Why do I see in the preview panel black edge on sides of imported jpegs into premiere CS5

We sized a jpeg in photoshop to 720 x 524 to import into premiere project frame size 720 x 480. Proportions all look good, but there is a black edge on each side of the jpeg in the preview panel. Will this show up when viewed on a tv screen once we create the dvd? On my preview tv screen, it looks like it will not show up, but I do not want to do this whole project that includes 50 jpegs and then have a problem? any good answers or things I should change.
Thank you

> I would have thought 540 myself to get a square pixel equivalent of 4:3 aspect ratio using 720 horizontal lines.
720x540 was the square-pixel equivalent before the correction that considers the difference between clean aperture and production aperture. In CS4 and later, it's 720x534.
There's a table of the square-pixel equivalents here. There are also presets in Photoshop that match this.

Similar Messages

Why are clipping adjustments in the basic panel not being saved, updated or shown in the histogram? I am using LR 5.7 on a MAC OSX 10.8 etc.

Why are clipping adjustments in the basic panel not being saved, updated or shown in the histogram? I am using LR 5.7 on a MAC OSX 10.8 etc.

Here is more information and hopefully a better explanation. My version of
LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits
done in the basic module. That means that I can correct exposure,
highlights, shadows etc. but once I go to another picture and returned to
the edited one the histogram (on the edited photo) and specifically the
clipping triangles are white or some other color. This is normally suppose
to indicate that some channel or all channels are clipped in the
highlight/shadow areas. If I adjust any slider in the Basic panel even as
little as one +/- value or press the J-key, the histogram will now show the
original edit. Moving on to another photo and then returning to to
previously edited one and again the edits are "not saved" and I have to hit
the J-key or adjust a slider to see the previously edited information
reflected in the histogram.
This is especially frustrating for fours reasons. If I have edited a shoot
and return to it I cannot see from the clipping information whether the
original edit was correct and of course I might re-edit it (to some now
incorrect value). This brings up the second issue synchronization. I can't
rely on it because if I go back to fine tune a specific image in the batch
the triangles are white or some other color for that and every image. I have
to hit the J-key to show/hide clipping or the back slash key to see
before/after previews. This is the third issue which is very time consuming
and inefficient regarding my workflow. The forth issue is that I have
noticed that normally when an image is saved in PS, LR adds a copy of the
saved version to its catalogue. I have noticed that the PS to LR saves are
all wrong in terms of exposure (they are much lighter in tone) than the
original LR edit and the PS edit on my screen. If I check the PS to LR photo
in LR I notice that the Basic panel values have been changed and that I have
to sync the image with the originally edited RAW/NEF LR file to get it to
look the same.
Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge
monitor to view my NEF files. I have reverted back to using LR 4 however I
am not sure if I should expect compatibility problems with Camera Raw 7.4 in
LR 4 vs. Camera Raw 8.6 in LR 5.
Note 2.) I am going to do an import converting everything to .dng to see if
this is a work around.
Note 3). I would be interested in knowing if this issue is related to the PS
RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X
10.10.1
Hopefully someone else has noticed this problem. Any shared information
would be valuable. Thanks for the reply.

Where has the preview panel gone is Bridge CS5?

Today when I opened up Bridge, the preview panel on the right hand side has disappeared. It shows as being selected when I go to the Window Menu but it isn't there. The scroll bar is also missing so I can't view all of the thumbnails. Does anyone have any ideas about why this has happened and how I can return it to it's normal format? Thanks, Michelle.

Fantastic. Thank you, much appreciated
Date: Mon, 16 May 2011 02:22:18 -0600
From: [email protected]
To: [email protected]
Subject: Where has the preview panel gone is Bridge CS5?
No, but you can choose Reset Workspace from the workspace menu to get it back to normal.
>

How do I hide the "preview panel" in Mail. Double clicking the "separator bar" hasn't worked ( I think I know where that bar is.)

How can I hide the "preview panel" in Mail? Double clicking on the "separator bar" , as directed by Mail Help, does nothing. ( I am not certain where that bar is, but believe it to be the zone where the preview panel and the message space meet.) This issue only arose after I upgraded to Mavericks.

Maggie 6 wrote:
How can I hide the "preview panel" in Mail? Double clicking on the "separator bar" , as directed by Mail Help, does nothing. ( I am not certain where that bar is, but believe it to be the zone where the preview panel and the message space meet.) This issue only arose after I upgraded to Mavericks.
The only way I found to hide the "preview panel" is to drag the separator to the edge of the window. It shrinks the panel down to perhaps 1/2 inch in height and then disappears only when you drag it to the bottom (classic layout) or perhaps a couple inches wide (in the new layout). It is also annoying to me that you can double click to open the preview panel but you cannot repeat that to hide it. [sigh]
I submitted feedback about the help file as well - you may want to do the same. I could not find the double click mentioned in the new "Mail Help" - I know it was in the old version.

We are trying to close caption our telecasts. We get the captioning files done out of house, pull them back into Premiere, and then embed them. The TV station requires .mxf files with the file embedded as a 708 stream, to play on their Grass Valley K2 vid

We are trying to close caption our telecasts. We get the captioning files done out of house, pull them back into Premiere, and then embed them. The TV station requires .mxf files with the file embedded as a 708 stream, to play on their Grass Valley K2 video servers. We have tried multiple scenarios and cannot get the captions to display.
Whenever I export, it becomes a 608 stream, and will not play on their servers.

Hello there,
I'm sorry to hear you are having a problem. Thank you for taking the time to post here.
Here are some questions:
1. What version of PPRO are you using? MAC or WIN?
2. Is the caption data you are embedding a 708 caption stream?
3. When you re-import the MXF with captioning embedded back into PPRO, does it show 708 closed captions in PPRO?
PPRO will embed 708 caption streams to MXF -- I just did this, re-imported the embedded MXF to PPRO, and I see the captions in the MXF.
If you could share one of your files with me, I could take a look.
Take care and thanks again,
CM

I am getting the following error message when I try to import photos into iPhoto from my camera: "/private/var/folders/GB/GBl4wh8-ELqUVMI5dO-ryU TI/-Tmp-/iPhoto/DSCF2033.JPG". Have already tried removing and reinstalling iPhoto to no avail.

I am getting the following error message when I try to import photos into iPhoto from my camera: "/private/var/folders/GB/GBl4wh8-ELqUVMI5dO-ryU TI/-Tmp-/iPhoto/DSCF2033.JPG". Have already tried removing and reinstalling iPhoto to no avail.

Does this happen if you try to Import to Library within iPhoto, or is it when you connect your camera (and which is set to automatically use iPhoto) that this error message occurs?
If you open Image Capture > Preferences is iPhoto selected as the choice when a camera is connected?

I have moved my iPhoto to an external hard drive. so now I have to have the external hard drive connected to my laptop to view the photos. Now when I want to import photos into iPhoto from my media card, I don't have room to connect both devices.

I have moved my iPhoto to an external hard drive. so now I have to have the external hard drive connected to my laptop to view the photos. Now when I want to import photos into iPhoto from my media card, I don't have room to connect both devices at the same time as the usb ports are side by side. How do I import my photos from the media card to the external hard drive now?

First transfer the photos to a folder on your MacBook using Image Capture in your Utilities folder. Then move them to iPhoto.
BTW, you might want to invest in a cheap USB hub.

I can't see anything in the Preview Panel in Bridge

Cannot see any files, file names, icons, or anything in my preview panel. I've tried to purge the cache and I've uninstalled and reinstalled. I cannot figure this one out. I use Mac OSX 10.9.2

Have you reset preferences? Hold down option key and start Bridge. Will get a reset window.

What's up with the Preview panel.

This is the way my screen looks:
and here's the way that I think it should look based on wha i've seen.
Is there some way to able to switch between artboards in bridge?

You are just not getting the concept of Bridge.
Forget "artboards" – it's a false analogy. What you are seeing in the second example is an enlarged Preview panel in the centre and a Content panel on the right. This shows the contents of the active drive as thumbnails. You select what appears in the preview by clicking on the appropriate thumbnail. The preview can be zoomed and the thumbnails can be sized to taste with the slider at the bottom.
You can learn more here: http://tv.adobe.com/watch/learn-bridge-cs4/introducing-bridge-cs4/
... and here: http://tv.adobe.com/watch/the-complete-picture-with-julieanne-kost/episode-7/

Previewing mp3's in the preview panel only works for the first 3 seconds

When i click on an mp3 to preview in the panel it only plays the first few seconds or so. How can I fix this?

My appologies. I have a Win 7 PC. Adobe Bridge CC . Yes all the files work on other players. And bridge will actually play wav and af files fine, but it wont play mp3's past a few seconds. It says it's playing in the preview pannel but the audio cuts out.

Why can't I lock the control panel on M602's via webjetadmin 10.1?

1. Product Name and Number
HPM602
HP webjetadmin 10.1
Hi,
we administer a fleet onf HP printers mainly 4015s and 4250s, we are able toautomate lockin of these devices through the control panel on these using webjetadmin 10.1 however since we have put our fleet of M602's in we are unable to lock these via Jetadmin, we can via the web interface but we automate it 4 times a day in case students do a cold reset and attempt to print via IP.
Obviously that is a problem.
Any help appreciated.
Pete
This question was solved.
View Solution.

HI Pete,
Your query is probably better suited to the HP Enterprise Community forum.
The M602 is not a consumer device. IT is marketed as a solution for medium to large workgroups..
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Why can't I get the Preview application to open PDF files?

Since the end of April 2014, I have had problems with the Preview application. When I try to open Preview, I get the following message: "This application 'Preview.app can't be opened." "-1712.". I tried a recommended solution that I found in the Apple Support Communities, which said I could go to Finder > press the Option key to show Library and then go Preferences and then search for the Preview plist file and delete it.
Unfortunately, that did not work.
Two other Apple owners had the same problem and said the above procedure had worked for them, but post were back in the year 2012. When I followed the above procedures, it did not make any change in the problem with Preview. I still cannot open it. Does any one out there have an suggestions?
It is possible that any recent updates for MacBook Pro from Apple caused the problem? Will I forever have to resort to using Adobe's PDF program?

Hi aK'
Nice, memorable user name!
-1712 is a timed out error. One reported cause (with other applications) is that the application is attempting to open a large number of files, or a file that no longer exists.
Try holding down the shift key when launching preview. This prevents the application from attempting to open windows that were not closed before quitting the application.
Regards,
Barry

Why Can't I open the layer panel?

I installed the new trial version of PSE11 and for some reason the layer panel does not show up automatically and when I try to open it under the windows menu the layers part is greyed out. The entire layers dropdown menu is also entirely grey. Please help!

You need to be in Expert mode. Just click the expert button at the top of the window, and you'll not only be able to use the menu command, but will have a dedicated layers panel button at the bottom right of the main PSE window.

HT204093 I am trying to turn off the preview panel. Any ideas how to do that?

How do I turn off mail preview?

Hey DogJoey,
You can adjust the preview window or completely hide it by dragging the separator all the way to the right. For more information take a look at the article below. It will be for OS X Yosemite, but will be the same for OS X Mavericks.
Read messages
https://help.apple.com/mail/mac/10.10/index.html?localePath=en.lproj#/mlhl7fa3a9 0d
Take care,
-Norm G.

Why can't I use the fade to black and white option in iMovie '11?

I have a project that uses a few photos with one minute duration timers I want to slowly fade from color to black and white but the fade to options are all greyed out... Am I over looking something or doing something wrong?

Exiled Angel wrote:
....it's the color in the pictures I want to gradually reduce the saturation on until they are black and white before the transitions start, not fade in or out to a black or white screen like you are suggesting.
Sorry, but I wasn't suggesting that you use Fade to Black or Fade to White, just explaining what they do, given that you used the term "fade" in your first post. I assumed you may have been using the Fade to Black transition (which won't achieve what you want).
I suggested that you use Cross Dissolve, but I need to explain further how to achieve the effect you are looking for. First, you need to place a copy of the photo directly after the original. Make sure Ken Burns is turned off - use Fit. Now double-click on the copy to bring up the Clip Inspector. Click on Effects and select Black & White, then click Done. Drag a Cross Dissolve transition between the 2 clips (photos) and adjust the duration to your liking in the Inspector. Now you will see the effect your are looking for.
The key is to have an exact copy of the photo following the original, then change the copy to Black and White (or Sepia or any other effect), then insert the Cross Dissolve (or Cross Blur etc.) transition.
Hope that''s what you are looking for!
John

Why do I see in the preview panel black edge on sides of imported jpegs into premiere CS5

Similar Messages

Maybe you are looking for