Why do my speakers make a loud hissing/white noise when the aux cable is plugged in at the same time my thunderbolt to dvi adapter/cable is plugged in?

I have tried this with headphones and speakers and the result is the same. I have tried this with multiple displays, multiple thunderbolt to dvi adapters, and multiple dvi cables. Does anyone know if there is a way to fix this? Thank you in advance!

What's on the other end of the Aux cable

Similar Messages

My iphone makes a loud siren like noise when i make calls or receive calls from anyone, but when i put it on speaker phone its fine, any suggestions on what to do?

Hi all,
My iphone was making and receiving calls no problem yesterday but today when i go to make/receive a call there is this really loud siren like noise on the call
and nobody can hear one another.
I put the phone on loudspeaker and its fine no problems.
I dont have my bluetooth active and i have turned the phone off and on and took the sim card out.
I always updated the iphone to 4.3.4 and nothing has worked.
My phone is within warranty but i dont know if i need to send it for repair or not.
if anyone can help i will truely appreciate it
thanks

Have you read the User Guide and taken the recommended troubleshooting steps?

Throwing stuff in trash makes loud awful white noise sound???

Just in the last few days when I throw something in the trash, instead of the normal sound it is set up to make, it will have a very loud fuzzy white noise type sound. The only way to get it to stop is to restart or shut down. You can't turn it down with the volume either, no response to that. What is going on? Is there something I can do to correct the problem? It doesn't do it all the time either???thanks

it's very interesting that you're experiencing this while playback.
I've (and many others....) got the same problem during recording, which by the way is a very painful experience or everybody that's wearing headphones..... normally people get the error message "disk is too slow" when that problem occurs!
Since there is no official and unofficial cause for this problem and also no solution currently it's hard to say what's behind it.
the only one thing i tried yesterday was playing around with the buffer size. in my case i experienced that crash yesterday a couple of times (in like 1-4 minute distances) when my buffer size was set to 128 samples. when i used a buffer size of 64 sample i dindn't get this error anymore. (don't ask me why, i can't explain it. another interesting thing is that the cpu usage doesn't show more when using only 64 samples)
try changing the buffer size, maybe it helps.....

Loud electronic screeching noise when ejecting CD

I was copying CDs to iTunes using the "Import Songs and Eject" feature (iTunes > Preferences > Advanced > Importing, set "On CD insert" to "Import Songs and Eject"). When ejecting the drive occasionally makes a loud electronic screeching noise. Is there something wrong with my drive or is this normal?
Thanks in advance,
cmy
MacBook Pro Mac OS X (10.4.5)
MacBook Pro Mac OS X (10.4.5)
MacBook Pro Mac OS X (10.4.5)
MacBook Pro Mac OS X (10.4.5)

Are you sure it is electronic? I looked at my MBP and it seems like the flaps they have covering the drive are just a little too long and rigid and make a screeching sound when ejecting a disc.
I would pop in a disk, without using iTunes, and then eject it and listen to if the noise is coming from the flap on the drive or somewhere else.

Why does my photoshop keep giving black and white lines when I use my lasso tool?

why does my photoshop keep giving black and white lines when I use my lasso tool? It has never done this before last night. It filles the Whole lasso seleted box with (what it almost looks like) black and white caution lines. then when I go to zoom out, my zoom option starts to mess up where you cant click and move your mouse to zoom in/out with ease but where you have to click to zoom out (many times).
Can ANYONE help me?

I am using CS5, WIndows 7, I am not sure how to tell if my drivers are up to, and I am more than happy to screen shot it.

Why dose my Macbook makes really loud noise ?

When it is loading a disc, doesn't matter it's has movie, music, or software in the disc, the computer always makes this loud noise, it's driving me crazy every time, is it normal ?

My Macbook's drive if pretty loud too but I don't often have a disc in there. Usually only for a software install (not very often) or to burn something (fairly often). The fan running, especially if you're watching a video stream is pretty common. If you're really concerned, do you have any friends with MacBooks or is there a store nearby that sells Macs? Go check them out and see if your's is really loud of if it's just the nature of the super drive to be that loud.
Like I said I think mine is pretty loud but I don't use it enough to let it bother me.

5s phone makes a loud sound and vibration when talking on the phone. Any advice on this?

Need help with this.. iPhone 5s makes a loud sound and vibration while talking. So bad you have to hang up and call back. I have been to Apple and they have replaced the phone 3 times and still having the same problems

My 5s did exactly as you describe only on the left side of the display.
I exchanged mine as this is unacceptable and does not bode well for long term durability (on the creaky units).
You have 30 days I think for defective units. Better make an appointment with support and get it noted for the record or replaced.

Loud, Random White Noise during call

Hello all
When I am making a video call with someone, an extremely loud sound of white noise occurs during the call.
It occurs on my side only, and the other person cannot hear the sound. It does not matter if I initiated the call or not. It also happens at random times and with or without video. Just all of a sudden, I will get an extremely loud noise...like television static.
I am at my wits' end because this has been happening for the past 2 weeks for every call I make.
Any advice would be greatly appreciated!

Hi, I am struggling with this issue for quite a while now, I was wondering whether there is any solution as of now. I have seen this problem with several notebooks (One Lenovo, one Dell, one MacBook Pro, two Vaio's). It's been an issue under MacOS, Windows and Linux alike. The only (very temporary) fix is muting my machine and resetting. Is there any solution as of yet? Is there anything I can do besides use an earpiece? I'd like to be able to use my notebook mic and speakers , since that's what they were designed for. (Other VoIP software works without the white noise issues, so I am pretty sure it's not a hardware problem)

Why does Outlook 2010 become non-responsive and freeze up when printing to Acrobat XI? What is the fix / or work around?

I just upgraded from Acrobat Reader X to Acrobat Standard XI. Now when I attempt to print e-mails from Outlook 2010, Outlook crashes and becomes "not responding". I have removed all Adobe software from my machine. Run a repair on Outlook 2010. Reloaded Acrobat XI, and still the MS application hangs up. I have spent WAY TOO MANY hours screwing around with this. I work at a multi-national company....technical... blah, blah, blah,... $$$, time..., infrastructure...., blah, blah, blah. I have read some about this problem in the forums already... it seems this problem has been in the light.
Stop holding up the show.... society has enough problems. We're supposed to be the leaders!
What is the fix, or at least, what is the work around.

Not sure how to do this except to reply to myself.
The question I asked is not "answered," but for whatever reason Acrobat XI has settled down and is working normally as before. Don't have a clue why. I did not make any further changes in anything. Thanks to those who read my question and pondered.

Is it normal for the Panels to make slight noises when applied with some pressure such as opening the and closing the Mac? It sounds like the screws are not tight enough or is it normal?

Hi, My Mac is around 2 months old, and I have recently come across a slight problem. I've experienced some slight noises happening such as when I open and close the macbook it makes some sort of clicking noises as if to say the panels are loose or have not been screwed properly... It only happens when pressure is applied e.g. when I am typing I tend to rest the palms of my hand on the two plain sections of the mac (next to the track pad) and this causes some sort of pressure to push down to the connecting panel underneath, this is when the clicking sound happens.
I don't know maybe I'm just expecting too much or it might just be what I think it is, anyway if anyone has experience this issue, feel free to share your point of views or past similar experience. Thanks.

Yes.. It's been a while, but I remember thinking the same thing!
Below are a couple of other links where folks reported the same thing!
http://discussions.apple.com/thread.jspa?messageID=5755300&#5755300
http://discussions.apple.com/thread.jspa?messageID=6552175&#6552175

Why is the video audio white noise when I share my project since I updated to 10.0.9

On the movies I created before I updated to 10.0.9, the audio prortion of the video is now white noise. The audio is fine when played back in FCP, but when i share the project it is white noise. When I burn it to BluRay the audio is gone all together. Even when I make a master file to my desktop, it still happens. The music I added to my project is fine. It just the audio that is part of the video clips that is affected. I've turned off the EQ's and Compressors I was using and I even tried moving the audio to the center channel instead of mono. No luck. Need some help. I can't figure this out.

I'm encountering the same problem as the original poster. In my case, I'm using FCP 10.1 (running on OS 10.9.1). My source file is DV video imported via FireWire from a DV camcorder. The clip's audio is fine when playing inside of Final Cut Pro 10.1, but when I share the project the audio track is just white noise. My share settings are to Apple 720p devices (the subseqent dialog boxes indicate the software has figured out it's really 640x480 video).
Here's what the QuickTime Inspector says about the source file:
Format:
DV/DVCPRO - NTSC, 720 x 480 (640 x 480)
Linear PCM, 16-bit little-endian signed integer, 48004.6 Hz, Mono
Linear PCM, 16-bit little-endian signed integer, 48004.6 Hz, Mono
FPS: 29.97
Data Size: 5.87 GB
Data Rate: 30.30 Mbit/s
Current Size: 640-480 (actual)
I tried changing from "faster encode" to "better quality", but it made no difference.
The rather dated version of Compressor I have (v3.5.3) was able to encode the clip to H.264 640x480 and the results are fine. However, it took way longer than FCP 10.1 (I think it's too old to be taking advantage of the GPU).

Extremely loud and distorted noise when on headphones - Omni 10

i returned my intitial Omni 10 as intermittently it would emit EXTREMELY loud noises - electronic, digital noises when on headphones. So loud were these emissions,,i was left with a ringing inmmy ear. i received a replcement, but have the same issue.
This happens with various headphone types and all the drivers on the device show sas up to date. i can see now other reports of this, yest this is the SECOND Omni 10 I have had with the same issue.
Please advise.
Peter

Hi Peter .
try to contact with the headphone manufacturer ,if it is still something wrong with
you second one .
[edited post by Moderator]

Why does Windows 7 make a UserName.V2 profile folder when that's not specified in the AD account

We're still a XP/2003 shop, and I'm testing out Windows 7 with our Roaming Profiles and folder redirection. So far everything looks to be working great, but have a question regarding the profile. This test user has
\\Server\Profiles$\TestUser in their AD account as the profile path. That folder was empty before logging on to the Windows 7 machine. When I logged off the Windows 7 machine,
\\Server\Profiles$\TestUser is still empty, but now there is a
\\Server\Profiles$\TestUser.V2 which appears to have the users profile in it.
Can someon explain why it didn't use the folder that already existed? Also, once we move to 7, will I have to go through each AD account and append a .V2 to the end of each profile path?

Hi,
You can create the .v2 folder manually or let the user create automatically when logging on.
Niki
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Niki Han
TechNet Community Support

Why does my iPod make a bloo-bloo-bloop noise and then start playing random tracks from the library instead of the playlist?

This happened once before and seemed to sort itself but I was teaching my class and it kept doing it in the middle of tracks in the playlist. Should I restore and then reload everything?

That sound is either shake to shuffle or a "Your-music-is-corrupt-error".
I believe Apple has a support article on this issue. It means the iPod has encountered an error with your files. You will need to restore your iPod. If the trouble is persistent, there might be a problem with a singular file you will need correct this issue. If the problem still exists take it to an Apple store

My new MacBookPro makes a low grinding noise when starting from shutdown. It interferes with the normal startup music. Is this normal or should I take it back to the store, please? Thank you. Colin.

My MacBookPro makes a low grinding sound when it starts up from shutdown. Is this normal or should I return it to the store. The sound is not unlike the CD drive starting in my old computer. It kind of creeks. Thank you. Colin.

If it is a brief sound, perhaps a half second in duration, it may very well be the OS checking the internal optical drive. That is part of the OS startup process which is normal. Start your MBP and put your ear next to the optical drive and see if this is the case.
Ciao

Why do my speakers make a loud hissing/white noise when the aux cable is plugged in at the same time my thunderbolt to dvi adapter/cable is plugged in?

Similar Messages

Maybe you are looking for