Why do my clips stop playing the video even though the audio continues?

While I am in Viewer, I try to play my clips that I have uploaded from iMovie (because the same jerky problem would happen when I tried to capture the video into FCE). The video would begin to successfully play, then the audio would continue and the video would stop. Why is this and how can I change this? Thanks in advance.

Hi(Bonjour)!
Welcome to the forum.
Be sure that your sequence's settings (see easy setup command in Final Cut Express HD menu) match the format for your video material (like DV NTSC or PAL or HDV) before capture anything. Pay attention to shoot with a 16 bit audio mode, not 12 bit, and use a 48kHz setting for audio in easy setup dialog.
FCE HD can only edit natively standard DV or HDV media captured on tape based camcorder.
Michel Boissonneault

Similar Messages

  • When watching youtube the video randomly jumps to the start of the video even if the cursor is not on the video.

    When watching youtube the video randomly jumps to the start of the video even if the cursor is not on the video. This happens randomly and does not seem to be a problem with the videos as they run fine. what is going on?

    Several times every day YouTube shuts down some of their servers to update stuff. Be patient if YouTube is slow, stuck or mangled. Transmissions from YouTube to your computer are done in multiple tiny packets of data and flash at a time. That's why sometimes you may get any of these scenarios: bits and pieces of text/thumbnails in weird places; sluggish loading/buffering; the spinning circle going on forever; or the player being blank. This problem could fix itself within a few hours or by the next day.
    If your YouTube continues to behave slow, stuck or strange, it's very possible that your directories of "temporary internet files" and RAM (sometimes known as "cache") are close to the maximum and just cannot take anymore, the end result being any of the above scenarios or videos that: A) come to a complete freeze; B) start/stop/start/stop in a choppy way; or C) never even make it onto your screen.
    "Temporary internet files" are tiny bits of webpages that get permanently put on your hard-drive. They will remain forever on your computer, gradually plugging it up like hair stuck in a sink drain, until you finally get rid of them once and for all. Thus, exit out of YouTube, then clear your "cache" of all its "temporary internet files", "cookies" and "history". It is best if you shutdown and reboot afterwards. You'll be amazed at how "fresh" and "new" your YouTube will be.

  • I am playing in Pogo and cannot open the games even though the homepage and others will open. The message is THE CONNECTION WAS RESET WHILE THE PAGE WAS LOADING. How do I fix this???

    I am playing in Pogo and cannot open the games even though the homepage and others will open. The message is THE CONNECTION WAS RESET WHILE THE PAGE WAS LOADING.
    All my friends are playing and it seems I am the only one have this problem.

    The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
    *[[/questions/918127]]
    *[[/questions/918028]]

  • Since about 2 weeks ago for no apparent reason, the internet on my iPad suddenly stopped working (when I open Safari, it says: "Safari cannot open the page because it is not connected to the Internet"), even though the Wifi icon in the top left corner sti

    hi

    Since about 2 weeks ago for no apparent reason, the internet on my iPad suddenly stopped working (when I open Safari, it says: "Safari cannot open the page because it is not connected to the Internet"), even though the Wifi icon in the top left corner still shows full signal. However, I noticed when I went into Wifi settings (Settings>Wifi) that there is no checkmark next to my network name (only the spinning circle icon, as if it's trying to process something). This only happens at home (I can browse the internet while connected to  Wifi at university). My other Apple devices (MacBook Pro and iPhone 4S) work perfectly fine at home.
    I've tried resetting my router, restarting my iPad, resetting Network Settings on my iPad, and tried following Hynes' instructions on this thread:https://discussions.apple.com/thread/2453187?start=15&tstart=0, but nothing has worked so far (although I have to admit that I found the instructions on that thread somewhat confusing, so there is a chance that I accidentally did not follow them properly).
    Could someone please help? It'd be VERY much appreciated.

  • My macbook 13 pro is not connecting to the internet even though the airport says it's connected. Can someone help me?

    My macbook 13 pro is not connecting to the internet even though the airport says it's connected. Can someone help me? My iphone and other macbook connect and work no problem. What steps can I take?

    Ok....
    Now go to your router's settings.  Not sure who makes your router...
    Look at wireless part of it and see how many computers are actually hooked up to it.
    Delete your computer from it (in your router).
    Restart your router.
    After your router has restarted, try to connect to it with your MB and see if you can browse the net.

  • How to unblock the payment to the vendor , even though the lot will be get

    Hi,
    we receive the material from vendor . when store people unloaded, it was get broken.
    so quality will reject the lot for the reason. but if we reject vendor will not get the payment
    since this is not the vendor mistake. he expect for the payment.
    how to unblock the payment to the vendor , even though the lot will be get reject .

    Hi
    Can you not make UD code as Partially accepted.
    Put OK material in Unrestricted
    For NOT oK material put into block stock.
    From Block stock you can move to QRNT (Quarantine storage Location - 311 mvt type) or directly move to Unrestricted(mvt type 343)
    Form here you can move material to Scrap by 551
    This will give payment to vendor & Qty can be scrapped.

  • Why do some of my playlists gray out even though the music in the list has been downloaded to my iPad ?  When they are grey I can't access them.

    I have a second gen iPad using the cloud and iTunes Match.  On several occasions ( I was not wifi connected ) several of my playlist greyed out not giving me access to them even though the music in these particular playlists have been downloaded to my iPad.  Any ideas why this happens

    No...should I? I don't have a cluttered desktop at all. Though I guess I do have some folders with a lot (thousands) of PDF's in them.  Far less than I did before, though.  I moved a bunch of stuff to a portable hard drive last week.

  • No image appears in the workspace even though the image is opened by Photoshop

    I just installed Photoshop CC 2014.2.2. from the Creative Cloud so all settings are still default, etc.
    However when I try to open a .jpeg, there is no image that shows up in the workspace. It is just a blank workspace, even though the file shows up  as "Background" to the right of the workspace.
    I have tried both "Open With Photoshop" when clicking on the .jpeg, as well as having Photoshop already open and then choosing File -> Open and browsing to the file and opening it.

    I would suspect that you may need to update you display's adapters device driver if Photoshop apears to be working but not displaying your image's layers correctly.

  • I turned on My MacBook Pro, And there is no picture on the screen, Even though the keys have lite up as if the laptop is running perfectly, All except my blank screen ??

    Any one help .... av tried the pram thing ??
    took the battery out etc etc ??? am at a loss..

    I agree Thedave413..... Just this aint never happened to me before you no .... Press the power button.. , the macbook pro makes the normal sound.... But the screen doesnt go blue, Or it doesnt do anything even though the keys soon light up as if the macbooks running perfectly, Al except my screen.. which is completely blank ???
    Can anyone help at all with some good advice ???
    As a trip to the genius bar is a 2 bus journey away from were I live....Good lord ....Oooooffftttssss...

  • Deleting the data even though the subqery fails

    Hi,
    The following query is deleting the entire data from the table temp_test, even though the table test_temp1 that we are using in the subqery is not having the column test.
    delete from temp_test where test in (select test from temp_test1 where test1 in ('d'))
    Here when we execute only sub query it is showing the error "Invalid Identifier". But when we execute the entire query it is deleting the complete data of temp_test.
    The table structure is:
    Temp_test (test varchar2(2))
    Temp_test1 (test1 varchar2(2))
    Table data:
    Temp_test is having Some data.
    Temp_test1 is having 'd' as one of it's row.
    Could any one explain me how this statement is getting executed without giving any error.
    Thanks in advance.

    delete from temp_test where test in (select test from temp_test1 where test1 in ('d'))
    is equivalent in your case to
    delete from temp_test where temp_test.test in (select temp_test.test from temp_test1 where test1 in ('d'))
    HTH
    Laurent Schneider
    OCM DBA

  • My 30 second clip stops playing with 9 frames left.  Audio and video are to 30 second mark.

    My video stops just before the end without any reason.  Seems to be related to audio track but I have replaced the audio and it still happens.  If I extend the audion beyond 30 seconds the video plays clean through.  How can I adjust for 30 second commercial?

    What version FCPX?
    Is the audio MP3? If so, covert to AIFF.
    What you're experiencing is abnormal; you shouldn't have to devise a workaround if the media is OK.
    Russ

  • I want to continue playing the video, even though I move focus to my browser.

    Premiere automatically stops playing the video immediately after I switch my focus to Google Chrome, and really any other window. Any way to disable this "feature"?

    >cheap graphics card that can't do it very quickly
    As far as I know, the graphics card has almost nothing to do with exporting... only timeline playback
    http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
    If you don't want to upgrade to CS6... export and use a media player that will run in the background

  • Why am I still unable to open videos even though I have installed the most updated version of Flashplayer?

    I have an IMAC using Safari version 5.1.10.  I have uninstalled and reinstalled flashplayer 5 times now.  I am still getting an error message "blocked plug-in" when I try to launch a video.
    I never had this issue before when installing an updated version of flashplayer

    Welcome to the Apple Support Communities
    One thing is the memory, and another thing is the hard disk space. You are telling me that you have 200 GB of free space on the hard disk, but the App Store is telling you that you have to install 2 GB of memory or more on your Mac if you want to upgrade to OS X Mountain Lion.
    First of all, open  > About this Mac > More Info, and copy "Model Identifier" here, so we can know what Mac you have got and how much memory you can install.
    We recommend to buy the memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility warranty as OWC) because you won't probably have any problem with the memory you buy there

  • Why would Sprint not unlock my iphone 4s even though the usage was way beyond "90 days"- Jan 2012 to Oct 2012, and I am living outside of America?

    I went into contract with Sprint in Jan 2012, and had to terminate my contract with them as I was moving out of the United States. When I spoke to customer service, they asked me "the reason for my termination" and I specifically told them that i was moving out of the country. They basically asked me turn in the phone to Sprint or pay $300 early termination fee. I paid them $300 so i could keep the phone. BUT, not even my international SIM card works on the phone because Sprint won't take the carrier lock off. Instead in Nov 2012 they sent me some random tax bill of $35, which the customer service hadn't bothered to tell me about.
    When I went on their support site again, this is the what I found: https://community.sprint.com/baw/message/705416
    I reached out to the again today and i am waiting for their response, but their customer service agents are SNOBS and probably going to respond with "we can't" and "we won't".
    Now, I have an iphone 4s that is fully paid for, I don't live in America, and yet i can't use. It's nothing more than an expensive paper weight.
    What should I do?

    Only Sprint can answer your questions. Unlocking is up to the carrier to which the phone is locked.

  • The scroll bar stops moving with the cursor after the frist inch or so down the page, even though the cursor keeps moving as does the page itself.

    This problem started about 4-5 days ago.
    After i scroll down a bit on a longer page, the scroll bar is still near (not at) the top. The page is scrolling at that point based only on me continuing to move the cursor in the scroll bar vertical column - even though not in line with the actual scroll bar itself. Then when I put the cursor on the actual scroll bar the page jumps back up to near the top of the page.
    Thanks for any help.

    Are you using code in userContent.css or Stylish?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    Firefox Safe mode also disables the customizations in the userChrome.css and userContent.css files.
    See also:
    *[https://bugzilla.mozilla.org/show_bug.cgi?id=787465 bug 787465] - scrollbars don't update sometimes

Maybe you are looking for