Why do I receive the message: VI stopped @ node 0X239C of subVI AI SingleScan?

Whenever I run AI SingleScan, I get the following error message: "An exception occurred within the external code called by a Call Library Node. This may have corrupted LabView's memory. You should save any work to a new location and restart LabView. VI "Untitled" was stopped at node 0X239C of subVI "AI SingleScan (single-point waveform.vi)". I've done what it says, save and restart the program, but still get the message. I'm running LabView 6.1 on Win XP. Thanks.

Hello,
The most direct cause of this problem is due to a possible corruption that has occurred in the copy of the DAQ driver installed on your machine.
It could also be related to the way that you are calling the VI. I recommend opening a LabVIEW example called Cont Acq&Chart (hw timed).vi, changing the AI Single Scan VI type to Single-Point Waveform, setting the correct parameters and running. You can select the type of the VI by right-clicking on it and going to Select Type.
If it turns out that you will have to reinstall the driver, make sure that you first uninstall from Add/Remove Programs, and then reinstall the driver. You can get the latest version from ni.com at http:/
/www.ni.com/support/daq/versions.
I hope this helps.
Jared A

Similar Messages

  • Why am i receiving the message "ipod could not be synced because connection to ipod was lost" when trying to transfer a downloaded library audiobook to my ipod, please?

    why am i receiving the message "ipod could not be synced because connection to ipod was lost" when trying to transfer a downloaded library audiobook to my ipod, please?

    - Reboot the computer
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Try another cable. !
    - Try another USB port
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.

  • Why do I receive the message "this apple ID had not been used in itunes store " when  I try to install an appliance.

    Why do I receive the message "this Apple ID had not been used in itunes Store" When I try to install an appliance

    Unless the instructions on this page are followed when creating an account : http://support.apple.com/kb/HT2534
    then credit card details will need to be entered before the account can be used to download any item from the store.
    You could see if this post by mountaingoatgirl lets you review your account without needing to enter credit card details : https://discussions.apple.com/message/24303054
    If not then you will need to enter credit card details (which you should be able to remove after entering them) or create a new account

  • Why do I receive the message on my Macintosh,"You can't open the application because Power PC applications are no longer accepted"?". At one time the software worked so I'm confused.

    Why do I receive the message on my Macintosh,"You can't open the (name of application) application because Power PC applications are no longer accepted"?" At one time the Mac software worked so I'm confused. Fore example I tried to open Concorder Pro snd it gave me the message.

    From a recent post I answered for a similar question about the lack of PowerPC app support in Mt. Lion:
    Unfortunately you got caught up in the minor miracle of Rosetta.  Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
    However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion).  While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
    Workarounds:
    1. If your Mac will support it, restore OS X Snow Leopard;
    2.  If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion;
    3.  Upgrade your software to Intel compatible versions if they are available, or find alternative software that will open your data files, modify them and save them;
    4.  Install Snow Leopard Server (with Rosetta) into Parallels or VMWare Fusion.  Apple is now selling Snow Leopard Server for only $19.99 + sales tax & shipping; call 1.800.MYAPPLE (1.800.692.7753).    This solution will give you concurrent use of your PowerPC applications and access to Lion or Mt. Lion.
    [Concorder Pro running in Snow Leopard Server installed into Parallels for use in Lion and Mt. Lion]:
                                  [click on image to enlarge]
    NOTE:  Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization
    More information here:
    http://forums.macrumors.com/showthread.php?t=1365439

  • Why has not received the message about the change secret Questions?

    Why has not received the message about the change secret Questions on my email?

    Be patient. You don't get an immediately notification email. Record the Claim Number somewhere in case something goes wrong. It can take up to 72 hours. I got mine in about 54 hours.

  • Why am I receiving the "Unfortunately, Messaging has stopped" error message and how do I fix it?

    Why am I receiving the "Unfortunately, Messaging has stopped" error message and how do I fix it?

    I am so upset. Please read my messages from my postings. This has nothing to do with SIM Card, Hard Reset, Apps, Google Gmail Account, nothing. I have gone thru all of this and NOTHING has fixed this. I went to the store today and spoke to the manager on duty. He said he had to try and duplicate the problem before he could help me. I showed him "screen captures" I did, told him it's out here on the board, etc. etc. Needless to say I ended up coming home with the same phone, "he" erased the phone and started over again. Well guess what, it's not a error with "MY" Gmail account being corrupted because if that is the case Mrs. Hayden14 has a bad Gmail account too. If you guessed it, the phone just crashed again! I was able this time to capture a report with ALL the history in it and saved screen captures to PROVE to him this is not a joke. Even the report says "Crash". This time it was something else I don't even or ever have used. I have also wasted over a day , yes a full work day on this without question.
    I have had to get the run around for the last day. This is totally ridiculous, including them putting me on hold for 55 min. Oh, that's another funny story. Anyways, tomorrow morning I am going to the Verizon store one last and final time and I hope they decided to do the right thing and give me a phone that does not crash and works. It would be handy at work for me, especially where I work at. I hope hope hope someone listens to and helps me. I would love for them to see me walk in, take my phone and say to me were going to get you another phone, hand it to me, see if it works and prove it's the device. I don't hear anyone having this issue on other phone types so sounds like its the phone type.
    I have had 3 phones now in the matter of 2 weeks. I am sure the FedEx charges will add up to a cost of a new phone at some point and start to outbalance your requirement to give me the same phone when it has the same problem.
    Can't wait to see what happens tomorrow.

  • TS2811 After updating to ios 6 my phone had to be restored.  Now it will not acitvate.  I am receiving the message that ther server is unavailable.  However, I can not use my phone at all until it is activated.  why can I not activate?

    After updating to ios 6 my phone had to be restored.  Now it will not acitvate.  I am receiving the message that ther server is unavailable.  However, I can not use my phone at all until it is activated.  why can I not activate?

    Well, 99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
    So, either get a sim card from the carrier your phone was originally locked to, or get it officially unlocked.

  • Why am i receiving error message "the ipod cannot be synced. an unknown error occurred (13019)" when i try to move a song from my itunes library into my music folder on my ipod touch?

    Why am I receiving the following message when I try to move a song from my iTunes library into my iPod touch's music folder?
    "The iPod cannot be synced. An unknown error occurred (13019)."
    It was working just fine.  Then all of a sudden this error message popped up.

    Try here:
    iTunes: Error 13019 during sync

  • I cannot download OS X Mountain Lion, I get an error message that says: "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed." Why am I receiving this message?

    I cannot download OS X Mountain Lion, I get an error message that says: "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed." Why am I receiving this message?

    Servers may be overloaded.
    One user reported:
    Deleted file com.apple.appstore in /var/folders/, dissabled VirusBarrier X6: problem solved!

  • Upon sync or backup, I receive the message, "iTunes could not back up the iPhone "iPhone name" because and error occurred. I have deleted my backup file and tried another computer, with no success.  Also, the bluetooth function stopped working.

    Upon sync or backup, I receive the message, "iTunes could not back up the iPhone "iPhone name" because and error occurred. I have deleted my backup file and tried another computer, with no success.  Also, the bluetooth function stopped working.

    Hi, EJ13. 
    I see you are having issues with backing up you iPhone and have tried a couple troubleshooting steps.  There are a couple more steps I could recommend in the article below. 
    iOS: Troubleshooting backup issues in iTunes
    http://support.apple.com/kb/ts2529
    Regards,
    Jason H. 

  • The photos in my photo stream removed and it says you don't have enough storage and your device why I am receiving this message and why my photos erased from photo stream

    The photos in my photo stream removed and it says you don't have enough storage and your device why I am receiving this message and why my photos erased from photo stream

    Try deleting the old backup.
    Settings>iCloud>Storage & Backup>Manage Storage, tap the device name and on the resulting screen, scroll down and tap on Delete Backup.

  • Why do I receive the following message when I try to sync my itouch, "this ipod cannot be used because apple mobile device is not started?

    why do I receive the following message when I try to sync my itouch, "this ipod cannot be used because apple mobile device is not started?

    See Here
    AMDS for Windows
    http://support.apple.com/kb/TS1567

  • Why I receive started 2 hours the message that I must put my password on Iclod for my apple id and when I put the password I receive the message that the paswor is not god!What can I make in this case?Please help me

    why I receive started 2 hours the message that I must put my password on Iclod for my apple id and when I put the password I receive the message that the password is not god!What can I make in this case?Please help me

    Hi it sounds like a scam delete Email
    bsydd uk

  • Why when opening an application I receive the message "you must connect to a wi-fi or a cellular data network"?

    Hi
    When I try to open a radio application I receive the message "you must connect to a wi-fi or a cellular data network"
    My iPhone is regularly connected to my wi-fi and works regularly with any other connection.
    What can I do?

    Shut down and restart the app...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Tap and hold any icon until they wiggle
    - Press the red to delete the offending app from this list.
    - Press the home button twice when done.
    - Restart the app

  • Every time I download google earth and try to use it I received the message cannot connect to server why

    I have problem on using google earth on my iPad and my MacBook Pro
    All the time I received the message cannot connect to server

    Sometimes the sign-in process goes kablooey for whatever reason. It can usually be remedied by tapping the options icon (the cogwheel out in the project selection user interface; upper right) > My Account. Sign in that way and you should be able to get everything going again. I just did it on my Google Nexus 7 2013 with no problems.

Maybe you are looking for