Why do I sometimes get connected to different web site than link specified and if I go BACK and try again, it works correctly?

This happens infrequently, but sometimes I get connected to a web site that has a Trojan. If I go back and try it again, I get the correct site. I know this happens from the Yahoo site, but it also happens from other sites.

Incorrectly configured server. i.e. missing intermediate chain certificate. IE can download automatically, but Mozilla can't, hence the cert error. As far as why it randomly decides it is valid sometimes prior to you try to add a security exception I don't know.
http://www.sslshopper.com/ssl-certificate-not-trusted-error.html

Similar Messages

TS2551 When I open iphoto says I have 4500 pics I haven 't downloaded that many. When I looked I have pic of ebay home page facebook a lot of different web sites I've visited How do I stop this and why is this happening.

When I open iphoto says I have 4500 pics I haven 't downloaded that many. When I looked I have pic of ebay home page facebook a lot of different web sites I've visited How do I stop this and why is this happening.

This happens when someone drags the HD or a system folder icon to the iPhoto Window by accident. Solution: restore from back up created before this occurred.
Regards
TD

Firefox much slower connecting to all web sites than Internet Explorer. Why?

Over the last few weeks, Firefox has become much slower connecting to virtually all web sites that I frequent than does Internet Explorer. Nothing has changed on my computer other than occasional downloads of Firefox "improvements".

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Why can't I get my mail, I get a message "connection to server failed" but I can get on all other web sites. It worked fine until about a month ago.

WHY CAN'T I GET MY MAIL, I GET A MESSAGE 'CONNECTION TO SERVER FAILED" BUT I CAN GET ON ALL OTHER WEB SITES. IT WORKED FINE UNTIL ABOUT A MONTH AGO. I CANCELLED MY ACCOUNT, PUT MY INFO IN AGAIN AND STILL GET THE MESSAGE "CONNECTION TO SERVER FAILED" HELP PLEASE!

have you tried removing and readding the e-mail account? sometimes settings get corrupted or changed on the server end...something computers can sometimes handle better than the mail interface.

HT3049 Why do I keep getting "Connection failed: NT_STATUS_BAD_NETWORK_NAME" when trying to print on Windows networked printer over wi-fi?

Why do I keep getting "Connection failed: NT_STATUS_BAD_NETWORK_NAME" when trying to print on Windows networked printer over wi-fi?

If I run the following (on the machine I'm trying to set up the share)
smbclient -L localhost -U%
I got the following output
Connection to localhost failed (Error NT_STATUS_CONNECTION_REFUSED)
so I thought it might be something incorrect with the iptables side of things, however I haven't really touched that at all and it seems to look correct
iptables -nvL
Chain INPUT (policy ACCEPT 667 packets, 79977 bytes)
pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 157 packets, 20724 bytes)
pkts bytes target prot opt in out source destination
So from my (very little) knowledge this appears correct (I think)... However it appears that something is blocking access somewhere.

When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this

When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this problem previous and was able to fix by doing a complete wipe of my computer and reinstalling CC. However, I should not have to wipe my computer clean everytime I need to do a CC update. HELP!

Hi,
Please download the updates directly from the link below:
WIN: All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
MAC: All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
Regards,
Sheena

Why did apple mail get much worse with lion osx? I can't add recipients without copy and paste?

why did apple mail get much worse with lion osx? I can't add recipients without copy and paste?

I went through updates on my three newest Macs this week. As I stated I'm talking about iTunes 10.5.1 (42). I am checking for updates now and I see 10.5.2 is now available. I'll know in about 15 minutes if this issue is fixed or not.
15 minutes later:
I must have updated this PPC G5 a day or two before iTunes 10.5.2 came out. I was able to update to 10.5.2 (11) and this copy/paste bug is fixed. I'm happy again.
Tracy

Why can't i get sound from some of my movies when i'm watching it on my macbook pro, but it works on my iMac?

why can't i get sound from some of my movies when i'm watching it on my macbook pro, but it works on my iMac?

I need the exact model number, not just the series.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

When I start a new tab yahoo search comes and I don't want that. how do I get a different web site to open?

when I start a new tab yahoo search comes when I start a new tab yahoo search comes and I don't want that. how do I get a different web site to open?

You need to figure out what you have installed which changed that action to Yahoo from a blank tab, which is the default action in Firefox; and then get rid of that add-on. Then you can can install an add-on which allows you to select what you want in the new tab.
https://addons.mozilla.org/en-US/firefox/addon/newtaburl/

My wife and I share our Mac OS 10.6.8 since downloading Skype on her account she can not stay connected to any web site she pulls up. I removed Skype from here account but it stll happens. What can I do to clear this up?

My wife and I share the same Mac OS 10.6.8 and since downloading Skype on her accout she came not asty connected to any web site for more than a few seconds. I have remove Skype from her account but not mine. I don't have the problem on my accout and I still have Skype loaded. How can I fix this problem?

O.k. Thanks for the clarification. I poked around in my TimeCapsule router's settings (TimeCapsule is an Apple Airport Extreme router with attached hard drive for wireless backup/storage). Unfortunately, it doesn't look like I can disable multicasting with the TimeCapsule. I can change the multicasting 'rate'. Settings are Low, Medium, High. It's currently set to Low.
I did a few web searches, and found an Apple.com article: <http://support.apple.com/kb/HT3789?viewlocale=en_US> which explained how to disable Bonjour Service Advertisements. I believe this is the same thing as 'Multicasting'. The process is a modification of "/System/Library/LaunchDaemons/com.apple.mDNSResponder.plist", and a restart of the Mac is required afterwards.
I'm a bit concerned that disabling multicasting will interfere with my AppleTVs and iTunes music sharing, but I may try it next time I'm up for a computer workout. This task will require editing of system preference files, could require multiple restarts, might interfere with my AppleTVs, could interfere with my iTunes file sharing, doesn't have a documented relationship to my problem.
This is way to difficult for something that should just work. Did you say you had read something about a relationship between this bonjour multicasting and smb connectivity? If it was online could you post the link?
I'm currently able to connect to the drive using NFS, but I have to manually configure that connection each time I reboot (can't get the 'Disk Utility' configured to do it automatically). While it's working with NFS, it's not my preferred connect method (for various reasons).

I can't connect to a web site via the site's own WiFi.

This is a strange one. When I'm in the New York Public Library and connected to the internet via their WiFi I can connect to any web site EXCEPT the New York Public Library's! (www.nypl.org) It tries connecting then times out every time. I can connect to the NYPL's site when I'm not there from home or other WiFis public or private, and when there I can connect to it on my iPhone, but not from my computer with either Firefox or Safari. Other people with Macs can access the site from there and I went over my settings with one of them but could find no differences.
I'm using 10.5.7 and have the latest updates for Firefox and Safari and the latest updates for OSX. What's frustrating is that when I'm at the library doing research there are databases one can only access from there, not from outside, so it's a very odd situation. Using iPhone for such a reason is quite impractical, too so I'd appreciate any help anyone can offer. I'm sure it's a setting somewhere in my network prefs or something but I'm baffled as to what it might be - has anyone else ever run across something similar?
Thank you!

I am hear at the New York Public Library now. I am connected to the internet on their WiFi but still cannot get to their site at the address http://www.nypl.org , it times out. I pinged them with this result:
Ping has started ...
ping: cannot resolve http://www.nypl.org: Unknown host
I tried "lookup" with the following result:
Lookup has started ...
; <<>> DiG 9.4.3-P1 <<>> http://www.nypl.org +multiline +nocomments +nocmd +noquestion +nostats +search
;; global options: printcmd
nypl.org. 182 IN SOA ns1.nypl.org. root.ns1.nypl.org. (
2002092709 ; serial
10800 ; refresh (3 hours)
3600 ; retry (1 hour)
10800 ; expire (3 hours)
10800 ; minimum (3 hours)
I have tried at other times to get to the site through links from other sites with no luck.
Thank you in advance for your time and attention.

I can delete my Internet history but I can't delete my words searched in different web sites. Would you like to help me?

I can delete my Internet history but I can't delete my words searched in different web sites. Would you like to help me?

Hi Niel,
There may be a problem with the definition of the rule to delete the characteristic. If you go to transaction RSMRT
and use the 'check' option to check the rule you created are there any errors for the check?
If not when you get the error message that you mention is there any additional error messages created in sm21
or dumps in ST22?
If not there may be a problem with the consistency of the cube if you goto RSRV>All Elementary tests>Transaction data
and run these tests for the cubes are there any error messages? If yes please try to use the repair function in RSRV
to correct any errors.
If none of the above helps you should delete the run you created, make a dummy change to the cube (e.g add a '.'
to the description of the cube, save the change and then activate the cube, please then try and create the
remodelling rule again.
Best Regards,
Des.

I get this message when I try to open my google shared docs this week: "A browser error has occurred. Please hold the Shift key and click the Refresh button to try again." - but that click/refresh doesn't work either. What's up?

# Question
I get this message when I try to open my google shared docs this week: "A browser error has occurred. Please hold the Shift key and click the Refresh button to try again." - but that click/refresh doesn't work either. What's up?

The backend end is in serious pain....on many levels.
Try this: Connection Problems Form

I get redirected to unwanted web sites during searches from the browser ONLY, never from the toolbar. Is this the same malware problem as discribed for redirects from BOTH the browser and the toolbar?

I get redirected to unwanted web sites during searches from the browser ONLY, never from the toolbar. Is this the same malware problem as discribed for redirects from BOTH the browser and the toolbar?
== This happened ==
Every time Firefox opened
== was happening with Internet Explorer, continues with Firefox

Did you do a malware check?
Do a malware check with a few malware scan programs.
You need to use all programs because each detects different malware.
Make sure that you update each program to get the latest version of the database.
http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
http://www.superantispyware.com/ - SuperAntispyware
http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]
(the MozillaZine KB is currently down, so you may need to try again later)

I am still getting redirected to various web sites when using Safari. My PC is not affected but my I phone and I pad are. I have reset my router and changed my admin name and password. I am still being redirected.

I am still getting redirected to various web sites when using Safari. My PC is not affected but my I phone and I pad are. I have reset my router and changed my admin name and password. I am still being redirected.

Chances are you mis-typed a character in the Wifi password and the devices saved that information. Now whenever you try to connect the device refers to the wrong password and the Jetpack does not accept your connection. Tell your devices to forget the wireless connection and start over.
Once you enter the proper WiFi credentials the Jetpack will allow you to connect.

Why do I sometimes get connected to different web site than link specified and if I go BACK and try again, it works correctly?

Similar Messages

Maybe you are looking for