Why do my imported files or created titles always go to some random bin and not the one I want?

Everytime I import a file via right clicking > Import. It will always go to some random bin that I don't want it to. Each project it's a different bin. Even if I right click > import on the bin I want it to import into, the file will still go to some pre determined default folder. Usually one of my Footage folders a couple of layers down.
This same thing happens when created titles. I usually have to do a search to find the files. When I used CS2 and 3 I never had this problem.
Anyone else experiencing this? Is there a way to not have it go to a pre determined default bin? Or can I change that Bin?
Currently the only way I can get a file to go into the folder I want via importing is when I drag and drop it from my explorer window. I don't use the CS5 media browser because It doesn't have thumbnails.
Thoughts, solutions?
Thanks in advance.
-Switch

Close.
With this specific bin structure, if I import as you described the file imports to the Reception Bin. I tried the same proceedure with highlighting>righ clicking> and importing, files to all bin levels even to the root level not inside a bin and it still goes to the reception bin. So for what ever reason for this project I am working on now the Reception Bin has become the default bin.
This holds true for titles as well, they get created in the reception bin.
I thought it might have something to do with the fact that I presort my footage into folders then "import folder" into the footage bin. I thought it might have something to do with the last bin I created or imported became a default bin but in this scenario. The Receception bin is the second to last folder I imported/created.

Similar Messages

I have some albums that only a few tracks are recognized and others are not. The difference in the info is that the pc recognizes the tracks that say aac matched and not the ones that say aac file. how can I fix that.

I have some albums that only a few tracks are recognized and others are not. The difference in the info is that the pc recognizes the tracks that say aac matched and not the ones that say aac file. how can I fix that. I have tried to creat new file but the message unknown error (-50) pops up. Also these files have played in the past

We usually advice first to Reload web page(s) and bypass the cache in case of such problem and then do a check for extensions to see if any are causing the problem.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Other possible causes can be zooming a page or having increased the minimum font size.
*http://kb.mozillazine.org/Websites_look_wrong

Why when I set up my Country or Region on my iPhone 5, the default language of the phone is the country's and not the one I selected when I set up my preferred language?

Why when I set up my Country or Region on my iPhone 5, the default language of the phone is the country's and not the one I selected when I set up my preferred language?

Go to Settings/General/Reset and choose Reset All Content and Settings. This will erase everything on the iPhone and allow you to set it up again as new with the proper Apple ID.

Why is it that when I go to the search screen to find a particular message in a conversation it comes up with the message but when I click on it it takes me to the conversation where the most recent message was sent and not the message I wanted

Why is it that when I go to the search screen and type in a particular message I want to view, my iPhone finds it but when I click on it it only takes me to the conversation at the most recently thing texted and not the particular message I clicked on?

Never occurred to me you can search messages that way, thanks.
Another way to do it is to scroll from the most recent message to the top of the screen and tap load more messages, repeatedly till you reach the one you want.
I like your method better, but with both methods it refreshes to the most recent message.

I have created an Apple ID which has been verified but when I go to download a free app it reverts to an ols (alternate apple ID and not the one that has been verified. I do not know the password for the old Apple ID

I have created an apple ID whiuch has been verified however when I go to download an app mit reverts to an old apple ID and asks for a different password which I do not have. How can I edit or delete the old (alternate) password and ensure that it only refers to the current Apple ID when requesting confirmation. Note the old Apple iD is a gmail account and I read somewhere that you can not edit or delete gmail or me.com apple IDs? Is this the case?

Did you create a brand new account or change an existing Apple ID?

From any running subvi('s), read controls and choose the ones you want to save to file

Hi all,
I now want to read controls from any running subvi('s) and save the data into a single file. I'm using subpanel to display the running subvi and use control reference to collect all the string-typed control and save the data to a single file. While that's cheating and ugly, because the host vi usually doesn't know what controls will be there in the subvi('s).
I'm wondering if there is a way to dynamically read controls from any running subvi and display all the avalible controls depends on what subvi is running, and let the user decide which data are to be saved. I attached the vi I have now, please give any comment and I thank you very much in advanced.
-chen
Attachments:
logger folder.zip ‏86 KB

Hi thitchen,
without looking at your code:
with the VI reference you can get references of all controls on the VI's frontpanel. With that reference array you can collect all string controls in that subVI. The you should display a list to the user with the names/contents of those string controls so she/he may select which ones to save...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

My latest import photos are missing from my iphoto library but still on my ipad, how do I get them back into iphotos. I very frustrated because i just imported them from my camera and have not been able to go thru and edit the ones I want. Help please

I recently imported pictures from my camera to iphoto. I also synced my ipad. In less than 24 hours my photos are now missing from iphoto even after trying to sync my ipad again. These pictures are from a very special occasion and I did not even get time to edit. Someone help please

-Background-
My issue, which I resolved and may help you was the following:
I have an IPAD 3. I took over 5 GB of pictures on a third party camera. The car was full so I imported those pictures to my IPAD 3 and deleted them from the SD card. While on IOS 5.x, the photos on the IPAD were there under last imported.
Over the last few days, I upgraded to IOS 6. No issues.
Then, my family wanted to see the pictures from the trip. I went to the IPAD and could not find the photos. It listed 40 photos only. The last imported was there, but listed as empty. When I went into the settings>usage, it listed 5GB + of photos in the photos area. I was confused. I plugged my IPAD into ITUNES, first thinking I would get a backup asap (icloud was full after importing the photos). Then I though I would downgrade to IOS 5.
Also, itunes listed that I had 40 photos only, but 5GB of OTHER data. I was convinced the data was not lost. When I tried to browse the IPAD 3 using windows browser, the photos where NOT in the DCIM folder, so I was not able to simply "FIND" the photos and copy them to my PC.
-SOLUTION-
I downloaded third party software onto my PC called "http://www.i-funbox.com/" I fun box. I had no idea if this would work, but other forums with other issues called out similar products for iphone issues.
When I installed the program, which was free, and so far free of malware, I started to explore my IPAD file system.I found my photos, under IPAD>RAW file system>DCIM>100IMPRT.
-ROOT CAUSE-
I suspect when I upgraded to IOS 6, apple fails to register the IMPORT folder of photos as such, photos. So the file system in IOS looses sight of what is inside the last imported folder. Essentially removing them from applications such as "Photos". Why windows does not seem them, is beyond me. But the program I found did see them in raw format, and I was able to COPY them to my PC. Then I deleted them from the IPAD, because I had no other way of managing this folder in IPAD, and it was using a lot of space.

Why is my Zip file being created with size of O KB?

I have the following code
public static int createZip (String directory)
                   throws IOException {
     File path = new File( directory );
     File outZip = new File("c:\\wip\\sams9dbExport.zip");
     boolean boo = outZip.createNewFile();
     FilenameFilter filter = new FilenameFilter() {
        public boolean accept(File dir, String name) {
            return name.endsWith(".xml");
    if ( outZip.exists() ) System.out.println("File exists");
     System.out.println(" Files and filters made");
     // These are the files to include in the ZIP file
     String[] fileList = path.list(filter);
    // Create a buffer for reading the files
    byte[] buf = new byte[1024];
    try {
        // Create the ZIP file
        String outFilename = "sams9dbExport.zip";
        ZipOutputStream out = new ZipOutputStream( new FileOutputStream( outFilename ) );
        // Compress the files
        for ( int i=0; i < fileList.length; i++ ) {
            FileInputStream in = new FileInputStream( "c:\\wip\\"+fileList[i] );
             System.out.println( fileList[i] );
            // Add ZIP entry to output stream.
            out.putNextEntry( new ZipEntry( "c:\\wip\\"+fileList[i] ) );
            System.out.println("Added an entry");
            // Transfer bytes from the file to the ZIP file
            int len;
            while ( ( len = in.read( buf ) ) > 0 ) {
                out.write( buf, 0, len );
            // Complete the entry
            out.closeEntry();
            in.close();
        // Complete the ZIP file
         out.close();
    } catch (IOException e) {
         System.out.println( e.toString() );
         return 0;
    return 1;
}And I get the following output
SQL> @ziptest
File exists
Files and filters made
AH_QUERY.xml
Added an entry
myclob.xml
Added an entry
myclob1.xml
Added an entry
myclob2.xml
Added an entry
PERSONNEL.xml
Added an entry
PERS_ALG.xml
Added an entry
sampledoc.xml
Added an entry
ut_ah_query1.xml
Added an entry
ut_provider.xml
Added an entry
PL/SQL procedure successfully completed.
SQL>
But my file is created empty. I previously added a println statement in the while loop to see if it was reading and writing bytes and it was.
Any ideas?

I have the following code
public static int createZip (String directory)
throws IOException {
File path = new File( directory );
File outZip = new
= new File("c:\\wip\\sams9dbExport.zip");
boolean boo = outZip.createNewFile();So these two lines will create sams9dbExport.zip with size 0 bytes, if file didn't exist.
No need to do that....
try {
// Create the ZIP file
String outFilename = "sams9dbExport.zip";
ZipOutputStream out = new ZipOutputStream(
tStream( new FileOutputStream( outFilename ) );Probably you are looking a wrong "sams9dbExport.zip" -file. Your application will create two "sams9dbExport.zip"-files, one into wip-folder with 0 bytes, and other into default directory.
>
But my file is created empty. I previously added a
println statement in the while loop to see if it was
reading and writing bytes and it was.
Any ideas?

My current os x is 10.9.5, using final cut express vers. 4.0.1. I have imported .mov clips created with a older mac os x (lion) and converted them to import into fce. after doing this as well as putting clips on the fce timeline when playing back t.h

My current os x is 10.9.5, using final cut express vers. 4.0.1. I have imported .mov clips created on a older mac os x (lion) and when I wanted to import them into fce, a quicktime conversion window opened up and converted them (I haven't experienced this in the past). I then imported the converted quicktime clips into my fce project. After doing this I took selected clips and put those edited clips on the fce timeline. When playing the video back in the fce timeline,I noticed
1) the video wasn't playing back smoothly like the original content
2) when looking at the timecode reading of the timeline, the timecode was sputtering as well as the video and audio. I exported to quicktime just to see if that was consistent, it was.
When I play the converted quicktime content independently of fce, it plays normally (no sputtering of timecode, video and audio. Need help to resolve the sputtering playback of converted video content in the fce timeline. I've never experienced this before. Any suggestions?

When you say you converted the clips before importing them into FCE, did you convert to AIC or DV and do the converted clips match your FCE Sequence settings exactly? If not, go back and convert the original files again, using the intended Sequence settings as a guide.
-DH

When importing files into fcpx from go pro hero2, some are importing as .mov and some as .mp4. when making a multi cam clip it will only add one type, if you try and add the other it says camera clip cannot be processed.

when importing files into fcpx from go pro hero2, some are importing as .mov and some as .mp4. when making a multi cam clip it will only add one type, if you try and add the other it says camera clip cannot be processed. need to figure out why it randomly imports differently, or how to add different file tyoes to multi cam.

here is one that is imported and stays .mp4. the specs are same as original file before import.
here is one that has changed somehow during import. specs on original file are same as above, but once it is imported it changes to this in event folder, and others randomly keep the above specs.

I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

Wow. Okay...
I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
My only comment would be re: your computer specs:
BJReis wrote:
. This may be due to somewhat older equipment:
GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
4GB is right on the edge, IMHO. 16G is ideal.
I wish you luck, hang in there, and standby for more help.

I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.

I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.

That is because you don't have a web server configured and running to serve the html page. In order to see the page in a browser you need to access it using a url similar to http://localhost/~yourUserName if you are serving the page from your user account.
Prior to Mountain Lion you could go into web sharing and turn on the web server. With Mountain Lion there is no option, other than using terminal, to turn on the web server. The web sharing menu item has been removed in Mountain Lion. Apache is still on your computer but it will take a little searching these forums or the Internet to find how to turn it on.
If you want a graphic user interface to turn on/off the Apache server you could download and install a server application like xampp, http://www.apachefriends.org/en/xampp.html. I use this and it works well.

I am trying to rebuild my iPhoto library and noticed my backup contains aliases (pointers?) and not the actual file. What's the best way to rebuild my library?

I am trying to rebuild my iPhoto library and noticed my backup contains aliases (pointers?) and not the actual file. What's the best way to rebuild my library?
Facts:
In moving to a new iMac, I copied the iPhoto library to an external HDD assuming that I would point the new iMac to the backed up iPhoto Library
All worked fine when I pointed the new library but noticed that some folders contained aliases and not the original file. So when I attempt to open that photo it can't find it because the alias is pointing to another drive.
I do have all original photos from a couple of external HDDs. In the folders titled, "Originals" (from older versions of iPhoto) and "Masters" (from current iPhoto)
I'm thinking I can create a new folder and drop the original files and make that my new iPhoto library. Is there a better way to rebuild my library? I do not want to create any future aliases.
Thanks in advance for any help!

do you have a strongly recommended default "managed" library (the iPhoto preference to "copy imported items to the iPhoto library is in its checked state) or a referenced library - you have unchecked that option?
It sounds like you have a referenced library and are now experiancing one of the very siginificant drawbacks of a referenced library and one of the many reasons they are strongly not recommended
Also note that iPhoto '11 may use alises in the originals folder as part of the upgrade
It is important that we understand exactly what you have and what is not sorking - what error messages you are getting
You must NEVER make any changes of any sort to the structure of content of the iPhoto library - there are no user servicable parts in it -- and you can not rebuild yoru librtary - only iPhoto ir iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - can rebuild a library unless you are a SQL programmer and understand the structure that iPhoto uses
LN

I bought a 5th Gen Touch. I use iTunes 12 on two computers. One computer allows me to drag and drop. The other does not.The one that allows it has problems. Any idea as to why I can drag and drop on one and not the other. Both are authorized.

I bought a 5th Gen Touch. I use iTunes 12 on my two computers. I first connected the Touch to my desktop and it allows me to drag and drop mp3 files from my old Classic, which is backed up to a directory. Unfortunately, that computer has gone down before I got a chance to fill the Touch. I have the files on another computer but when I connect the Touch to it, it doesn't allow me to drag and drop the files. I have iCloud set on both systems and I have manual management check marked. I'm not understanding why it allows drag and drop on one PC and not the other when they are both set the same way. My question? What do I need to do to be able to drag and drop in iTunes 12? I didn't do anything special on the computer that allows it so I am at a loss.
Thank you!

Oh, also want to add that the PC I'm currently using is:
Windows Vista Home Premium Service Pack 2
My other PC was:
Windows 7 Ultimate
My MacBook is:
Max OSX 10.5.something (the last update available for it. .8 maybe? haha)
Not sure if this stuff is important, but I thought I'd add it.

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?
I currently run OS X 10.10.1
Now i have been trying to work on this for a while now and what i want to do should be simple but its apparently not.
Here is an example of what i want to happen.
I will have 2 tabs: Contact | Sales
Now Contacts will have the list of names and various information about a customer, While Sales will have one drop-down box for each Cell Row that will show the names of the person in tab contacts
for what i am wanting to do i cant use the data format pop-up menu because the list is edited everyday several times a day.
Now how do i do this, Excel can do this so how can numbers do it?

Hi Shegra,
Paste this into a applescript editor window and run it from there. In the script you may need to adjust the four properties to agree with your spreadsheet. Let me know if you have any questions.
quinn
Script starts:
-- This script converts column A in one table into an alphabetized list of popups. It copies the last cell in that column. Then reverts the column to text. It then refreshes popups in column A of a data table starting with a user defined row.
property DataEntrySheet : "Sheet 1" --name of sheet with popups to be refreshed
property DataEntryTable : "Sales" --name of table with popups to be refreshed
set copyRange to {}
property PopValueSheet : "Sheet 1" --name of sheet with popup values table
property PopValueTable : "Contacts" --name of table with popup values
set PopStartRow to {}
tell application "Numbers"
set d to front document
set ps to d's sheet PopValueSheet
set pt to ps's table PopValueTable
set s to d's sheet DataEntrySheet
set t to s's table DataEntryTable
set tf to t's filtered --this records filter setting on data Entry Table
display dialog "Start from row #..." default answer "" with icon 1 -- with icon file "Path:to:my.icon.icns" --a Week # row
set PopStartRow to {text returned of result}
tell pt --convert list to alphabetized popups
set ptRows to count rows
set copyRange to ("A2:" & name of cell ptRows of column "A")
set selection range to range copyRange
set selection range's format to text
sort by column 1 direction ascending
set selection range's format to pop up menu
-- popupsmade
set selection range to cell ptRows of column 1 of pt
set v to value of cell ptRows of pt
end tell
activate application "Numbers"
tell application "System Events" to keystroke "c" using command down
tell pt
set selection range to range copyRange
set selection range's format to text
end tell
tell t
set filtered to false
set tRows to count rows
set pasteRange to ((name of cell PopStartRow of column "A") & ":" & (name of cell tRows of column "A"))
set selection range to range pasteRange
tell application "System Events" to keystroke "v" using command down
set filtered to tf
end tell
end tell

Why do my imported files or created titles always go to some random bin and not the one I want?

Similar Messages

Maybe you are looking for