Why do I lose network connection with my standalone networked printer and have to reinstall it

I have a Laser Jet MFP M1530 printer that loses connection with the network. All the computers on the network have to delete the old configuration of the printer and reinstall it prior to it working. The printer is in a standalone configuration. Everything else on the network continues to work.

The Laser Jet MFP M1530 is a commercial product. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
You may find the Laserjet board here.
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Similar Messages

Why isn't my wifi connecting over a secure network? I typed the password in correctly, but it won't seem to connect.

Why isn't my wifi connecting over a secure network? I typed the password in correctly, but it won't seem to connect.

Tap Settings / Wi-Fi. Tap the blue circle with an arrow to the right of your network then tap: Forget This Network.
Restart the iPad. Tap Settings / Wi-Fi. Tap the network name again then type in your password.
If that didn't help, try here > Apple - Support - iPad - Wi-Fi Assistant
And try turning off your router for 5 minutes, then turn it back on. Try typing in the password again.

Zyxel pk500z router/wireless modem loses wireless connectivity with imac

My iMac loses wireless connectivity with wirelss internet from my Qwest ZyXel PK5000Z modem/router intermittently. Have to constantly reboot the router to allow my Imac and other Mac notebooks nto reconnect to wireless internet connection.

Suggest that you take one or more of Mac laptops down to the coffee place and connect there to check your performance. If you get a good connection there....as I suspect you will...you know the Macs are functioning correctly.
If the Macs perform well at the coffee place, you need to contact the ZyXel support folks for ideas on why the PK5000Z device is requiring constant restarts.
As you might imagine....on an Apple support forum, we are not going to be able to provide much help with a ZyXel product.

HT204380 Why won't my FaceTime connect with others?

Why won't my FaceTime connect with others?

Ok, so sometimes apple's servers may crash, temporarily. Just check the following site: http://www.apple.com/uk/support/systemstatus/
and it will notify you of any crashes. The link above is for the UK. Change to adapt to your country if you are outside of the UK. If your problem isn't listed I am sure it will be resolved within 24 hours. If this problem persists best thing is to contact apple.
Hope this helped :)

Hello, since the last update 10.6.8, my MacBookPro mid 2010 randomly loses the connection with my wifi AppleTV2

Hello,
Since the last update 10.6.8, my MacBookPro mid 2010 randomly loses the connection with my wifi AppleTV2 2. It works well with the connection between myPC and filiaire AppleTV2 els and between my iPhone 2 (3G and 4) and AppleTV2 butpoorly between the MacBookPro and AppleTV2.
Then I must quit and restart iTunes every time to continue to read my films. I repairedmy permissions, I restore my 2 AppleTV2 but that do nothing. I concluded that it is a loss of wireless connection. I do not know exactly what to do ...
If anyone can help

Thanks you rbrian, it seems that your solution is good because after some tests it works very well

Sharing a network connection with an Ipad2

I have a windows desktop connected to a network. I'd like to share the network connection with my Ipad while it is connected via the USB cable to the desktop. Is this possible? How?
Thanks,
Shaun

Well duh - no. I misread the question. I share the Internet connection from my iMac which is connected to the Internet via Ethernet cable to the modem.
The iPad shares my iMac's Internet connection through internet sharing. The iPad is not connected to my Mac with the USB cable. Brain clot! But is it not possible to share the connection via Internet sharing in the Windows world?
Sorry to the OP!

Why iphone 5S can't connect with itunes?

Why iphone 5S can't connect with itunes?

Did you try a reboot of the iPhone and the Mac?
Of course you have selected the items to be transferred in the Music tab of the Device in iTunes.
MJ

Why my IPAD2 sometimes loose connection with my router and I need to enter again the WPA password?

Why when my IPAD2 loose connection with the router sometime I need to enter again WPA2 password?

same problem here.
MBA (latest os), even my ip5 (latest ios) & ipm (also latest ios) looses the connecntion.
Ive tried to figure out what causes the problem - neither my xbox360 nor (and i guessed they will be the problem) the pcs here...
the connecntion runs well.. switching also (MBA-IP5-IPM).. but not for longer than an hour.. or even minutes. When the connection looses a high-frequency noise is followed by silence. A restart fix that problem and all devices streaming well... but not for long...
any suggestions?

HT1369 why is my ipod can not connect with the i tunes store and can not sync

Dear apple,
Please kindly help me because my ipod can not connect with the i tunes store and can not sync either

Follow through: iTunes for Windows: Device Connectivity Tests
That link, also contains other links that may be related to your problem and/or to your solution.
Hope this helps.

"Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility." Trying to format my iomega external HD for use with Mac

Hi. Trying to connect iomega ext. HD. i have to reformat for Mac. When i plug in & go to Disk Utility,the external shows up and i'm supposed to click "partition". When i do, a box comes up saying ""Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility." I quit and relaunched, same results. After googling my question, i came up with this:
"Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."
(Quitting and reopening Disk Utility does not help.)
The following also appears in Console log:
*** malloc[419]: Deallocation of a pointer not malloced: 0x290a410; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug : for architecture i386 object: ./Applications/iTunes.app/Contents/MacOS/iTunes malformed object (unknown flavor for flavor number 0 in LC_UNIXTHREAD command 27 can't byte swap it)
Workaround
Quit Disk Utility.
From the Finder's Go menu, choose Go to Folder....
Type the following, then click OK: /Library/Receipts
Temporarily remove these iTunes receipts from /Library/Receipts (sort the folder alphabetically as a list):
iTunes.pkg
iTunes4.pkg
You can put them on the desktop, for example. Do not remove iTunesX.pkg or iTunes Phone Driver.pkg.
Open Disk Utility and repair disk permissions again.
Quit Disk Utility.
Put the removed iTunes receipts back in /Library/Receipts.
Note: This issue does not affect Disk Utility's verify or repair disk features.
All seemed good, for a moment, until, upon going back to Disk Utility after removing itunes4.pkg and putting on desktop (i did not have itunes.pkg to remove) the same thing was happening. When i highlite my iomega ext. on left of page, disk perrmissions is grayed and does not allow me to click on it. Same problem from the start. Can somebody please help me out here? That would soooo awesome. Thanx!

i'm just scared i will do something wrong on my own and lose my data.
You shouldn't be scared of that, because you should already have backups. If you don't have backups, then backing up is the first priority.
Insert the Snow Leopard DVD and restart. When you hear the chime, hold down the C key and keep holding it until the Apple logo appears on the display. You should now see the language selection screen. Select your language, then choose Utilities > Disk Utility from the menu bar. In the Disk Utility window, select the external drive (not the internal). The drive may already have a data partition, in which case there will be another icon below the drive icon. Choose the drive icon, then select the Partition tab. Create a single partition with the default options (GUID partition table, Mac OS X Extended Journaled).
When the partitioning is done, select the startup volume on your internal drive in the DU window. Select the Restore tab. Drag the icon of the startup volume to the "Source" field. Then drag the icon of the newly-created volume on the external drive to the "Destination" field. Make sure you have this right. Then click the Restore button, and the data on your startup volume will be copied to the external drive.

I updated my 4s to IOS 8 and now it won't automatically connect with my Ford SYNC. I have to turn the phone off and then on again for it to connect.

I updated my 4s to IOS 8 and now it won't automatically connect with my Ford SYNC. I have to turn the phone off and then on again for it to connect.
Why is this? My husband's 4s is still on IOS7 and it still connects automatically.

I do not know if this will help.
For a limited time Apple will allow you to downgrade to 7.1.2. Hurry do not wait.
See brownox second post here:
Are there known problems with hdmi screen display and iOS 8?
and
http://www.gottabemobile.com/2014/09/17/downgrade-ios-8-to-ios-7/

LabVIEW network library with support for SSL, Ping and IPv6

I have posted on LAVA
an OpenG package that will install a LabVIEW network library with
support for SSL, Ping and IPv6.
Please go there if you are
interested to look it up.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Bob Y. wrote:
OK, but what is it and why should I use it? What need does it fulfill? I have been unable to find much documentation for this at the wiki page and maybe a couple of paragraphs here would help.
Thanks,
Bob Young
Hi Bob,
Yes, this info got burried. Basically, it's a tool for building LabVIEW-based software products. It is highly flexible/extensible and tries to fill the holes left by LabVIEW's built-in Application Builder. Here are some good links to more info:
OpenG Builder Homepage
OpenG Builder 1.0 Documentation
Thanks,
-Jim

TS1368 I have tried uninstalling and re-installing and my pc still will not connect with the iTunes Store. I have tried just about every suggestion on the web to no avail, please help.

I have tried uninstalling and re-installing iTunes and my pc still will not connect with the iTunes Store. I have tried just about every suggestion on the web to no avail, please help.

When I click on the store it just never opens, I do not receive any message. I try to "refresh the page" and nothing. While having the store selected I go to "help" and check for updates and i get a message; "The iTunes updatte server could not be contacted" and it prompts me to check my internet connection which is fine. None of the items under the "Store" respond with anything.
I ran a iTunes Diagnostics/ Under "Which Tests do you want to run" I check only "Network Connections" and the results that I receive is...
Network connectivity:
     Network interfaces, verified
iTunes Store connectivity:
     Internet connection, verified
     Secure link to iTunes Store, FAILED
Does this help?

I have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way f

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

How do I set up my airport express to make a connection with my Hp? I already have it set up for my mac laptop just not sure how to set it up so that theres also a connection with my Hp

how do I set up my airport to make a connection with my Hp? I already have it set up for my mac laptop just not sure how to set it up so that theres also a connection with my Hp

I set up my new HP Descjet 3054A . I had a problem becouse Apple give me CD as a driver. The thing was that CD wasn good for this printer becouse it was old software:) I had to go to Apple store so the specialist had to download me he wright driver. Becouse I didnt wannet to screw this up . When he downloaded driver I fired it up at house and thingworks perfect. The thing is when you download all the software from HP side . Then you have to connect your MAC to printer via USB . Fallow the instructions it should works. Worked for me. Good Luck!

Why do I lose network connection with my standalone networked printer and have to reinstall it

Similar Messages

Maybe you are looking for