Why do my reminder alarms revert to 12:00 am?

My reminders sync with my Outlook tasks. Initially alarm times are correct, but then they all change to 12:00 am. Dates stay correct - only the times change. This seems to only happen with recurring tasks. Can't figure out why.

Naughty,
You are posting a Pages question in the Numbers forum. I am going to ask thie be moved to the Pages forum. In addition please post a screenshot. Based on playing with a chart in Pages, I do not think the charts take their input from a table, but rather, you enter the data by clicking the chart (to activate it), then clicking the button "Edit Chart Data":
manually editing the entries in the table:
I would think you want to have a table in Numbers to create the data, then copy and paste the data into the data table for the chart (I wouldn't type it in)

Similar Messages

Why is it when you set a calender event in outlook 2010 (in UK) with a reminder alarm for 30mins prior) and have the iphone set to keep the appointment time relative to the local country time that you travelled to, the alarm time is still at uk time ?????

why is it when you set a calendar event in outlook 2010 (whilst i am in UK) with a reminder alarm for 30mins prior to the appointment time) and have the iPhone set to keep the appointment time relative to the new country time that i have travelled to (this works OK), the alarm time is still relative to the UK time and not in sync with the local country time like the main appointment is.
Does anyone know the answer please.

This has to do with the Time Zone Support selected in your phone. If you check in Settings>Mail, Contact, Calendars, there is a setting for Time Zone Support at the bottom of the page under Calendars. If that is turned to off, the calendar should support the local time. Because time is set to Automatic (since you say the time is correct on the iPhone), it is reflecting the local time. That information comes from the carrier, not the iPhone itself. You can check, however the iPhone says that if you turn off the Time Zone support, it should reflect in the local time. Do a test, if possible, and see if that will do what you are asking.

E71 (S60) Calendar reminder alarm too long (1 minu...

Using an E71, but suspect this is an S60 issue:
Why does the Calendar reminder alarm last for an entire minute repeat the tone continuously until 60 seconds have elapsed? While other alarms like sms, email only invoke the tone once?
As an ex-Palm Treo user, I was used to being able to set the number of times I can repeat the tone (e.g. 1, 2 ,3 times).
How do I configure the phone such that the calendar reminder only triggers the (e.g. beep) tone, 2 or 3 times? I couldn't find any config on that. Is there any work-around or 3rd party software that can do this?

I also have this. My outlook calendar is the key and I like to have reminders. The fact that the alarm goes of during 1 minute sound is terribly annoying, I'd just like to have a reminder with a SMS-like sound, something I can customize at least (sound + duration + number of times it repeats...).
Anyone has info about this? I am using a E71 too.

Reminder Alarm Time on Blackberry is incorrect

When users create any appointment in calendar, as soon as the
acceptance is on his BB, the Reminder Alarm on the B pops up.
-BB shows alarmtime = 58218655
-Only users on my secondary PostOffice have this problem.
-Appts are created on the PC (I have not tried creating one on the BB)
-It doesn't matter if its accepted on the PC or on the BB.
-Syncs appears fine for creating, reading, accepting, example:
when you read the appt on the BB, it syncs that action and it
shows up as 'read' (aka unbolded) in GW on the PC.
-Alarm time is only visible after its been accepted
-PC always shows Correct Reminder Alarm time = 5 min
I found a similar issue reported in this link:
Synch with Groupwise Causes alarms to be set at 12... - BlackBerry Support Community Forums
However, the solution there was confusing to me. "install 7.0.3 HP1" But do I install that on my BES server or the PC? It didn't say what version was on the PC originally. Currently I have 7.0.3 HP3 installed on the users PCs and on My Server.
Please Help,
Should I downgrade my GW client back to HP1? On my BES server?
Is there a Post-office Setting I can check?
How can I verify what HP version I have installed on my Server components, such as my Post Offices? I believe I am running 7.0.3 on all components of my GW system.

When users create any appointment in calendar, as soon as the
acceptance is on his BB, the Reminder Alarm on the B pops up.
-BB shows alarmtime = 58218655
-Only users on my secondary PostOffice have this problem.
-Appts are created on the PC (I have not tried creating one on the BB)
-It doesn't matter if its accepted on the PC or on the BB.
-Syncs appears fine for creating, reading, accepting, example:
when you read the appt on the BB, it syncs that action and it
shows up as 'read' (aka unbolded) in GW on the PC.
-Alarm time is only visible after its been accepted
-PC always shows Correct Reminder Alarm time = 5 min
I found a similar issue reported in this link:
Synch with Groupwise Causes alarms to be set at 12... - BlackBerry Support Community Forums
However, the solution there was confusing to me. "install 7.0.3 HP1" But do I install that on my BES server or the PC? It didn't say what version was on the PC originally. Currently I have 7.0.3 HP3 installed on the users PCs and on My Server.
Please Help,
Should I downgrade my GW client back to HP1? On my BES server?
Is there a Post-office Setting I can check?
How can I verify what HP version I have installed on my Server components, such as my Post Offices? I believe I am running 7.0.3 on all components of my GW system.

6120c & Outlook - reminder alarm problem

Quick problem with appoinment alarms.
I have my appointments in Outlook on work PC.
I connect the 6120 to the PC and use Nokia PC Suite to sync it. This works fine and my diary appointments come to my phone calendar nicely.
HOWEVER on the PC I have set many all-day events. When they go to my phone, they come with a reminder alert set, for an all-day event this is 0600. So if I have a reminder such as "Rostered day off" I get woken at 6am to be told about it!
When I go to sync'd appointments on my phone, created in Outlook not ones created on the handset, there is no option anywhere to edit the reminder alarm – but the appointment shows a reminder icon is present!
In outlook, the work day is configured to start at 0800 so I had hoped that that would be the earliest alert time, but no.
Any ideas?

Hi,
Sorry to recover such an old post, but I suffer the very same problem and this is the only information I have found on the forums. I own a Nokia 5310 Xpressmusic with software v10.10, which is synced to Outlook 2010 using Ovi Suite 3.0.0.29. On every friend's birthday, I get woken up at 6am. I searched the forums, specially the Ovi forum, but this is the only reference I found and with no answer.
Is there any update on this problem? Or any configuration to be set in Outlook or the mobile, so alerts get delayed?
Thanks for any help!

Lumia 920 reminder alarms has switched to Nokia to...

My reminder alarm tones has for one reason or another switched from Windows to Nokia tones.
I can't choose reminder alarm type as it is just an option box. I am suspecting firmware update 1308 to be the cause.
How do I change it back to Windows?

DonQuijote wrote:
I am still looking forward to see Nokia coming in here to give some support.
Do Nokia have a support organization at all, if so they are experts in HIDING.
You can click on the Nokia Support link at the bottom of this page for direct support from Nokia. This forum is a peer to peer support site only.

Why won't my alarm ring

Why won't my alram ring? I have it set for a daily one and the screen shows the word "alarm" but no sound

I've been having the same problem with my new iphone 4s. I'm a seasoned iphone user. I can have it sitting on the table next to me and the screen won't light up, ring, anything. Then I can pick it up sometime and see there's a missed call, even missed texts, new voicemail, and never a sound or any notice. I've done a hard reset, but not a settings reset. I'll try that, but I'm not holding my breath. I had a 3gs for more than two years and never had a problem.

Lotus notes calendar one-way sync - reminder/alarm problem

Hello Everyone,
I haven't found a proper answer to this so posting here. Hopefully I will get a quick answer from some of the experts here.
BB Desktop Manager version: 5.0.1.37
Device: Curve 8900 4.6.1
Lotus notes version: 8.0.2
I use BIS with tmobile and have my gmail emails delivered to my device.
I am doing a lotus notes one-way calendar sync with my BB calendar. I am able to do this successfully. But the alarm & free/busy thing does not sync.
Even though I have alarm set in my notes which works perfectly and I see the notification 15 mins before the meeting on my PC. They don't show up in BB calendar. In BB Desktop Manager-> map fields, the notes 'notify me' is mapped to 'device alarm flag' but when I open the details of an entry that BDM is going to make in the accept/reject screen these fields are empty. I am using the default field mapping in the desktop manager.
All reminder works for the entries that I create directly in BB. The device calendar reminder is set properly. No issues there.
What should I change in the desktop manager so that I get a reminder in my BB for the lotus notes entry?

Hello ggap10,
You can try to enabled an advanced logging of the Calendar to see where the alarm flag is not populating.
KB01451 will guide you through the process to enable the logging.
If you need further technical assistance, you can call your service provider.
Thanks and have a great day!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Why does my Launchpad background revert to default in Mountain Lion?

This is a very minor issue but it has me curious to know the reason. When I activate Launchpad I use ctl+opt+cmd+B to cycle through the background effects and choose blurred black and white instead of blurred colour. My setting never seems to stick though. It will revert back to the default setting with the blurred colour background, most likely when I restart/reboot.
I've done some searching around for this but haven't had any luck finding out the reason for why Mountain Lion won't retain this setting. Any ideas?

If you log in automatically, a long-standing bug will cause the desktop picture to revert to the default image at every startup. The only known workaround is to disable automatic login in the Users & Groups preference pane.
If the desktop picture always reverts to a plain blue background, one of your login items may be causing the problem. The "TeamViewer" application can have this effect; see this thread. If it's not that in your case, rule out all other third-party login items as possible causes.
If you have a MacBook Pro model with automatic graphics switching, disable it temporarily in the Energy Saverpreference pane, set the Desktop picture, then reboot and re-enable graphics switching.
If none of the above applies to you, proceed as follows.
Back up all data.
In the Finder, hold down the option key and select
Go ▹ Library
from the menu bar. From the Library folder, delete the following item, if it exists:
Caches/com.apple.systempreferences
and move the following items to the Desktop, if they exist:
Application Support/Dock/desktoppicture.db
Preferences/com.apple.desktop.plist
Launch System Preferences and test. If you still have the issue, put the item on the Desktop back where it came from and post again. Otherwise, delete the item.

Why does App store kep reverting to german?

Why does App store on my Ipad keep reverting to german? Have treid sevreal times to change it and it does state on settings etc UK.

The language of the two stores (iTunes and the App Store) aren't controlled by Settings and they can't be changed - they will be in the language of the country where your account is based (if they aren't correct then try logging out of your account by tapping on your id in Settings > Store and then log back in).

Why does the string indicator revert to default value when it's not being used?

Can anyone explain to me why one of the two string indicators in the attached VI reverts to it's default value (empty) when the case structure is false?
Attachments:
LabView bug.vi ‏8 KB

String 1 is wired to the connector pane...that's why you're seeing this behavior. Disconnect String 1 from the connector pane and it will behave just like String 2. Likewise, connect String 2 to the connector pane and you'll see it get blanked out too. I'm not really sure why we empty the value when it's wired to the connector pane, but the behavior goes back to LabVIEW 8.0, maybe earlier.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Repeated reminder alarms

I've played around a bit with setting reminders but I can't seem to get it to do what I want.
For example: I want to be reminded with a pop up alarm of an event say 4 days prior to the event and also every day leading up to the event .
Do I have to set up 4 reminders one for each of the days prior to the event or is there a way to just have one reminder repeat it's self every day for a specific number of days before an event.
Setting an alarm for each of the days seems to be a cumbersome way to do it.
Thank you

You could set a separate alarm for each of the four days, but it simpler would be to set the 4-day prior alarm, and when it pops up tell it to repeat in 1 day. Do this each time it pops up until the scheduled day.
AK

Sleeping Mac and reminder/alarms

Is there a way to have any of the alarms/reminders wake up a sleeping mac?
All day, while I'm at work, my mac sleeps - so it never sends reminders. I really don't want to leave it on all the time (never sleep).
Additionally, it doesn't seem like it sends a reminder when it can. For example, even when it's woken up, if while it was sleeping it was supposed to send a reminder to my work email address, it doesn't. It still shows the message reminder, but it doesn't bother sending the email one (even though it can now).
Any thoughts/suggestions would be very helpful.

Hi caj549, and a warm welcome to the forums!
Thanks for the report, every little bit helps here.

Why do my x values revert to 0 when I enter them in iWork's Numbers?

When I am enetering my values for X and Y, whenever I enter a value for X, it reverts back to zero
I am using Pages and I opened up the Chart Data interface this way. I am normally a excel user but I figured since I have iWork, and since its free, it didn't hurt to give it a try.
Thanks in advance for your help!

Naughty,
You are posting a Pages question in the Numbers forum. I am going to ask thie be moved to the Pages forum. In addition please post a screenshot. Based on playing with a chart in Pages, I do not think the charts take their input from a table, but rather, you enter the data by clicking the chart (to activate it), then clicking the button "Edit Chart Data":
manually editing the entries in the table:
I would think you want to have a table in Numbers to create the data, then copy and paste the data into the data table for the chart (I wouldn't type it in)

Why do my custom swatches revert to RGB mode?

Hi all,
I'm a newbie to Illustrator. I have a few questions:
When I create custom swatches, I choose the CYMK option in the drop down box. However, these swatches are appearing as "RGB" mode in my swatch palette. Why is that? How do I ensure my custom swatches stay in CMYK mode?
When I later view the CMYK code for the swatches, I see that their numbers are skewed a little (for example, 34 may be 35 or 36, etc). Why is that?

When you create a new document, make sure the color mode of the document matches with the swatch color mode. i.e if you're creating a new document in RGB and then using a CMYK swatch then the numbers will be converted to RGB. Make sure the document is also created in CMYK color mode by expanding the advaced options in new document creation dialog box.

Why do my reminder alarms revert to 12:00 am?

Similar Messages

Maybe you are looking for