Why do keyboard short cuts no longer work with ios6?

I use Keyboard Shortcuts very often.. Well, I did use them often with iOS5...
How is it that with iOS6, it comes with omw = on my way preprogrammed but auto correct assumes you're trying to spell "one."
This issue along with the Maps debacle is very frustrating to deal with. Is this the start of the downfall of Apple? It seems like a small detail but if a small issue like this is overlooked, what else will be forgotten about?

Further to the above point. ALL of my previously used shortcuts are no longer working.

Similar Messages

  • Why iTunes artwork screen saver no longer works with OS 10.7.2?

    Why iTunes artwork screen saver no longer works with OS 10.7.2?

    Same problem here.. Can't figure it out.. anyone?????

  • MacBook 10.5.8 keyboard short cuts don't work anymore

    My MacBook 10.5.8 key board short cuts (specifically the copy and paste) no longer work.  I already went into System Pref and restored the defaults, but that didn't work.  How can I fix this issue?

    I also tried rechecking Unicode Hex Input and the keyboard shortcuts still worked. So it looks like you need to have U.S. Extended checked to support keyboard shortcuts for things like – (mdash) and — (ndash).
    I don't think that should be necessary. Either US or US Extended should work fine on its own.
    In system prefs/language & text/input sources, check the box for Show Input Menu in Finder. That way you will know for sure what keyboard is active via the "flag" menu at the top right. Accidentally switching to Unicode Hex (which can be done via a keyboard shortcut) will disable your Option key for special characters (which is why I asked you to make sure only US was checked).

  • G550 - short cuts no longer working

    Forgive if I'm posting this in the wrong location. Please advise if I should post this elsewhere.
    I have a G550 and it's been great. But today all my shortcuts to my applications stopped working.
    2 issues/examples:
    1) If I try to launch a web browser from my taskbar shortcut, I get asked which program I'd like to use to open it. I can select the appropriate one but I can't "save" that choice. I can launch the web browser, but then it asks if i want to save the firefox.exe file. I click cancel and the browser works but I have to go through that process each time. Same thing happens with IE, and Chrome. Tried uninstalling and reinstalling. Same result.
    Same issue with other taskbar short cuts.
    2) I go to start, programs, MS office, MS Word. I get an error message that the application is missing. But I can open a previously saved Word (and other MS Office applications) file with no issue. So the application is there. Just can't navigate to it the "traditional" way.
    Any idea what's going on? My anti virus (AVG premium) is up to date and working fine. Don't suspect a virus but not sure. Extensive scans find no issues.
    Solved!
    Go to Solution.

    forgot about that. That did the trick.

  • Keyboard Short Cuts Don't Work

    Hi, since I have had Windows 7 installed, my short cut keys don't work. For example: zoom in and out with ctrl/shift/spacebar, ctrl click an object twice to select the object below it; selecting an image and ctrl/shift dragging the corner doesn't scale the image, crtl / doesn't show or hide document grid, etc.
    What can I do.
    Barb

    Hi,
    IT created a new user account, unfortunately, it didn't work.  Before changing to a new user account, the problems seem to be getting worse.  When typing characters, I got all types of short cuts, drop down menus, etc instead of words.  At one point, the arrow keys didn't work to move a object/photo.  I couldn't crop a photo, scrolling my mouse up and down only moved the page side to side. Selection tool didn't work, or selected frame underneath.  Selecting a page from a 4 page document doesn't take me to the page I selected, zooming in and zooming out works opposite each other.
    When I was given a new user account, the issues started developing within 15 - 20 minutes.
    Confused
    Barb

  • HT1454 iphone 4, composite cable no longer works with ios6 update

    I have the iphone 4, and I used an apple composite cable to watch youtube, videos, etc on my TV through an AV input. But when I upgraded from IOS 4 to IOS 6, it no longer works. Says something along the lines of "accessory not supported" or close to that. The iphone used to go into a display mode, where nothing shows on the phone's screen, and everything shows on the TV. But now it doesn't even do anything but give me an error message. Any ideas?
    In sum, it worked before, but updated, and now no longer works.

    It was the cable connector seating.
    It looked fully attached, but on removal and FIRM attachment it worked.
    If the AV iPod connector is not fully seated you get this error. The old iPod connector used a locking connection with a positive click, the AV cable uses a lockless connector that differs from the newer lockless iPhone connector. I suspect the AV cable connector was a transitional design that may have more connectivity issues.
    Message was edited by: jfaughnan

  • Since Aperture Update, certain keyboard short cuts don't work

    I have a keyboard shortcut set-up for Curves Auto RGB which was working fine until the upgrade. Now, when I hit the key combo, it seems to be applying a Quick Fix Preset. Wrong!
    I checked the assignment in my custom keyboard commands menu and it's correct. What's more, I don't have any key-combo set up for any Quick Fix Presets.
    Not sure what's going on. If I try to create a different key combo for my curves shortcut, nothing seems to work. No matter what I try, it applies a Quick Fix Preset.
    I wondered if anyone else was experiencing such a problem post-update.

    Similar bug for me. My custom shortcuts for own presets are not working anymore:
    http://discussions.apple.com/thread.jspa?threadID=2621108

  • Why does my iPod Nano no longer work with JVC TH-BC3 dock?

    I have a JVC TH-BC3 soundbar with a built-in iPod/iPhone dock.  My iPod now displays a "non-compatible" message on the screen when I when docked in the TH-BC3.  What is the problem?

    I sent the question to JVC's support desk and they sent the following reply -
    Thank you for contacting JVC Customer Care. My name is Veronica, your email care specialist. We value you as a JVC customer and appreciate the opportunity to be of assistance.
    I understand you are experiencing difficulties with your JVC TH-BC3 recognizing your iPod Nano. We do apologize for any inconvenience that this may have caused. What generation is your iPod Nano? By any chance have you recently updated the iOS? If so, it may just require a soft reset. Simply press and hold the Menu and Home button until the Apple logo appears. This will not erase any information on your iPod/iPhone, simply reboot the software. Please make sure the iPod/iPhone is not connected to the unit while performing the soft reset.
    I performed the soft reset and tried my iPod Nano in the dock and it now works!

  • InCopy Paragraph Style Keyboard Short cut errors

    I am using CS 6 and have found the following in InCopy:
    I create short cuts for my paragraph and character styles on my Mac OS. For example "CMD" + "1" sets Paragraph style to "Intoduction."
    I open the file on my PC also running InCopy CS 6 instead of the keyboard short cuts becoming  "CTRL" + "1" for paragraph style "Introduction" as happens with InDesign they keyboard short cuts become something seemingly random, in may case "CTRL" + "S"
    As InCopy doesn't support non-numeric characters for keyboard shortcuts these short cuts no longer work. I have tried the same process using InDesign files and here the keyboard short cuts went from "CMD" + "1"  for the paragraph style "Introduction" to "CTRL" + "1." Is this a known issue or have I made a mistake along the way?
    Regards,
    Luis Leon

    Well then, if it walks like a duck…
    I’ll see if I can duplicate it here when I have some time.

  • Keyboard short cut not working in iOS 6 on iPhone

    I just tried adding a new keyboard short cut on my iPhone 4S with iOS 6 and the short cut will not stay on the phone.  I can enter it and it is added to the list of short cuts until I go back one screen, then the shor cut disappears.  This worked fine under iOS 5 and still works fine on my iOS5 iPod Touch.  Any ideas how to fix this?
    Thanks
    Fred

    I have an iPhone 4 with current iOS.
    I've noticed this over the past few months. I always notice it on the FB app. My short cuts stop working. I will check email or note. I figured restarting the phone would fix it.
    Here's the thing. Obviously I use FB a lot, but this short cut issues never happens in text messages, Whatsapp, or email. Always with FB.
    In fact I noticed that I get sluggish typing performance typing using the FB app whether I use the keyboard short cuts or not.
    Just wondering if this common among iPhone 4 users.

  • All of a sudden I can no longer open a new tab using either the icon on the tab bar, the keyboard short cut or the File menu option. I can open a new tab ONLY by clicking on a bookmark or link.

    All of a sudden I can no longer open a new tab using either the icon on the tab bar, the keyboard short cut or the File menu option. I can open a new tab ONLY by clicking on a bookmark or link

    This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
    Your system details show that toolbar in the user agent as AskTbAD2/3.12.2.16749
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • No Keyboard Short cuts or F keys working in DW 8.0.2

    Very recently, all the keyboard short cuts and F keys have
    ceased to
    function.
    I've tried the delete WinFileCache-*.dat file 'fix', but this
    does not
    solve the problem.
    Any other possible solutions?

    Very recently, all the keyboard short cuts and F keys have
    ceased to
    function.
    I've tried the delete WinFileCache-*.dat file 'fix', but this
    does not
    solve the problem.
    Any other possible solutions?

  • Zoom tool short cuts won't work in CS2

    When I use the keyboard short cuts to to zoom (ctrl ++ and ctrl -) they don't work. Any ideas why?
    Thank you
    Brad

    Are you saying they don't work at all (do nothing) or that their actions are not what you expected? If the latter, that's not unexpected because there are just too many counteracting options provided for this feature and they are not commonly understood
    You should get a zoom in/out with or without resizing the window, depending on (1)The status of the general preferences box "Zoom Resizes Window", (2)Whether the zoom tool itself or another tool is highlighted, (3)If the zoom tool, the status of the "Resize Window to Fit" box on the options bar, and (4)Whether you use CTRL alone or together with ALT, or together with ALT and the space bar.
    The General Preferences setting involving the zoom tool is overridden by the zoom tool option bar setting when the zoom tool is activated, including when it is temporarily activated by holding the space bar down along with CTRL and ALT. In these cases you must also left click for each desired zoom step, and releasing the keys deactivates the zoom tool.
    Unless the zoom tool is highlighted, the zoom tool options are not accessible (nor even visible), but their most recent settings apply for those shortcuts which use the spacebar.

  • Keyboard Short cuts missing

    I recently installed CS4 Production Premium on a new computer runing Vista 64 Home Edition. When I call up Premiere the program seems to run alright but I have no Keyboard Short cuts.

    First as some one new to the forums I’d like say how impressed I am with how quickly people responded to my question. Thank you.
    There were two recommendations, one to reinstall PP and the other suggested this wouldn’t work and said I would have to uninstall CS4 and than install fresh. In the interest of science I decided I would try to do a reinstall first, if that didn’t work, I could always do a complete uninstall/install later.
    In brief the reinstall seems to have worked and successfully restored key board short cuts.
    For those interested in the details.
    The first reinstall produced a BSD, followed by a reboot that ended with operating system not found.
    Second attempt to reinstall seems successful
    During the reinstall that disc progress report jumped to disk 3 although I hadn’t changed discs.
    After 13 minutes the install program asked for disc 2
    Disc progress lists disc 4 of 5
    Overall progress 79%
    11 minutes later installer asks for disc 3
    Disc progress reports disc 5 of 5
    Over all progress 95%
    8 minutes later list of successfully installed components.
    I mention the times because the total time to reinstall PP was 32 minutes. This seems like a long time. Perhaps this is normal and indicative of nothing.
    I don't know if the discrepancy between the disc label and the intall progress report is of any significance.
    If it is important I am working on a Prostar laptop with an i7 2.93 GHz CPU and 6 Gbs Ram. Vista home 64 bit.
    Thanks again.

  • Keyboard short-cuts and comment-enabled PDF's

    I'm running AR7.0.9 under SuSE 10.1 and I have the following problem when working with a comment-enabled document, such as the JavaScript reference manual. Once I've used the highlighting tool, whose keyboard short-cut is U, I find that I can no longer enter the letter U when composing a note. Similarly, once I've added an attachment, whose keyboard short-cut is J,
    I can no longer enter J into a note. Is this a known problem?
    Or is there something wrong with my setup?
    James Quirk

    HI all,
    I did't get any help related to this issue.
    Can anyone respond.
    Shaji

Maybe you are looking for

  • WRT1900AC and Macbook Pro Retina - refuses to connect with Wireless N

    I have the first generation Macbook Pro Retina, and just recently upgraded my D-Link D-655 for the Linksys WRT1900AC.  I also put the router on the first floor (the D-Link was in the basement) because there were some huge holes in wireless coverage I

  • How do I output a finite pulse train through multiple counters?

    Hello, I have used LabView examples to create a VI to use with my TIO 6602 that generates a finite pulse train with varying duty cycle, frequency, number of pulse, and initial delay.  I can also have it output the pulses through multiple counter chan

  • Certificates from Oracle Security Server

    Hi everyone Has anyone been able to genereate a certificate using the Oracle Security Server (OSS) and been able to use that to set up a HTTP listener to use SSL with that? If so, how???? OAS documentation goes on and on about how to install a certif

  • Unable to change credit card for cloud subscription

    I get to the edit billing ok then get a message that there is a problem on Adobe's end and to try later.  For the last 4 days.

  • Family app requests not sent

    I have charged both my kids Ipod and Ipad with iTunes gift cards. Since then (not sure if its related to the charging) when they try to Ask for a purchase, even if its a free one, I don't get any notification. It used to work before. Also, the "appro