Why do my recieved Fax not prin automatic

everything is on line and set up, but my HP7510 does not print the recieved fax !

Hello,
The first thing I would do is follow step six in this document to set a static IP: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&cc=us&dlc=en&lc=en&product=4023246&tmp...
When it askes for DNS information, enter in Google's DNS. Preferred DNS = 8.8.8.8 Alt DNS = 8.8.4.4
Once you have done the above, powercycle (turn off and back on) the printer.  Access the web services page by pressing the ePrint button on the front panel of the printer.  The ePrint button looks like a sheet of paper with a target behind it.  Tell it to print the information page.  Once the page prints try sending yourself a fax to see if it comes through.
If that does not help, if you could provide me with the following information it would help me out. First, who is your ISP( Internet Service Provider, i.e. Comcast, AT&T, Verizon, ect.)? Second, who is the maker of your router? Lastly, what is the model number and firmware version of your router?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

  • Can you tell me why my temp tablespace can not release automatically?

    when i up the database, the temp tablespace is used by o,but after some time it is used 99.99%,even all the task are finished,it is still used 99.99%,and can not release automatically!
    who can tell me than is why?

    Are you receiving an error ?
    A "Temporary" tablespace manages it's allocation differently than a normal tablespace. The idea is to avoid the overhead of extent allocation, etc.
    Take a look at:
    http://asktom.oracle.com/pls/ask/f?p=4950:8:134496932618587661::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:108812348061,
    or
    http://asktom.oracle.com/pls/ask/f?p=4950:8:134496932618587661::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:1384603628260,
    or (these URLs don't seem to be pasting correctly)
    go to Ask Tom and search on "temporary" in the "page contains" option in advance search.
    Ken

  • Why is my iphone 4 deleting contacts automatically? They sometimes re-appear later but not always. My phone lost 1000 or so contacts today alone!

    Why is my iphone 4 deleting contacts automatically? They sometimes re-appear but not always. The phone deleted 1000 or so contacts today alone!
    Any suggestions?

    Robert, to clarify, I have the contacts section of icloud switched off. This was done some weeks ago in an attempt to stop this phenomenon. Didn't work. At one stage yesterday I had 1400 contacts but now it has swelled to 4500. Strange!

  • Why this Verisign certificate is not automatically recognized ?

    Hello,
    We used java and JSSE to acces an https URL, with a 64 bit certificate, it's ok.
    We try to use the new certificate 128 bit, it's KO.
    We need to declare this new certificate with keytool in a keystore, and to add in the java program the reference to the keystore file.
    Is it normal, why this new certificate is not automatically recognized in the cacerts ?
    thanks for your response.
    ******* Old certificate ********************
    Record ID: 14
    Issuer Record ID: 4
    Trusted: Yes
    Version: 1
    Issuer name: Secure Server Certification Authority
         RSA Data Security, Inc.
         US
    Public key algorithm: rsaEncryption
    Public key size: 1024
    Signature algorithm: md5WithRsaEncryption
    Issuer unique ID: None
    Subject unique ID: None
    Number of extensions: 0
    ******* New Certificate *************************
    Record ID: 14
    Issuer Record ID: 0
    Trusted: Yes
    Version: 3
    Issuer name: www.verisign.com/CPS Incorp.by Ref. LIABILITY LTD.(c)97
    VeriSign
    VeriSign International Server CA - Class 3
    VeriSign, Inc.
    VeriSign Trust Network
    Public key algorithm: rsaEncryption
    Public key size: 1024
    Signature algorithm: md5WithRsaEncryption
    Issuer unique ID: None
    Subject unique ID: None
    Number of extensions: 4
    *****************************

    Hi,
    we had the some problem.
    The new certificate is Class 3 Version 3, but in the cacerts file is present only the Version 1.
    The first solution was been to include our certificate in cacerts file and redistribute the cacert file to our clients (or click always in the alert pop-up). ORRIBLE!
    The finally solution (i hope) is to set up correctly the web-server.
    We have Apache 1.3.27 + mod-ssl. The installation of certificates has involved the only authenticated certificate file and private key. By the way there's another file that is not in use by default: the intermediate.crt file (in httpd.conf is indicated by tag SSLCACertificateFile). The intermediate.crt is distribuited by Verisign and it must be installed to solve the problem.
    The difference is visible in Mozilla browser too.
    I
    Best Regards.
    Rosas!!

  • HT1848 How do I sync my music on my computer to my iPhone - why does this not happen automatically when I connect?

    How do I sync my music on my computer to my iPhone - why does this not happen automatically when I connect?

    Do you have iTunes set to sync music to the device?
    Have you read the User's Guide that explains how to use the device?
    Syncing media and content to iDevices

  • Why will audiobooks not download automatically to other devices

    Why will audiobooks not download automatically to other devices?
    I always have to connect to home computer and sync!

    Audiobooks are currently a one-time only download so they are not included in the automatic downloads. You will need to sync them to get them onto other devices/computers

  • Why do the videos I shot on my iPhone 4s not sync automatically to my ipad2

    Why do videos I shoot on my iPhone 4s not sync automatically to my ipad2

    A quick Google of iCloud leads me to believe that video content is not currently part of the iCloud service. That makes sense because adding video to the mix would certainly add a lot of bandwidth strain to the service. But there is an iOS app called Video Stream ($2.99) that you might look into that adds video to your iCloud account. If you use a lot of space you may need to buy additional iCloud storage above the 5 GB of free space.
    http://www.macstories.net/reviews/video-stream-app-stores-and-pushes-videos-with -icloud/

  • Why??? Simple snapshot can not refresh automatically, but can refresh manually.

    Server 1 : Oracle 7.3.4 (as a Master site)
    Server 2 : Oracle 7.3.4 (as a Snopshot site)
    Client PC: SQL*Plus (Oracle 7.3.4 Client)
    Step 1: on Client PC, start 2 SQL*Plus dialog Windows,
    one(Window A) for <Server 1> , another(Window B) for <Server 2>;
    Step 2: on <Window A> do:
    SQL>connect scott/tiger@Server1
    SQL>CREATE SNAPSHOT LOG ON scott.dept ;
    SQL>select * from dept;
    DEPTNO DNAME LOC
    10 AAAAAA AAAAA
    20 BBBBBB AAAAA
    30 CCCCCC AAAAA
    Step 3: on <Window B> do:
    SQL>connect scott/tiger@Server2
    SQL>CREATE DATABASE LINK oracle USING 'Server1';
    SQL>CREATE SNAPSHOT all_dept REFRESH fast
    start with sysdate NEXT SYSDATE+1/(24*60)
    AS SELECT * FROM scott.dept@oracle;
    -- refresh interval: 1 minute
    SQL>select * from all_dept;
    DEPTNO DNAME LOC
    10 AAAAAA AAAAA
    20 BBBBBB AAAAA
    30 CCCCCC AAAAA
    Step 4: on <Window A> do:
    SQL>insert into dept values (50,'MMMMMM','NNNNN');
    SQL>commit;
    SQL>select * from dept;
    DEPTNO DNAME LOC
    10 AAAAAA AAAAA
    20 BBBBBB AAAAA
    30 CCCCCC AAAAA
    50 MMMMMM NNNNN
    <one or two minutes later ... ... >
    Step 5: on <Window B> do:
    SQL>select * from all_dept;
    DEPTNO DNAME LOC
    10 AAAAAA AAAAA
    20 BBBBBB AAAAA
    30 CCCCCC AAAAA
    conclusion: Simple snapshot can not refresh automatically ???????
    SQL>exec DBMS_SNAPSHOT.REFRESH( list => 'all_dept',method => 'F');
    SQL>select * from all_dept;
    DEPTNO DNAME LOC
    10 AAAAAA AAAAA
    20 BBBBBB AAAAA
    30 CCCCCC AAAAA
    50 MMMMMM NNNNN
    conclusion:Simple snapshot can refresh manually.
    How to solve this problem?????
    Thank you very much
    Zhang Ming-an

    When you are manually refreshing the snapshot as scott/tiger, and your database link was defined with a 'connect to/identified by ' clause, your login credentials will be scott/tiger. When the refresh happens from the job queue, it does not use those credentials, It uses some default set. What you should probably do is:
    1. create public database link Oracle using 'server1';
    2. as scott/tiger, create database link Oracle connect to scott identified by tiger;
    3. your automatic refresh should work now.

  • Why are my 'notes' being automatically sent to my mums email account on my MAC.. iCloud is under my email??

    My notes are automatically being sent to my mum's email account on my MAC computer... My iCloud account is under my email ?
    I have looked through my iPhone settings over and over, and there is nothing to suggest that my notes have been selected to be shared through iCloud.

    Welcome to the Apple Community.
    Check the phone isn't logged into your account in settings > Mail, contacts, calendars and check your Mac is not logged into her account under system preferences > mail, contacts & calendars.

  • Why the iPod Touch does not support GPS Bluetooth Reciever

    Why the iPod Touch does not support Bluetooth GPS.
    I had to make a jailbreak justto install and use roqyBT a Bluetooth GPS receiver,
    This aplication run witch these software:
    TomTom
    Navigon
    iGO
    Maps
    Google Earth
    Around me
    And run wich several receives as iBT 747, QSTARZ Q-1000, Holux M-1000 and my Nokia LD-3W.
    But I didn´t like to use Jailbreak, I only make the jailbreak to use a GPS bluetooth.

    Ipod touch supports bluetooth for stereo headsets/speakers and some peer to peer apps from the app store.
    Why is not a question that can be answered here.
    Only Apple would know.

  • Excise Invoice Not creating automatically

    Hello!
                      while doing Billing document using VLO1N,Excise invoice is not creating for a particular material. I checked Material Master for this particular item.I compared the Material Master for the item which is creating Excise Invoice automatically and the for the item Excise Invoice not creating automatically. Every thing is same for both the items but the excise invoice is creating automatically for one material and same Excise invoice is not creating automatically for another item.I don't know where is the exact problem is.could anyone tell me why the Excise Invoice is not creating for the particular item.
    -M.Suba

    Excise Invoice creation depends on Customizatoin of Excise group which is specific to Plant.
    Check Customization settings-
    IMG: Logistics General - Tax on Goods movements - INDIA - Basic Settings - Maintain Excise Group,
    select your excise group & choose details,
    You will observe, check box " Excise Invoice during Billing" in 'Outgoing Excise Invoice' section. This check box should be marked.
    Note: To create Billing documents - Tx :VF01 is used , not VL01N ( this is for Creating Outbound Delivery document)
    Regards,
    Reazuddin MD

  • Why is skype no longer signing in automatically?

    Hi,
    On my computer (Win XP SP3), I have skype (5.3.0.120) set to sign in automatically, but not start automatically. Normally, when I click on skype in the start menu, it automatically signs in and goes straight to the main window with all my contacts and everything. Today, when I clicked on skype in the start menu, it gave me a log in screen. It remembers my user name but it is asking me to put in my password. (The 'sign me in when skype starts' box is still checked.) Why would it suddenly ask for the password? I am not aware of any updates this morning (and past updates have not resulted in this behavior). Is this a known issue with skype today, or is it possible my computer has been compromised? Is it safe to put in my password to log in to skype?
    Thank you!
    Solved!
    Go to Solution.

    BCG wrote:
    grohle wrote:
    Hi,
    On my computer (Win XP SP3), I have skype (5.3.0.120) set to sign in automatically, but not start automatically. Normally, when I click on skype in the start menu, it automatically signs in and goes straight to the main window with all my contacts and everything. Today, when I clicked on skype in the start menu, it gave me a log in screen. It remembers my user name but it is asking me to put in my password. (The 'sign me in when skype starts' box is still checked.) Why would it suddenly ask for the password? I am not aware of any updates this morning (and past updates have not resulted in this behavior). Is this a known issue with skype today, or is it possible my computer has been compromised? Is it safe to put in my password to log in to skype?
    Thank you!
    The problem, that Skype does not start when you start windows/logon, seems to be with version 5.5, both the Standard and business versions.
    The simplest workaround is to disable the "Skype starts when I start Windows" setting and then add a shortcut to Skype.exe to the "Startup" folder.
    This implies no changes of any setting of Internet Explorer or otherwise and can easily be reversed by removing (deleting) the shortcut.
    JR Becker - Becker Consulting Global Ltd
    There still would not be an auto logon if this procedure is not followed: http://community.skype.com/t5/Security-Privacy-Trust-and/Why-is-skype-no-longer-signing-in-automatic...
    About Me You can also use a IP Camera as your camera for Skype video Example Instructions

  • Why is the software update not showing up in general settings?

    Why does my software update not show up in general settings?

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    You can no longer update to iOS 6.x, or down grade the iOS.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
    How to Upgrade to iOS 7
    The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
    There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
    To upgrade using Wi-Fi:
    Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
    Go into the iPad's Settings.
    Locate and tap "General" from the menu on the left.
    The second option from the top is "Software Update". Tap this to move into the update settings.
    Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
    Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
    To upgrade using iTunes:
    First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
    You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
    Now you are ready to begin the process:
    If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
    Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
    After canceling the dialog box, iTunes should automatically sync with your iPad.
    If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
    After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
    From the iPad screen, click on the Update button.
    After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
    After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
     Cheers, Tom

  • ERS flag not picked automatically

    hi gurus ,
    we are using srm 5.0 , extended classic scenario
    while creating a po in srm with ers vendor with account assignment wbs , the ers flag is not getting picked automatically.
    while if i use the same vendor and use account assignment cost center , the ers flag is getting picked in the po.
    so for wbs po , we are manually going to the follow -on tab in item data and ticking the ers indicator.
    what could be the reason for this ? why is the ers flag not getting picked from the vendor master.

    please reply !

  • How can I create a template that does not have automatic formatting but my own?

    I have just switch to a Mac from a PC and am having a terrible time with pages.  All I want to do is create my own template that has NO AUTOMATIC FORMATTING so I can do my own.
    There is nothing in the HELP sections on how to delete the automatic formatting.  I do not want to use any of their Outline Templates just make up my own.
    I would be so so grateful if someone could help me with this.  I took a one-on-one and his idea of how to get rid of formatting in my own template DID NOT WORK!
    Thanks, Deborah

    Deborah
    Hard to see your problem, and if there is something THAT DOES NOT WORK! it would obviously be useful to know WHAT that is and WHY you believe it does not work, so we can ACTUALLY RECOMMEND A SOLUTION.
    Just select any text and change it to whatever you want using the toolbar and/or the Text inspector.
    The Outlines are just a view of your text, in a form that lets you easily organise and move it around.
    Menu > View > Show Styles Drawer
    Reveals whatever style has been applied to a heading or text and you can update or create new styles by clicking on the small triangle next to it > Redefine style from selection
    When you are finished just save it as a Template.
    Peter

Maybe you are looking for