Why do I need to create a URL in options?

I'm not understanding the set up :( I thought that I had installed Firefox. I then want to add on Greasemonkey.

What URL in options? can you provide a screenshot.
If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you!

Similar Messages

Why do we need to create an emergency file?

Please see the link http://help.sap.com/saphelp_47x200/helpdata/en/9f/db95e635c111d1829f0000e829fbfe/content.htm
Why do we need to create an emergency file?

user10566312 wrote:
Packages I know are used to group procedures together. But why do we create packages when stored proc alone is sufficient.For the same reason there are units in Pascal. Libraries in C. It allows the encapsulation of functionality as a single entity with a public interface and a private implementation.
It is is standard as far as structured programming goes.
And a single stored procedure is far from sufficient. It cannot have private and public static variables for keeping state. It cannot present a comprehensive and flexible call interface to the caller. It does not support polymorphism. It cannot expose constants and user types. Etc.

Order types, why do we need to create our order types and not use the stand

HI
Order types, why do we need to create our order types and not use the standard ones during implementation.

Hi Raj,
Well there is no hard and fast rule that you have to copy nad create a new order type. Its just to meet our own requirements that we copy the standard and make the changes if required to meet our business needs.
And by this way we keep unchanged the standard order type for further use.
If you are sure that the standard order type satisfies your need you can directly use that only.
I hope this clarifies the issue.
Do reward if find useful
Regards,
Abhi

When and Why Do We Need to Create 2 Diff iTunes Libraries?

Hi,
When and Why Do We Need to Create 2 Diff iTunes Libraries?
Thanks.
Ed

There's no fast rule sayng you must, and I suspect most people only use one.
You might want to set up a second library if your first one is so huge that it is slow to operate. Split your media. For example, I don't listen to classical and rock music at the same time and could restart iTunes ffrom a different library when the time came to switch.
I have a few extra libraries. One's for music I organized for a special occasion but don't really listen to myself and don't want it cluttering mine. I also have a special library for my mp3 player (not an Apple model) with its own set of files which match some in my main library but they are tagged differently to be compatible with the player's quirks.
I could also see having a different library for files on an external drive if you have some on your internal drive too. You might, for example, have a bunch of movie files on an external drive that you don't normally need to have plugged in all the time and don't want iTunes giving you a bunch of exclamation marks if are using it to play your music media on your internal drive.

Why do I need to create playlists to sync audiobooks correctly?

When I try to just sync audiobooks to my iPod, I get a jumble of tracks. I have to create each audiobook as a playlist, and then add the playlists. Also, I had to designate each audiobook as such (instead of music) but in the grid view, each one was still categorized as music and it was impossible to change them. Only in list view could I change each track and have it "stick." I have been messing with syncing my iPod for over an hour now, when it should be an easy procedure.

Unfortunately, organazing audiobooks is a bit trickier than it needs to be. See this excellent article from another forum member turingtest2 for more information and tips.
Audiobooks on iPods
B-rock

Why do we need to create DTR client

Can any one give me some info why DTR client are needed when working with JDI. Because, In NWDI we dont need them...But, now I am workign on older version JDI.. So, can anyone let me know.

<a href="http://help.sap.com/saphelp_nw04/helpdata/en/83/74c4ce0ed93b4abc6144aafaa1130f/content.htm">This</a> might give you some help you require.
Regards,
Shubhadip

Why do we need to create Packages?

Packages I know are used to group procedures together. But why do we create packages when stored proc alone is sufficient.

user10566312 wrote:
Packages I know are used to group procedures together. But why do we create packages when stored proc alone is sufficient.For the same reason there are units in Pascal. Libraries in C. It allows the encapsulation of functionality as a single entity with a public interface and a private implementation.
It is is standard as far as structured programming goes.
And a single stored procedure is far from sufficient. It cannot have private and public static variables for keeping state. It cannot present a comprehensive and flexible call interface to the caller. It does not support polymorphism. It cannot expose constants and user types. Etc.

Why does FF need to create 10,000 folders for the cache? How do I make it go back into single folder mode?

Before it was x:\\Cache\"stuff"...Simple easy to find files if you need to.
Now its..
x:\\Cache\X\x1\"a little stuff"
x:\\Cache\X\xA\"a little more stuff"
x:\\Cache\X\x0\"a even more little stuff"
x:\\Cache\X\x9\" crap... I'm lost now""
What is the purpose for the extra folders? I want to be able to revert it back to single folder mode.

You would need to revert to Firefox 3.6.23 to have the old cache setup.
The multiple cache folder setup is to allow for a larger cache which works more efficiently that earlier versions worked.

Why do I need to supply a url when signing up for iConnect?

I am planning on uploading the book to the iBook store.

See here:
https://discussions.apple.com/message/18883215#18883215
Michi.

Why do we need material specification for transfering results to class char.

Hi,
Can you guys tell me why do we need to create material specification if we want to transfer quality inspection results to a batch class?
Basically I have done the following:
-Create Class Characteristic
-Assign the Class Characteristic to a batch class
-Link Class Char. to MIC
-Assign MIC to an Inspection Plan
-Post GR, batch and inspection lot are created automatically
-Record Results for inspection Lot
-Make UD for Inspection Lot
The result is not transferred to batch class, then I create material specification with the MIC assigned, the results can be transferred. But why?
Best regards
Danny

Hello Danny,
This is a standard program, which checks for this indicator at the time of inspection lot completion.
F1- help gives satisfactory explanation
Batch Valuation Possible Without Specification
Use
If you set this indicator, a link between the master inspection
characteristics and the class characteristics for the batch class must exist
when an inspection lot is created, for batch valuation to occur when the usage
decision or inspection point valuation is made. A link within the material
specification is not required.
If you do not set this indicator, batch valuation only occurs when the
usage decision or inspection point valuation is made, if a link using the
material specification exists between the master inspection characteristics and
the class characteristics for the batch class. In this way, you can control on a
material-dependent basis whether the batch characteristics are valuated based on
the inspection results.
Amol.
Message was edited by: Amol Manave : Main purpose is you can control whether Batch characteristics should be valuated based on results or not for particular material. If you set this indicator then batch characteristics will be valuated for all materials and in opposite case Batch characteristics will be valuated for only materials for which Material Specification exists.

Why do I need a CSR if I use -genkey

I must not be understanding something correctly.
What I am doing is:
1. create a key with keytool
2. create a csr
3. sign the csr with my security-manager-tool
But now that I am reading the keytool doc it says the -genkey creates a self-signed certificate, so why do I need to create a csr and sign it with my security-manager?

Well I think I have an answer to my own question which is:
In most cases, you can
1. generate a key
2. self-sign the key/act as your own CA (OR have verisign/thawte sign your key)
After going through the keytool doc it turns out
1. keytool cannot self-sign the key
(However, I can self-sign the key with EA/jaguar security manager).
So basically if people are trying to self-sign the key with keytool, don't even try.

Netbeans - Why do I need to make separate library projects and import?

I'm running through some of the some of the tutorials for netbeans like [acrostic example|http://www.netbeans.org/kb/60/java/javase-intro.html] and I can't seem to grasp the organization.
When and why do I need to create a separate library project and import when the MyApp project I created has a node for libraries?
When and why would I just create another class in MyApp source packages node as opposed to importing the class from a separate library project?
Java's organization seemed simple until I tried the IDE. Help.

Thanks so much for the response, I really have been having problems with this.
georgemc wrote:
Well, for starters, a lib project can be shared amongst many other projects. For another, you won't be deploying your app alongside NetBeans, so you'll need to provide all the libraries as well as your app when you do deploy. Having them all kept in a lib project makes this very simpleAfter pondering it I'm comfortable with the idea that MyApp's Library node shows what classes I have imported and that those classes, being custom classes, should be in a separate project.
>
When and why would I just create another class in MyApp source packages node as opposed to importing the class from a separate library project?I don't know. Not really sure what's prompted you to ask this one, to be honest. What do you mean?Ok, bear with me as I try to explain my confusion... If I right click on the Source Packages node of MyApp it presents me with the option to create a new java class. So why not just put all my custom classes and packages in the Source Package node of MyApp instead of putting them in library projects and importing them?
I tried this, assuming all classes within a package would have knowledge of each other, thus obviating import, but that doesn't seem to be the case. Is that it?
>
Java's organization seemed simple until I tried the IDE. Help.Maybe you started using an IDE to soon? They're there to make your life easier. If that's not happening, you don't need it yetI might seem quite green, but I have to dive in to this because the application I am attempting to make requires the nice GUI editing of netbeans and will grow in complexity with time.

How to create new SVG export option

I need to create a new SVG option to work with exportFile(). The new option will allow me to place a tag on in my exported SVG file. I'm not finding hints in the delivered documentation on how to do this. Could someone with experience in such, please point me to a resource that will help me.
Thanks in advance.
Steve

Hi..
Its continuous to earlier query, creation of new search help in Personnel Administration, we created elementary search help from SE11, now need to integrate this back end customization to front end screen,
How to do this.,
Welcome to all sharing minds.
Regards.
Kanuku.

I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

Hi kamfong,
Went to Settings where?
If you want to use your exisiting Apple ID on your iPad, you need to:
1. Go to Settings>iTunes & App Store and sign out the new ID, and then sign on the old one
2. Go to Settings>iCloud, scroll to the bottom and delete the iCloud account, and the sign back onto iCloud using the old ID
You still have not indindated why you are saying that using your old ID originally "didn't work". What do you mean by that? Did you get some sort of error when you tried to sign on with your exisiting Apple ID?
Cheers,
GB

What is a url and why is it needed to use photoshop

What is a URL and why do I need it to use photoshop on my computer?

what problem are you seeing?

Why do I need to create a URL in options?

Similar Messages

Maybe you are looking for