Why do my podcasts sound like they are in an echo chamber?
All the podcasts I have downloaded have developed an echo effect. This includes podcasts that were downloaded prior to the development of this problem. Echo does not effect i Tunes downloads. Do I need to reset or what?
I figured it out...
Somehow, my "system preferences > sound > output" got changed back to "built in speakers" on my iMac instead of my audio interface which puts out sound through my active monitors, but I guess since the way Logic works, the output always goes back out through the interface when playing back from within Logic, so when I was playing back the MP3 on my desktop, it was coming through the built in speakers on my iMac.
So if you are having this same issue, check and make sure your audio interface is selected as your output in "SYSTEM PREFERENCES>SOUND"
PHHEWWW I FEEL BETTER!!!
Similar Messages
-
TS1631 People say I sound like I'm in an echo chamber or empty room when I'm calling on my iPhone 4S
Help! People say I sound like I'm in a tin can or empty room when using the iPhone 4S
Have you by any chance covered the little hole at the top of the phone or is there any dirt in it?
-
Periodically, the sound from my MacBook Pro speakers cuts out to where it sounds as if I am just blasting music through a pair of headphones. The start up sounds and even some normal sounds coming from my computer are at the regular balanced speaker level. I sometimes use external speakers and have not had this problem with them. This has been happening more and more lately, and for longer periods of time. I'm running 10.7.5
What frame rate/frame size/codec did you record?
How did you transfer it into FCX?
x -
When placing or receiving a call with new iphone 5 using the earpiece on the phone, the person on the other end sounds very low, like in a tunnel. Volume is as high as it will go. Earbuds work great but I can't always use them, I need to be able to do a NORMAL call without earbuds.
Update - made an appointment at Genius bar today (chadstone, Victoria, Australia).
Genius examined phone, replicated the issue and identified a malfunctioning main microphone. He noted that the reason I could still talk to the other party when I activated the 'speakerphone' function is that the speakerphone has a (second) noise cancelling microphone/speaker at the top of the handset. He replaced the phone under warranty, and offered to help me to set up the new phone. In and out in less than 15 minutes, with new phone operational.
Very knowledgable, very polite and just great service.. Thank you Apple team at Chadstone. -
This relates to an earlier question I asked: I have an iPhone and can send messages to a galaxy, but the person cannot receive them; however, I can receive messages from the galaxy. I have only had an iPhone so the problem does not relate to a change in phones. Up until about 1month ago I could send to the galaxy and they could be read. Help!
Hi there nancyfrompilot mountain,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact from the Contacts app. Send a new message to the contact.
Back up and restore your iPhone as new.
-Griff W. -
I am having a similar problem. When I start iTunes and then start Paradise Poker, all of my music plays in FF. If I start Paradise Poker first, I have no problem with itunes. I checked my playback rate and I have no third party plug-ins.
-
Help me please someone...In the middle of auditioning loops within a project, all my loops started sounding all wobbly like they are out of phase or something. what can i do to fix this. Thanks
raise your I/O buffer and raise your Process Buffer Range.
Logic Pro>Preferences>Audio>Devices>Coreaudio -
the podcasts that I have subscribed to via itunes have stopped downloading/syncing. I see new podcasts on the podcasts website but they are not listed on my list of itunes podcasts, nor do they show up when I sync to an iPod. any ideas, thanks joanlvh
Have you read for possible solutions over in the "More Like This" thread over here?----------------------->
Check out the following KB Articles: http://support.apple.com/kb/HT1329 How to use your iPod to move your music to a new computer
http://support.apple.com/kb/HT4527 iTunes: How to move your music to a new computer -
Songs sound like they have radio interference rather than music on them.
1. Songs play with the wrong title, some won't play but don't show the "can't locate icon '!'", others sound like they have picked up radio interference or play what sounds like a TV or Radio soap opera.
I've 'repaired', deleted and reinstalled iTunes, to no avail. Whether playing in order or shuffle, when it hits one of these it eventually skips thru to the next good song or closes iTunes.
I have deleted and reinstalled a good many but with 1000s thought there might be an easier way to resolve.
2. This is in a seperate topic but included in case there is any connection: Every time I add a new song or reopen iTunes it goes thru 100+ songs "Determining Gapless Playback Information"!
This uses 100% of a 320gb hard drive with hardly anything on it and takes on average 30 seconds per song = approx 50 mins!
Thx!
jimiPads are not Macs.
They are supplementary devices with limited storage.
They are not intended to fully replace pcs. -
Recently I downloaded some new music and now when I try to sync to my iPhone 4S none of the songs i downloaded are syncing to my phone and even some of the songs that were on my phone are not anymore. On iTunes on "On this phone" or whatever the songs are there but it looks like they are loading even after the sync is over. I would really like some help cause this is really annoying... Thanks!
Same here, I have a new iPhone 5S and it will not allow me to put any music on it unless I have purchased it from iTunes, even music that I own and have ripped from the CD will not upload to the phone. Really Bloody Annoying!
Should have stayed with Android! -
even though all photos look like they are the right way up, when the slideshow commences, some of them display sideways. I have tried re-rotating them - and still have same problem. Help please - need it for Saturday night !
What version of iPhoto are you using? Are you creating the slideshow directly from an album or are you using the slideshow mode?
As a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
OT -
In pages, when a create a document, potions of it, say several pages will be clumped together and it effects me editing their order. It is like they are forever joined- How do I edit my document and print just one page or move just one page?
May you open your eyes before creating a new thread ?
Your question was already asked and answered today.
https://discussions.apple.com/thread/3177074?tstart=0
Yvan KOENIG (VALLAURIS, France) jeudi 14 juillet 2011 14:40:40
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please :
Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
I updated my 3GS to os5 and set up icloud and it backed it up, although, the backup says incomplete. I turned off the contacts under icloud and they are now all gone off the iphone. How do I get them back? I feel like they are in icloud, because the contacts went to another iphone i have.
I did turn the contacts back on and it didnt work. I am hoping the wi-fi connection I am on at school is not compatible, and it will work when I get home. Thanks!
-
Makeing a person look like they are standing on the ground (instead of floating)
I have a picture of a sidewalk. I added a layer with a person standing there talking on the phone, but the person looks like they are floating (and not standing on the street layer).
I can not find where it tells how to fix this.
Thanks
BobJammer is correct-shadows often give an image "depth" and a more realistic look.
Here is one technique.
I am assuming the person on the phone is on its own layer with a transparent background.
Copy this person to a new layer.
Select a greyish color and paint over the image. I usually "lock" the layer to keep the brush from wandering.
Use the Transform Tool on either Skew or Distort (often have to use both) grab one of the corners and pull down. You are trying to get the layer to lie flat. This takes some practice.
When you get the shadow layer where you want you, you can try different blending modes and opacity levels to make it blend better. -
when i use the blade tool to cut a clip in an angle during multicam editing, i can't move the clips afterwards. it's like they are stuck together. ??????
Thanks, MirceaHi,
I'm using 10.0.7. It's like snapping won't turn off. Instead ,if i use the keyboard to nudge the clips, there's no problem. I am using that at the moment.
1. when i try to drag
2. when i nudge:
3. snapping is off.
Thanks,
Mircea
Maybe you are looking for
-
Kernel panics, crashes and other issues
hi all - i've been reading through tons of posts over the last week about my issue and trying to resolve it but can't seem to get my machine up and running consistently. it started crashing consistently on jan 10 - suspiciously the day the itunes upd
-
Include ZXVVAU04 in exit not allowing to create .
Hi SAP Gurus, for VA01 , i am using the exit V45A0002 Predefine sold-to party in sales document, I have created project and found the include ZXVVAU04 in EXIT_SAPMV45A_002. when i tried to double click on the include the follwing message is display
-
Need to determine directory name where file is to be posted dynamically
Hi Experts, In my Idoc to file scenario implementation, I need to put the file generated after mapping in a directory (via FTP) but the determination of the directory is dynamic and based on one of the fields in the incoming idoc. I mean the Idoc whi
-
Pricing unit in condition type..
Hi folks, I have a problem with " pricing unit". Iam using condition type EK01 . Under normal circumstance, the pricing unit takes the value of 1.. Suddenly, it is taking 100 as value. Can anyone give a clue from where this, Pricing Unit picks thi
-
Mac slow start up (read description)
MacBook Air 2013 13" late 2013 While turnig it off last night, the laptop took a while to turn off. Then this morning, the while logging on it was loading my user after I put my password in and then it suddently in the status bar it showed "safe boot