Why do I receive the software Licence Agreement now when I try to open itunes on my PC?

I am a bit worried about ticking the box, as I have just had £21.99 refunded on a debit that I knew nothing about.  If I tick this box is it going to cost me money again?  I am a pensioner and don't use itunes very much, but I do still like to use it sometimes.  I have an ipod that I use with ipod speakers at home.

McAfee AntiVirus by any chance? See the thread Why does iTunes delete my itunesprefs.xml? Either way ticking the agreement is OK.
I'm also slightly suspicious of your refund. Are you sure that wasn't an attempt to obtain your Apple ID username and password? Might be best to sign in, change your password, and review your recent purchases to make sure nothing unexpected is there.
tt2

Similar Messages

  • I tried to update to the most recent itunes, but the update failed and now when I try to open itunes a dialog box pops up and tells me that it can.t open because MSVCR80.dll is missing.  I need help!

    I tried to update to the most recent version of itunes but the update failed.  Now when I try to open itunes I get a dialog box telling me it can,t open because MSVCR80.dll is missing.  I tried uninstalling and reinstalling itunes but I grt the same message.  What can I do to fix this?

    Solving MSVCR80 issue and Windows iTunes install issues.
    Thanks to user turingtest2 for this solution.
    Solving MSVCR80 issue and Windows iTunes install issues.
    If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    You may be required to boot into safe mode to complete the folder deletion process.

  • I tried to update iTunes yesterday.  The update failed.  Now when I try to open iTunes it says that the version isn't localized and needs to be run in English.  It has never been in another language.

    I attempted to update iTunes yesterday.  The update failed.  iTunes now won't open and displays an error message that the program isn't localized and needs to be run in the English version.  I'm in the US and the computer and program has never been used in another language.  I tried reinstalling the full download for the new version and that failed as well.  I logged out; shut down; restarted; retried the update; etc.  Still no luck and the same message.  Thoughts?

    Solving MSVCR80 issue and Windows iTunes install issues.
    Thanks to user turingtest2 for this solution.
    Solving MSVCR80 issue and Windows iTunes install issues.
    If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    You may be required to boot into safe mode to complete the folder deletion process.

  • I created an image in Photoshop and saved it as the PSD file. Now when I try and open it it says it is not compatible with my version. How could this be when I created it in this version?

    I created an image in Photoshop and saved it as the PSD file. Now when I try and open it it says it is not compatible with my version. How could this be when I created it in this version?

    That depends on why it won't open.  Most of the time it means the file is corrupted and unlikely to be recovered. If you saved it right after adding or copying a LOT of layers - then it might just be the layer limit and we can attempt to recover it.

  • I installed new software updates, and now when I try to open up pages it tells me "Pages cannot be opened because of a problem." does anyone know what I can do?

    I installed new software updates, and now when I try to open up pages it tells me "Pages cannot be opened because of a problem." does anyone know what I can do?

    1)Copy this below from --{code} to --{code}
    --{code}
    set p2l to "" & (path to library folder from user domain)
    set the_cache to p2l & "Caches:com.apple.iWork.fonts"
    tell application "System Events"
              set maybe to exists disk item the_cache
              if maybe then delete disk item the_cache
    end tell
    if maybe then
              display dialog "I deleted the file :" & return & the_cache
    else
              display dialog "The file :" & return & the_cache & return & "was unavailable !"
    end if
    --{code}
    2) Than open Applescript Editor in your applications and paste it
    3) Than select "Compile"
    4) Than select "Run"

  • I recently transfered everything from my emac to another one but now when I try to open iTunes I get the window that states: The file "iTunes Library" cannot be read because it was created by a newer version of iTunes.

    I recently transfered everything from my emac to another one but now when I try to open iTunes I get the window that states: The file "iTunes Library" cannot be read because it was created by a newer version of iTunes. The computer I transfered to had a bunch of files on it and I got full ownership of what was already there, so, how do I get to my iTunes library, I do have access as an administrator to the iTunes library (that works just fine) already there and I guess I must have had a newer version ofiTunes on my defunt eMac....

    Tell us some version numbers please, of your Mac OS versions and iTunes versions on both computers (two eMacs yes?).
    dlrobinson49 wrote:
    I guess I must have had a newer version ofiTunes on my defunt eMac....
    That is a pretty good guess.Try updating the second eMac's iTunes to at least the version that was on the first.

  • Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

    Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions for a non techy person?

    See Troubleshooting issues with iTunes for Windows updates.
    Try the repair tip in the third box first.
    tt2

  • Just downloaded new verion of ITunes, now when I try to open ITunes get This copy is corrupted or is not installed correctly. Please reinstall ITunes. Running XP. I do not want to lose everything I already have on ITunes.Does anyone know what the solution

    Just downloaded new verion of ITunes, now when I try to open ITunes get This copy is corrupted or is not installed correctly. Please reinstall ITunes. Running XP. I do not want to lose everything I already have on ITunes.Does anyone know what the solution might be?

    Hi, oldcrow13.
    Thank you for the response.  Typically this error is caused by installing an older verison of iTunes than you had prior.  When you installed iTunes did you download the program directly from iTunes.com, or did you use an older copy of the program on your computer?  If you used an older version or are unsure, uninstall all the components one more time and download a new copy of iTunes via the link below. 
    iTunes for Windows
    http://www.apple.com/itunes/?cid=OAS-US-DOMAINS-itunes.com
    Jason H.

  • I can access and use the store just fine - but when I try to open iTunes HELP, I just get a blank/white Help box. Any thoughts or ideas? Dee

    Not sure if I have to repeat question, but I cannot access the iTunes HELP from the Store on my PC (Dell laptop/Windows 7) - opens the box, but it remains blank/white, never fills in with HELP information. Any thoughts? dee

    I would check with HP. Your scanner may need a firmware update and updated HP software. Start here:
    http://www8.hp.com/us/en/hp-search/search-results.html?qt=LaserJet+m1217nfw+MFP& cc=us&lang=en&charset=utf-8&qp=&hpn=&hpa=&hps=&hpr=&cat=&current_url=CSSres
    then here:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=4075472

  • I lost fast dial when I lost the internett the other day. and now when I try to open it says up in the tab: chrome://fastdial/c...tent/fastdial.html. how can i fix this?

    I was with the computer in a place without internett and then I went on the internett (mistake, i do it because its like a impuls to press the internett butten), and then when I came home fast dial was like '' this is embarrassing. We cant open up the tabs you have been using before you lost the internett'' or something like that, and that have happened before, but then i clicked the go back to fast dial, but this time I did not do that. How can I get back fast dial?

    After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
    b0n0b0
    Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
    Mar 15, 2014 9:05 AM (in response to Terence Devlin)
    Got it! Thanx.  What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed.

  • TS1424 i have just done the latest itunes update and now have the following message come up when i try to open itunes

    i have just installed the latest update and the following message has come up.  Text box - Unable to locate component.  Message - the application failed to start because MSVCR80.dll was not found.  Re-installing the application may fix the problem.
    I have tried reinstalling  and it has not helped. 
    I have gone to uninstall what ever is installed on the computer but cannot find itunes in the program list but do not want to just delete all apple applications with out knowing what they are.  So, how do i delete the existing itunes program on my compouter??
    I am also hoping that i will be able to do a restor eform the cloud once i get this sorted

    Hello, fletch72. 
    Thank you for the question.  I see you have uninstalled, reinstalled and the error is persisting.  Try one more time uninstalling all components of iTunes in the order specified of the article below.  These steps must be processed in the order specified or the error will persist.  Once this is done attempt to install iTunes again.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    If the issue persists, you will need to process the steps in the article below for each component and reinstall.
    "The feature you are trying to use is on a network resource that is unavailable" alert when removing Apple software in Windows
    http://support.apple.com/kb/TS3704
    Cheers,
    Jason H.

  • The software licence agreement with my new IPOD prohibits use on a non appl

    the software licence agreement with my new IPOD prohibits use on a non apple branded computer (yeah, I know, no one reads these things) therefore, as I read the agreement, I am not allowed to install the software on teh CD that came with my new IPOD onto my computer - Interestingly enough, if I run just the itunes installer from the CD and not the "autorun" file, then I get a different licence agreement.
    Will Apple compuer company please formally state that the supplied software may be installed on a non Apple branded computer

    here is the section to which I was referring - it popped up when I first inserted the CD, and it runs when you install the IPOD updater - see the first sentence.
    2. Permitted License Uses and Restrictions This License allows you to install and use one copy of the Apple Software on a single Apple-labeled device or computer at a time. The Apple Software may be used to reproduce materials so long as such use is limited to reproduction of non-copyrighted materials, materials in which you own the copyright, or materials you are authorized or legally permitted to reproduce. This License does not allow the Apple Software to exist on more than one such device or computer at a time, and you may not make the Apple Software available over a network where it could be used by multiple devices or multiple computers at the same time. You may make one copy of the Apple Software (excluding the Boot ROM code) in machine-readable form for backup purposes only; provided that the backup copy must include all copyright or other proprietary notices contained on the original. Except as and only to the extent expressly permitted in this License or by applicable law, you may not copy, decompile, reverse engineer, disassemble, attempt to derive the source code of, modify, or create derivative works of the Apple Software or any part thereof. Any attempt to do so is a violation of the rights of Apple and its licensors of the Apple Software. If you breach this restriction, you

  • Why do I receive the message "this apple ID had not been used in itunes store " when  I try to install an appliance.

    Why do I receive the message "this Apple ID had not been used in itunes Store" When I try to install an appliance

    Unless the instructions on this page are followed when creating an account : http://support.apple.com/kb/HT2534
    then credit card details will need to be entered before the account can be used to download any item from the store.
    You could see if this post by mountaingoatgirl lets you review your account without needing to enter credit card details : https://discussions.apple.com/message/24303054
    If not then you will need to enter credit card details (which you should be able to remove after entering them) or create a new account

  • HT5622 Hello, I try to register an apple id and i receive the verification email. But when i try to acces the verification link, browser give me a msg with sorry, .... Why this?

    please help

    Hello, I try to register an apple id and i receive the verification email. But when i try to acces the verification link, browser give me a msg with sorry, .... Why this?

  • I updated the latest version of iOS software on my Macbook Pro and now when I try to open up iPhoto it says that I need to update the latest version. But when I go to update, it says the latest version is unavailable to the U.S. I can't access photos

    I updated the latest version of iOS software on my Macbook Pro and now when I try to open up iPhoto it says that I need to update the latest version. But when I go to update on iTunes, it says the latest version is unavailable to the U.S. I wouldn't mind leaving it be but I can't access any of my photos. What do I do?

    stuckoncc wrote:
    I updated the latest version of iOS software on my Macbook Pro
    iOS is on iPhones and iPads.
    Are you using an iPhone or iPad?

Maybe you are looking for