Why do I receive Error 200378 "Custom scale specified does not exist"?

I am trying to perform offset nulling using an NI-9237. I receive and error in regards to the custom scale even though I programmatically create the scale prior to the task. I am experiencing the erro whne using LV8.2.1 but with LV8.6 the problem disappears (same code, just open in LV8.6 and run)
The error is the following:
Error 200378 "Custom scale specified does not exist"
Possible reason(s):
Measurements: Custom scale specified does not exist. Custom Scale: test
Channel Name: LoadCell_StrainGage_Sim/ai0
Task Name: _unnamedTask<F>
I have attached the code in LV8.2.1
Thanks
Dan
Attachments:
test.vi ‏38 KB

Dan,
I tried your VI and it worked for me after I changed the channel from "LoadCell_StrainGage_Sim/ai0" to something that was on my system. Before that, I got the same error. So...are you sure that there is LoadCell_StrainGage_Sim/ai0 configured in MAX? Stupid question, I know, but it was the only thing I changed.
-Matt
-Matt Bradley
************ kudos always appreciated, but only when deserved **************************

Similar Messages

Help me soon please: error:1065 the database specified does not exist.

hello every one,
when i start the computer the concurrent manager service not started , when i try to start it i have this problem:
"could not start the oracle concmgrvis_orabac service on local computer error:1065 the database specified does not exist."
i restarted computer and tried to stop and start all services more times but no change.
i hope if you can help meplease soon.

check note How to Recreate the Concurrent Manager Service for Oracle Applications 11i on Windows NT
Note:152887.1
maybe recreting the CM will solve your issue
Follow these steps to recreate the concurrent manager service on Windows NT:
1. cd $APPL_TOP
2. dos> envshell.cmd (this opens up a new DOS window. Go to that window and
do the following).
3. cd $COMMON_TOP/admin/install
4. dos> adsvcm.cmd -deinstall (deinstalls the ccm service)
should exit with status '0'
5. dos> adsvcm.cmd
should exit with status '0'
Should see "Successfully installed concurrent manager"
6. Reboot
fadi
.

Error 1065 The database specified does not exist

Hi All,
When I am trying the start the Concurrent Manager [[From Services.msc]] I am getting this error.
Error 1065 The database specified does not exist
I am also not able to connect through SQL* Plus.
Thanks
--Anil

Hi,
Thanks to both of you. I don't have metalink access right now.
Hussein
It's my Desktop. For quite sometime I have not run it and Now when I am opening the Apps I am not able to login.
Also I don't have much idea where to check the CM log file????
Thanks
--Anil

Receiving Error in Shopping Cart : Order Does not exist

Hi
While creating Shopping Cart and click Insert From Clipboard button, I am receiving " Order xxxx does not exist (Item yyy ).
Please tell me why I receive this error and what causes and possible fixes to this?
Details:
The scenario I am doing is I have a webdynpro ABAP application which copies Value, Cost Center, OR Cost objects in to Clipboard.
now when I go to Shopping card - > descrive requirment -> Cost assignment section-click Insert From ClipBoard - throws below error: "Order xxxxxx does not exist (Item yyyy)"
Indeed OR cost objects which are valid in the SRM system and every OR line is seen as invalid by SAP with above error message. Please explain
Thanks
Praveen
Edited by: Praveen kumar Kadi on Jun 21, 2011 9:16 AM

Hi,
Thnaks for your reply.
Actually manual copy To clipboard works fine from Shopping Cart. when we use webdynpro application to copt to Cliboard with same data it doesn't work. So I believe the key to debug SRM Shopping Cart-> CopyToClipBoard functionality like how the values have been copied to from shopping cart. So that we can compare Shopping Cart->CopyToClipboard value with Webdynpro CopyToClipBoard values.
How to find what and which values and in which format copied from shopping Cart-CopyToCliboard.? Anyway to see this in debug.
Please help with some screenshots/debug screens.
thanks
Praveen

Error " M7 185 " consignment stock does not exists with Customer/vendor

Dear SDN Team,
The system is throwing the error "Special stock at customer/vendor 3000000001 does not exist (Notification E M7 185) .
The consignment Process has been sucessfully maintained correctly with the customer/vendor in ECC system ,but the CRM system is but not able to recognize that the stock is available and throwing the error "Special stock at customer/vendor 3000000001 does not exist (Notification E M7 185).
kindly suggest.
Regards
M.R.Reddy

Hi Mirja,
have you gaines any solution for this issue. I am currently facing the same problem and have no idea how to solve it
Thanks
Matthias

Error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project._

Hi to all,
I tried to compile my .sln with VS2010 but I had this error.
error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project.
It occurs only compiling with win32 configuration but not with x64 one.
Ideas?
Thank you in advanced

In which version of Visual Studio did you create this solution? And What type of the project in this solution? And could you please post the proj file here?
If this solution is created in VS2012 or VS2013, please make sure the original solution is not corrupt, it can be opened and built successfully in the corresponding Visual Studio. For probable compatibility issues, you could check the documents here:
Visual Studio 2012 Compatibility
Visual Studio 2013 Compatibility
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Build error :package com.sun.javadoc does not exist

Question from a Turing machine expert who is new to Java.
Trying to run a sample program from Richardson's book "Java JDK 5 Edition" Chapter 1.
In Netbeans 5.5 receive build error :package com.sun.javadoc does not exist
for "import com.sun.javadoc.*;"
Believe missing classes are in tools.jar in C:\Sun\SDKee5SDK\jdk\lib
How do I define this to Netbeans and/or JDK?
Using java_ee_sdk-5_01
and netbeans-5_5-windows downloads.
Platform is XP.
Netbeans has been updated to date.
Appreciate.

sony_tj wrote:
D:\Xyz.java:22: package com.sun.javadoc does not exist
import com.sun.javadoc.*;After getting this error, I have set my classpath to C:\Program Files\Java\jdk1.5.0_03\lib\tools.jar. But still the error persists. Could anyone please tell me how do I solve this problem.You have failed in setting your classpath in that case.

Build Question: error 7 occurred at source does not exist

I have VIs built in LabVIEW 6.1. It works and built well. In LabVIEW
7, It works well. But when I try to build it. I got error.
I first use the mass conpile to compile VIs and then build the exe
with default settings. I got:
Error 7 occurred at source does not exist
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted,
or the file path might be incorrectly formatted for the operating
system. For example, use \ as path separators on Windows, : on Mac OS,
and / on UNIX.
NI-488: Non-existent board.
But It does not point out which file does not exist.
Anyone can help me out?

Hello yqin,
Here are some more KnowledgeBases that may pertain to your issue.
Error 7 When Building Applications and DLLs That Use the LabVIEW Report Generation Toolkit
Why Do I Get Error 7 When Building an Executable from a Build Script?
Error 7 at Invoke Node When Building a LabVIEW Executable
If the above KnowledgeBases do not work, we will want to try the following procedure.
1. Open your Main VI.
2. Hold + a
nd click the run arrow (forces recompile).
3. Close the VI and mass compile it.
4. Keep the VI closed and build the application from scratch (do not use a script).
5. Ensure that all VIs called dynamically are included as support files before building.
Please let me know if you have any questions,
Matt
Keep up to date on the latest PXI news at twitter.com/pxi

Error 7 occurred at source does not exist

I have VIs written in LabVIEW 6.1 and works fine. I try to use LabVIEW 7 to build it. But I got error:
Error 7 occurred at source does not exist
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on UNIX.
NI-488: Non-existent board.
Application Builder: Error copying files.
It does not point out which file is not exsisted? Why?

Hello �
From your question, I understand that you are trying to build an executable for LabVIEW 7.0 of some VIs that were built in LabVIEW 6.1.
You need to save all the VIs and subVIs that will be contained in the executable (or DLL) in LabVIEW 7.0 first. For this, the only thing you need to do is to open them in LabVIEW 7.0 and re-save them. If you want to keep copies for both versions of LabVIEW, you could even create a different folder for the version 7.0 ones. When re-saving your VIs just go to File >> Save As and browse to the directory you just created.
Then, you will be able to build the executable for LabVIEW 7.0.
Another possible solution to the problem is what is mentioned in this 5F09C86256745006E4494?OpenDocument>Knowledgebase.
Hope this helps!
S Vences
Applications Engineer
National Instruments

FTXP-error-Domain MWART fixed value does not exist- Message no. F4341

Hi,
I am trying to created a new record for a tax code, and i get this error
Domain MWART fixed value does not exist
Message no. F4341
I looked up OB40, and not sure how to fix this. Do you know how to check the tax codes? How to validate OB40?
Thanks.

Hello,
Please follow this procedure for the input tax codes which experience
the error F4341:
1) Go to SE16 and enter table T007A
2) Hit enter and in the next screen choose the following parameters
   and enter values that represent the tax code for input tax which are
   encountering the problem.
   KALSM (tax procedure)
   MWSKZ (tax code)
3) Click on the "execute" button.
4) Take special attention to column MWART which represents tax type.
   This should only have a value "V" to represent input tax (or "A" if
   output tax).
5) The cause of the error F4 341 is when this column does not contain
   any value or is blank. Which means that there is no defined tax type
   "A" or "V" maintained in customizing.
6) To correct this you should maintain the value again via FTXP for the
   corresponding tax codes and complete all the customizing settings
   relating to tax on sales and purchases thereunder. Afterwhich you
   should no longer experience the error message.
Regards,
REnan

MBAM - SCCM 2012 Reports - Error: the 'MBAM Policy' view does not exist

Hi
I have installed MBAM with SCCM 2012 integration. A single server install with SQL server 2012. Mostly it has gone smoothly and laptops are being encrypted and pins stored and recoverable. The problem I have is reports are not showing. I get the following
error message.
"Error: the 'MBAM Policy' view does not exist"
Any ideas why this is? I get the same error message with all 4 reports.

Hi Slycy,
There is another thread that seems to be a similar issue
here that may help you. The last post in particular has a number of steps that you can use to speed up creation of the views:
Just for future reference, there are quite a few things that have to happen before the view is created. This is merely how CM works.
Make MBAM MOF changes
Select TPM spec version in hardware inventory
Install MBAM CM Integration feature
Perform a machine policy refresh cycle on a client to get the MOF changes that need to be inventoried
Perform hardware inventory
Update MBAM Supported Computers collection membership. The machine should appear if it meets the criteria
Run another machine policy refresh on the client so that the Configuration Baseline will come down
Make sure that the MBAM agent has woken up once
Evaluate the Configuration Baseline
The MBAM views should be created now.
You don't have to do this for every machine, but this is the process to speed it up. If you let CM do it, it could take over a week before the view is created the first time, depending on when Hardware inventory runs, etc.
Hope this helps,
David

Error 30502: The folder ID does not exist

When I use the Category and Perspective drop down select boxes on
the navigation bar, I receive an error message: "Error 30502: The
folder ID does not exist.
I have checked. I do not have any invalid packages.
Any ideas?

Pls try posting in Portal > Content Area forum.

Invoice created via SUS having error -The template item 1 does not exists

Hi All,
We are in SRM6.0 and in our PRD system, we have few invoices created through SUS showing error "The template item 1 does not exist.
These invoices went into "To be corrected" status and when I hit check it gives me above error message. The message itself don't make much sense to me. Please note we can create new invoice in SRM manually and everything works fine.
Appreciate any pointers.
Thanks, Sachin

We have analysed the issue and found we are getting this error because these invoices are missing with "BE_LOG_SYSTEM" field in table BBP_PDBEI and "BE_REFOBJ_TYPE" field is showing "BUS2201 instead of "BUS2012".
Any feedback why we have these difference as compare to good invoices (created directly in SRM).
Thanks, Sachin

Error 1070023 Configured Disk volume does not exist.

Hi
I installed Essbase 11.1.1.2 in stand alone mode. When I am trying to start Sample.Basic, I am getting the below error
Error 1002097 Unable to load database Basic.
The App log showed the following error
Error 1070023 Configured Disk volume does not exist.
Please help..

So everything works when the volume is set to E?
If so, you might be able to use DISKVOLUMES E in the essbase.cfg file which sets a default (for BSO cubes, at least), but you shouldn't have to do that.
The DISKVOLUMES documentation says that the volume that contains your ARBORPATH is the one used by default. Not completely sure I trust that it's up to date, and isn't now ESSBASEPATH or something else, but regardless, do those variable all look to be set correctly? To be honest, that's a longshot, as I'd be surprised if a missing / incorrect value there wouldn't cause bigger problems...

Error 1075: The dependency service does not exist or has been marked for deletion

Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
not exist or has been marked for deletion."
Rebooting gets me nowhere.
In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
Any ideas, please?

Hi,
Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
Kim Zhou
TechNet Community Support

Why do I receive Error 200378 "Custom scale specified does not exist"?

Similar Messages

Maybe you are looking for