Why do I regularly lose my datebook?

This has happened a few times now.  I am regularly backing up so I can import it back in, but geez....why is this happening? Thought I fixed it as posted here:
http://forums.palm.com/palm/board/message?board.id=windows_hotsync&message.id=50848
But opened up my desktop today to have everything once again completely gone (except a few annual events).  And now I'm back to getting hung up again when I try to sync!  Argh!
Post relates to: Centro (Sprint)

Always be sure to close Palm Desktop 6.2.2 when finished with it - losing data has been reported by others when they shut down their computer, or reboot while the program is still open.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • Why does Firefox regularly lose my add-ons and I have to reset and re-install (Download helper, Status-4-evar, Google Lite)

    I lose the add-ons when Firefox automatically upgrades to the latest version but this is not the only time. It may work for 5-10 days without a problem then without warning or error, it just losess the add-ons, upgrade or no upgrade. This is most annoying as they will not re-download and re-install and all I can do is reset Firefox then re-customise the browser again to my look and feel, then have to download and re-install these add-ons again. It seems like I am doing this continually over and over again.

    Thanks Cor-el but I am with azgirl7 that trying to follow the instructions is not easy. I have had some success by copying all my profiles from C:\Users\Brendan (my name) \AppData\Local\Mozilla\Firefox\profiles to a spare folder I have created. When Firefox updates or changes, I delete the profiles and copy them back from the spare folder. But this does not work every time. All in all, it is very time consuming and one that Mozilla should have an easier method to protect as well restore.

  • Why did I suddenly lose all of the album artwork on my iPad

    Why did I suddenly lose all of the album artwork on my iPad

    You have to work this out with iTunes Support.
    http://www.apple.com/support/itunes/contact/
    You can change the country in the next screen in the upper left if needed. Click on Contact iTunes Store Support under the iTunes Store heading at the top right side of the page. Then click on Purchase, Billing & Redemption in the next screen and follow the prompts.

  • Why do map apps lose voice on navigation when plugged into USB port in cars?

    why do map apps lose voice on navigation when plugged into USB port in cars?

    Hello attempt
    We've see your issue in another 2 posts. Let's focus on 1 post only so others will easily help you.
    Thanks.
    • Click Likes to appreciate those who helps you
    • If your issue solved, mark the best post in your thread as Solution

  • My email accounts regularly lose settings

    My email accounts regularly lose settings. Settings in the Mac mail provider accounts are still there but the configuration data is lost.

    Could you be more specific?

  • Hi.i really need to know why some iphone 5 lose wi-fi or bluetooth comminucations after a while?!? i just charged it with my iphone 4's adapter,it can be the reason?!?!?!?!

    Hi.i really need to know why some iphone 5s lose wi-fi or bluetooth comminucations after a while?!? i just charged it with my iphone 4's adapter,it can be the reason?!?!?!?! i dont think so....

    It would help to have more details about when your phone loses wi-fi or bluetooth. 
    When an iPhone locks itself it turns Wi-fi off.  I haven't had any problems with bluetooth turning off.
    You might try restarting the phone. Double tap the home button to open the multitasking drawer, tap and hold on any icon in the drawer until the icons start to jiggle, tap the X that appears on the upper corner of each icon to shut them all down.  Press the Home button to close the drawer.  Then hold the sleep/wake button down and wait for the Slide to Power Off slider appears.  Slide it and wait for the phone to shut down.  Wait a few seconds and then press and hold the  sleep/wake button again until the Apple logo appears and the phone restarts.
    You can also reset your network settings, go to Settings => General => Reset Network Settings.  You will have to reconnect and enter passwords for any wi-fi networks that you normally connect to after you do this.
    Let us know if this doesn't help.

  • Why  do I randomly lose connection while on the web?

    Why do I randomly lose connection while on the web?

    Yep, that was it!  I removed the auto login and it showed only a single image.
    May I ask how you provided feedback on this issue?  I'd like to do that as well, but I'm not sure how.  Please let me know.
    Karen
    search feedback on start menu or taskbar search.
    you can also locate feedback app at start menu -> all apps., feedback app is also pinned on live tiles by default.

  • Why does Bridge always lose track of the Favorites folders I put into it?

    (Latest version of Bridge)
    I haven't used Bridge in a while because of this problem.
    When you click on one of your Favorites folders in the panel on the far
    left side, the folder comes up with a question mark and it can't find anything!
    Why does this happen?
    Even though the original location of the files or folders was never moved or renamed.. Bridge loses track of the folders I put into it?
    How do I keep it from doing that?

    Here's the boilerplate text referenced by Omke;
    I still advocate Repairing Permissions (with Apple's Disk Utility) before AND after any system update or upgrade, as well as before AND after installing any software that requires an installer that asks for your password.
    I have seen software installations go sour because the installer did not find everything as and where it should be.
    I have also seen software installations go bad because the installer did not clean up after itself properly and did not leave everything as and where it should be.
    This is just my own personal opinion and practice based on my own observations. Others may disagree and that's OK. I can only base my routines and my advice to others on my own experience and conclusion. I don't pretend to know why others believe otherwise.
    Repairing Permissions after the fact (i. e. not immediately before and after an install) may NOT help. Try it anyway, though.
    ====
    Additionally, if your machine does not run 24/7 so that it runs the daily, weekly and monthly Cron Scripts in the middle of the night as intended by Apple, run Cocktail (shareware) as well.
    Cron Scripts are maintenance routines designed by Apple to run on a daily, weekly and monthly basis in the middle of the night.
    If you don't run them, you WILL run into trouble, sooner rather than later.
    Here's an excerpt from the Apple tech doc http://docs.info.apple.com/article.html?artnum=107388
    Mac OS X performs background maintenance tasks at certain times if the computer is not in sleep mode. If your computer is shut down or in sleep at the designated times, the maintenance does not occur. In that case, you may want or need to run these manually.
    Mac OS X periodically runs background tasks that, in part, remove system files that are no longer needed. This includes purging older information from log files or deleting certain temporary items. These tasks do not run if the computer is shut down or in sleep mode. If the tasks do not run, it is possible that certain log files (such as system.log) may become very large.
    Also, from: http://docs.info.apple.com/article.html?artnum=106978
    The disk activity generated by find is a normal part of file system maintenance, used for tasks such as removing invisible temporary files that are used by the system. It is scheduled to occur early in the morning at 03:15 everyday, 04:30 on Saturdays, and 05:30 on the first day of each month.
    NOTE:
    There have been comments to the effect that Apple "fixed" this in 10.4.2 and later versions of the OS, but I have not been able to verify this to my satisfaction. The reference in the 10.4.2 release notes are far from explicit on this subject.
    = = =
    If you have DiskWarrior, run it regularly too.

  • Why do the regular links in template not work on announcement pages?

    I am trying to figure out why the regular links (buttons) on top in my template does not work on the announcement pages on my business catalyst website. The links work perfectly fine on the other pages, but when you click on one of the latest news links  to the right to read it, it leads you to a page with a url-prefix called announcements, and when you try to get back to one of the other pages by clicking on the buttons at the top for example the register button, it takes you to: http://www.littlefolkies.com/announcements/register instead of http://www.littlefolkies.com/register, and so it gives you a error message: page not found...???
    Is there anyone who can help me out? I don't understand why this is happening.
    You can try it yourself at www.littlefolkies.com...
    I greatly appreciate any guidance!
    Thanks so much,
    I

    Take a look at your classes link.
    You can see how you have the / in front and the others do not. This is why.
    This tells BC to read from the site root. Without it when your inside sub folders (other levels in your url) then it will link to only within that level without the / at the front.
    It is the same reason why you do all your templates and css etc with the / in front which I mentioned to you before if I recall.
    You can also change the name /announcements in the url in the settings for it if you want to.

  • Why does it always lose count?

    Hi, all-
    I installed PCI7344 to control steppers. I configed it into open-loop stepper control. In the "Find Reference Setting", I selected the "Smart Enable" and "Reset Position"; Set "Offset move", "Primary Position" and "Secondary Position" to zero.
    Then I run the labview example program "One-Axis Find Reference with Status Monitor.vi" to find home. Of course once the home position is found, the "Position" in "Current Trajectory Data" is reset to zero. Afterwards I moved the stepper through "1-D Interactive".
    Here comes the weird problem. The first time I move the stepper after the Home Position is found, it always lose counts. For example, I put in 10000 in Target Position with the "Relative Position" mode, after the movement is co
    mplete, the "Position" in "Current Trajectory Data" shows "9995" (always some counts less than or 10000) instead of 10000. The weird thing is this only happens in the first move, in the moves after that, the positon display will match the step I input.
    Any idea why this happen? I tried to disable the Position Reset in the "Find Reference Setting" and use Absolute Position Mode, it seems in either case the problem is gone.....

    I haven't heard about this issue, yet. Which NI-Motion version are you using? The latest version available for download is 6.1.3. You need to install 6.1.2 first and then the maintenance update 6.1.3.
    Download links:
    NI-Motion 6.1.2
    NI-Motion 6.1.3 maintenance update
    Please update to the latest version of NI-Motion and also update the firmware on the board in MAX. Please post a new comment to this answer if the problem persists.
    Best regards,
    Jochen Klier
    National Instruments Germany

  • Why does my 5s lose connection and require a daily reboot after charging overnight?

    Wondering if anyone knows why my 5s loses connection and requires a daily reboot after charging overnight? I have the latest IOS 8.1.

    this could have countless reasons but it might be your to far from router your router might be haveing electrical problems or your ipod is trying to join to many networks

  • T60 - WLAN regularly loses connection to access point

    Hi,
    my T60, Windows Vista with
    ThinkPad 802.11a/b/g/n, 802.11b/g/n Wireless LAN Mini PCI Express Adapter
    WLAN driver version 05 Nov 2007, v7.3.1.127
    WPA authentification
    regularly (i.e. once every 15 min) loses the connection to the access point for some seconds.
    I already tried different access points, different encryption, different WLAN channels, but nothing helped.
    So the cause seems to be the WLAN adapter of my T60 or the driver.
    I am using the latest driver. As far as I remember, I did not experience this issue on Windows XP.
    Does anyone have an idea how to solve this problem? It's quite annoying.
    Thanks! Best regards,
    Daniel

    Hi lwoxen,We apologize about the inconveniences, but I would be glad to assist. One thing worth trying is changing the wireless channel on the Cisco WAP.To do this, just login to your U-verse gateway by going to http://192.168.1.254. From there you should see a list of all the devices connected, and you just want to choose the details on the Cisco AP. It should give you an IP Address. From there, type that IP address into your browser. It should ask you for a user name and password:User: ATTadminPass: 401!VENFrom there go to the wireless options and change the Control Channel option to one of the 4 channels. I would suggest trying 36.Let us know if that works. Also, I will be sending you a private message, so if you do have any further problems, you have a direct point of contact.

  • Why do Apple photos lose quality when imported to Windows?

    When photos taken on an Apple phone are imported to Windows Photoshop Elements 11, the photos seriously lose quality.  Why?

    A bitmap image (such as a .jpg or .gif) is basically a grid of colors, which are represented by the values (numbers) for how much red, green, and blue of each pixel in the grid to activate when the image is displayed on a monitor or printed.
    Some bitmap images (including .jpgs) can also specify a color profile. Applications that support color profiles will adjust the color values before they are displayed. Photoshop honors color profiles, Fireworks does not. Fireworks does not, because most browsers do not; Fireworks displays images as they will be seen on the Web. Photoshop does, because Photoshop can support color profiles for print devices.
    Photoshop has a default color profile. If you open an image that does not have a color profile in Photoshop, Photoshop will apply its default color profile to the image and adjust the color values it displays. Photoshop shows you modified data; Fireworks shows you the raw data. This is not a quality issue, because nothing has changed with your image and the applications are operating exactly as they are supposed to.
    What you want, I think, is to be able to open your image in Photoshop, and then save the richer view of the colors you see, but without a color profile.
    Read this article: http://www.viget.com/inspire/save-for-web-simply
    You can find out more about this whole issue if you query your favorite search engine for the phrase "photoshop save for web color shift" (without the quotes).

  • SSL Replication - why supplier using regular port?

    My consumer is using the default SSL port 636, but the supplier port is
    fixed with 390. I am using regular port 390. Is that mean referrals are
    made over non-SSL(regular) port, and only replications done over SSL? I
    would like all communications between the consumer and the supplier to be
    over SSL.
    There is an optional item under "Replica Settings" where I could specify
    URLs for write operations for referral, but it would not accept
    ldaps://myhost:636. It would take ldap://myhost:636. The iPlanet doc said
    that if I specify ldaps:// then referrals would be done over SSL not over
    regular port. What am I doing wrong?
    Also, the iPlanet doc said I must not use the same port number for regular
    and SSL. But did not explain why. We are thinking of using only SSL port.
    So the question came up - so why not just disable the regular port?
    Thanks in advance,
    Choi

    Hallo Armin,
    Please check the ownership of the files in your /opt/iplanet/servers/alias
    directory. All files should be owned by the user under slapd is running.
    I hope this helps.
    Bertold
    "Armin Wenz" <[email protected]> wrote in message
    news:[email protected]..
    Hallo all
    We are using iDS 5.0 on a Solaris. When I want to try a replication over
    SSL I got the following error from my supplier server:
    NSMMReplicationPlugin - Connection Init Failed. Can not establish secure
    replication to consumer leela:13636
    - SSL alert:
    ldapssl_clientauth_init(/opt/iplanet/servers/alias/slapd-replica-supplier-ce
    rt7.db)
    failed -8174 (error -8174 - security library: bad database.)
    What does this mean: bad database? Is the database corrupt or are there
    any entries missing?
    Both Servers (supplier and consumer) are running with SSL enabled and I
    can connect to both via ldaps. Replication over an unencrypted line is
    working as well.

  • Why does the 3GS lose 3G connection all the time?

    My 3GS drives me insane and I'm strongly considering going back to BlackBerry when my upgrade is due in November because I NEVER had this issue with those phones but the issue occurs on my 3GS, it happens with my friend's iPhone 4 and I therefore doubt the issue will be resolved in the next iPhone.
    Whenever I lose mysignal, ie. going into a lift, the signal returns afterwards but the 3G connection NEVER returns automatically unless I turn on Airplane mode and then turn it back off again. When I do this, 3G returns on an almost full signal so I know that the area I'm in has a strong enough signal.
    This is unacceptable for a phone that is supposed to do pretty much everything! And getting a 3G signal back after a drop in signal really doesn't seem too much to ask since all other phones seem to handle it perfectly well. I've also noticed that iPhones tend to display 'searching' for absolutely ages after coming out of an area with no signal, whereas everyone else regains their signal long before I do!
    This is very frustrating, I feel like I am babysitting this hunk of junk and I've reached the end of my tether. Do iPhones have an issue in general with signal and maintaining a decent signal? If so, I'm getting shot of this thing and getting a phone that actually functions how it should.
    And yes I've switched on and off, yes my phone regularly runs completely flat, yes I've taken the SIM out and put back in and yes I've even tried a completely brand new SIM.

    Hi
    Are you in the UK ?
    I have the exact same problem on O2 - using an iphone 3gs 4.3.5
    Now, I think it is to do with a software update... My cousin has a 4 on 4.3.1 or .2 and hers doesn't do it but another friend has a 4 on 4.3.5 and hers does the same as mine.
    It drives me mad. I come home and have good 3g but then it goes and I have to go into airplane mode and back to re-connect to 3g and then when I do there is like 3 - 4 bars of 3g there,
    I wish Apple would sort it out!!!

Maybe you are looking for