Why do MSI's video card fans always give me trouble?

I just booted the new system and the MSI Ti4200 8x fan is squawking like a banshee.  X(
The G4MX440 I bought a while back did the same thing after only a few days and now this one is the same. I think it's time for MSI to find a new fan supplier.  :(
Now what do I do? I hate to send the video card back and wait a week until I get another one.
Mike

Quote
Originally posted by Mike V
Quote
Originally posted by twistedbrowntucker
BTW nice set-up in your signature.Hope it all goes well for you! Ti4200 aside. 8)
Thanks TBT. I wish I would have ordered two of these PC Toys IceChip VGA chip cooling kits when I bought the one I put on the G4MX440. In fact I may take it out of the MX440 and put it on the Ti4200 card.
Mike
Are you currently using the MX440? If not put it in for right now. And mod your Ti4200 later.No sense in possibly ruining a decent backup!Those PC Toys heatsink kits, they sell them here in Cincinnati at CompUSA and Microcenter.I want one.BTW I did get my MSI Ti4200 card Tuesday!I love it. Haven't used any of the games yet.

Similar Messages

  • CPU rendering why can't a Video Card do the job?

    I started noticing that the flash player rely on a processor
    more than a graphic card, I kind of was hoping that someday that
    flash would work off from video card as a rendering engine. Though
    right now flash player playing flash files seems like it puts too
    much stress on a processor for rendering flash I mean simply why
    can't the video card do the work when processor takes up like 90%
    of the job? and do the job more smoother? Just an idea I'm putting
    out for adobe staff members.

    What Portal provides is
    authentication
    authorization,
    user management,
    security ( SRAP),
    content presentation frame work ( URL Scraper provider, RSS provider and JSP provider )
    dynamic vpn ( through netlets you can integrate any tcp based network application )
    Wireless portal :-),
    and a variety of other features ..
    I don't believe app server provides all these features. Requirements of these features necessitates a portal market which the portal server addresses.

  • Does GeForce 7350LE video card fan run all the time or at certain temperatures?

    I have a HP Pavilion m8147c  Media Center with AMD Atlon 64 X2 Dual Core Processor 5600+ 2.80 GHz  3GB Ram and when running lately the monitor has started to go into sleep mode or something.Sometimes there is a warning that says something like no signal from DVI and one more but doesn't stay on long enough to read it all.I am running Vista Home Premium 32 bit.I had just installed a new game but pretty sure that has nothing to do with it as I used System Restore and backed up to a time before it was installed.At first it was only when playing games but now it happens with hardly anything running.This pc was bought in july 2007 and I have another desktop but I let my wife use one and I use the other.I opened the case and cleaned out all the dust but noticed when I started it up again the fan is not running on the video card.I don't know if it comes on at certain temps or runs all the time but I feel this is the problem.It has been on for about an hour and not come on at all.Any information will be appreciated.
    This question was solved.
    View Solution.

    captna wrote: Thanks Hanspuppa for the help you've given.I have two more questions.Why do I need the NVIDEA drivers when I will be installing a GIGABYTE card,and the Memory Interface on both cards is 64 bit,how does that affect a 32 bit Vista operating system?Just curious as I have never had any dealings with a video/graphics card before and I would think that it should be a 32 bit but since the GeForce 7350LE is also 64 bit it obviously works..I really appreciate the links and I am ordering the card now,thanks again you.For some reason I am not getting email notices when you reply but I am checking back every so often to see.
    Hello captna, Usually when you purchase a new video card or other hardware device, the drivers that are included on the CD are an older version, sometimes as much as six months old. The chipset on any Brand of a given model would be either an Nvidia or an AMD ATI.
    The chipset is the main component of the video card that controls most of the operations of the video card.
    Since all the manufacturers of the Nvidia video cards use the chipset purchased from Nvidia, they are all the same chipset for any particular model. The different manufacturers can and do add or enable features for their particular cards, but the chipset is still the same.
    Since the drivers from the manufacturer would be an older version, and Nvidia releases new versions quite often, it would be best to use the Nvidia drivers, since they would have updated fixes and sometimes features, and added support for some newer cards.
    Your reference to the Memory Interface on both cards is 64 bit, has nothing to do with your version of the operating system. It just relates to the way, and speed of the interaction of the video card with the system (buss).
    The higher the number of the Memory Interface, the more data that can be moved in and out of the video card, which results in a faster video performance. This just becomes important when playing games for the most part.
    Using the system just for web surfing, emailing and some light gaming, would not have that much effect on the system.
    More important to the system would be the amount of video card onboard memory. The Gigabyte has 1 GB of onboard memory compared to your original video card with 128 MBs of memory. This additional memory would likely show a slight performance increase in any light gaming.
    You want see much, if any difference in the performance of your system, with the exception of perhaps the light gaming performance increase, with the new Gigabyte video card over the  GeForce 7350LE. You should not  experience the heat related issue as you had with the faulty fan on the  GeForce 7350LE.
    You can go into your personal settings on the Forum and select to not receive the email notices when someone responds to one of your post. Several years ago while on the Dell Community Forum, I would receive over a hundred emails every day until I disabled this feature.
    Please click the White Kudos star on the left, to say thanks.
    Please mark Accept As Solution if it solves your problem.

  • After installing MSI GTX980 Video Card PC won't shutdown completely (Windows 7 S

    Hi all,
    I'm posting this here because it started post video card install.
    After installing a new MSI GTX980 Gaming video card install into my Windows 7 PC it won't shut down completely, monitor and keyboards all turn off but fans keep spinning and LED light on  vid card also remains on.
    It's also happening in safe mode, it also won't shut down from login screen, a Restart however works fine.
    Didn't have problem with previous card EVGA GTX780.
    Motherboard is a Z77 AsRock Extreme 9 with latest bios (1.90).
    Have reset Bios to defaults and updated Windows
    Using latest Nvidia Drivers 344.16
    Unfortunately can't test with other card as I no longer have it.
    Given it's happening in SafeMode I'm inclined to think it more hardware related then software.
    Not sure what else to try.
    Other than the above the new video card has been running flawless.
    Thanks

    Thanks for reply it appears the problem isn't related to new card thankfully as I tried another vid card and onboard vid and problem persisted.
    Sleep doesn't work either, actually both the sleep and hibernate options are greyed out in Windows.
    I scanned PC for malware and restored it to last know working point, no idea whats happened but I suppose I won't know outright if its software or hardware without a clean install.
    Specs:
    AsRock Z77 Extreme 9 motherboard
    Corsair HX PSU
    MSI GTX980 Gaming Vid card
    OSZ 256 SSD
    8GB RAM 2133Mhz
    Quote from: JLio01 on 13-October-14, 15:41:08
    Did you try to unplug your video card and see if the problem remains? Does sleep(S3) mode work fine? What's your specs?

  • Msi r6450 video card won't work

    just received a new video card and for whatever reason, my pc won't see it.  it's the msi r6450 md1gd3 card.
    I've got an older gateway desktop with 1pci express slot.
    as near as I can tell, the mb is a c51pvgm.  it's a model 5220 gateway machine using an amd athlon x2 chip 3800+. it has nvidea onboard 6150le processor.  using winxp sp2. 
    bios is set to recognize the pciexpress slot first.  fan comes on within the card but it is not being recognized in the device manager.
    thoughts?
    Thanks

    We can't support Gateway machines but just MSI stuff. Make sure it is not PCI-E 1.x as a six series Radeon and later PCI-E 2.1 and above card wouldn't work then. To be sure the vga is working test it in another machine

  • MSI GE60 VIDEO CARD ISSUE

    Hi i just bought my msi ge60 but i dont know if its normal or not my video card its running on the gtx660 not the intel 4000 when i just stand by on desktop it should run on the intelright not the nvidia ??
    the temp is on 63c its reading core 835 and shader 1671 it should lower because im not running any application????

    Quote from: flobelix on 05-November-12, 13:39:32
    Yep, already saw in FAQ
    Aha, wasn't aware that there is such FAQ
    Just checked and noted:
    http://www.msi.com/service/faq/672.html
    Q: Why is it that when I press the TURBO button the system does not overclock, instead a screen will pop up for user-defined key set-up?
    A: The scenario you encountered is normal since this model doesn’t support overclock function. Note: When the TURBO LED turns blue, it indicates that the system is under heavy loading thus system automatically switches to Nvidia dedicated graphics usage. On the other hand, when the TURBO button is pressed and user-defined key shows up, the blue light will turn off.
    So there is minor difference in what i said, its open user defined key configuration when Turbo is pressed and not 3Dmark page.
    Seems this is the minor difference between GE60 and GE70 Series.
    Noted that GE60 don't have P1 button, which seems Turbo button is assigned to this function instead.
    http://www.msi.com/service/faq/673.html
    Q: When I press the TURBO button the system will not overclock, instead I will be redirected to the 3D Mark website, is this normal?
    A: The scenario you encountered is normal since this model doesn’t support overclock function. When the TURBO LED turns blue, it indicates that the system is under heavy loading thus system automatically switches to Nvidia dedicated graphics usage. On the other hand, when the TURBO button is pressed, you will be redirected to http://www.3dmark.com wherein you can choose to engage into some GPU testing.

  • K8N neo4 platinum /sli & msi 6800gt video card problem.... urgent help!!!!

    I simply can't get the video card to work in the firts PCI-E port, however if the card is in the second port it works fine without the D-bracket locking the PC. Does someone know why this happened?, is the motherboard damaged?, or is there a solution to this problem?
    Note: D-bracket is indicating a Memory detection test problem, but as
    I said if the Video card is in the second PCI-e port the PC works fine
    Plase help does someone knows why this is happening?

    Could you add the list of your components to your signature (e.g. power suppy, memory, etc).
    I am assuming that the SLI connector card is firmly in place and set for non-SLI operation and
    that the video card only works when inserted into the slot that what would normally be used
    by a second SLI video card.   Is this correct?
    Have you tried resetting your BIOS?

  • MSI 4670 Video Card and NVIDIA/ATI drivers on K8NGM2-FID

    I installed an MSI R4670-2D512 video card yesterday and had a problem with drivers that I'd like to understand better.  What I did was uninstall all the NVIDIA drivers, install the board, install the ATI drivers, and update the ATI drivers (with reboots).  In the end, I had no LAN connection, and XP's hardware warnings (and Device Manager) showed no "Other PCI Bridge," "SM Bus Control," and "Video Controller."  Reinstalling drivers from the motherboard's CD got all those going again, but I'm wondering if that's created any underlying NVIDIA/ATI conflicts.  I've disabled GeForce 6150 under Display Adapters, leaving the 4670.  That covers the video controller, but should I do the same for the other two?  And should I have even needed any of the three?  Thanks.

    Quote from: BOSSKILLER on 22-November-08, 03:56:04
    "I've disabled GeForce 6150 under Display Adapters, leaving the 4670.  That covers the video controller, but should I do the same for the other two?  And should I have even needed any of the three?  Thanks."[/i]
    Show us what you mean.
    Actually, I misspoke: video controller and Display Adapters were in different categories.  What do you want to see?  Under Display Adapters, both the ATI 4670 and GeForce 6150 are listed.  I disabled the latter (right click, disable), so there's a red X through it now.  The three yellow '?' that were under Device Mgr > "Other Devices" are no longer there.  They were listed at the time under "Other Devices," but once those motherboard CD's drivers were reloaded they dispersed to other locations with new names and the Other Devices category disappeared.  I'm guessing one of those three is now called the "NVidia NForce Networking Controller," since when the problem arose there was only a "1394 Net Adapter" under Network Adapters.  I couldn't find the other two, hence I wouldn't know what to show you.

  • MSI MB/Video Card conflict

    ** Purchased Bundle **
    MB: MSI 760GM-P34 (FX)
    CPU: AMD FX 4130 - 4 Core - 3.8 GHz
    Memory: Kingston 8GB DDR3 - 1600
    Video: MSI R4350-MD1GD3H/LP - PCIe
    ** To go with **
    PSU: 450 Watt
    HD: 500 GB
    OS: Vista 32 Bit
    Rebuild was a breeze.
    Booted and installed motherboard drivers, no problems.
    Rebooted and tried to install graphics card drivers.
    The MSI motherboard does not recognize the MSI video card. So the proper drivers will not install.
    Device Manager shows:
    Standard VGA Graphics Adaptor
    Any advise would be appreciated.

    Thanks, but, I have the driver disk that came with the card. It just won't install properly.
    Driver installation from the disk fails (No supported device found).
    Driver update in Device Manager says (Driver is up to date). Yes, for a standard vga graphics adaptor. Not what I need.
    I presume Device Manager is suppose to display the name of the Video Adaptor, but it doesn't.
    This leads me to believe that the motherboard does not recognize the video card for some reason.

  • MSI 970a-g43 CPU fan always at 100% when fast boot or MSI Fast Boot is enabled

    I turned on fast boot in my motherboard in my BIOS but now whenever I boot into windows the CPU fan is always at 100%. I really like the performance gain from fast boot, however I can't stand the CPU fan always at 100%. The fan normally runs at ~1150rpm when its off but when its on it runs full blast ~2800rpm.
    My specs are:
    MSI 970a-g43
    AMD FX 6300
    MSI HD 7870 OC Edition (Flashed with GOP vBios)
    2x4 8gb DDR3 g.skillz ram

    I have it set to 55c smart fan control in the BIOS. With fast-boot off it works perfectly. It seems like its not lowering the fan like it normally does when its on. If I go into the BIOS and reset it it'll work fine the first time, but after that it'll do the 100% fan speed all the time.

  • Why is my macbook Slow and fan always running

    I recently upgraded to Mavericks, and since then my computer has been slow and lagging a lot. I see the perpetual spinning beach ball more than I would like. I have done everything I can think of within my knowledge to rectify the problem but it still seems slow to me. I have unistalled apps, cleared caches, run an antivirus, run onyx and cleanmymac applications. I don't know what else I can do. I also find that my fan is running constantly and when I look at the activity monitor nothing is eating my CPU, in fact it is always below 10%. Here is my most recent Etrescheck. PLEASE HELP!! I'm open to all and any suggestions. Thank YOu
    Hardware Information:
              MacBook (13-inch, Aluminum, Late 2008)
              MacBook - model: MacBook5,1
              1 2 GHz Intel Core 2 Duo CPU: 2 cores
              2 GB RAM
    Video Information:
              NVIDIA GeForce 9400M - VRAM: 256 MB
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 0 days 0:10:11
    Disk Information:
              TOSHIBA MK1653GSX disk0 : (160.04 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        L?KLN (disk0s2) /: 159.18 GB (97.69 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              HL-DT-ST DVDRW  GS21N 
    USB Information:
              Apple Inc. Built-in iSight
              Apple, Inc. Apple Internal Keyboard / Trackpad
              Apple Computer, Inc. IR Receiver
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
              com.avast.PacketForwarder          (1.4 - SDK 10.9)
              com.avast.AvastFileShield          (2.1.0 - SDK 10.9)
    Startup Items:
              HP IO: Path: /Library/StartupItems/HP IO
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
              [System] com.avast.init.plist 3rd-Party support link
              [System] com.avast.uninstall.plist 3rd-Party support link
              [System] com.macpaw.CleanMyMac2.Agent.plist 3rd-Party support link
              [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
              [System] com.sibelius.sari.plist 3rd-Party support link
    Launch Agents:
              [System] com.Affinegy.InstaLANa.plist 3rd-Party support link
              [System] com.avast.userinit.plist 3rd-Party support link
              [System] com.hp.devicemonitor.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] com.avast.home.userinit.plist 3rd-Party support link
              [not loaded] com.google.keystone.agent.plist 3rd-Party support link
              [not loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist 3rd-Party support link
              [not loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist 3rd-Party support link
              [not loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist 3rd-Party support link
    User Login Items:
              Mail
              Opera
    Internet Plug-ins:
              AmazonMP3DownloaderPlugin1017277: Version: AmazonMP3DownloaderPlugin 1.0.17 3rd-Party support link
              CouponPrinterPluginMac1.0.0.7: Version: CouponPrinterPluginMac 1.0.0.4 - SDK 10.7 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
              FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
              Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
              QuickTime Plugin: Version: 7.7.3
              AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 3rd-Party support link
              SharePointBrowserPlugin: Version: 14.0.0 3rd-Party support link
              iPhotoPhotocast: Version: 7.0
              CouponPrinter-FireFox_v2: Version: 1.1.10 - SDK 10.6 3rd-Party support link
              JavaAppletPlugin: Version: 14.8.0 - SDK 10.9 Outdated! Update
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    User Internet Plug-ins:
              Move-Media-Player: Version: npmnqmp 071503000004 3rd-Party support link
              fbplugin_1_0_3: Version: (null) 3rd-Party support link
              npBcsMcTcIO: Version: (null) 3rd-Party support link
    3rd Party Preference Panes:
              avast! Preferences  3rd-Party support link
              Flash Player  3rd-Party support link
              Growl  3rd-Party support link
    Bad Fonts:
              None
    Old Applications:
              SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
              Epson Printer Utility 4:          Version: 9.17 - SDK 10.5 3rd-Party support link
                        /Library/Printers/EPSON/InkjetPrinter2/Utility/UT4/Epson Printer Utility 4.app
              HP Device Monitor:          Version: 2.7.0 - SDK 10.5 3rd-Party support link
                        /Library/Printers/hp/hpio/HP Device Monitor.app
    Time Machine:
              Skip System Files: NO
              Auto backup: YES
              Time Machine not configured!
    Top Processes by CPU:
                   3%          WindowServer
                   1%          EtreCheck
                   0%          com.avast.fileshield
                   0%          airportd
                   0%          aosnotifyd
    Top Processes by Memory:
              53 MB          Opera Helper
              39 MB          Opera
              23 MB          Finder
              23 MB          WindowServer
              20 MB          EtreCheck
    Virtual Memory Information:
              33 MB          Free RAM
              637 MB          Active RAM
              611 MB          Inactive RAM
              278 MB          Wired RAM
              1.49 GB          Page-ins
              5 MB          Page-outs

    Installing CleanMyMac will corrupt your system. I know of no way to recover from its effects other than to reinstall OS X and other essential software. "Essential" is defined to specifically exclude CleanMyMac as well as all similarly ill-conceived "cleaning" products that are likely to have similar effects. Never install such junk on a Mac.
    Erasing your Mac will have the benefit of eradicating it, the useless Avast garbage, and Internet Plug-Ins as well.
    You are likely to need more memory. 2 GB is barely sufficient to run any OS later than Snow Leopard. Your MacBook can address as much as 8 GB and I recommend at least 4 GB.

  • MSI GAMING R9 270X fan always at 100%

    hey guys
      i am new to this forum and have a strange issue with my card. i received my new card from Scan on Saturday (15/03/2014) and followed all the correct installation steps to upgrade from my previous card, however ever since install the cooler has both fans at 3000rpm (100%) !!!
    the card is showing on CCC and MSI AB as running the fans at 18% but next to it 3000rpm...i really do not want to go through RMA and i'm hoping there is possibly a common solution i can get from you all...specs listed below:
    CPU - HexaCore AMD FX-6300, 3818 MHz (19 x 201)
    MOBO - Gigabyte GA-970A-DS3P  (AMD 970, AMD K15)
    RAM - 8GB DDR3 1600 crucial ballistix
    OS - Microsoft Windows 7 Ultimate
    PSU - corsair TX750
    GPU - MSI R9 270X Gaming 2GB OC
    CASE - NZXT TEMPEST (rev. 1)
    VGU - Hyundai IT N220W
    OS DRIVE - OCZ-AGILITY3 ATA Device  (SATA-III)

    Quote from: radier on 17-March-14, 18:30:36
    What drivers and AB version you have?
    The fans are really spinning that fast or this is only wrong read out?
    Thanks for the reply...
    Catalyst 13.12 (also tried the ones that came with the card)
    Latest MSI AB version from their site...
    The fans are running full pelt, trust me it isn't a readout issue in terms of the RPM speed being 3k. Straight from power on they're running at that speed and don't change regardless of  load... Temps are great on another note haha.
    Any ideas?
    Thanks :-)

  • Why can't update credit card info, always remind "We're sorry, something seems to be wrong on end.

    after Adobe hacking incident, I replaced with a new credit card
    but now I want to update my credit card information , in order to continue buy Adobe CC
    the website always remind me, "We're sorry, something seems to be wrong on our end. Please try again later. "
    how to fix it ?
    I confirm not the browser or network problems. I try chrome/safari/IE/firefox both Win/Mac

    When I had this exact error message a week ago when updating my CC for the same reason, I was able to get it to work in the Chrome variant CoolNovo but not in IE, but now it works in IE, so I’m not sure what is different. 
    I am beginning to think it matters if I’ve logged into the forums or Photoshop.com or into www.adobe.com using a particular browser and there’s a cookie that has either expired or not expired that is holding my password.  Having a particular security setting enabled in the browser might affect it, and whether popups are blocked or not, could to.   
    You might try deleting all the adobe.com and Photoshop.com cookies in a browser that allows selective deletions or all cookies in one that doesn’t and try different variations of being logged in to or not logged into www.adobe.com before going over to creative.adobe.com as well as saving your password or not saving your password (remember me checked or unchecked) see if one variation helps.

  • Video card fan dying, tried to replace card, computer won't boot

    This Pavillion came preinstalled with an nVidia GeForce GT 630 graphics card. The fan on this card is going bad - the card smells "burny" when I run it, the fan runs really loud and the computer is crashing while playing graphics-heavy games.
    I tried replacing it with a PNY Verto GeForce GT 730 2048 MB DDR3 card. But now, with the Verto installed, my Pavillion won't boot up, it just hangs on the HP splash screen. I cannot boot in Safe Mode nor can I access BIOS settings.
    The Verto's specs seemed like it would work in my Pavillion - PCIe 2.0, at least 300W PSU. I've been searching online for help but am unable to determine a fix for my problem. 
    Any tips?
    This question was solved.
    View Solution.

    I checked the support page for my Pavlillion and I noticed an updated driver for my computer's BIOS. I got that installed and it seems to have fixed the problem.

  • MOVED: MSI EX600 Video Card Failed

    This topic has been moved to MSI Notebook.
    https://forum-en.msi.com/index.php?topic=135900.0

    Move the entire iTunes library to the MacBook, launch iTunes with the Option key held down, and choose that library. If it doesn’t show some of the purchases, follow the instructions here or here; you may encounter a 90-day waiting period if you use the second set.
    (118762)

Maybe you are looking for

  • Backing up a pre-Time Machine Mac?

    In my previous post, I spoke about possibly buying a refurbished G4 to replace the one that had its logic board fail. Assuming that's the route I go, I was wondering, since you can't use Time Machine with a vintage computer like this one, what kind o

  • How to update one field in to ods ,data is available in psa for that field

    Dear All, The field is already has data in psa but now i want to load it into ods just assinging update rules. i was assigned at update rules and activated update rules. then what i have to do . to get the data in to ods from psa. its very urgent ple

  • External service order-pm03

    Hi, What are the step sin preparing external service order-pm03 a .with manpower b. with stockable items c. non stockable items d. how the cost sceanario to be captured. RSV

  • Feature Request: Maintain radius on rounded corner boxes when resizing

    Since I make a lot of "buttons" using the rounded rectangle tool it would be AMAZING if the corder radius is maintained when resizing using command-t. Currently the radius is squashed or stretched depending on which way I resize the box. Steps to see

  • Safari crashes with VideoBox application

    My Safari 4.0 Beta has always worked fine until I've upgraded to the final version. It did not load and the dialog box says there is a possible conflict with a plug-in of a TastyAppsAV (a software called videobox I use to capture videos from YouTube)