Why do my input languages get reset to U.S. only after restarting?

I'm using an English Canadian keyboard on Mountain Lion, and every time I restart it gets reset to U.S. only. My Swedish and Canadian input sources completely disappear. Never had this problem until I upgraded to 10.8.2.

I have the same problem. I've tried to setup language preferences under root user but it didn't help.

Similar Messages

Have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!

have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!
The configure bar gets about an 1/8 full and then just does nothing. I think its lists the update as combo update? cant remember with out checking.
I have tried to do the disk verify and repair but this has made no difference.
Please let me know what i need to do, I have reformatted the mac just to start over as was clogged with a lot of useless data, I had installed lion (10.7) from the app store previously and now cant seem to find a way to re install lion. I hope I dont need to pay for it again?

If you erased your hard drive, you'll need to reinstll OS X 10.6 Snow Leopard to access the App store. You won't have to pay for OS X 10.7 Lion again. Did you try booting to the recovery partition by holding the command and r keys down? If that's still there, you can reinstall OS X 10.7 from there.
If you're looking to install the current iTunes, you need OS X 10.6.8 at a minimum.
If you're still trying to update OS X 10.5 Leopard, you can download the combo update from here. Download, use Disk Utility to repair permissions, apply the update, then repair permissions again. That will take you to OS X 10.5.8.

Why does my password keep getting reset?

I find that about 2-3 times a week, my password to my account stops working. I have to regularly reset it. Has that happened to anyone else, and any idea as to why that would occur?

I haven't heard that so far as. How much i am aware there was a password revok that happened with some users few weeks back. But that should have been fixed by now.
Try resetting your password once again and let us know in case you face the same issue in future.

How can I get WebAS to not start-up after restarting Windows?

I would like to not have my WebAS auto start after I reboot windows.
I found of couple of options in Configuration tool but they did not stop it.
We have a firewall product that I cannot disable (per security policy), but I can terminate it once I get the desktop. However by that time WebAS has started and encounters blocks from firewall, and once this happens, half the time it causes my jcontrol.exe to result in NIETIMEOUT messages and once THAT happens I have to uninstall and reinstall EVERYTHING.
So, how can I configure WebAS to not automatically start-up after rebooting windows? I have searched help.sap.com and looked for options in Visual Admin and Configure tools.

Easier than it seems
Go to Administrative Tools/ Services in Windows.
Change Startup type of the services to Manual.
You can just sort by the 'Log On As' Column
".\SAPServiceJ2E"
or whatever you instance name is. You can always start the service from the MMC console after this.

Instances In recovery are getting recovered only after restart of server.

Hi All,
The issue I face is :There is a BPEL Process with a DB adapter which has to poll on a database.
Now my DB adapter polls,but the instance in EM remains in Recovery State.
From BPEL Service Engine even if I recover,they dont get recovered.
But,If I restart the server(SOA) and and From BPEL Service Engine if I recover,they get recovered.
SO,every Time I hav to restart the server.:-( :-(
Kindly ,suggest the solution.

The solution is either change the order of deployment or copy the FileAdapter.rar file in $ORACLE_HOME/lib location and restart the server as mentioned here.
http://soa-bpel-esb.blogspot.com/2011/04/javalangnoclassdeffounderror.html

Why does keyboard work only after restart

This is an irratic problem. I have pen/pad not mouse but same thing methinks, can open files etc but when it comes to filling in anything it will not allow, sometimes even after restart it works butthenafter abreak I find it will not allow typing again!
any ideas

connected via usb/wacom... software=10.5.8
thanks

Why does my macbook pro get hot

Why does my Macbook pro get hot while I am only on my email account? This is a recent change. It gets too hot too put in my lap. Is it a battery issue.

Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.

Z10 STL100-1 Date and Time gets reset

My Z10 STl100-1 has a strange issue...
Time and date gets reset if I Switch off or Restart the Device,
I have the latest OS (10.2.1.3247) and also tried Factory Reset.. But still the Probelms Repeating...
Someone Tell me wat can be done???

I have the same problem... any solution? I am not synchronized with automatic network settings. I have to set date and time whenever I turn off or restart my Z10.
maheshahb wrote:
My Z10 STl100-1 has a strange issue...
Time and date gets reset if I Switch off or Restart the Device,
I have the latest OS (10.2.1.3247) and also tried Factory Reset.. But still the Probelms Repeating...
Someone Tell me wat can be done???

How to get current language bar setting for input language

I am using Flex Builder 3, IE 7 and windows OS. Is there a
way to determine the current input language as set in the "language
bar"? The Capabilities class always returns "en" even after I set
Chinese ("ch") as my input language.

Hi Dragon Cao,
No need to create any customer exit variable for this ..
You have standard variable CMONTH this displays current month summation. Just restrict your Key figure with this variable.
And in properities of Key figure goto Calculations> Local Calculations> select Summation.
If you want to assign some calday at run time sure you need to create customer exit variable using Step_2 value in enhancements(CMOD).
Regards,
Rajeswari.
Edited by: mrajeswari on Aug 24, 2011 12:35 PM

Why does my Share Name ID get reset every month?

With my personal account, I prefer to be identified on the receiving end as "WIRELESS CALLER". I can change this on my account. However, once a month my Share Name ID gets reset back to my account name. After updating this one a month for the last four months, I realize the problem is not on my end.
Verizon, what's up?
Thanks.

Hello, and thank you for responding. I really appreciate it.
The steps you specified are exactly what I have been doing, yet the account resets back to my name. To get it change back to WIRELESS CALLER takes the following steps and 48+ hours.
1) Once my account has been reset back to my first and last name, the Share Name ID screen shows no specific radio button being selected, yet shows the message:
Your name is currently displayed as "WIRELESS CALLER" on Caller ID enabled devices.
2) I select the middle radio button, my actual name (using your example) and click submit.
3) Wait 24 hours.
4) I return to the Share Name ID screen and select the WIRELESS CALLER radio button, then click submit.
5) Wait 24 hours.
A caller ID device now shows my name as WIRELESS CALLER.
The indeterminate radio button and incorrect text in step 1 is the key.
Thank you.

Why does the screen background picture get reset to default when switching user

iMac with OS X 10.6.8
I have several user accounts on this iMac, each with a different wallpaper chosen from a common folder (library/desktop/nature) in the top level of the hard drive. (Which exists – can always reset background picture from this folder)
When I switch from one user account to another, the wallpaper picture, set on the previous login, appears for a moment and then is immediately replaced by the default blue.
This happens when switching from any user to another. I tried restarting the system but the problem is still there.
This problem just suddenly started and there have been no upgrades or changes to OS X.
Ideas appreciated!!

I've found the answer.
Today, the problem suddenly appeared on my other Mac, which made me look at recent apps..
I installed Team Viewer a month ago, (which is a great app apart from this) so quit it and removed it from the dock. Problem solved!!
The odd thing is that the problem appeared only after I had been using Team Viewer for some weeks.

Input language-Russian

Hi All, I want to be able to create bilingual messages (English& Russian)on my Torch (SMS, emails etc) but there is no Russian in the list of additional input languages. Amongst supported languages there are Catala, Greek, Czech etc so I don't see why no Russian... Does anyone know how to get Russian? Thanks a lot in advance

Hey Ksenia,
Language support is determined by your service provider, some service providers do not offer all Language support packs. Here is how to obtain language packs for BlackBerry: http://btsc.webapps.blackberry.com/btsc/KB13067
Cheers.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Is B1-750-1527 able to support Chinese Input Language? Didn't see that on the option.

I was not able to find Chinese as input language in the Language and Input option. Is this tablet not able to support that.

Chris:
Welcome to the Apple Discussions. Why not just use direct name forwarding, giving them the URL for your published site. To find out what that URL is select the site in iWeb and use the File->Visit Published Site menu option. When you get to the site copy the URL from the browser's URL window and use it.
If you plan on publishing additonal sites but not give them a domain name then the use the following URL: http://web.me.com/youraccount_name/site_foldername/index.html. Then if you publish a second site to the MobileMe account it won't conflict with the domain name site.
That's because when you publish a site to MobileMe an index.html file is created in the iDisk/Web/Sites folder pointing to the index.html file in the last published site's folder. Since the default URL for MobileMe is http://web.me.com/youraccountname/ (the index.html file is not necessary for the default address) it will open the last published site. If you have only one site them there's no problem. If you have multiple sites it can be a problem if you're not using the CNAME process. I prefer the direct forwarding method as it gives me more control.
OT

Keyboard "use F-keys as standard function keys" setting gets reset on system restart

Hi all,
I have set in system preferences -> keyboard to "use f1, f2 etc. keys as standard function keys" or rather I want to keep this setting set but unfortunately this gets reset on each restart-
I'm wondering what happened, this used to work initially with Lion. I may have set somewhere something that resets this on each start but I have no clue what that might be.
Machine iMac mid 2011, keyboard Apple alu keyboard with cable (pre-Lion layout).

Thanks BDAqua...sure looked like the function had disappeared over time and appreciate the confirmaion. Hard to understand why a function like that would be taken away. The program I run uses function keys f3,f7,f11 and f23(shifted f11) and I have all working okay by turning them off in keyboard and mouse menus. The f23 is causing issued in that when I use shifted f11 the screen scrolls upward instead of passing along the f23 function. Looks like I will have to work around this since the operating system will not allow the function keys to just work "standard"...thanks by the way for the welcome...!!

Xsl:param or xsl:variable gets reset.

Hi, I'm trying to keep a counter using a top level variable in xsl.
<?xml version="1.0"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:variable name="rownumber">1</xsl:variable>
And every time my xsl calls a specific template, i want to keep a counter.
<xsl:template match="row">
<xsl:variable name="rownumber">
<xsl:number value="$rownumber+1"/>
</xsl:variable>
<xsl:variable value="$rownumber"/>
</xsl:template>
However, my variable $rownumber always gets reset to the default value of "1" everytime the template is called and returns a value of "2".
Is there a work around for this? Is there a way to keep a counter in xsl? Can top level variable change?
I don't want to count the nodes either....
Thanks in advanced,
jon

You can't do that. Variables can't change. And there is no "workaround", as you put it. XSLT is not that kind of programming language. If you want to count something, you need to figure out an expression that looks at the incoming XML and determines the answer. This is often surprisingly easy once you stop writing programs that assume that statements are executed one after the other. For example, in your case it appears that you just want to count the number of "row" elements in the document. The XPath expression for that is "count(//row)". Or perhaps you want to count the number of "row" elements below the current node; that's "count(row)".

Why do my input languages get reset to U.S. only after restarting?

Similar Messages

Maybe you are looking for