Why do I receive messages with only a date, no subject, no from, no body, etc.?

at varying times I receive messages with a blank subject, no entry in [from, to] no body, but a date in 1969.
Any ideas why I receive these?

Thank you for your help.
I tried emptying the inbox, deleting the 2 files, and restarting TB.
I did the same for Sent and Trash.
I also deleted all .msf files for all inbox sub-folders and for all folders and sub-folders under "My Mail".
the problem persists.
My inbox has many sub-folders and sub-sub-folders should those be moved to My Mail?
Another problem I am having. I do not know if it is related.
I have a stack of filters that move incoming mail into folders. The stack ends with 2 filters.
(1) a filter that checks whether FROM is from someone in my mail lists. It then moves the message into a folder called "Known Sender".
(2) a psuedo-ELSE filter that check whether the subject contains a very improbable string. It put the message in a folder called ") Suspicious".
Sometimes I still end up with folders in Inbox that clearly should be in the two folders, "Known Sender" or ") Suspicious".

Similar Messages

TS2755 Does anyone know why: when using Messages on my iPad, a cannot send a message with only text on it? Strange though, I can send a message with text AND a photo??

Does anyone know why, when using Messages on my iPad, a cannot send a message with only text on it? Strange though, I can send a message with text AND a photo??

Hi Cass,
If you are having issues with Messages on your iPad, you may find the following article helpful:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Regards,
- Brenden

Why am I receiving message to play a movie from iTunes account "cannot play movie". It say not authorized to play protected movie.

Why am I receiving message to play a movie from iTunes account "cannot play movie". It say not authorized to play protected movie.

In a different post, you asked:
Phase10117 wrote:
So r u telling me that I can only look at a movie from my iTunes account on the device that it was download from. This doesn't set very well me. U should b able to your purchase movies from your cloud. Is apple working on this resolution?
There is no resolution needed, as this is not a problem.
I am saying not the device, but the Apple ID is what needs to be the same, unless the movie is rented.
If the movie is rented, it can only reside on one device at a time. But from your error message above, I don't think that is your situation.
Your error message suggests a different Apple ID purchased the movie. If you want to see it, you must use your computer's iTunes, go to Store > Authorize This Account in the iTunes menu on your computer, and have that purchaser sign in with their Apple ID and password, then sync your iPad to that computer.

Received message with invalid client_id

I am running a Mac Mini Server with Mac OSX 10.7.3 Server and when I log in with a client (also a Mac Mini running Lion OSX 10.7.3) I see this in the system log. Everything is working fine but I don't understand why I recieve these messages.
Feb 23 12:28:15 server AppleFileServer[558]: received message with invalid client_id 462
Feb 23 12:28:15 server AppleFileServer[558]: received message with invalid client_id 463
Feb 23 12:28:17 server AppleFileServer[558]: received message with invalid client_id 470
Feb 23 12:28:17 server AppleFileServer[558]: received message with invalid client_id 471
If I log in with an older Mac Mini running Snow Leopard I don't see these messages. I tried this with another Mac Mini running the same Lion 10.7.3 and I see the same messages (different id numbers).
Anybody have an idea why this is happening?
Thanks,
Tony

You may find the solution here:
https://discussions.apple.com/thread/3602806
SQL

Received message with invalid client

Logs on one Lion 10.7.5 machine are full of
dscl[48193]: received message with invalid client_id 3
The PID keeps incrementing but the client_id is always 3
Googling mainly leads back to:
https://discussions.apple.com/message/18643232?searchText=Received%20message%20w ith%20invalid%20client#18643232
But this system isn't using LDAP. I found one post that suggested stopping and restarting AFP, but:
macbook:~ joliver$ sudo serveradmin stop afp
afp:error = "CANNOT_LOAD_BUNDLE_ERR"
macbook:~ joliver$ sudo serveradmin start afp
afp:error = "CANNOT_LOAD_BUNDLE_ERR"
Any ideas?

You may find the solution here:
https://discussions.apple.com/thread/3602806
SQL

Wanting to connect an older G4 Powerbook running OS 10.4.11 to a Marantz SR4023 receiver amplifier with only RCA inputs to play iTunes through it on stereo speakers. Can anyone advise how to do this?

Wanting to connect an older G4 Powerbook running OS 10.4.11 to a Marantz SR4023 receiver amplifier with only RCA inputs to play iTunes through it on stereo speakers. Can anyone advise how to do this? Not tech savvy at all here, and will be happy with a simple hard wired connection. The Powerbook is old, and I no longer want to use it for anything but connecting iTunes radio, and my iTunes library to my stereo system.

Hi,
There were many PowerBook G4 models (http://support.apple.com/kb/HT3065) with different ports (http://support.apple.com/kb/ht2369).
If necessary, a manual can be found here:
http://support.apple.com/manuals/#PowerBook%20G4
Generally speaking, the output of a headphone port can often be used for the connection to an amplifier. You would need an appropriate cable (typically, 3.5 mm stereo plug to two RCA plugs). Choose a suitable amplifier input (high level). Do verify the allowed amplifier input voltage levels and the impedance before you connect.
Jan

Message Bridge error "Received message with no URI property"

I have created a message bridge between two weblogic JMS servers on different domains.
          Message bridge has source and destinations.
          I have tested each ques seperately with MDB deployed on each server.
          When i am putting message on source que then i am getting this error "Received message with no URI property"
          It would be grat help if some could tell me what might be going wrong.
          Thanks
          Akash

Hi,
          This exception indicates a failure to establish a JNDI context for either the source or target destination host. Check if the the bridge's configured URLs for both are correct. I'm not 100% sure, but it is likely that no URL need be configured for destination's that are in the same cluster as the bridge.
          For more information, I suggest looking at the Messaging Bridge FAQ, which contains some troubleshooting tips. You can find a link to it here:
          http://dev2dev.bea.com/technologies/jms/index.jsp
          Tom Barnes, BEA

HT3529 I am confused about messaging. Shouldn't I be able to send and receive messages with cellular data off? I can usually send the message, but often do not receive messages until I either have wifi or turn cellular on.

I am confused about messaging. Shouldn't I be able to send and receive messages with cellular data off and without wifi? I can send the message but often do not receive messages from others, iPhone or other, until I turn on cellular or wifi.

Depends on the type of Message.
SMS messages will send and receive with data off. and while you can guarantee you send using SMS you cannot guarantee that whoever replies to you does also. They may be replying thorugh iMessage if they are using iPhones.
However Android should be sending through SMS.
You can turn off iMessage if you want to, though people with limtied SMS text messaging in their plans may not appreciate it, and stop messaging you.

I have a macPro 10.6.8. i have been receiving mail with the same date--March 14 and the same time--8:51am..I cannot correct:who knows the solution?

I have a macPro 10.6.8. i have been receiving mail with the same date--March 14 and the same time--8:51am..I cannot correct:who knows the solution?
Thank you.

You may need to replace the Pram battery.

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013
Newform.aspx of list:-
Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?

Hello dcakumar,
Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
- Dennis | Netherlands | Blog |
Twitter

B1iSN - sender and receiver message with different tesk

Hi all,
I have a question regarding the B1i.
Is it possible to have the receiver will have a different task then the sender?
My scenario is:
The user creates a Delivery note in company "a",
The B1i creates an Invoice from that Delivery Note in company "b".
now I want to update the Delivery note with the DocEntry of the created Invoice.
I copied all other fields to my receiver message.
My problem is that I want on the event of "Create Invoice" in company "b" to update a Delivery note in company "a".
I tried doing in 2 ways:
one is in the xsl file I wrote the <QueryParams> element. Then I got this error: The business object already exists
The second is without the <QueryParams> a new Invoice was created (but i wanted the existing one to be updated).
Is it possible to do this in the B1i? How?
Thanks in advance!
Chana

Hi Chana,
Did you configured the biu to "Update on Exist"??? (Guide 03 Extensibility, section 2.14)
You can have a look to the B1iSN 8.8 B12B1 Intercompany scenario in order to see how it is done (B1iSN 8.8 is already in GA). In that scenario the Subsidiary PO is updated with the number of the SO when the SO created by B1iSN in the Headquarters.
Regards,
Trinidad.

Why do I receive message "unable to read some or all of these files" in Lightroom 4

I am getting this error message with my memory card. Does anyone know what I might do? Thanks Larry

Hi
I am having the same problem. I have checked my card reader, disk space, external drive space etc etc and have had no success. I have attempted to use my camera connection instead of card reader and still the same error comes up. I am able to physically copy the files to the hard drive by copy and paste in OS and the files are on my drive. Still lightroom wont read them on import. I had no trouble firing up the old laptop (windows based) and using windows to backup these files from card reader to external hard drive and then opening them in photoshop elements and ACR. I shoot both RAW and JPEG and it seems that it is only the CR2 files that it cannot read however I have lightroom set that it recognises the RAW and JPEG as one file. I found (possibly on this forum somewhere) that it may be a permissions error. Even though I have had no recent updates from apple that I know of I have run "repair permissions". This too has not helped. I am still on the trial period of lightroom as my computer is new in the last month and able to run lightroom now.
I am out of ideas.... Any suggestions would be greatly appreciated!!
Cheers
Emily

Why i cant receive messages

i cant receive messages but i can able to sent, and it keeps on asking me a password
and i don't know which password must i put. and if i put any password it says password
Login to server mail.tshelete.co.za failed.

It would be your email providers server asking for your email password. Work with your provider if you do not know your password.

Could anyone post examples about sendingand receiving messages with SOAP

I am newbie, and want to learn SOAP. Anyone can tell me
where to find many examples about communication between client and server
based on SOAP. The example is in java code should be best.
Many thanks in advance

Java tutorial at http://java.sun.com/webservices/docs/ea1/tutorial/doc/JAXM.ws.html#63873
should be a good starting point.
I have sample code, which creates SOAP header and SOAP elements. THis code gives an idea to create SOAP messages and to parse the SOAP response. Hope this helps.
I pass Application ID and password in SOAP header, used by the Webservices provider to verify my application. In the SOAP elments, I pass a string (called ticket) and ip address. Web services provider will verify the string and return the response along with some attributes related to the user (extended attributes).
import javax.xml.soap.*;
import javax.xml.messaging.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
import java.io.*;
import java.net.*;
import com.sun.net.ssl.internal.ssl.*;
public class AuthenticateTicket extends HttpServlet{
private static ServletConfig Config;
//always use this Name space
private static final String AUTH_WS_NS = "http://some.url.com/ws/";
// parameters to get the properties for AUTH
private static final String AUTH_LOGIN_URL = "http://some.url.com/loginpage/" + "?izAppId=AUTHappl";
private static final String AUTH_WS_URL ="http://some.url.com/loginpage/v4.asmx";
private static final String AUTH_CLIENT_APPL_ID = "AUTHappl";
private static final String AUTH_CLIENT_APPL_PSWD = "AUTHappl";
* init
* @param ServletConfig
* @return void
public void init(ServletConfig config) throws ServletException {
     Config = config;
* service
* This is where the servlet get invoked.
* @param HttpServletRequest
* @param HttpServletResponse
* @return void
* @throws ServletException
* @throws IOException
public void service(HttpServletRequest request, HttpServletResponse response)
     throws ServletException, IOException {
System.out.println("------- service() AuthenticateTicket -------");
     String host = request.getRemoteAddr();
     String izTicket = request.getParameter("izTicket");
     String izStatus = request.getParameter("izStatus");
if (host == null || host.equals("localhost") || izStatus == null || izStatus.trim().equals("") ) {
response.sendRedirect(AUTH_LOGIN_URL);
else if (izTicket != null){
          verifyAUTHTicket(host, izTicket);
          RequestDispatcher rd = request.getRequestDispatcher("/jspPage1");
          rd.forward(request, response);
          return;
     else {
          System.out.println (" NOOOOOOOOO TICKET ");
          RequestDispatcher rd = request.getRequestDispatcher("/jspPage1");
          rd.forward(request, response);
* <code>createSOAPMessage</code>
* Create the standard AUTH Soap Message.
* This is used during the verifySession process. It creates the message with
* the returnAllAttriutes = true;
* @param String host
* @param String ticketStr
* @return SOAPMessage
* @throws Exception
private static SOAPMessage createSOAPMessage(String host, String ticketStr) throws Exception{
MessageFactory msgFactory = MessageFactory.newInstance( );
SOAPMessage soapMessage = msgFactory.createMessage();
          soapMessage.saveChanges();
// Obtain references to the various parts of the message.
SOAPPart soapPart               = soapMessage.getSOAPPart();
SOAPEnvelope soapEnvelope     = soapPart.getEnvelope();
SOAPBody soapBody               = soapEnvelope.getBody();
SOAPHeader header               = soapEnvelope.getHeader();
//********** HEADER PART **********
Name headerName = soapEnvelope.createName("wsConsumerCredential", "", AUTH_WS_NS);
          SOAPHeaderElement hdrElem = header.addHeaderElement(headerName);
Name authId = soapEnvelope.createName("id");
Name authPwd = soapEnvelope.createName("password");
SOAPElement idElem = hdrElem.addChildElement(authId);
          idElem.addTextNode(AUTH_CLIENT_APPL_ID);
SOAPElement pwdElem = hdrElem.addChildElement(authPwd);
          pwdElem.addTextNode(AUTH_CLIENT_APPL_PSWD);
//********** BODY PART **********
// Create the <VerifySession> body elements.
Name verifySess = soapEnvelope.createName("VerifySession", "",AUTH_WS_NS);
SOAPBodyElement verifySessBOS = soapBody.addBodyElement(verifySess);
// Create the child elements under the <VerifySession> elements.
Name ticket = soapEnvelope.createName("ticket");
Name userIP = soapEnvelope.createName("userIpAddr");
Name extendedAttr = soapEnvelope.createName("returnExtendedAttributes");
SOAPElement ticketBOS = verifySessBOS.addChildElement(ticket);
SOAPElement ipBOS = verifySessBOS.addChildElement(userIP);
SOAPElement exAttrBOS = verifySessBOS.addChildElement(extendedAttr);
//ticket string
ticketBOS.addTextNode(ticketStr);
ipBOS.addTextNode(host);
//boolean, do we want extended attr?
     exAttrBOS.addTextNode("true");
          soapMessage.saveChanges();
soapMessage.writeTo(System.out);
return soapMessage;
* <code>parseSOAPResponse</code>
* Parse the standard AUTH Soap Response
* This is used to parse through the AUTH response to gather all the necessary user
* information.
* the returnAllAttriutes = true;
* @param SOAPMessage
* @return User
* @throws Exception
private static void parseSOAPResponse(SOAPMessage response) throws Exception{
String uid, firstName, lastName, email, bolID;
System.out.println (" ============ RESPONSE IS: ====================");
response.writeTo(System.out);
          SOAPPart sp = response.getSOAPPart();
SOAPEnvelope soapEnvelope = sp.getEnvelope();
SOAPBody sb = soapEnvelope.getBody();
Name cName = soapEnvelope.createName("VerifySessionResponse","", AUTH_WS_NS);
Iterator it = sb.getChildElements(cName);
SOAPBodyElement verifyResponse = (SOAPBodyElement)it.next();
//System.out.println(" got verifyResponse");
it = verifyResponse.getChildElements(); //iwsResponse
SOAPElement iwsResponse = (SOAPElement)it.next();
//System.out.println(" got iwsResponse");
cName = soapEnvelope.createName("action");
String actionStr = iwsResponse.getAttributeValue(cName);
cName = soapEnvelope.createName("hasErrors");
String hasErrorsStr = iwsResponse.getAttributeValue(cName);
          if (actionStr != null && actionStr.equals("Verify") && hasErrorsStr != null
          && hasErrorsStr.equals("false")) {
SOAPElement info = null;
cName = soapEnvelope.createName("sessionInfo","", AUTH_WS_NS);
info = (SOAPElement)iwsResponse.getChildElements(cName).next();
System.out.println (" name is: "+ info.getElementName().getLocalName() + "----" + info.toString());
cName = soapEnvelope.createName("status");
String status = info.getAttributeValue(cName);
System.out.println (" status : " + status) ;
          if (status == null || status.indexOf("Active") < 0)
               throw new Exception("Session not Active");
               SOAPElement userData = null;
cName = soapEnvelope.createName("userAttributes","", AUTH_WS_NS);
userData = (SOAPElement)info.getChildElements(cName).next();
System.out.println (" ===> got user Data ");
cName = soapEnvelope.createName("attribute","", AUTH_WS_NS);
it = userData.getChildElements(cName);
SOAPElement attr = null;
cName = soapEnvelope.createName("accounts","", AUTH_WS_NS);
userData = (SOAPElement)info.getChildElements(cName).next();
System.out.println (" ===> got user Account Data ");
cName = soapEnvelope.createName("account","", AUTH_WS_NS);
it = userData.getChildElements(cName);
SOAPElement account = null;
String loginIDStr=null, typeStr=null, statusStr=null;
while (it.hasNext()){
account = (SOAPElement) it.next();
cName = soapEnvelope.createName("loginId");
loginIDStr = account.getAttributeValue(cName);
cName = soapEnvelope.createName("type");
typeStr = account.getAttributeValue(cName);
cName = soapEnvelope.createName("status");
statusStr = account.getAttributeValue(cName);
     if (statusStr.equals("Authenticated")) {
          System.out.println("\n\nAuthentication successful");
     else {
          System.out.println("\n\nAuthentication failed");
* <code>verifyAUTHTicket</code>
* this is for verifySession call to AUTH; It controls the flow with AUTH.
* @param String host
* @param String ticketStr
* @return User
* @throws Exception
public static void verifyAUTHTicket(String host, String izticket) {
     SOAPConnection conn =null;
     try {
//Creat a message
          Provider provider = new Provider();
          java.security.Security.addProvider(provider);
SOAPMessage message = createSOAPMessage(host, izticket);
// Get a SOAP connection from the connection factory.
SOAPConnectionFactory connFactory = SOAPConnectionFactory.newInstance( );
// set the default security protocol (shipped with JSSE1.0.2)
          System.setProperty ("java.protocol.handler.pkgs", "com.sun.net.ssl.internal.www.protocol");
// add the default security provider (again, in JSSE1.0.2)
//          java.security.Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider() );
conn = connFactory.createConnection( );
// Define the message destination.
URLEndpoint destination = new URLEndpoint(AUTH_WS_URL);
// Send the message and wait for the response.
SOAPMessage response = conn.call( message, destination );
parseSOAPResponse(response);
} catch (Exception ex) {
ex.printStackTrace();
// Close the connection.
finally{
try{
if (conn != null){
conn.close();
catch (SOAPException se){
}

I can't send and receive message with my 3GS french iphone with the iOS5. What can I do?

I have install the new iOS5 and now i can't send or receive message. What can i do to resolve this problem? Can I downgrade to the iOS 4.3.5 and where can i find the information to do that

MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os
http://www.apple.com/support/macbookpro
This is helpful Mail Setup Wizard:
http://www.apple.com/support/mail
This, is not forum for notebook owners.
I would post in Mountain Lion : Mail

Why do I receive messages with only a date, no subject, no from, no body, etc.?

Similar Messages

Maybe you are looking for