Why do I use my ipod as a camera when I lose precious photos even when I try to back up before an update! Selling my ipod at the first chance I get

Why do I use my Ipod tiuch as a camera when lose precious photos of my granddaughter every time there is an operating system update? Even when I try to back up the ipod, I can't find the pics etc on my pc. It is very annoying and I am seriously considering selling my ipod because of this. No warning is given that photos will be lost. So very disappointed in aple, lost all my music last time, as well as my pics.

Yes, using the windows photo capture application is how you get photos taken with the iPod onto your pc. You should store them there, and organize them in folders.
Create one main photo folder. Inside that folder create additional folders to hold photos. Each folder will become an album on an iPod, iPad, or iPhone. Do not next any other folders inside the first album folder.
Then start iTunes on your pc and connect your iPod. Select your iPod in itunes and select the Photos tab that will be ps enter. You will most likely have first find your main photos folder. Ten select to sync all photos from your pc or select only those albums you want to have on your iPod. The click on Apply or Sync. That will copy the photos to your iPod.
If you should do something later to cause these albums to disappear from your iPod you can quickly copy them back by doing another sync.

Similar Messages

  • I get this error message when I try to back up my laptop:  Time machine could not complete the backup.  The backup disc image "/Volumes/Data/Lou Ann Buesing's Mac Book Pro. sparse bundle is already in use.  Anyone know how to fix it?

    I get this error message when I try to back up my laptop:
    ' Time machine could not complete the backup.  The backup disc image "/Volumes/Data/Lou Ann Buesing's Mac Book Pro. sparse bundle' is already in use. "
    Anyone know how to fix it?

    Reboot the TC.. Sometimes you need to reboot the whole network.
    This is what comes of Lion and then made worse in Mountain Lion of Apple not spending enough time to fix the bugs.
    Read C12 in pondini.
    http://pondini.org/TM/Troubleshooting.html
    C17 can be related I think.

  • Iphone 4 sync issue -  My iTunes is not able to sync the iPhone 4. I'm using windows 7 32bit. At the first step it gets stuck refelcting backing up the phone then nothing happens for ages. I'm using the latest iTUnes version, does anyone have similar prob

      My iTunes is not able to sync the iPhone 4. I'm using windows 7 32bit. At the first step it gets stuck refelcting backing up the phone then nothing happens for ages. I'm using the latest iTUnes version, does anyone have similar prob??? There are no error codes which appear and the iTUNES just gets hanged, is there a solution?

    Remove the song in question from the sync list and see if the rectifies the problem.
    If it does, then iTunes believes the song no longer exists on your drive and that will need to be corrected.

  • When i try to use my apple acocunt for the first time i get a prompt to put in my CC info but after i agree to the TOS the ipad only displays a black box no text, ive erased the ipad and still the same thing

    When i try to use my apple acocunt for the first time i get a prompt to put in my CC info but after i agree to the TOS the ipad only displays a black box no text, ive erased the ipad and still the same thing

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • When connecting my iphone 4 to itunes for the first time i get the following message "cannot connect to this device because Apple Mobile Service is not started" what does this mean and how do I solve it?

    when connecting my iphone 4 to itunes for the first time i get the following message "cannot connect to this device because Apple Mobile Service is not started" what does this mean and how do I solve it?

    I'd start with the following document with that one:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • Getting error while synchronising for the first time to get Device ID

    Hi All,
    When I am trying to synchronise for the first time to get device ID I am getting following error.
    Could any body through some light on this please.
    • Synchronization started 
    • Connection set up (without proxy) to: http://XYZ:portno/meSync/servlet/meSync?~sysid=MOB& 
    • Connection to server failed. 
    • Synchronisation problems: Transport-layer (http) sync exception raised (root cause: Exception while synchronizing (java.io.IOException: Not in GZIP format)) 
    Regards,
    Ameer Baba.

    Hi,
    please let us know what patch level your middleware is running on.
    The mobileengine.config file is placed in the MI client installation directory in subfolder settings. On PC it is in
    c:\Program files\Sap Mobile Infrastructure\settings.
    From the URL you mentioned above you are using the "old" technology. Please go the service.sap.com/instguides and follow the setup guid for the old technology.
    When you enter the URL directly into the browser you should get a LOGON popup. This shows the service is running. I would expect that you do not get this popup due to missing setup.
    If you want to use the new sync service in SICF and you have configured this. have a look into the manual. In that case you are missing some settings on the MI client. The problem is, that the old MI client uses old sync service by default.
    Regards,
    Oliver

  • TS1702 When I try to update two certain apps in the App Store, I get a message that says 'cannot connect to iTunes store'. Any idea how to get these apps to update?

    When I try to update two certain apps in the App Store, I get a message that says 'cannot connect to iTunes store'. Any idea how to get these apps to update?

    Check that the apps are still available in the store

  • With the latest upgrade to iPhoto, Keywords no longer display under the photo, even when Display Keywords is turned on. Does anyone know why?

    With the latest upgrade to iPhoto, Keywords no longer display under the photo, even when Display Keywords is turned on. Does anyone know why?

    Keywords have been moved into the Info tray at the right.  Don't know why it was changed.  You can send a request to change it back to Apple via http://www.apple.com/feedback/iphoto.html.
    OT

  • Why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end.  Constant

    why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end.  Constant rendering means its almost impossible to edit anything. Please help.

    H TheGamer
    What version of Premiere Elements and on what computer operating system is it running? It will not influence my answer but will give me information in case I need to get into version specifics to detail my answer further.
    Timeline rendering is a preview matter. It does not fix anything, but it is your window of opportunity to catch of problem sooner than latter. If the Timeline rendering indicator displays orange (11 or higher) for the line above the Timeline content, that is the project telling you that you are not getting the best possible preview of the playback of that content in the Edit area monitor. And, every time you edit a file, you have altered the file from the time before. So, if you want to see the best possible for what you now have, you Timeline render. This is particularly helpful when you are dealing with titles, effects, transitions, and non native formats. You cannot turn off the Timeline render indicator system, at least none that I have ever found nor seen reported. You can do selective Timeline rendering by having the gray tabs of the Work Area Bar span only the Timeline segment that you want Timeline rendered.
    Consequently, you either ignore the Timeline render indicator system, move on in the project, and take your chances in the outcome or you Timeline render to get your best possible preview if the Timeline render indicator is suggesting that you do so.
    I am not approving or disapproving of this project feature, just commenting on the what is.
    This is not Adobe. Rather user to user. If you want to have your voice heard at Adobe, you might consider filing an Adobe Feature Request Bug Report Form.
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    Please consider.
    ATR
    Add On...it is also possible to do Timeline rendering in a project, save close the project, and reopen it to find your previously "green" lined content now "orange", indicating unrendered. Yet the preview files generated originally by Timeline rendering are still existing in their hard drive save location. That is another story for other time.

  • I photo will not email photos even when my email address is correct and I am on line. Is there a setting a I have missed? It used to work :-)

    i photo will not email photos even when the email address is correct and I am online. I get a message that my server is maybe down but it is not. Anything to do with a setting I have missed? Thank you

    In iPhoto preferences ==> accounts delete and re-enter the information for that account
    Or better yet IMHO set Apple Mail as the e-mail client
    LN

  • Using Overdrive Media to down load a book from the library it starts ok but stops near the end of the first part I get no indication on ipod of download

    When using Overdrive Media to down load a book from the library it starts ok but stops near the end of the first part. I get no indication on the ipod of the book downloading. Is this a operating error or posable failure of the I pod.?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
    Thus, if you get it to work restore to factory settings/new iPod, not from backup                               
    You can redownload most iTunes purchases by:        
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • How can I use the NI PXI-6508 with Lab View 7? what are the first steps to get started??How can I use the channels with lab view 7????

    I have a 8 slot PXI system with 2 NI PXI 6508 and 1 DMM 4070 in it. I want to get started with programming the digital I/O cards (6508)! How can I use this cards with LabView 7?what is the best way to get started, or where can I get examples showing how to use the several channels?
    Thanks!
    Philipp

    Philipp,
    The best way to get started is to decide if you want to use traditional NI-DAQ or NI-DAQmx. Recently we released NI-DAQ 7.1 which provides NI-DAQmx support for the PXI-6508. In my opinion, NI-DAQmx is more efficient and much easier to use.
    To get started with examples, simply launch LabVIEW and go to Help>>Find Examples. Then expand Hardware Input and Output>>DAQmx and select the appropriate digital group for your application. This should help get you started.
    Please repost if you need addition assistance. Good luck with your application!

  • HT1483 how do i get photos back after a recent update on my ipod?

    I just came back from a family reunion and took SOO MANY pictures. When I came home I just decided I should update my ipod touch but I didn't realize it would restore. So without saving my pictures prior the update its all gone. I REALLY need to get those pictures back.Any help?

    On the computer go to iTunes>Preferences>Devices. Is there an iPod backup listed with a date of when you started the update? If there is then restore from that backup. But first go there and turn off autosyncing, other wise that backup might be overwritten when you connect. To turn off check the box that says prevent iPods...syncing." If not then there are likely gone unless these work:
    Recover files from iPod Touch | Restore data iPod | iPod touch undelete, unformat
    iPhone Recovery Stick - recover deleted text messages & more
    No user has posted that they work however.

  • Help! I can't delete my neighbors email from my iPhone 5 icloud account after I sold it to him after restoring it to factory settings.  Now he's on my iCloud account and it cannot be deleted.  Its impossible.  help. It seems the first one cant get delete

    Help Please, I sold my iphone 4 to my neighbor after I restored it to factory settings.  I just bought a new iphone 5 and decided to check out the icloud "stuff' so that I can use 'find my iphone' because I have 2 kids.  I went to check out my icloud on my imac and in the address bar put icloud.com then signed in, double clicked on mail went accounts then clicked on the gear in the right hand corner and there it was.  My neighbor had his email in the icloud and there absolutely was no way to delete his info off of my new phone.  I guess once the first person enters their info you absolutely cant get rid of it.  you can get rid of aliases but just not the original one. WHY!!  Is there any brilliant, wonderful,generous person out there that would know how to delete him from my account.  The genius bar said that they've never seen this before.  If someone can help I'm taking the info to the apple stores that I went to so that I can teach them how to do it.  Of course, I will tell them who showed me. I give you my word.

    As far as I know you can't delete the primary email address for an iCloud account.  It's assigned when the account is created.  But your neighbor wouldn't have been able to get into your iCloud account without your Apple ID and password.  Are you sure the account wasn't still on your phone when you gave it to him?
    You could migrate a copy of your data to a new iCloud account but I would still be concerned that someone else was using my old account, which presumably still has your data in it.
    I'm fairly certain that you're going to have to have iCloud support help you sort this one out as they may have the ability to make changes to an existing account that users can't.  Make an appointment with the genius bar at a nearby Apple store and have them take a look at it.  If necessary, they should be able to contact iCloud support for you.

  • IPhoto (9.6) No longer works after Yosemite Update! Please Help. The error message I get is below.

    Error Message:
    "Your photo library is either in use by another application or has become unreadable.
    Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup."
    I have performed the instructions above with the exception of the restoration from a backup.(Option/Command no longer yields a menu. Just the error message again).  Really hoping there is a fix outside of the restoration since I have neglected to back up for some time.
    P.S. I see that this is happening to others....I have another Mac to update to Yosemite and fear the same results.

    Every time there is an update to anything someone somewhere has an issue. That's why backing up prior to updating is so important.
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Maybe you are looking for

  • Send a meeting request to Outlook

    I currently try to send a meeting request to Outlook and the recipient can open that request and save it in his/her calendar. Unfornately, I haven't succeed. If you have the code that can perform that exact function, I have 15 Duke Dollars for you. T

  • Filtering seems to be broken in LR4b

    Steps to reproduce the problem: 1. Select a collection or folder 2. In the library module, call up the filter bar (\) 3. Select Camera as your first criteria 4. Select Lens as the second column criteria If I select "All Cameras" in the first column,

  • ERROR: Subactivity PC002_MT_RT_GEN task 000002 ended with errors

    Hi everybody, I am installing the CRM enviroment called  "CRM Initial Package for Master Data & Customizing". When I came to the part of  "Generate Conversion Objects" I get an error on the "Subactivity PC002_MT_RT_GEN" and I don't know what it means

  • How can I get Firefox 5 Mac to warn me before quitting?

    Using Firefox 4, a warning dialog was displayed before I quit the browser. This warning is essential to me since I work through a web application and risk losing work if I accidentally quit. I frequently use Cmd+W to close tabs, and Cmd+Q is an easy

  • Function calling in CO

    Hi , I have a Pl/sql function which needs to be called. I know i can call it in AM but its seeded AM so whats should i do now? where to call from ? Thanks a lot