Why do I skip a chapter on my DVD

I am using Encore 2.o on a Pentium 4 laptop. The video is about 60 mins long. When I play it in Encore it works fine. Going from a still to video clip to a still and on. Once I burn it to DVD, it freezes on the still then when you hit play it skips over the video clip to the still that follows the clip. Yet if I go to a submenu and call for the video clip it plays fine on the DVD.
I imagine I accidently set something wrong, but I don't know what. I need to get this project out to the customer, but not like this. I have burned it to different disks thinking that something went wrong with the writing. But it always freezes in the same place, any suggestions.

Are the stills part of the same file as the video, or are they separate files that were added to the same Encore timeline?

Similar Messages

  • Why does airplay skip

    why does airtunes skip over airplay with my apple tv 2?

    Have you cleared your browser cache and Flash Player cache?
    Firefox (History>Clear Recent History):
    FlashPlayer (Global Settings Manager - right click any Flash content):

  • Why did they skip the "save as" command in the last version of Keynote? how do I rename an existing keynote presentation quickly?

    Why did they skip the "save as" command in the last version of Keynote? How do I rename an existing keynote presentation quickly without the "Save As" command??

    Why did they skip the "save as" command in the last version of Keynote? How do I rename an existing keynote presentation quickly without the "Save As" command??

  • The difference between chapter markers and dvd studio pro markers

    Does anyone know what is the difference between chapter markers and dvd studio pro markers? I can not find anywhere on Google. Also in the tutorials I have seen, suggesting DVD Studio Pro markers, but it did not mention the chapter markers.
    Thanks,

    "Adding Chapter and Compression Markers to Your Sequence
    Once you have your edited sequence or program finished, you can add markers to the sequence for use on DVD. Markers are reference points you can place within clips or sequences that identify specific frames. There are two kinds of markers you can add that directly relate to authoring a DVD—chapter markers and compression markers.
    • Chapter markers allow DVD authoring applications to create a navigable chapter list for your exported QuickTime movie. Chapter markers force MPEG keyframes (known as I-frames) at their location, since the DVD specification requires an I-frame at each chapter point.
    • Compression markers identify areas of abrupt change and include two types: those that are automatically inserted by Final Cut Pro at all edit points, and those you manually place in the clip or sequence. Like chapter markers, compression markers force I-frames at their location, although in this case it is for better quality encoding, and they are not used to create a chapter list.
    Note: When you export a QuickTime movie, you have an option to export various kinds of markers, including compression, chapter, or DVD Studio Pro markers. *When you choose to export DVD Studio Pro markers, Final Cut Pro actually exports chapter markers and all compression markers.* This includes compression markers you set manually, as well as ones created automatically by Final Cut Pro at edit and transition points."
    From the Final Cut Pro User Manual.
    So, JS was right the first time

  • Why are the photos I copied onto a DVD from I-Photo not viewable by a Windows PC?

    Why are the photos I copied onto a DVD from iPhoto not viewable on a Windows PC?

    Because you did it wrong? It's hard to know unless you tell us what you did.
    What should work:
    Select the photos you want to share
    File -> Export and export them to a folder on the desktop. Burn that to the disk with the Finder.
    This User Tip
    https://discussions.apple.com/docs/DOC-4921
    has details of the options in the Export dialogue.

  • When I put a cd in the computer, itunes open and I can put the music on my ipod.  why wont itunes open when i put a dvd in my computer so i can put it on my ipod, too?

    When I put acd in the computer, itunes opens and I can transfer music to my ipod.
    Why wont itunes open when I put a dvd in the computer?  It opens in windows media player.  I want to transfer a dvd to my ipod.

    Have you tried to click on "repair" and then try to uninstall the component?

  • I bought 3 films and none of them had subtitles or alternative languages: why? I paid full price (like a dvd) without the same options. Why should I pay the same price? What I want is to change languages or to have subtitles (Kung Fu Panda2 and Rise..apes

    I bought 3 films and none of them had subtitles or alternative languages: why? I paid full price (like a dvd) without the same options. Why should I pay the same price? What I want is to change languages or to have subtitles (Kung Fu Panda2 and Rise of the Planet of the Apes and SpongeBob).
    Pease tell me.
    Best Regards

    You can't change languages in any of the movies offered in the store. Some movies have subtitles but it is in the same language as the movie.
    Depending on what country you are in, you may get movies in that countries native language.

  • I have purchased Adobe premiere element 12. Why can't I burn a CD or DVD? Do I need an additional program?

    I have purchased Adobe premiere element 12. Why can't I burn a CD or DVD? Do I need an additional program?

    See here:
    Adobe Premiere Elements Help | Sharing to DVD or Blu-ray Disc

  • Why I dont have the OS X instead DVD with my MacBook pro?

    Why I dont have the OS X instead DVD with my MacBook pro?

    If you were running 10.7 or later, and had a normal install, there are two ways to get there
    Command-R at Startup is the usual method.
    Option key at Startup draws a gray screen and puts up an Icon for each Bootable Volume. Among them should be Recovery_HD. Choose that and proceed.
    The Recovery_HD partition is treated as a special case, and is NOT shown by default in Disk Utility. There are parameters you can change to get Disk Utility to show all partitions.

  • How do I prohibit skipping a chapter in Encore CS6?

    Background: I'm used to authoring in Scenarist, so I am used to certain functions, like NOPS.
    What I am working on is a concert DVD. My usual flow is PG entry goes to an FBI copyright warning. This is NOP'ed for a 10 second display. The NOP prevents the user from skipping or fast forwarding. This links to our company logo animation, which is also NOP'ed. Then the Title Menu appears, which links to several things like previews and a quick system calibration video. The last link goes to the Root Menu.
    Now, I'm trying to set the NOP in the Flowchart. The Operations: All permitted... Set.. is where I think this is done in Encore, but when I press the Set button, nothing happens--no menu of options on how I want this object to be treated when it executes appears. Bug? Or did I skip some prerequisite step earlier in the process?
    I'm trying to see if I can achieve a faster workflow in Encore, being it's integrated with the rest of the Adobe suite and Scenarist is not.

    Thank you. That seems to work. I just set "none permitted" for the FBI screen. I'll need to confirm that it worked by actually burning the disc and trying it in a player, but I see no reason why it shouldn't.

  • Why does LabVIEW skip over commands in programming structures

    Hello everyone!
    Is there a certain way you program to make labview execute ALL commands within a loop before going into another loop? For example, I have a while loop that stops if either the stop button is pushed or if the set point input is greater than 8. If both of these are false, then the code entered a case structure where it controls the output from a plant model. However, labview will enter the case structure without checking if both conditions are met. I've attached the VI and in the next message will post the VIs from the plant. I want it to do the below code,
    IF (Set Point > 8 OR Set Point < 0) THEN
           SET_Point OK= False
    ELSe
          SET_Point OK = True
    END IF
    IF (SET_Point OK = FALSE OR Stop Button pushed) THEN
             ! STOP VI
    ELSE
             ! Enter PID Control Loop
    END IF
    But labview likes to just jump around and skip parts for some reason. So when it for example, skips the OR check it uses the default value of true for the next case structure. It's driving me crazy. Can anyone please tell me why its doing this??
    Thanks.
    Solved!
    Go to Solution.
    Attachments:
    General Auto PID Simulator.vi ‏83 KB
    Global 1.vi ‏5 KB

    Ah! I can't believe I made that dumb of a mistake. And thanks for the advice altenbach. My overcomplicated diagram probably lead me to making that error. 
    I have another question though. How come when I use the Write to measurement file VI it will start the process variable at like 40 inches but when I don't use it, it'll start it at 0 and do as its supposed to? I've attached my updated VI with the write to measurement file VI in it. You'll see that if you delete it then it'll do as its supposed to. I don't understand why though..
    Attachments:
    General Auto PID Simulator.vi ‏118 KB
    Global 1.vi ‏5 KB
    problem with PV initialization.JPG ‏132 KB

  • Why are Videos skipping?

    The movies i have in itunes skip. They play sort of choppy. They are mostly just little clips of tv shows and such, nothing too intense. I highly doubt this is my hardwares problem as my computer is pretty brand spanking new and powerful. Why is this happening? itunes bug? Anyone else having this? thanks.

    Run Activitiy Monitor in Applications / Utilities and sort CPU% in descending order. Is anything taking a lot of CPU time? Do the same for disk activity. Are you running any antivirus programs or something like MacKeeper?

  • Why can I only change chapter and Audio, but not subtitles?

    I have a little problem, and I don't understand WHY it should be a problem.
    I have started ripped all my movies into a local computer for home sharring. We have some Apple TVs in the house and everything works well for ripping and watching movies.
    All our movies has been ripped in HandBrake and thereafter metatagged in MetaX. In Handbrake I choose the standard A TV 2, which languages I want and which subtitles I want.. The funny part is, that When I try to watch the movie in either iTunes or Apple TV, it is only possible for me to select chapter and Audio. I am sure I am not the first one to experience this, so if somebody could tell me if I do anything wrong? Or is it just iTunes and Apple TV that won't let you change more that 2 different data?
    i have tried to rip a movie without any chapters (a very short movie) and then it was possible for me to change the subtitles, but nothing else.. I donøt understand it and it is very confusing.. :/ Please help somebody.. Just tell me if it is my fault or it is Apple's fault..

    Sorry we cannot help you circumvent copy protection, such discussion is prohibited in these communities.

  • Why does iPhone skips contacts when syncing?

    Why is that when I sync iPhone with my MacBook, then it syncs good but skips contacts. I added alot of contacts on iPhone and now they don't get carried over to my Mac. What can I do? What's the problem?

    in that case itune swould need to be totally uninstalled and reinstalled
    you will need to uninstall 6 items
    depending on if you have a windows xp HT1925, or a newer version of windows HT1923 (type that in the  search with support clicked) ,
    this will guide you on what you need to do.
    if it is a mac, redownload itunes from our website.

  • Why is itunes skipping like a CD since Downloading Version 12

    I have never had this problem with any prior release of itunes. I downloaded the new 12 version yesterday 10/20/14 and immediately had issues with all music skipping like a scratched CD. This includes music from my library as well as itunes Radio stations (All but NPR for some reason??). I checked my background programs, CPU usage, etc and there is nothing out of the ordinary or excessive hampering performance. Has anyone else had this issue? I have seen this question asked several times and no valid answers posted to date. Please help!
    Windows 7 / iTunes 12.0.1.26

    Hello again, Crystal.
    Thanks for the update on your issue. Due to the nature of your issue you may find more information by using another one of Apple's support resources - https://getsupport.apple.com/GetproductgroupList.action to get a more hands-on response.
    Cheers,
    Pedro.

Maybe you are looking for

  • How do I find all messages sent by a particular sender

    How do I find all messages sent by a particular sender

  • Variant pricing in Sales order and Purchase Order for same Config material.

    Hi, I am stuck to a point wherein the varaint pricing is working either in Saler Order or in Purchase Order. The issue is that the Variant Condition Characteristics 'VARCONDMM' has MMCOM and VKOND in additional tab and in the multiple selection activ

  • Saving takes a very long time!!!  -- PLEASE HELP

    I just bought KN 09 and very happy with it. But I have a presentation prepared in 08 that has several large Quicktime files in them. Every time I make little changes in 09, it takes a LONG time to save it -- like 6 minutes. What's the problem? I save

  • AFAB AF

    Hi!! When I run the transaction AFAB, there is a error message in one asset. But the amount is cero, beacuse the asset completly depreciated. Message no. KI235 Account 68170002 requires an assignment to a CO object In the depreciated planned: 10GREEN

  • Signature not showing up

    have it selected [i think][ in preferences, but when i do a new message, there's no sig, anfd the "select sig" window only shows "none". any help? thanx!