Why do I receive message "unable to read some or all of these files" in Lightroom 4

I am getting this error message with my memory card. Does anyone know what I might do? Thanks Larry

Hi
I am having the same problem. I have checked my card reader, disk space, external drive space etc etc and have had no success. I have attempted to use my camera connection instead of card reader and still the same error comes up. I am able to physically copy the files to the hard drive by copy and paste in OS and the files are on my drive. Still lightroom wont read them on import. I had no trouble firing up the old laptop (windows based) and using windows to backup these files from card reader to external hard drive and then opening them in photoshop elements and ACR. I shoot both RAW and JPEG and it seems that it is only the CR2 files that it cannot read however I have lightroom set that it recognises the RAW and JPEG as one file. I found (possibly on this forum somewhere) that it may be a permissions error. Even though I have had no recent updates from apple that I know of I have run "repair permissions". This too has not helped. I am still on the trial period of lightroom as my computer is new in the last month and able to run lightroom now.
I am out of ideas.... Any suggestions would be greatly appreciated!!
Cheers
Emily

Similar Messages

Why am I receiving message to play a movie from iTunes account "cannot play movie". It say not authorized to play protected movie.

Why am I receiving message to play a movie from iTunes account "cannot play movie". It say not authorized to play protected movie.

In a different post, you asked:
Phase10117 wrote:
So r u telling me that I can only look at a movie from my iTunes account on the device that it was download from. This doesn't set very well me. U should b able to your purchase movies from your cloud. Is apple working on this resolution?
There is no resolution needed, as this is not a problem.
I am saying not the device, but the Apple ID is what needs to be the same, unless the movie is rented.
If the movie is rented, it can only reside on one device at a time. But from your error message above, I don't think that is your situation.
Your error message suggests a different Apple ID purchased the movie. If you want to see it, you must use your computer's iTunes, go to Store > Authorize This Account in the iTunes menu on your computer, and have that purchaser sign in with their Apple ID and password, then sync your iPad to that computer.

I can send messages however i can't receive messages from everyone. only some contacts

i can send messages however i can't receive messages from everyone. only some contacts

Yes, I already talked about this to my carrier. Do you think it doesn't have any problem with the phone?

I have set up my Yahoo! account to be used as default mail account on iMac. I am receiving messages, but cannot send them. All settings appear to be right. What can I do?

I have set up my Yahoo! account to be used as default mail account on iMac. I am receiving messages, but cannot send them. All settings appear to be right. What can I do?

The problems I am having are when I use Yahoo! with the iMac mail application. Yahoo works fine on the browser.
The outgoing settings I am using are:
Outgoing Mail Server (SMTP): yahoo.co.uk (Offline)
Description: yahoo.co.uk
Server name: smtp.mail.yahoo.com
Use default ports (25, 465, 587)
Use SSL
Authentication: Password
User Name: ********@yahoo.co.uk
Password: *************
Of note:
I cannot stop it from saying Offline after the outgoing mail server.
I have used the same settings on my ipad and iphone and that works fine.
Really grateful if you can help.
Thanks

Adobe Reader is needed to view these files

Hi,
I have a website that I enter pdf files too to show results. However, when someone goes to view the results page it asked "Adobe Reader is needed to view these files. Click here to download it." After it has downloaded and installed and I go back to the results page, the same message appears.
The webpage is: http://clayshooting2000.co.uk/results.php
Has anyone got any advice?
Thanks,
James

I believe nothing is wrong but the site is very confusing. Whoever wrote the page expected a collection of results to be on the page as well, so the message would make sense: here are some results, to view them you will need Reader (if you don't have it). But in fact there aren't any results at the moment (perhaps clearing the decks for the new season).

How to read some lines from a text file using java.

hi,
i m new to java and i want to read some lines from a text file based on some string occurrence in the file. This file to be read in steps.
we only want to read the file upto the first Occurrence of "TEXT" string.
How to do it ,,,
Kinldy give the code
Regards,
Sagar
this is the text file
dfgjdjj
sfjhjkd
ghjkdg
hjkdgh TEXT
ikeyt
ujt
jk
tyk TEXT
rukl
r

Hendawy wrote:
Since the word "TEXT" is formed of 4 letters, you would read the text file 4 bytes by four bytes. Wrong on two counts. First, the file may not be encoded 1 byte per character. It could be utf-16 in which case it would be two byte per character. Second, even if it were 1 byte per character, the string "Text" may not start on a 4 byte boundary.
Consider a FileInputStream object "fis" that points to your text file. use fis.read(byte[] array, int offset, int len) to read every four bytes. Convert the "TEXT" String into a byte array "TEXT".getBytes(), and yous the Arrays class to compare the equality of the read bytes with your "TEXT".getBytes()Wrong since it relies on my second point and will fail when fis.read(byte[] array, int offset, int len) does not read 4 bytes (as is no guaranteed to). Check the Javadoc. Also, the file may not be encoded with the default character encoding.
The problem is easily solved by reading a line at a time using a BufferedReader wrapping an InputStreamReader wrapping a FileInputStream and specifying the correct character encoding.
Edited by: sabre150 on Apr 29, 2009 2:13 PM

Why do I receive messages with only a date, no subject, no from, no body, etc.?

at varying times I receive messages with a blank subject, no entry in [from, to] no body, but a date in 1969.
Any ideas why I receive these?

Thank you for your help.
I tried emptying the inbox, deleting the 2 files, and restarting TB.
I did the same for Sent and Trash.
I also deleted all .msf files for all inbox sub-folders and for all folders and sub-folders under "My Mail".
the problem persists.
My inbox has many sub-folders and sub-sub-folders should those be moved to My Mail?
Another problem I am having. I do not know if it is related.
I have a stack of filters that move incoming mail into folders. The stack ends with 2 filters.
(1) a filter that checks whether FROM is from someone in my mail lists. It then moves the message into a folder called "Known Sender".
(2) a psuedo-ELSE filter that check whether the subject contains a very improbable string. It put the message in a folder called ") Suspicious".
Sometimes I still end up with folders in Inbox that clearly should be in the two folders, "Known Sender" or ") Suspicious".

Why i cant receive messages

i cant receive messages but i can able to sent, and it keeps on asking me a password
and i don't know which password must i put. and if i put any password it says password
Login to server mail.tshelete.co.za failed.

It would be your email providers server asking for your email password. Work with your provider if you do not know your password.

HT4623 Since my update on my 5s I cannot receive messages from other iPhones. They all have to be sent by text. Why?

Since my 7.1 update I do not receive messages unless they are sent as text.

iOS: Troubleshooting Messages
Symptoms
Learn how to resolve issues with the Messages app on your iPhone, iPad, or iPod touch. You'll learn what you need to send messages using SMS, MMS, and iMessage as well as how to resolve issues with each method.
Resolution
Before you start troubleshooting, learn the difference between SMS, MMS, and iMessage. The first step to resolving an issue with iMessage is to update your iOS software and your carrier settings to the latest versions. If iMessage still has an issue, follow the steps below for your issue.
If you can't activate iMessage with your phone number or Apple ID
See how to troubleshoot iMessage activation. If you're using a China Telecom or au (KDDI) iPhone, you can activate iMessage only on your home network. While traveling internationally, you can't activate iMessage.
If you can't send and receive iMessages
You will need these to send and receive iMessages:
An iPhone, iPad, or iPod touch
iOS 5.0 or later
A cellular data connection or a Wi-Fi connection
A phone number or Apple ID registered with iMessage in Settings > Messages
To resolve issues with sending and receiving iMessages, follow these steps
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
If you aren't receiving iMessages across all iOS devices
Go to Settings > Messages > Send & Receive on each iOS device and make sure that you signed in with your Apple ID. You must use the same Apple ID on each device.
Go to Settings > Messages > Send & Receive > You Can Be Reached By iMessage At and make sure that you selected each phone number and email address you want to use with iMessage.
If you linked a phone number to your Apple ID with iMessage and the phone number hasn't appeared, followthese steps.
Sign out of your Apple ID in Settings > Messages > Send & Receive and Settings > FaceTime on all devices.
If you're linking a phone number to an Apple ID, sign in to iMessage on your iPhone first. Then sign in to the rest of your device one by one with iMessage and FaceTime.
If your iMessages didn't transmit as SMS when iMessage was unavailable for use
Go to Settings > Messages > Send as SMS and turn on Send as SMS.
Select your phone number when Sending iMessages in Settings > Messages > Send & Receive > Start New Conversations From.
Make sure that you can send SMS with Settings > iMessage turned off.
Source: http://support.apple.com/kb/ts2755

Why is AI/ID CS5 unable to read same fonts as CS2?

I have upgraded to CS5 from CS2 and find Frutiger type created in CS2 files cannot be read by CS5. I open an existing file, click update and a dialogue box tells me Frutiger cannot be found on my system. The Frutiger is in Font Agent Pro library as both Postscript type 1 and as Open type.
FAP has verified the Frutiger, FAP displays the fonts, they are definitely switched on. Font Doctor has passed them as OK and I have smashed the font cashes. Both AI and InD CS5 fail to read the fonts. Thinking that it may be the updating process of legacy docs which was at fault, I opened new documents. In the AI Font menu, Frutiger has the black diamond next to it. With InDesign, the Frutiger is simply not listed in the font menu. I am running CS5 on Leopard 10.5.8 on a 2.8GHz intel core duo iMac.
If I go to my other volume with Tiger 10.4.11 that has CS2 which created the files, I am able to open Adobe applications and files with Frutiger displayed perfectly. So what has Adobe done!
Can anyone tell me what is going on and how this problem can be fixed?

Tried that Bob and it made no difference. I converted the PS to Open type with FontXchange but FAP did not recognise them, perhaps because they were faulty in the first place! I Ran Font Doctor again and it showed problems with the Resource Forks and requested removal. I ran FAP again to verify fonts and this time identified them as "Fonts with Errors"
Since these fonts are functioning under CS2 I conclude that OSX font refinements are making these fonts obsolete due to changes in Creator code/File type details. I cannot understand why PS fonts should be a problem but you may well know something I do not.
I shall try a Utility called Font Shuffler which allows these file types to be changed or repaired. Thank you for the quick response Bob and I shall keep this post open until I get a fix.
Cheers.

Why is my text messaging app is not working at all, is a blank screen? Help!!!

My text messaging app is not working at all is a blank screen when I open it! Help!!!

Abdussalam.A,
you mentioned that Terminal does not work at all for your MacBook Pro. What currently happens when you run Terminal? In what way does it not work?

Can not import my wav. file, message "unable to decode and import selected wav/mp3 file"

Please help, i don't know how to import my wav file. I checked to see if the settings are compatible
and it seems like them are. The wav file im trying to import is: 88kbps, 11kHz...

I don't think so, if its not how do I get it to be?
(Embedded image moved to file: pic07711.jpg)
Jackie Stjepanovic
Trainer
Staff Development
Automobile Customer Service (ACS)
(310) 781-4627
                                                                                Captiv8r
             <[email protected]
             >                                                          To
                                       Jackie Stjepanovic
             11/23/2010 08:56          <[email protected]>
             AM                                                         cc
                                                                                Subject
             Please respond to         Can not import my
             clearspace-974018         wav. file, message "unable to
             851-110472-2-3295         decode and import selected wav/mp3
             [email protected]         file"
                 dobe.com
Is it PCM encoded?
Cheers... Rick
http://www.robowizard.com/pc.gif
Helpful and Handy Links
http://www.gooberguides.com/ProductPages/Captivate/Captivate5Foundations.htm
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=5
http://www.ShowMeSolutions.biz
http://sorcererstone.wordpress.com/
http://www.gooberguides.com

Photoshop CC locking up saying "Reading Camera Raw Format" when opening file from Lightroom

When I open a file from Lightroom, CC opens and asks about sending data to Adobe, and no matter what answer you give the program locks up at the "Reading Camera Raw Format" prompt.

What files from which camera do you use? Where are they stored? What system? Are Lightroom and Photoshop properly updated and use the same RAW settings? Provide more info.
Mylenium

Why can I receive messages but can't send any

I have a iPhone 3GS I can receive SMS messages but cannot send any please help also why does my screen look like this at the top and why do my keys stick

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try all of those, then if there are still issues, provide specifics of what is occurring.

Why is my Macbook Pro unable to read Adobe Photoshop CS5 Extended cd?

Everytime I load the cd, I hear the cd run, but nothing opens. I do not understand why this is happening. Please help

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Why do I receive message "unable to read some or all of these files" in Lightroom 4

Similar Messages

Maybe you are looking for