet connectivity.  Is this correct?  If this is so, then we start with your switch and your WAPs.  How are the WAPs powered?  PoE or power injector?  Can you console into the WAPs?  Can you post the output to the commands "sh version" and "sh logs"?  How about the switch?  Can you console into the switch?  Can you post the output to the commands "sh version" and "sh logs"?

  • Looses wireless connection all the time.

    Hi
    I have a problem with my macbook pro, it looses its internet connection all the time. I don't know why since it's quite close to it's modem and other laptops that's more far away works fine. Any idea?
    Best regards Frankensten

    Does the router have the latest firmware? What happens when you are at a hotspot or a Starbucks?

  • Why do i keep loosing my wifi connection?

    why do i keep loosing my wifi connection?

    Did you already try the provided tips in this article about troubleshooting Wi-Fi connections? http://support.apple.com/kb/TS1398

Maybe you are looking for

  • Writing ASCII 0x81 to file with PrintStream

    Hello I am trying to export textfiles to an other system (IBM AS400). But for that i need to convert some special characters. It works fine with most of the characters (i simply replace the characters in the String that i write to the File (String.re

  • Problem with SAP Adapter (URGENT)

    Hello. We are trying to execute a SAP function via SAP Adapter and we receive the following exception... ANY IDEAS? An unexpected exception has been detected in native code outside the VM. Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC

  • Recovery LOG Script

    Hi we have copied our PRD system into a new box. The new system is not a standby system of the PRD system, just a copy. We have build a script that sends logbackups to tape and to this new system for recovery. Is there a way to recover the log on the

  • How does a BOOLE var. works in a true/false step?

    Hi experts, i am breaking my brain with a simple question, i guess if somebody can give me some light about this... I have a BOOLE variable defined in the worflow named RECH_PARC_ES_TOTAL. Before going to the true false step i execute this abap: DATA

  • I have an iPod touch 4g. Has all recent up dates but it will not me sync music from my library too my iPod icon at the top of the page.. Plz help

    I have an iPod touch 4g. Has all recent up dates but it will not me sync music from my library too my iPod icon at the top of the page.. Plz help this also happen with my iPhone 4.. I've used the same laptop for both and same iTunes account x