Why Do I Receive Internal Software Error(s): Terminal Index Out of Bounds. Error code -61350,When Compiling my FPGA VI for an cRIO-9118 using NI 9223 ?

I am receiving the following error (in a pop-up window) when compiling my VI FPGA code in chassis NI 9118 using NI 9223 module. This error occur while compiling process (generating intermediate files , stage 7 of 7). how do I resolve this error ?
thank you
additional information :
Original error message:
Errors :
Internal Software Error(s): Terminal Index Out of Bounds.
Error code: -61350
Details :
A terminal with this index does not exist on this block diagram node.
NiFpgaHandleCallbackError.vi<APPEND>
<b>Complete call chain:</b>
NiFpgaHandleCallbackError.vi
niFpgaNodeInformation.lvclass:Get Const Variant.vi
DfirModGen.lvclass:GetConstant.vi
niLvFpgaMungerBrainwashIONodeCommon_Dfir.vi
niLvFpgaMungerBrainwashSingleIOGrowableMethod_DFIR.vi
nirviEIOMethodImplementation_SpecifyDFIR.vi
nirviEIOMethodImplementation_SpecifyDFIR.vi.ProxyCaller
Solved!
Go to Solution.

Hi tesa,
This is a bug which was fixed in LabVIEW 2012 SP1. The CAR number created for this bug is 332811 and as you can see in this link, it is already in the bug fixes list.
Carmen C.

Similar Messages

On Adobe Acrobat Pro X "I received error code 2148073483 when trying to sign my documents. I am using Windows 8.2"

Using Adobe Acrobat Pro X I received error code 2148073483 when trying to sign my documents. I am using Windows 8.2.

Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Error Code -61499 when Running an FPGA VI on Develpement Computer with Siulated I/O

Dear Forum
I have a problem with running my FPGA VI on the development Comupter with simulated I/O
I Created a testbench as described in
http://zone.ni.com/reference/en-XX/help/371599D-01/lvfpgaconcepts/test_bench_tutorial/
This works fine. I can read an write the I/O Nodes
But when I insert a read/write control node (from the FPGA interface palette) into my Host-VI to directly write a value to a Control on my FPGA VI, i get the error -61499
The error happens in the VI on my Hostcomputer ad the message is:
An internal software error on LabView FPGA Module has occurred. Please contact NI technical support.
The error does not happen, if I remove the read/write control, or if I dont call it.
The error does not happen, if I compile the fpga-vi and let it run on my fpga hardware. It happens only in the simulated mode.
The error happens in the simulated mode when i use the testbench for simulating input Signals, it also happnes, when I use random Input Signals.
It seems that the error does not happen during compilation. The simulated VI runs and the error happens, only when I call the read/write control.
Can anybody help me?
I appreciate every suggestion
Thanks
David
Solved!
Go to Solution.

Ok, the problem is solved, thanks to ni support who helped me:
The solution is, not to have spaces and end of lines in the names of frontpannel elements.
In simulated mode, a host-vi has problems to access frontpannel elements of the fpga-vi with the read/write node if the frontpanel elements have special characters.

Patch for error code 2131 when burning CDs in itunes for Toshiba computers:

Just today, Toshiba posted patch for the infamous "error code 2131" when trying to burn CDs in itunes on many Toshiba laptops. Lucky for me, today was the first time I tried to do so, but I feel for all you other folks who have been very frustrated about this issue. Here is the link to it on the Toshiba support page:
http://www.csd.toshiba.com/cgi-bin/tais/su/susc_dtlViewDL.jsp?soid=2024958&moid=1909174&rpn=PSAF3U&BV_SessionID=@@@@043462335 6.1208403240@@@@&BV_EngineID=cccgadedlgfhkdecgfkceghdgngdgnn.0&ct=DL&alldocs=false
I'm going to install it now and report back if there is anything tricky about it (I read in another forum that someone had already gotten the patch and had posted a link to it at a private website where there were a few different options and you had to figure out which was the right one, but this should be easier and "official")
Hope this helps!

Dell Inc. Dell DM051
hmmmmm. i'm proceeding under the assumption that you've got a Dell 5150/E510. if i'm wrong about that, please check in with Dell to confirm your model prior to applying any updates.
i had a look at the support site for your model (or at least, what i'm assuming your model is). your firmware appears to be up to date for the HL-DT-ST DVD+-RW GWA4164B that you're getting the error on, but there does seem to be newer firmware available for the SONY DVD-ROM DDU1615. so it might be worth getting that, just in case there some kind of odd interaction happening between the drives.
Dimension 5150/E510
otherwise, we'd better check on some of the other usual suspects with this sort of thing:
iTunes for Windows doesn't recognize my audio CDs
... and these resources might be helpful with that:
Using CD Diagnostics in iTunes for Windows to troubleshoot CD/DVD drive issues
Updating the drivers on your Windows PC

Why do I receive internal server error (#IS6532) when I Get Messages?

When I "Get Messages" in TB, I receive one of three messages:
● Sending of password for user [email protected] did not succeed. Mail server pop.mail.yahoo.com responded: internal server error (#IS6532)
● The mail server responded: From address not verified - see http://help.yahoo.com/l/us/yahoo/mail/original/manage/sendfrom-07.html. Please verify that your email address is correct in your Mail preferences and try again.
● From address not verified - see http://help.yahoo.com/l/us/yahoo/mail/original/manage/sendfrom-07.html. Please verify that your email address is correct in your Mail preferences and try again.
This has started recently with no changes on my part. I have Yahoo set up to forward a copy to an alternate email address.
Thank you for your help,
Major Howland

The error code seems to be a recurrent Yahoo! issue, viz:
http://codeverge.com/mozilla.support.thunderbird/internal-server-error-is6532/1531508
http://www.dslreports.com/forum/r28485957-Intermittent-snd-rcv-error-when-with-Yahoo-Mail-and-POP3
This guy proposes a solution, but since this was some time ago, it's hard to see that it is relevant today. However, it would be good to check you're using the recommended settings.
http://www.emailquestions.com/isp-free-email-support-forums/9255-fix-err-sys-temp-internal-server-error-is6532.html
Given Yahoo's somewhat spotty record, it seems likely that your two other errors are also part of the general unreliability of Yahoo's service. :-(

TS3694 why do I keep getting an error code 3194 when I try to restore my disabled ipod touch?

I don't know what to do to stop getting error code 3194. I have tried almost all basic suggestions, Is there anyone that can help me retstore my ipod touch?

See:
iPhone Error 3194 - How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore
iTunes: Specific update-and-restore error messages and advanced troubleshooting

Error code 2324 when trying to download iTunes for windows 8.

I started by trying to update my iTunes, and was given an error message and was unable to open it. I've deleted/uninstalled it, each time I try to reinstall it or download it again, I get the error code 2324. I have no idea how to proceed or what I am doing wrong, please help!

Let's try the fixit from the following Microsoft document with that one:
Fix problems with programs that can't be installed or uninstalled

I keep getting an error code 306 when trying to a reset for my iphone 4

Every time I try to complete a backup and reset for my iPhone 4, I keep getting an error code 306. I have followed all of the suggestions given through the apple support websites, but nothing works. I am also having trouble downloading a recent purchase from the iTunes store to my computer. Again, I followed all of the suggestions listed on the website.

IMO Adobe left a Program out of the typically list namely Photoshop
Troubleshoot Update Errors
Many update errors are caused by missing or modified files required by Photoshop, typically by a disk cleanup utility (Ex: CleanMyMac, MacKeeper, etc). Make sure you have the latest updates for your clean-up utilities or discontinue use.
Explanations of error codes:
U = Updater.
44 = Install Update Error
M1 = Automatic
M2 = Standalone mode
P = Patcher
6 = Done With Errors
7 = Installation Failed
ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
ISSUE: The adobe update 13.0.1.2 errors with code U44M1I210.
SOLUTION: Restart your system, download and install the updates manually. See “Solution 3″ here. http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
========================================================================================== ======================================================
To fix the update install problems I've had with CC I use the direct installer I downloaded from Download New Adobe CC Trials: Direct Links (no Assistant/Manager) | ProDesignTools Follow the download instruction to the letter otherwise you will be denied access. Once to have it. Install CC on top of itself. That will back level CC to CC version 14.0. Then use Photoshop menu Help>Updates. All updates should install and all the extensions and addition you made to cc will still be there.

Firefox will no longer load I have windows 7 start pack 2 I receive this message: Error code: ssl_error_protocol_version_alert

I receive this message: Error code: ssl_error_protocol_version_alert
firfox will not load

My apologies for not supplying the rest of the information required. I will go through the information provided in the link. Thank you.
I am using Windows 7 Home Premium.
The previous version of Acrobat is showing 8 from CS3 Design Premium.
I did not get a chance to try another DVD drive or load onto another machine to test the disk. I will also have to note all of the errors from the reinstall failure.
I do see the original install folder created - C:\Program Files (x86)\Adobe\Acrobat 8.0
Jeff

Internal Software error PGC for encore CS3 !!! solved !!!

Almost everybody here knows the next error:
PGC "timeline name" has an error at xx:xx:xx:xy internal software error : %0, line timeline name - PGCINFO: name= timeline name, ref=BPGC, time=xx:xx:xx:xy
Where the y in time stands for the length of the timeline minus 2 frames. The BPGC error can also be FPGC or DPGC dependant on how many menu's there are in the project.
It kept me awake for weeks and after reading this forum several times and comparing encore CS3 with encore 2.0 filenames I found the solution.
This Error is a bug in encore witch has nothing to do with blank filename spots and sonic coding or codecs or planning your workflow with a pencil but pure with the combination Adobe Premiere Pro CS3 and Encore CS3.
This is what generates the problem:
In Adobe Premiere Pro CS3 you build project with video, sound and chapters. Then you export the project via the Media Encoder not Multplexed.
Premiere CS3 then creates the following files:
filename.M2V (video file mpg)
filename.AC3 (audio file ac3)
filename.M2V.XMPSES (an adobe file with preview info and chapter pointers)
filname.XMP (??)
It is the .M2V.XMPSES file witch creates the PGC error. If you use the MULTIPLEX DVD option then ADOBE will not create the .M2V.XMPSES file so there will not be an error. This trick mentioned by ADOBE and many others is just to go around the bug instead of solving it. Also with multiplex you have just one sound track. I use two sound tracks like 5.1 and a 2.0 track witch you can choose in a menu.
Some people say it is the blank spots. Also not true. They have probably just erased the blank spots of the M2V file and forgot the .M2V.XMPSES file.
When you just delete the .M2V.XMPSES file and then open the M2V and AC3 file in Encore as a new asset, make a timeline and menu's and the project will built and burn. Only if you delete this .M2V.XMPSES file Encore takes a longer time to import the M2V file and will be without the chapter points.
Almost everything else will work like menu with sound and even a movie background (use M2V files). Only the motion buttons in a menu still wont work unless you use a black background !?!. Haven't figured this out yet. Only solution for this is use Encore 2.0. In this older version also the motion buttons will work without error's (everything else also so why buy CS3??)
Here is what you must do create a DVD without errors:
-Create a project in Premiere Pro, even with chapters.
-Write down all chapter points (minutes:seconds:frames)
-Create two new unique maps in explorer for example D:DVD1 and D:DVD2
-Export in Premiere with Media Encoder without the Multiplex:DVD but with NON to the D:DVD1 map
-Copy from D:DVD1 only the M2V and AC3 files to D:DVD2
-Start up Encore DVD CS3 or 2.0
-Create a new unique project in Encore for example "DVD" and save this in the map D:DVD2\
-Then use Save-as (under file) and pinpoint to D:DVD2\dvd to be sure that all Encore's files are placed in this folder.
-Select M2V file and make new timeline.
-Make chapter points (you wrote down the points, did you?)
-Create menu's, even with sound (AC3) and movie background (M2V)
-Then render project if you have used a video for menu background
-Finally Built and burnnnnnn!!
-If you like to use motion buttons in a menu then use Encore 2.0
I have double checked my work flow and it really works. I have built a project and burned with success Then I deleted the timeline and the M2V file. Copied the .M2V.XMPSES file in the used folder. Re loaded the M2V file in encore (this time much faster! and with chapter points). Tried to built and burn and back was the error. Also this happened in in Encore 2.0!!
Hope that this will solve the PGC error once and for all !!!
Marcel W
system:
acer aspire AMD 64 3800+
2 GB
250 GB hard drive for system
750 GB hard drive for movie
software Adobe Encore 3.0.1.008, Premiere PRO 3.2.0, Photoshop CS3 10.0, All upgraded
NERO 7
No Internet

> Where the y in time stands for the length of the timeline minus 2 frames.
This can actually vary, and so far at least, I don't think we've seen a pattern as to type of pgc error based on how many frames from the end it reports.
> The BPGC error can also be FPGC or DPGC dependant on how many menu's there are in the project.
Number of menus is not relevant; the iteration of the first letter is more related to subsequent occurrences of the error. In my current tests it did not always update; they may have been too similar.
> This is what generates the problem...
Well, the problem does not occur every time you do what you describe, any more than it occurs every time spaces are left in the file names. What you have is, as some other suggestions, a workaround. Thats not bad, and I wonder if you are onto something as to what is contributing to the problem.
So, on to the interesting part whether the xmpses file, or at least what Encore is doing with it, is contributing something. I took an old test project that throws the PGC error and did some experiments.
Background. I am a user who does get the pgc errors regularly, but not always. Creative Suite Production Premium, with PPro CS3 3.2.0 (374) and Encore 3.0.1.008. Pentium 4 2.8GHz 2G RAM, XP SP3, Multiple drives, Nvidia GEforce4 MX440 i.e. an older system. I have lots of stuff loaded and running, including virus protection and firewall, so there are any number of potential conflicts. But I get no crashes, and only one problem other than the pgc. (PPro and Encore monitor windows do this diagonal thing I suspect the display card, but the drivers are up to date. Maxing and then back to fit fixes it.)
If you want to attempt to replicate my studies, here is a link to my problem clip and the first Encore project I describe.
http://www.videoandcomputer.com/test/pgc_test.htm
This project involves a very short AVI export from PPro CS3 - just over 8 seconds - called pgcbad_clip1.avi. Just to answer any question, the source is dv camera capture, and the source and avi export I use are dv avi type 2. There were no effects added on the timeline.
Test 1: Create a project in Encore CS3. Use the sunset menu and delete all the buttons except "play all." Import the avi as a timeline. Set the timeline end action as "return to last menu" and set the button link to the timeline. Auto transcode. (Project settings are 8mbps max and a3c.) Check project shows okay; there is never a problem with that. Build to a DVD folder in a new folder. This project throws the pgc error.
Test 2: Now create a new Encore project in a new folder. Use the same process, except import as timeline the m2v and a3c files from the first run. (I.e. if the clip is pgcbad_clip1.avi, in the test1 project folders, there is a folder called pgcbad_clip1.avi that has 6 files.) Note that in the folder they are imported from is an xmpses file from the first project's encore transcode. The build again fails with the pgc error - same frame, etc, but I really think the frame number doesn't matter.
Test 3: Now create another new Encore project in a new folder. Use same process, but before importing the m2v and a3c as timeline, delete the xmpses file. Drumroll...... Build succeeds!
Go figure.
This is not the repeatable bug option weve been looking for, but based on a clip that always fails, it does demonstrate the odd event of deleting the xmpses file as a workaround. I wonder if that will give adobe something to work with.
Can anyone else get my clip to work/not work in a straight project?
Test 4: Just to answer the question since the avi file fails here, will the elemental option succeed? I exported elemental m2v and wav from PPro, used the same project process, and transcoded the wav. That build also works! I have seen this work both ways. I have had projects where the elemental failed, and an avi export worked. I do believe the elemental options work more consistently. But my project that I completed yesterday used all avi exports, animated buttons in the submenu, - no pgc error.

Why am I receiving an unknown error message when try to upgrade OS 10.8 to Yosemite? It also says "There was an error in the App Store. Please try again later (4)."

Why am I receiving an "unknown error message" when I attempt to upgrade my X OS from 10.8 to Yosemite? It says "There was an error in the App Store. Please try again later (4)." This happens only when I check for updates/upgrades for my software and then try to upgrade Yosemite in the App Store. Thanks for any help!

Hi.
I'm having the same problem. Could you tell me how you resolved it.
Thanks
Aliquatpat.

Internal Software Error occurred in MIG software DAQmx

Hi All, I have a very disturbing problem. Ever since upgrading to Labview 2011 and NIDAQ951f1 I get errors like the following in code that uses DAQmx:
Error -229771 occurred at DAQmx Create Channel (AO-Voltage-Basic).vi:1
Possible reason(s):
Internal Software Error occurred in MIG software. Please contact National Instruments Support.
The strangest thing is that this happen only when I run the VI while a LV project is open! It does not matter wether the VI is part of the project or not. As soon as I open any project (or create a new empty project) the error occurs when I run any DAQmx code. To test I am using one of the DAQmx example files: Cont Gen Voltage Wfm-Int Clk-On-Board Regeneration.vi for now, but the problem occurs with the other examples as well.
I tried to resolve the issue by removing all NI software and doing a clean install, but the problem persists. Needless to say I cannot do any development this way.
Any idea what's going on? Please advice.
Best regards,
Dixie

Hello Dixie,
There is a knowledge base topic treating this issue --> http://digital.ni.com/public.nsf/allkb/03123D0E8A36C48E862577A4005B6BAA?OpenDocument
Have you already had a look at it?
The problem you have can also be somewhere network-related. As some networking feature are handled by the Project Explorer, this can explain why you encounter the issue only when it is open. I propose that you first check the knowledge base and then keep me updated. I will give you further info if that does not solve the issue.
Cédric | NI Belgium

Internal software error: .\PGCStreamInfo.cpp, line 1413

Im designing a DVD teaching project within Encore DVD 2.0.0.48678 from the Creative Suite 2 Production Premium software system. The project is very large and complex. As of now there are only 2 separate timelines. 1st time line has 50 chapters. 2nd time line is not finished but currently has 15 chapters. Because its a teaching DVD, there are also chapter play list created for each individual chapter. I also have a countless number of menus and links to sub menus and additional video links from the chapter play list. All of my links are set and operational with all functions in the individual menus working properly. This is an ongoing project for 3 months now, with perfect results prior to today. I have used the "preview from here" function with no problems to test the links and verify the menu structures with flawless results for the past 3 months. Today I was giving a demo of my progress, when I selected the "preview from here" I received this new error message, "internal software error: .\PGCStreamInfo.cpp. line 1413". I have checked and rechecked links, buttons, playlists, chapters, end actions, timelines, basically everything I could imagine and have even tried a computer restore point from 5 days back, at this time still have not resolved this issue.
AMD Athlon 64 3000+
2.01 GHz 1.00 GB of RAM
Microsoft Windows XP Home Edition Version 2002 SP2
Gigabyte GeForce 7300 GT videocard
Thanks for any suggestion, if more info is needed to solve this, i can provide it.

There are a couple of other threads about a similar error which seem to point to a possible chapter playlist problem:
Internal Software error ..... When 'preview from here' or Build
Chapter Playlist play order bug?

Internal software error: .\Vobulator\BlockPlanner\BlockPlanner.cpp, line 217

What is this about?

I also got the "Internal Software Error...Vobulator...Line 17" error in Encore CS6. One of my timelines had diagonal gray bars for the last 50 or so seconds and the culprit was the chapter marker I had placed within that (apparently) forbidden zone. Once I removed the errant marker (who needed that one anyway?) the error messgage disappeared.
For the record, I had eliminated everything in the but the First Play video (in other words the Main Menu, two timelines and a playlist did not appear in the Flow Chart) and I still got the error message. I tried renaming the timelines, using underscores instead of spaces, etc.
I also tried running Encore as an Administrator - didn't work.
Removing the chapter marker in the greyed out area at the end of a video clip was the only solution that worked.
Now if I could only figure out why the end of that clip - and only that one clip - was grayed out...

Internal Software Error: .\AVTreeNode.cpp, line 25 when saving a project

Hello,
I am trying to work with Encore DVD 2.0 on Windows XP professional (SP 2). Until now with every project I try to make I see new error messages, and my whole work consists of trying to find work arounds.
My actual project consists of five slide shows. They are all between 1 and 2,5 minutes. Except for one, that only consists of a black screen shown for 5 seconds.
I have a playlist that contains all slide shows. Between two of the longer slide shows I inserted the 5 second black screen. What I wanted to achieve with this technique is that I can easily change the "gap" between two slide shows by changing the duration of the black screen slide show once. Alternatively I could have added a black image as the last slide two each of the four slide shows, but then I would have to change the duration of that slide four times when I want to change the gap between the slide shows.
Anyway, I finally tried to create the project which resulted in the CVOBUPlanner.cpp error in line 331.
So I wanted to track down the problem by
- deleting some of the slide shows
- saving the project under another name
- trying to create that project
So first I deleted everything but the first slide show from the playlist. then I deleted all the slide shows but not the first one (and the 5 second black screen though I didn't use it here), from the project. Saved the project under another name and created it without an error.
Then I opened the original project again. Now I deleted everything but the first slide show and the 5 second black screen slide show. Again I deleted the slide shows, but not he first and the 5 second black screen.
I tried to save the project under another name, but now I received an internal software error: .\AVTreeNode.cpp, line 25.
After I restarted the application I was able to open the original movie, delete the slide shows and save the project under another name.
I still wanted to let you now because this is an error message that I have not seen before and didn't find here in this forum.
Regards,
Christian Kirchhoff

There are a couple of other threads about a similar error which seem to point to a possible chapter playlist problem:
Internal Software error ..... When 'preview from here' or Build
Chapter Playlist play order bug?

Why Do I Receive Internal Software Error(s): Terminal Index Out of Bounds. Error code -61350,When Compiling my FPGA VI for an cRIO-9118 using NI 9223 ?

Similar Messages

Maybe you are looking for