Why do my 5c and 5s use data when I am on WiFi? And why does it show up in regular intervals of 6 hours? Very strange.

I am really having problem controlling the data usage. It seems that iPhone 5c and 5s both use data when wifi is available. And plus, the data seems to be dumped all at once every 6 hours most of the time. I know I am neither uploading nor downloading 140MB over data at 7am. DOes anyone know how to control this?
I switched off almost all background data usage (except messages). I am not on facebook etc. What is going on?

Thanks for trying Jay's suggestion, zole. The iPhone should still be able to use WiFi to send and receive iMessages. By design though, Apple devices will turn off WiFi when the phone goes dormant (screen turns off) so if you are in the midst of downloading something or a new message comes in, the phone will be using the available mobile data by default. You can turn cellular data on or off for individual applications http://vz.to/1IuZJIM instead of completely shutting off the cellular data. In that same section, you can see what applications may be using more cellular data than others to go into that specific app for settings (for example, if Facebook is using a lot of data, go into the application's settings and make sure the video autoplay is turned to WiFi only).
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Similar Messages

HT1430 How do I turn off the data when I am not in a WiFi location? I noticed that I am using data when the phone is "on" and I am not in a WiFi situation, but not on the internet. So, how do I turn off the data?

How can I turn off the LTE data when I am someplace where there is not WiFi and I do not want my LTE running up a bill? I have tracked my usage and realize that the LTE is being used even when I am not using it, just because the phone is turned on.

Merely being on should not use any data. You must have something running - something using push notifications, or push email, prhaps?
So, you can either track down what is using the data and change it, or you could go in and disaple cellular data in your settings.
One other thing to check is
Settings -> General -> About -> Diagnostic and Usage data -> set it to "Don't Send"
Settings -> Restrictions -> Location Services -> System Services -> turn all these "OFF" (this will not affect how you use your phone at all, but will stop any outgoing location information being sent periodically back to Apple).

Why does my phone use data when hooked up to wifi in the middle of the night?

My phone and my husbands phone both get charged with data usage even though they are hooked up to a wifi in the middle of the night. It has all added up to and overage charge this month. We have never used this much data!

sandybenzi, that's a good observation. Have you downloaded 3rd party applications to your device? If so, applications can update periodically. You may access the Google play store application to verify if your applications are set up for automatic update.
For more device support, click http://vz.to/1kDL3MI
LasinaH_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

How to tell if my wifi is working and my phones not using data when Im connected to wifi

My data is sky high and I have a feeling my wifi isn't worKing... How do I tell if when I'm connected to wifi that it isn't sucking up all my data ?

If the wi-fi symbol is showing at the top of the screen, then you are using wi-fi.
Some things, like visual voicemail, use cellular data not wifi

Does imessage use data when not in a wifi conection?

how does imessage send a message? does it use the phone signal and send like a normal text message, or does it use the #g network and wifi conection? if it uses the 3g network how much data does it use?

It uses your data/wifi
Your phone knows when to switch from imessage to sms message because it knows when your texting whether or not the recipient has iOS5 or not if it does the bubbles will be blue(Data/WIFI) if is a regular text it will be green(TXT) hope this helps

IOS 5 used to allow Airplay between iPad (WiFi) and Apple TV (Ethernet) as long as they were on the same network. In iOS 6, now both the iPad and the Apple TV have to be on the same network and both have to be connected using WiFi ? Why did they change ?

iOS 5 used to allow Airplay between iPad (WiFi) and Apple TV (Ethernet) as long as they were on the same network, i.e. connected to the same wired/wireless router. In iOS 6, now both the iPad and the Apple TV have to be on the same network and both have to be connected using WiFi ? Why did they change this ? Means that the iPad and the Apple TV box both have to be in range of the wireless router when this wasn't a restriction before. Apple TV could be anywhere as long as it was connected to the same wireless router via ethernet cable. Seems like an unnecessary thing to restrict.

I have found with AppleTV that it is the IPV6 on the computer you want to access is the problem. The issue is that Homegroup on Win 7 or Win 8 requires IPV6 to work, but AppleTV won't work with IPV6. (So maybe double check you have IPV6 turned off)
So you have to make a choice - Homegroup or AppleTV.... but you can't have both, until Apple brings ATV up to date. (crazy that it does not recognise IPV6 - c'mon Apple!)
You can set up sharing individually in Win 7 or 8 and have the ATV access files that way.
Having said that, there is always the exception.. I have an old HP home server running Win8 and it services ATV - but is part of the Homegroup... have no idea why it works on both, but no other machine on the home network will talk to both ATV and Homegroup at the same time!

Differences between using Data Pump to back up database and using RMAN ?

what are differences between using Data Pump to back up database and using RMAN ? what is CONS and PROS ?
Thanks

Search for Database backup in
http://docs.oracle.com/cd/B28359_01/server.111/b28318/backrec.htm#i1007289
In short
RMAN -> Physical backup.(copies of physical database files)
Datapump -> Logical backup.(logical data such as tables,procedures)
Docs for RMAN--
http://docs.oracle.com/cd/B28359_01/backup.111/b28270/rcmcncpt.htm#
Docs for Datapump
http://docs.oracle.com/cd/B19306_01/server.102/b14215/dp_overview.htm
Edited by: Sunny kichloo on Jul 5, 2012 6:55 AM

My network is not working i am in ghana and i use MTN network but it is not working why is it like that

my network is not working i am in ghana and i use MTN network but it is not working why is it like that... pls get back to me now

It sounds as if you need to call your mobile carrier.

NFL Mobile App Used Data When Not Open

I used the NFL Mobile App last night for the first time. I connected to my WIFI thinking it wouldn't use any data. But it did anyway. And then during the night when the app was closed it used a whole lot of data on its own. I have notifications turned off. Why should this be using data when not open? And why should it be using data when on WIFI?

To have to go to settings, apps, find the app and then force stop is
a lot of steps just to stop an app. Not really an acceptable solution.
However, I re-installed the app. Opened it to make sure it worked ok. Made
sure my WIFI was on during all this. Then went to apps and did a force stop.
Took several tries to get it to stop for some reason. Later I noticed my phone
seemed to be using a lot of battery for some reason. Re-booted phone to make
sure all apps had closed. Went back in and checked the NFL app. It was no
longer stopped. I force stopped it again. Took several tries. Waited a few minutes
and checked again. It was no longer stopped. For some reason it won’t stop. So
I had to un-install it again.
Not sure why all this is happening with this particular app, but I can’t take the
chance of inadvertent data or battery usage. So it will remain un-installed until
someone tells me the problem has been fixed. It’s a shame as since this is one
of the perks of my Verizon account, I feel I have been slighted. I can’t believe I’m
the only one having this issue.
Jim

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

If the data is on a remote server (for example, PHP running on a web server, talking to a MySQL server) then you do this in an AIR application the same way you would do it with any Flex application (or ajax application, if you're building your AIR app in HTML/JS).
That's a broad answer, but in fact there are lots of ways to communicate between Flex and PHP. The most common and best in most cases is to use AMFPHP (http://amfphp.org/) or the new ZEND AMF support in the Zend Framework.
This page is a good starting point for learning about Flex and PHP communication:
http://www.adobe.com/devnet/flex/flex_php.html
Also, in Flash Builder 4 they've added a lot of remote-data-connection functionality, including a lot that's designed for PHP. Take a look at the Flash Builder 4 public beta for more on that: http://labs.adobe.com/technologies/flashbuilder4/

Do I use data when I read on my kindle app on my iPad

Do I use data when I use my kindle app on my iPad

You should only use data when you download the book. As I understand it your book is on your device and you read it from there. The only data usage I can think of is if you are doing their 'sync your book across your devices' then Device one would have to tell Device two 'she's on page 49 now'

I forgot my passcode to reset and erase the data . how i have to reset and erase data on my ipad mini

i forgot my passcode to reset and erase the data . how i have to reset and erase data on my ipad mini

Do you have a question? Is your iPad disabled?
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Is there any way to stop my iPhone use data when i hit the data limit so i don't go over the data limit

is their any way to stop an iphone 4s from using data when i hit the 2gb limit on verizon wireless this way i dont have to pay the fee for extra data
thank you

Don't know of any way for it to happen automatically, but you can still use the phone and send/receive sms with cellular data turned off.

I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!

I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!

Read what i say. Put iPhone in DFU mode. Connect with USB cable and restore.
Read:
http://www.apple.com/support/iphone/assistant/restore/

I just got a new iPhone and i set up iCloud on my girlfriend's account. To change it on settings it says delete account. Will this delete her all her data and back up data for iCloud on her iPhone and iPad?

I just got a new iPhone and i set up iCloud on my girlfriend's account. To change it on settings it says delete account. Will this delete her all her data and back up data for iCloud on her iPhone and iPad? Can i change it without deleting it? Please help.

Delete the account on your phone. This will not delete any data on her phone or iPad, or data stored in iCloud.

Why do my 5c and 5s use data when I am on WiFi? And why does it show up in regular intervals of 6 hours? Very strange.

Similar Messages

Maybe you are looking for