Why do my tabs become tiled windows without input from me? I have to double-click the tab to make the windows disappear, sometimes more than once. This is annoy

This happens when I have several tabs. I'll click another tab and a tiled window appears with one window being the page of the tab and the other one the tab beside it. It's become quite annoying.

Hello,
In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thanks!
Curtis

Similar Messages

I'm trying to change my secret question because I forgot to answer. Followed all the instructions, but not yet I receive a message to let me change the answer, I tried more than once, but without an answer

I'm trying to change my secret question because I forgot to answer.
Followed all the instructions, but not yet I receive a message to let me change the answer, I tried more than once, but without an answer

See this thread:
https://discussions.apple.com/message/23280567#23280567

When I have multiple tabs open I have to double click the back button. Is this normal?

Running Windows XP Professional all latest updates. I can go back to previous page by closing current tab or by clicking twice on the back button. If I have no tabs open I can go back by clicking the back button once.

Nope, that isn't normal.
Do you have that problem when running in the Firefox SafeMode? ''A troubleshooting mode.'' 
You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

After upgrading to Windows Itunes 10.5, I have to double click to open a playlist. Why?

Why do I get a No Enter Sign when left clicking a playlist? No I have to double click the playlist to get it to come up!

same here.

When I double-click the tab bar, FF4 just resizes the window but does not open a new tab

When I double-click the Tab Bar, FF 4.0 just resizes the window but does not open a new tab. It happens when Menu Bar is disabled (not ticked).

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] 
 
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. 
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions. 
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") 
Your plugins list shows outdated plugin(s) with known security and stability risks.
* Shockwave Flash 10.0 r32
* Java Plug-in 1.6.0_03 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

Why would aperture load more than once?

I understand that when I first load my RAW photos into Aperture it needs to generate a preview and so that's why it slows down and shows me "loading...". If I want to bypass this I can use quick preview mode. That's how I understood it so far. But I don't understand why it would need to load again at a later time? If I browse elsewhere and come back to this project, it'll start loading again. Does Aperture for some reason deletes the preview?

1) How do I force aperture to generate preview for everything, and not one by one. I'd rather go away and let the computer do its thing for a while than get disturbed every time I hop to the next photo.
You can select all images in the Browser and use the command "Photos > Update/Generate Previews" (Update will turn into "Generate", if hold down the ⌥ alt/options key). This way you can generate the previews over night.
2) Also this still doesn't explain why it needs to be done more than once? Why would it generate the preview again if I haven't changed any adjustments etc?
It will only keep and store the preview permanently, if you have enabled the sharing of previews in the "Preferences > Preview" tab. If you do not enable this, Aperture will not store the previews, to save space.

Statechart module: Using a master statechart to launch a slave statechart more than once without getting Error 1100 at Obtain Queue (No object of that name was found)

Hello,
I am trying to create a project using the statechart module, and one of the techniques I am trying to use is a "master-slave" statechart structure, illustrated by the code I have attached to this post (you probably need the statechart module installed to look at my example code). The problem I have recently discovered is that the slave statecharts cannot be launched more than once without raising an Error 1100 at Obtain Queue. I have gathered from a few other posts that the cause of this error is the fact that the First Call primitive is used by the Statechart module to initialize the statechart when it is first run. This works fine for the first launch of the slave statechart, but the second launch and subsequent launches of the statechart fail on Error 1100, since the First Call primitive won't let the statechart initialize (the First Call primitive tells the statechart it has already been initialized (this isn't the first call), and the External Trigger function then tries to send an external trigger to a queue that doesn't exist).
What I can't gather from those posts is the correction I need to make to get this design to work. I tried to send the slave statecharts a boolean flag for the "Init?" terminal, to force a reinitializing of the slave statechart. I couldn't get that to work. I tried to not load the slave sub VI as a slave sub VI, and launch it using some VI Server code, so that maybe the slave sub VI would be loaded and unloaded, therefore causing the statechart to properly initialize, but I couldn't get that to work either. What correction should I make? How do I get this to work?
I really want to use this design pattern, first of all since I wrote a lot of code already with this structure, and second of all, it makes a lot of sense to me. How do I make it work? If someone could post a version of my code that functions the same, but without the error, I would appreciate that. If you don't have time for that, but would be able to outline the steps I need to take to get it to work, that would be helpful, as well.
Thanks to anyone for any assistance they can provide. If you need any other information, please let me know.
Attachments:
Statechart Sample.zip ‏431 KB

Thanks, Deborah. I tried this approach out, and it turns out you can't just wire a TRUE to the "Init?" terminal. You have to wire a TRUE for the first run of the slave statechart, and then it has to become a FALSE. If you wire a TRUE, it will constantly try to reset the statechart, which doesn't work.
The master statechart has to keep track of whether it has called the slave statechart, and communicate that to the slave statechart. On the very first call of the slave statechart, the "First Call?" function inside of the "Run Statechart" function will give a TRUE, which initializes the statechart properly, and then gives a FALSE from that point after. After that, the "First Call?" function doesn't work anymore (it will always return FALSE), and an initial TRUE, with subsequent FALSE values, has to be provided manually.
I attached a version that does this, which appears to work. Let me know if it doesn't work for someone, or if you have a better idea to implement the correction.
Thanks to everyone for the replies!
Attachments:
Master-Slave Statechart Sample.zip ‏439 KB

After the latest update to FF13, I double click the bookmark button and the window won't open so I can edit.

When I double click the bookmark button (star) a window always drops down so I can edit the bookmark or place it into the folder I want. Now after the latest update to FF13 (june 2012) I can click once and the page is bookmarked to the "unsorted" folder, but when I double click nothing happens. 1) I restarted FF, didn't help 2) I rebooted computer, didn't help.

Thank you very much for pointing me in the right direction. I had 5 extensions installed. I disabled all of them then restarted FF. My bookmark window started working again. Then I enabled each extension one at a time to find the culprit. It was "Compact Menu 2 version 4.3.1". It's a handy extension for me, but I can live without it till they have a version that will work for me. Thanks again.

Know why Premiere Elements 3.0 won't start when I double click the icon?

I have Windows Vista 32 bit. I have Premiere Elements 3.0 and the 3.0.2 patch. When I double click the icon, it won't load. I uninstalled and reinstalled the app but it still won't load. It worked as recently as last week. I had some virus issues so I took my laptop to Geek squad and they "fixed" the issues.
I never had this problem with Premiere before. Anybody know what might be causing it not to start?
I have been considering an upgrade. I see that they are up to version 9. Will version 9 even work on Vista?

It depends.
What do you mean by "I never had this problem before"? Do you mean Premiere Elements worked fine until the Geek squad restored your computer?
Unless they totally wiped your hard drive and reinstalled your operating system, they may have patched but not totally fixed your problem.
Or it could be that your computer just needs a good cleaning and defragging. Assuming you've got adequate power and a good 30-50 gigabytes of free defragmented space on your C drive.
But there's a very good chance that, if you've re-installed version 3 and it still won't run, then version 9 won't run either. After all, if you still haven't remedied yoru core problem, a new vehicle isn't likely to make any difference, right?
Still, there's no harm in trying. Why not download free trial and see?

Why do I need a membership to install Lightroom 5 when I have paid already for the software and need to activate it and I will be finished?

Why do I need a membership to install Lightroom 5 when I have paid already for the software and need to activate it and I will be finished?

you don't need a cc subscription to use the purchased copy.
download the installation file and use your serial number to activate when given the licensing option during installation. you should install 5.7 instead of installing 5.0 and updating.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

My iPhone 5 won't send texts without wifi, even when I have 4G. It also won't make calls. Any ideas?

My iPhone 5 won't send texts without wifi, even when I have 4G. It also won't make calls. Any ideas?

Do you have a cellular plan with data and SMS activated?

How can i purchase a macbook air in Nigeria? apple has no shop in the entire country and independent dealers charge ridiculously sometimes more than double the prices of mac products without guarantee of getting it with required specifications. its sad cl

how can i purchase a macbook air in Nigeria? apple has no shop in the entire country and independent dealers charge ridiculously sometimes more than double the prices of mac products without guarantee of getting it with required specifications. its sad cos Nigeria has a very large apple market plus phones and most recently ipads especially. its been frustrating trying to get a macbook, even have to wait for when someone will travel out of the country, then you send the person(thats if you have the money at that time). Please somebody help inform apple maybe they can do something about this, its really disappointing.

This is a user-to-user technical support forum. You're not addressing Apple here. Use the apporpriate link on fhe Feedback page to let Apple know how you feel:
http://www.apple.com/feedback

Using numbers 2.3 how do i split windows to view more than 1 spreadsheet at a time?

using numbers 2.3 how do i split windows to view more than 1 spreadsheet at a time?

Hi seth,
Numbers vocabulary:
Spreadsheets (aka: Document)
contain one or more Sheets
on each of which may be placed one or more Tables
each of which contains one or more cells
each of which may contain either data or a formula.
Spreadsheets open in separate windows. Depending on the contents of each spreadsheet, and the scale at which you want to see it (and the size of your display), you can view more than one spreadsheet in the same manner as you can view more than one of any kind of document—open two documents in separate windows. Resize the windows to allow both to be viewed at the same time. Place and scale the individual documents to permit viewing the desired part of each
Sheets within the same document cannot be displayed simultaneously. You can make and open a copy of the document, then open and view both copies as described above, but this introduces new opportunities to edit the wrong copy. You could Copy a Table from one part of the document, open Preview and go File > New from Clipboard to create a PDF copy of that table (readable, but not editable), and view the spreadsheet and pdf documents as described above.
Tables can be rearranged, or have rows or columns (or both) hidden to permit simultaneous viewing of selected parts of both.
A Table can have Table > Freeze Header Rows and Table > Freeze Header Columns set to keep these rows/columns visible as the rest of the table is scrolled. Or can have a range of rows (or columns) hidden to allow viewing of rows (columns) adjacent to that range visible on the same screen.
Numbers does not support freezing of rows or columns other than Header rows and Header Columns.
Regards,
Barry

Performance... Why a function column in a view is executed more than once...?

Why a function column created inside a view is executed more than once when called more than once?
EXAMPLE:
create or replace view aux1 as
date_column,
any_function(date_column) column1
from any_table
create or replace view aux2 as
column1 c1,
column1 c2,
column1 c3
from aux1
select * from aux2
It will execute 3 times the function any_function... logically the value will be the same for all columns...
I understand why!... are 3 calls... but...
Why not to create a "small" verification and if the function column was execute replace the second, the third... value? ... instead of execute 3, 4... times...
tks
Braga

Actually, this is more than a performance issue. This is a consistency problem. If the function is NOT deterministic then you may get different values for each call which is clearly not consistent with selecting 3 copies of the same column from a row. Oracle appears to have fixed this in 9i...
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.2.0 - Production
With the Partitioning option
JServer Release 8.1.7.2.0 - Production
create view v1 as select dbms_random.value(1,100) r from dual;
create view v2 as select r r1, r r2 from v1;
select * from v2;
          R1           R2
          93           74
Connected to:
Oracle9i Enterprise Edition Release 9.0.1.3.0 - Production
With the Partitioning option
JServer Release 9.0.1.3.0 - Production
create view v1 as select dbms_random.value(1,100) r from dual;
create view v2 as select r r1, r r2 from v1;
select * from v2;
          R1           R2
          78           78Richard

When i double-click the mozilla icon, it doesn't start. In the task manager i noted that the process "firefox.exe" appears and desappear after 5 seconds. The problem remains in mozilla safe-mode, but not in windows safe-mode. Thks!

Yesterday i installed the firefox 6.0 on my windows 7 computer. When i double-click the mozilla icon, it doesn't start. I opened the task manager and noted that the process "firefox.exe" appears and desappear after 5 seconds. I tried to start mozilla in safe mode but the problem remains. The only way to use mozilla in my computer is restarting the windows in safe-mode. Last thing: i already tried to reinstall the program. Please help me!

I'm also using Windows 7 on a Lenovo U310 laptop.

Why do my tabs become tiled windows without input from me? I have to double-click the tab to make the windows disappear, sometimes more than once. This is annoy

Similar Messages

Maybe you are looking for